This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Home Products Support Community News


Re: [Xen-devel] No VT-d with Xen 3.3/3.4rc3 on Intel-Board DQ45CB

I sent the requested files to Ross, now we're working on getting the Serial-over-LAN (SOL) to work so I can capture the boot messages.

The board has two COM ports. One does not have a standard connector. It's only a couple of pins directly on the board, so we can't use this without getting a connector for it. I turned that one off in the BIOS. lspci still shows the "serial KT controller", so this must be the COM- Port created by AMT/SOL. The board's manual states, that the SOL-Port is Com4 by the way.

As the data is sent via Ethernet, the USB-to-Serial-Converter and the Nullmodem-Cable probably won't be useful. I downloaded the AMT-SDK from intel.com and successfully connected to the AMT-Stack on the Xen- PC. I can start a SOL-Console - now what? :-)


Xen-devel mailing list