WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubu

To: "Mr. Teo En Ming \(Zhang Enming\)" <space.time.universe@xxxxxxxxx>
Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla)
From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
Date: Sat, 12 Sep 2009 23:28:51 -0700 (PDT)
Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Delivery-date: Sat, 12 Sep 2009 23:29:22 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1252823331; bh=MpiLe5rurpof7H1M4ulRRb7ZOsN1Zcca5uSxPWxxwxc=; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=ezcJS25k1XviWUVjNlgWxjSH005AMpUIOZjRhcEi3XX/mw91IjD5hZDy6AN0smbZG2X5aPVTSJB2aAxu2Hax3yBnFo4c5ZwlJ1KAzlTGPDp2vjXqG0VgMNkeC0sbuJTX0ydsLs5K14KevfS01V4Jq6j5TMfjQAaomzKAfyk6pUY=
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=1Bkt7ayOO0dXjbvGUBqzysofKwwpj4pFfGdtvHYRtukA+HP5VSyoP3yqWxGYsAXJU2jBfxxTpVUFwWORUet2iZgmrpH871/NpDRuFg9yMrqWlQoL/ePZzWO0pjoy49rC7iId2gEFxkjt7zNYL9A/TeN28Y35/mJ5NQTi/pS0wCw=;
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <f712b9cf0909121654g27c6649fkbe2f340fe5eb4a7e@xxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
If you mean as  Xen Dom0 enabled under Xen 3.4.1, then
2.6.31 works fine on F11,F12,Ubuntu 9.04 Server.

Boris.

--- On Sat, 9/12/09, Mr. Teo En Ming (Zhang Enming) <space.time.universe@xxxxxxxxx> wrote:

From: Mr. Teo En Ming (Zhang Enming) <space.time.universe@xxxxxxxxx>
Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla)
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>, "Konrad Rzeszutek Wilk" <konrad.wilk@xxxxxxxxxx>
Date: Saturday, September 12, 2009, 7:54 PM

Hi

Are you able to get it working as dom0-patched?

--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering)
Alma Maters:
(1) Singapore Polytechnic
(2) National University of Singapore
Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
Email: space.time.universe@xxxxxxxxx
MSN: teoenming@xxxxxxxxxxx
Mobile Phone: +65-9648-9798
Street: Bedok Reservoir Road
Republic of Singapore

On Fri, Sep 11, 2009 at 8:56 PM, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on
top of Ubuntu 9.04 Server.

Boris.

--- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote:

From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server+ Serial Log
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Date: Friday, September 11, 2009, 7:59 AM

On Wed, Sep 09, 2009 at 10:35:34PM -0700, Boris Derzhavets wrote:
> Thanks Pasi.
> Serial log is attached.

OK. What about the boot _without_ Xen?
> Boris
>
> --- On Wed, 9/9/09, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote:
>
> From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server
> To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
> Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>
> Date: Wednesday, September 9, 2009, 4:21 PM
>
> On Wed, Sep 09, 2009 at 12:43:51PM -0700, Boris Derzhavets wrote:
> > Problem with serial console output.
> >
> > Grub Entry on testing box:-
> >
> > title Xen 3.5 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8)
> >      kernel /xen-3.5.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1
> >      module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0  earlyprintk=xen
> >      module /initrd-2.6.31-rc8.img
> >
> > On connected box in text mode:-
> >
> > # cat /dev/ttyS0 | tee log
> >
> > I am getting unreadable output
>
> That might be due to baudrate not being set right. Can you use minicom instead (and obviously
> set the right baudrate).
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
>
>       


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel






-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
<Prev in Thread] Current Thread [Next in Thread>