I'm not sure why you'd get that, I certainly don't have it in my boot
log. Once you get up to a newer version, please send the whole boot log
if it still doesn't work. Thanks,
Okay got some more information this is kinda odd...
If you look it does see the two cpu's but later theres a line about
Dom0 max_vcpus=1.
How did this get set? is this default? could I set this on the commandline to 2?
Thanks,
- David Brown
(XEN) Xen command line: BOOT_IMAGE=scsi0:\EFI\lnxhpc\xen.gz dom0_mem=1152M
(XEN) xen image pstart: 0x4000000, xenheap pend: 0x8000000
(XEN) Xen patching physical address access by offset: 0x0
(XEN) find_memory: efi_memmap_walk returns max_page=103fff0
(XEN) Before xen_heap_start: f0000000041a0400
(XEN) After xen_heap_start: f0000000043b0000
(XEN) warning: skipping physical page 0
(XEN) Init boot pages: 0x4000 -> 0x4000000.
(XEN) Init boot pages: 0x8000000 -> 0x3f5e4000.
(XEN) Init boot pages: 0x3fb00000 -> 0x3fb2c000.
(XEN) Init boot pages: 0x100000000 -> 0x10e580000.
(XEN) Init boot pages: 0x10e588000 -> 0x10e58c000.
(XEN) Init boot pages: 0x10e590000 -> 0x10e780000.
(XEN) Init boot pages: 0x10e788000 -> 0x10e78c000.
(XEN) Init boot pages: 0x10e790000 -> 0x27fffc000.
(XEN) Init boot pages: 0x4040000000 -> 0x40fe35a000.
(XEN) Init boot pages: 0x40feaf0f88 -> 0x40fedd8008.
(XEN) Init boot pages: 0x40fedd8068 -> 0x40feddbfc0.
(XEN) Init boot pages: 0x40feddbff5 -> 0x40fedde000.
(XEN) Init boot pages: 0x40fef93860 -> 0x40fef9c008.
(XEN) Init boot pages: 0x40fef9c908 -> 0x40ffd68000.
(XEN) Init boot pages: 0x40ffda8000 -> 0x40ffe10000.
(XEN) Init boot pages: 0x40ffe80000 -> 0x40fffc0000.
(XEN) System RAM: 10229MB (10474512kB)
(XEN) size of virtual frame_table: 25648kB
(XEN) virtual machine to physical table: f3fffffff7e00080 size: 5200kB
(XEN) max_page: 0x103fff0
(XEN) Domain heap initialised: DMA width 30 bits
(XEN) Xen heap: 60MB (61760kB)
(XEN) ACPI: RSDP (v002 HP ) @
0x000000003fb2e000
(XEN) ACPI: XSDT (v001 HP rx2600 0x00000000 HP 0x00000000) @
0x000000003fb2e02c
(XEN) ACPI: FADT (v003 HP rx2600 0x00000000 HP 0x00000000) @
0x000000003fb36800
(XEN) ACPI: SPCR (v001 HP rx2600 0x00000000 HP 0x00000000) @
0x000000003fb36938
(XEN) ACPI: DBGP (v001 HP rx2600 0x00000000 HP 0x00000000) @
0x000000003fb36988
(XEN) ACPI: MADT (v001 HP rx2600 0x00000000 HP 0x00000000) @
0x000000003fb36a48
(XEN) ACPI: SPMI (v004 HP rx2600 0x00000000 HP 0x00000000) @
0x000000003fb369c0
(XEN) ACPI: CPEP (v001 HP rx2600 0x00000000 HP 0x00000000) @
0x000000003fb36a10
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb33870
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb33a50
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb33da0
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb347c0
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb351e0
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb35c00
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb36620
(XEN) ACPI: SSDT (v001 HP rx2600 0x00000006 INTL 0x02012044) @
0x000000003fb36710
(XEN) ACPI: DSDT (v001 HP rx2600 0x00000007 INTL 0x02012044) @
0x0000000000000000
(XEN) SAL 3.1: HP version 2.31
(XEN) SAL Platform features: None
(XEN) SAL: AP wakeup using external interrupt vector 0xff
(XEN) No logical to physical processor mapping available
(XEN) avail:0x1180c60000000000,
status:0x60000000000,control:0x1180c00000000000, vm?0x0
(XEN) No VT feature supported.
(XEN) cpu_init: current=f00000000410c000
(XEN) vhpt_init: vhpt paddr=0x10e590000, end=0x10e59ffff
(XEN) ACPI: Local APIC address e8000000fee00000
(XEN) ACPI: LAPIC_ADDR_OVR (address[00000000fee00000])
(XEN) ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled)
(XEN) CPU 0 (0x0000) enabled (BSP)
(XEN) ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x01] lsapic_eid[0x00] enabled)
(XEN) CPU 1 (0x0100) enabled
(XEN) ACPI: IOSAPIC (id[0x0] address[00000000fed20800] gsi_base[16])
(XEN) ACPI: IOSAPIC (id[0x1] address[00000000fed22800] gsi_base[27])
(XEN) ACPI: IOSAPIC (id[0x2] address[00000000fed24800] gsi_base[38])
(XEN) ACPI: IOSAPIC (id[0x3] address[00000000fed26800] gsi_base[49])
(XEN) ACPI: IOSAPIC (id[0x4] address[00000000fed28800] gsi_base[60])
(XEN) ACPI: IOSAPIC (id[0x6] address[00000000fed2c800] gsi_base[71])
(XEN) 2 CPUs available, 2 CPUs total
(XEN) MCA related initialization done
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) CPU 0: base freq=200.000MHz, ITC ratio=15/2, ITC freq=1500.000MHz+/-750ppm
(XEN) Time init:
(XEN) .... System Time: 18750170ns
(XEN) .... scale: AAAAAAAA
(XEN) Boot processor id 0x0/0x0
(XEN) num_online_cpus=1, max_cpus=64
(XEN) cpu_init: current=f000000007ba8000
(XEN) vhpt_init: vhpt paddr=0x10e790000, end=0x10e79ffff
(XEN) CPU 1: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr
614 cycles)
(XEN) CPU 1: base freq=200.000MHz, ITC ratio=15/2, ITC freq=1500.000MHz+/-750ppm
(XEN) Brought up 2 CPUs
(XEN) Total of 2 processors activated (0.52 BogoMIPS).
