| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] Release 0.9.5 of GPL PV Drivers for Windows
James;
That's brilliant news, thanks for sorting that. I wonder if this might
help with the tap:qcow issue too. I'll test both items as soon as you
release. Good work - you are fast!
G
-----Original Message-----
From: James Harper [mailto:james.harper@xxxxxxxxxxxxxxxx]
Sent: 07 June 2008 12:42 PM
To: Geoff Wiener; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Release 0.9.5 of GPL PV Drivers for Windows
> Hi James;
>
> I've been following this thread. On the "format" issue I noticed in
> Device Manager that the Disk Properties, Location, on the General tab
> reads Bus Number 0, Target ID 0, Lun0 for both disks. From my
> experience with iSCSI the Location information in device manage is
> obtained from the initiator and is accurate. Does your driver reflect
> this information correctly? If so having two LUN0's on the same
Target
> ID would certainly confuse Windows.
They are on separate 'controllers', so there is no resulting confusing.
I have actually just fixed the formatting issue. It was related to
windows giving us buffers that were not aligned to a 512 byte boundary,
which the vbd backend driver won't accept. My workaround involves a huge
hit in performance and also had a nasty bug in it and that was causing
the format issue.
Not yet checked into hg so you'll have to wait a bit. If I don't get the
other bug resolved to be able to do a binary release, I'll at least
check in the format fix to hg.
James
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home