On Fri, Sep 11, 2009 at 11:03:38AM -0700, Boris Derzhavets wrote:
> Pasi,
>
> I've tried :-
>
> title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8)
> kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600
> initrd /initrd-2.6.31-rc8.img
>
> and
>
> title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8)
> kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8
> initrd /initrd-2.6.31-rc8.img
>
> Both options send output to real console and hangs at the point
as under
> Xen.
>
Please post "dmesg | grep ttyS" output from baremetal kernel (non-xen).
Is the serial port onboard (integrated into the motherboard)?
or pci addon card?
-- Pasi
> Boris.
> P.S Null modem connection is OK . I verified for Xen Serial Grub Entry.
>
>
> --- On Fri, 9/11/09, Pasi Kärkkäinen <
pasik@xxxxxx> wrote:
>
> From: Pasi Kärkkäinen <
pasik@xxxxxx>
> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla)
> To: "Boris Derzhavets" <
bderzhavets@xxxxxxxxx>
> Cc: "
xen-devel@xxxxxxxxxxxxxxxxxxx" <
xen-devel@xxxxxxxxxxxxxxxxxxx>, "Konrad Rzeszutek Wilk" <
konrad.wilk@xxxxxxxxxx>
> Date: Friday, September 11, 2009, 11:55 AM
>
> On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote:
> > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel.
> >
> > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8)
> > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0
> > initrd /initrd-2.6.31-rc8.img
> >
> > doesn't work.
> >
> > Googling provides outdated information. (RH 7.2, Suse 10.2)
> > It just crashes grub.
> >
>
> serial console setup for normal Linux kernel (non-xen):
>
> vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8
>
> That should work if it's a normal onboard serial port.
>
> If that doesn't work then try with "console=ttyS0,9600",
> which enables flow control.
>
> Read more here:
>
http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html>
> -- Pasi
>
> > Boris.
> >
> >
> >
> > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <
konrad.wilk@xxxxxxxxxx> wrote:
> >
> > From: Konrad Rzeszutek Wilk <
konrad.wilk@xxxxxxxxxx>
> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla)
> > To: "Boris Derzhavets" <
bderzhavets@xxxxxxxxx>
> > Cc: "
xen-devel@xxxxxxxxxxxxxxxxxxx" <
xen-devel@xxxxxxxxxxxxxxxxxxx>
> > Date: Friday, September 11, 2009, 9:38 AM
> >
> > On Fri, Sep 11, 2009 at
05:56:56AM -0700, Boris Derzhavets wrote:
> > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on
> > > top of Ubuntu 9.04 Server.
> >
> > Boris,
> >
> > Let me specific. Please boot up without Xen, the kernel
> > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use
> > the serial console.
> >
> > Using the vanilla kernel does not help me. I need to understand what is
> > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing
> > it to a 2.6.31 is not helping.
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> >
Xen-devel@xxxxxxxxxxxxxxxxxxx> >
http://lists.xensource.com/xen-devel> >
> >
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> >
Xen-devel@xxxxxxxxxxxxxxxxxxx> >
http://lists.xensource.com/xen-devel>
>
> _______________________________________________
> Xen-devel mailing list
>
Xen-devel@xxxxxxxxxxxxxxxxxxx>
http://lists.xensource.com/xen-devel>
>
>
>
Home