From: Anthony PERARD <anthony.perard@xxxxxxxxxx>
By default, Xen will handle the old ACPI IO port. But it can switch to
the new one by setting the HVM_PARAM_ACPI_NEW_IOPORT to 1.
Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
---
xen/arch/x86/hvm/hvm.c | 9 +++++++++
xen/arch/x86/hvm/pmtimer.c | 26 ++++++++++++++++++++++++--
xen/include/asm-x86/hvm/vpt.h | 1 +
xen/include/public/hvm/params.h | 5 ++++-
4 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/xen/arch/x86/hvm/hvm.c b/xen/arch/x86/hvm/hvm.c
index 94190d3..ea296e5 100644
--- a/xen/arch/x86/hvm/hvm.c
+++ b/xen/arch/x86/hvm/hvm.c
@@ -2991,6 +2991,15 @@ long do_hvm_op(unsigned long op, XEN_GUEST_HANDLE(void)
arg)
rc = -EINVAL;
break;
+ case HVM_PARAM_ACPI_NEW_IOPORT:
+ if (a.value == 1)
+ pmtimer_change_ioport(d, 1);
+ else if (a.value == 0)
+ pmtimer_change_ioport(d, 0);
+ else
+ rc = -EINVAL;
+
+ break;
}
if ( rc == 0 )
diff --git a/xen/arch/x86/hvm/pmtimer.c b/xen/arch/x86/hvm/pmtimer.c
index 1b9ab7b..f046201 100644
--- a/xen/arch/x86/hvm/pmtimer.c
+++ b/xen/arch/x86/hvm/pmtimer.c
@@ -24,6 +24,9 @@
#include <asm/acpi.h> /* for hvm_acpi_power_button prototype */
/* Slightly more readable port I/O addresses for the registers we intercept */
+#define PM1a_STS_ADDR_OLD (ACPI_PM1A_EVT_BLK_ADDRESS_OLD)
+#define PM1a_EN_ADDR_OLD (ACPI_PM1A_EVT_BLK_ADDRESS_OLD + 2)
+#define TMR_VAL_ADDR_OLD (ACPI_PM_TMR_BLK_ADDRESS_OLD)
#define PM1a_STS_ADDR (ACPI_PM1A_EVT_BLK_ADDRESS)
#define PM1a_EN_ADDR (ACPI_PM1A_EVT_BLK_ADDRESS + 2)
#define TMR_VAL_ADDR (ACPI_PM_TMR_BLK_ADDRESS)
@@ -155,16 +158,20 @@ static int handle_evt_io(
switch ( addr )
{
/* PM1a_STS register bits are write-to-clear */
+ case PM1a_STS_ADDR_OLD:
case PM1a_STS_ADDR:
s->pm.pm1a_sts &= ~byte;
break;
+ case PM1a_STS_ADDR_OLD + 1:
case PM1a_STS_ADDR + 1:
s->pm.pm1a_sts &= ~(byte << 8);
break;
+ case PM1a_EN_ADDR_OLD:
case PM1a_EN_ADDR:
s->pm.pm1a_en = (s->pm.pm1a_en & 0xff00) | byte;
break;
+ case PM1a_EN_ADDR_OLD + 1:
case PM1a_EN_ADDR + 1:
s->pm.pm1a_en = (s->pm.pm1a_en & 0xff) | (byte << 8);
break;
@@ -272,6 +279,21 @@ static int pmtimer_load(struct domain *d,
hvm_domain_context_t *h)
HVM_REGISTER_SAVE_RESTORE(PMTIMER, pmtimer_save, pmtimer_load,
1, HVMSR_PER_DOM);
+void pmtimer_change_ioport(struct domain *d, int use_new)
+{
+ if (use_new) {
+ register_portio_handler(d, TMR_VAL_ADDR, 4, handle_pmt_io);
+ register_portio_handler(d, PM1a_STS_ADDR, 4, handle_evt_io);
+ unregister_portio_handler(d, TMR_VAL_ADDR_OLD, 4);
+ unregister_portio_handler(d, PM1a_STS_ADDR_OLD, 4);
+ } else {
+ register_portio_handler(d, TMR_VAL_ADDR_OLD, 4, handle_pmt_io);
+ register_portio_handler(d, PM1a_STS_ADDR_OLD, 4, handle_evt_io);
+ unregister_portio_handler(d, TMR_VAL_ADDR, 4);
+ unregister_portio_handler(d, PM1a_STS_ADDR, 4);
+ }
+}
+
void pmtimer_init(struct vcpu *v)
{
PMTState *s = &v->domain->arch.hvm_domain.pl_time.vpmt;
@@ -284,8 +306,8 @@ void pmtimer_init(struct vcpu *v)
/* Intercept port I/O (need two handlers because PM1a_CNT is between
* PM1a_EN and TMR_VAL and is handled by qemu) */
- register_portio_handler(v->domain, TMR_VAL_ADDR, 4, handle_pmt_io);
- register_portio_handler(v->domain, PM1a_STS_ADDR, 4, handle_evt_io);
+ register_portio_handler(v->domain, TMR_VAL_ADDR_OLD, 4, handle_pmt_io);
+ register_portio_handler(v->domain, PM1a_STS_ADDR_OLD, 4, handle_evt_io);
/* Set up callback to fire SCIs when the MSB of TMR_VAL changes */
init_timer(&s->timer, pmt_timer_callback, s, v->processor);
diff --git a/xen/include/asm-x86/hvm/vpt.h b/xen/include/asm-x86/hvm/vpt.h
index 65b0dff..6b68888 100644
--- a/xen/include/asm-x86/hvm/vpt.h
+++ b/xen/include/asm-x86/hvm/vpt.h
@@ -179,6 +179,7 @@ void rtc_update_clock(struct domain *d);
void pmtimer_init(struct vcpu *v);
void pmtimer_deinit(struct domain *d);
void pmtimer_reset(struct domain *d);
+void pmtimer_change_ioport(struct domain *d, int use_new);
void hpet_init(struct vcpu *v);
void hpet_deinit(struct domain *d);
diff --git a/xen/include/public/hvm/params.h b/xen/include/public/hvm/params.h
index 673148b..40af8d8 100644
--- a/xen/include/public/hvm/params.h
+++ b/xen/include/public/hvm/params.h
@@ -113,6 +113,9 @@
#define HVM_PARAM_CONSOLE_PFN 17
#define HVM_PARAM_CONSOLE_EVTCHN 18
-#define HVM_NR_PARAMS 19
+/* to specify which firmware acpi ioport is used */
+#define HVM_PARAM_ACPI_NEW_IOPORT 19
+
+#define HVM_NR_PARAMS 20
#endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */
--
1.7.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home