"Andrew Lyon" <andrew.lyon@xxxxxxxxx> writes:
> I configured serial console on my system today by adding
> com1=115200,8n1 console=vga,com1 to my kernel line in grub:
>
> title Xen 3.2.1 / Linux 2.6.21-xen
> root (hd0,0)
> kernel /xen.gz vtd=1 com1=115200,8n1 console=vga,com1
> module /vmlinuz-2.6.21-xen root=/dev/sda2
>
> The xen bootup messages are logged to the serial and vga consoles, and
> initially the kernel messages are also displayed, but it stops after
> "Freeing unused kernel memory: 208k freed"
it appears the problem is that you have told Xen to use the serial console, but
you have not told Linux to use the serial console... this is consistent with
Xen outputting to the serial console, then a quiet serial console while
linux boots, then a working getty.
here is what my grub config looks like on my headless CentOS/Xen boxes:
serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
terminal serial console
title CentOS (2.6.18-53.1.21.el5xen)
root (hd0,0)
kernel /boot/xen.gz-2.6.18-53.1.21.el5 dom0_mem=512M com1=115200,8n1
module /boot/vmlinuz-2.6.18-53.1.21.el5xen selinux=0 ro root=/dev/md0
console=ttyS0,115200n8
module /boot/initrd-2.6.18-53.1.21.el5xen.img
the part you are missing is the console=ttyS0,115200n8 on the module line
for the Linux kernel. add that and I bet it will work.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home