WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 		  
Home Products Support Community News
 
   
 

xen-devel

[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Xen-devel] No VT-d with Xen 3.3/3.4rc3 on Intel-Board DQ45CB

from [Tim Kaufmann] [Permanent Link][Original]
To: Ross Philipson <Ross.Philipson@xxxxxxxxxx>
Subject: Re: [Xen-devel] No VT-d with Xen 3.3/3.4rc3 on Intel-Board DQ45CB
From: Tim Kaufmann <tk@xxxxxxxxxx>
Date: Thu, 30 Apr 2009 01:47:47 +0200
Cc: xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxx>
Delivery-date: Wed, 29 Apr 2009 16:48:24 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <831D55AF5A11D64C9B4B43F59EEBF72035FCB5422C@xxxxxxxxxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <28109258-1B1E-48F9-936B-9AFC04866C11@xxxxxxxxxx> <831D55AF5A11D64C9B4B43F59EEBF72035FCB540D2@xxxxxxxxxxxxxxxxxxxxxxxxx> <F126C20F-9063-4FCC-BF8F-FE4CCDBCF1E5@xxxxxxxxxx> <831D55AF5A11D64C9B4B43F59EEBF72035FCB540E5@xxxxxxxxxxxxxxxxxxxxxxxxx> <21F81074-ADE6-4913-A77E-4615F84E5CB9@xxxxxxxxxx> <831D55AF5A11D64C9B4B43F59EEBF72035FCB540F1@xxxxxxxxxxxxxxxxxxxxxxxxx> <4343D05F-0C26-4319-BA8A-0EC9C65DA77A@xxxxxxxxxx> <831D55AF5A11D64C9B4B43F59EEBF72035FCB5412D@xxxxxxxxxxxxxxxxxxxxxxxxx> <4844FE6B-C07D-4D02-A342-65A70D4B36EA@xxxxxxxxxx> <831D55AF5A11D64C9B4B43F59EEBF72035FCB54140@xxxxxxxxxxxxxxxxxxxxxxxxx> <20090427190142.GE24960@xxxxxxxxxxxxxxx> <831D55AF5A11D64C9B4B43F59EEBF72035FCB54152@xxxxxxxxxxxxxxxxxxxxxxxxx> <1AF7E29D-3632-49FE-B745-9B6A57305C44@xxxxxxxxxx> <831D55AF5A11D64C9B4B43F59EEBF72035FCB5422C@xxxxxxxxxxxxxxxxxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx 

Am 28.04.2009 um 19:56 schrieb Ross Philipson:
Attached is a textual version of your DMAR and some notes. In notes.txt at the bottom I noted that both RMRRs seem to have some issues but the iommu_inclusive_mapping=1 should have handled them. 

I tried again with no success, logfile attached.
You said the BIOS you have is the latest - did you check with Intel to see if there are any known issues?
No, I wouldn't know where to ask. The support pages for the motherboard show nothing. I tried to downgrade to an earlier BIOS which was said to be ok here: 

http://lists.xensource.com/archives/html/xen-users/2008-10/msg00618.html

Unfortunately the flash tool didn't flash the older BIOS.

