|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] Bridges are not working
Hi,
I have been using xen with debian etch during two years. I had some problems
during the initial steps, but after that the system was working without any
problem.
Last week I upgrade the debian Lenny and my domU stopped to work (network)
and I'm really lost.
My configuration is simple. I have a box with two nics. In one nic I have dom0
(attached to a network) and in the other nix I have domU (attached to another
network).
domU boot, up the interfaces but no network. No packed throw the bridge.
my brctl show is:
bridge name bridge id STP enabled interfaces
eth0 8000.001422757b2c no peth0
eth1 8000.000423a8b773 no peth1
vif6.0
the important part of my sxp file is:
(network-script 'network-bridge netdev=eth1 bridge=eth1')
in domU the interface is eth1
on of the things that I don't like is that doing a tcpdump in the interface
peth1, I got that there's traffic, but:
14:50:04.222421 STP 802.1d, Config, Flags [none], bridge-id
806f.00:13:1a:a9:b3:00.8007, length 43
message-age 1.00s, max-age 20.00s, hello-time 2.00s, forwarding-delay
15.00s
pay attention with the bridge-id 806f.00:13:1a:a9:b3:00.8007, not showed in
brctl.
So, please any idea what I'm doing wrong, or what's happening?
I'm running:
ii xen-hypervisor-3.2-1-i386 3.2.1-2
ii xen-linux-system-2.6.26-2-xen-686 2.6.26-15lenny2
ii xen-utils-3.2-1 3.2.1-2
ii xen-utils-common 3.2.0-2
ii xenman 0.5-2.1
ii xenstore-utils 3.2.1-2
ii xenwatch 0.5.2-1
best regards,
Leo
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] Bridges are not working,
Leopold Palomo-Avellaneda <=
|
|
|
|
|