(XEN) perfmon: added sampling format xenoprof_format
(XEN) xenoprof: using perfmon.
(XEN) perfmon: version 2.0 IRQ 238
(XEN) perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
(XEN) Maximum number of domains: 63; 18 RID bits per domain
(XEN) GSI 34 (edge, high) -> CPU 0 (0x0000) vector 48
(XEN) domain.c:500: arch_domain_create:500 domain 0 pervcpu_vhpt 1
(XEN) tlb_track_allocate_entries:69 allocated 256 num_entries 256 num_free 256
(XEN) tlb_track_create:115 hash 0xf00000010e588000 hash_size 512
(XEN) ### domain f000000007b94080: rid=40000-80000 mp_rid=1000
(XEN) arch_domain_create: domain=f000000007b94080
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x4000000 -> 0x4a7a741
(XEN) METAPHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 4000000->4a7a741
(XEN) Entry address: 400ff20
(XEN) Init. ramdisk: 4a80000 len 1b5860
(XEN) Start info.: 4a7c000->4a80000
(XEN) Dom0 max_vcpus=1
(XEN) Dom0: 0xf000000007b94080
(XEN) enable lsapic entry: 0xf00000003fb36a80
(XEN) DISABLE lsapic entry: 0xf00000003fb36a8c
(XEN) Domain0 EFI passthrough: ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000
(XEN) dom mem: type=13, attr=0x8000000000000008,
range=[0x0000000000000000-0x0000000000001000) (4KB)
(XEN) dom mem: type=10, attr=0x8000000000000008,
range=[0x0000000000001000-0x0000000000002000) (4KB)
(XEN) dom mem: type= 6, attr=0x8000000000000008,
range=[0x0000000000002000-0x0000000000003000) (4KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000000000003000-0x0000000004000000) (63MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000000004000000-0x00000000081a1000) (65MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x00000000081a1000-0x000000003f5ca000) (884MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000003f5ca000-0x000000003f5e4000) (104KB)
(XEN) dom mem: type= 5, attr=0x8000000000000008,
range=[0x000000003f5e4000-0x000000003fac0000) (4MB)
(XEN) dom mem: type= 8, attr=0x0000000000000008,
range=[0x000000003fac0000-0x000000003fb00000) (256KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000003fb00000-0x000000003fb2c000) (176KB)
(XEN) dom mem: type= 9, attr=0x0000000000000008,
range=[0x000000003fb2c000-0x000000003fb38000) (48KB)
(XEN) dom mem: type= 6, attr=0x8000000000000008,
range=[0x000000003fb38000-0x0000000040000000) (4MB)
(XEN) dom mem: type=11, attr=0x0000000000000001,
range=[0x0000000080000000-0x00000000fe000000) (2016MB)
(XEN) dom mem: type=11, attr=0x8000000000000001,
range=[0x00000000fed00000-0x0000000100000000) (19MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000000100000000-0x0000000107dbf000) (125MB)
(XEN) dom mem: type= 8, attr=0x0000000000000008,
range=[0x000000010e580000-0x000000010e582000) (8KB)
(XEN) dom mem: type= 8, attr=0x0000000000000008,
range=[0x000000010e587000-0x000000010e588000) (4KB)
(XEN) dom mem: type= 8, attr=0x0000000000000008,
range=[0x000000010e58c000-0x000000010e58f000) (12KB)
(XEN) dom mem: type= 8, attr=0x0000000000000008,
range=[0x000000010e781000-0x000000010e782000) (4KB)
(XEN) dom mem: type= 8, attr=0x0000000000000008,
range=[0x000000010e786000-0x000000010e787000) (4KB)
(XEN) dom mem: type= 8, attr=0x0000000000000008,
range=[0x000000010e78e000-0x000000010e78f000) (4KB)
(XEN) dom mem: type= 6, attr=0x8000000000000008,
range=[0x000000027fffe000-0x0000000280000000) (8KB)
(XEN) dom mem: type= 5, attr=0x8000000000000008,
range=[0x00000040ffd6a000-0x00000040ffda6000) (240KB)
(XEN) dom mem: type= 5, attr=0x8000000000000008,
range=[0x00000040ffe12000-0x00000040ffe80000) (440KB)
(XEN) dom mem: type= 6, attr=0x8000000000000008,
range=[0x00000040fffc0000-0x0000004100000000) (256KB)
(XEN) dom mem: type=11, attr=0x0000000000000001,
range=[0x0000080000000000-0x0000100000000000) (8388608MB)
(XEN) dom mem: type=12, attr=0x8000000000000001,
range=[0x0003fffffc000000-0x0004000000000000) (64MB)
(XEN) Scrubbing Free RAM:
..........................................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
(XEN) vcpu_get_lrr0: Unmasked interrupts unsupported
(XEN) vcpu_get_lrr1: Unmasked interrupts unsupported
(XEN) Domain set shared_info_va to 0xfffffffffff00000
(XEN) [ 0.000000] Linux version 2.6.18-xen0
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home