Tim

 __  __            _____ _  _    ___              _____
\ \/ /___ _ __ |___ /| || | / _ \ _ __ ___|___ / _ __ _ __ ___ \ // _ \ '_ \ |_ \| || |_| | | |__| '__/ __| |_ \ __| '_ \| '__/ _ \ / \ __/ | | | ___) |__ _| |_| |__| | | (__ ___) |__| |_) | | | __/ /_/\_\___|_| |_| |____(_) |_|(_)___/ |_| \___|____/ | .__/|_| \___| 
                                                          |_|
(XEN) Xen version 3.4.0-rc3-pre (root@xxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Sun Apr 26 16:00:39 CEST 2009 (XEN) Latest ChangeSet: Fri Apr 24 13:46:17 2009 +0100 19575:dc5bd14a4675 (XEN) Command line: console=com1 com1=115200,8n1,0xe1c0,0 iommu=1 iommu_inclusive_mapping=1 
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 0 MBR signatures
(XEN)  Found 5 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009e800 (usable)
(XEN)  000000000009e800 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000bd6c1000 (usable)
(XEN)  00000000bd6c1000 - 00000000bd703000 (ACPI NVS)
(XEN)  00000000bd703000 - 00000000bd826000 (reserved)
(XEN)  00000000bd826000 - 00000000bd83a000 (ACPI NVS)
(XEN)  00000000bd83a000 - 00000000bd93c000 (reserved)
(XEN)  00000000bd93c000 - 00000000bd93d000 (ACPI NVS)
(XEN)  00000000bd93d000 - 00000000bd942000 (reserved)
(XEN)  00000000bd942000 - 00000000bd94c000 (ACPI data)
(XEN)  00000000bd94c000 - 00000000bd967000 (ACPI NVS)
(XEN)  00000000bd967000 - 00000000bd986000 (reserved)
(XEN)  00000000bd986000 - 00000000bd98c000 (ACPI NVS)
(XEN)  00000000bd98c000 - 00000000bdb00000 (usable)
(XEN)  00000000bdc00000 - 00000000c0000000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 000000023c000000 (usable)
(XEN) System RAM: 8087MB (8281932kB)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2  INTEL)
(XEN) ACPI: XSDT BD94AE18, 005C (r1 INTEL DQ45CB 4F MSFT 10013) (XEN) ACPI: FACP BD949D98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013) (XEN) ACPI: DSDT BD942018, 6818 (r1 INTEL DQ45CB 4F INTL 20051117) 
(XEN) ACPI: FACS BD952F40, 0040
(XEN) ACPI: APIC BD949F18, 006C (r2 INTEL DQ45CB 4F MSFT 10013) (XEN) ACPI: MCFG BD954E18, 003C (r1 INTEL DQ45CB 4F MSFT 97) (XEN) ACPI: ASF! BD953D18, 00A0 (r32 INTEL DQ45CB 4F TFSM F4240) (XEN) ACPI: SPCR BD954D18, 0050 (r1 INTEL DQ45CB 4F AMI. 3) (XEN) ACPI: TCPA BD954C98, 0032 (r2 INTEL DQ45CB 4F MSFT 1000013) (XEN) ACPI: DMAR BD93CC18, 0120 (r1 INTEL DQ45CB 4F INTL 1) 
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000023c000000
(XEN) Domain heap initialised
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI:                  wakeup_vec[bd952f4c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) [VT-D]dmar.c:485: Host address width 36
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1b.0
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed91000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.1
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.3
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:358: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.1
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.7
(XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:401: RMRR address range not in reserved memory base = bdc00000 end = ffffffffbfffffff; iommu_inclusive_mapping=1 parameter may be needed. 
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.1
(XEN) Intel VT-d DMAR tables have been parsed.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2833.069 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU2 has no CMCI support
(XEN) CPU2: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
(XEN) Booting processor 3/3 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU3 has no CMCI support
(XEN) CPU3: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 3.579MHz ACPI PM Timer



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Xen-devel] [PATCH] 1/1 Better expose xenstore limits, Keir Fraser
Next by Date:  Re: [Xen-devel] No VT-d with Xen 3.3/3.4rc3 on Intel-Board DQ45CB, Tim Kaufmann
Previous by Thread:  RE: [Xen-devel] No VT-d with Xen 3.3/3.4rc3 on Intel-Board DQ45CB, Ross Philipson
Next by Thread:  Re: [Xen-devel] No VT-d with Xen 3.3/3.4rc3 on Intel-Board DQ45CB, Tim Kaufmann
Indexes:  [Date] [Thread] [Top] [All Lists]
 
   

Copyright , Citrix Systems Inc. All rights reserved. Legal and Privacy