Hi, Konrad:
I removed my graphic card and use the VGA on motherboard instead, this
time Xen cannot boot at all. It shows the following info:
\ \/ /___ _ __ | || | / _ \ / | _ __ ___| ___| _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | || |__| '__/ __|___ \ __| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| || |__| | | (__ ___) |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)_| |_| \___|____/ | .__/|_| \___|
|_|
(XEN) Xen version 4.0.1-rc5-pre (xisisu@) (gcc version 4.4.3 (Ubuntu
4.4.3-4ubuntu5) ) Mon Jul 26 15:11:14 CDT 2010
(XEN) Latest ChangeSet: Wed Jul 21 13:55:00 2010 +0100 21286:8ee744f57567
(XEN) Console output is synchronous.
(XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all
sync_console console_to_ring com1=115200,8n1 console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007f686c00 (usable)
(XEN) 000000007f686c00 - 000000007f688c00 (ACPI NVS)
(XEN) 000000007f688c00 - 000000007f68ac00 (ACPI data)
(XEN) 000000007f68ac00 - 0000000080000000 (reserved)
(XEN) 00000000f0000000 - 00000000f4000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2038MB (2087064kB)
(XEN) ACPI: RSDP 000FEB00, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FD24F, 005C (r1 DELL GX620 7 ASL 61)
(XEN) ACPI: FACP 000FD347, 00F4 (r3 DELL GX620 7 ASL 61)
(XEN) ACPI: DSDT FFFD32F4, 3D69 (r1 DELL dt_ex 1000 INTL 20050309)
(XEN) ACPI: FACS 7F686C00, 0040
(XEN) ACPI: SSDT FFFD717C, 00AA (r1 DELL st_ex 1000 INTL 20050309)
(XEN) ACPI: APIC 000FD43B, 0072 (r1 DELL GX620 7 ASL 61)
(XEN) ACPI: BOOT 000FD4AD, 0028 (r1 DELL GX620 7 ASL 61)
(XEN) ACPI: ASF! 000FD4D5, 0067 (r16 DELL GX620 7 ASL 61)
(XEN) ACPI: MCFG 000FD53C, 003E (r1 DELL GX620 7 ASL 61)
(XEN) ACPI: HPET 000FD57A, 0038 (r1 DELL GX620 7 ASL 61)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000007f686000
(XEN) Xen heap: 8MB (8852kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[7f686c0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3391.803 MHz processor.
(XEN) CPU0: VMX disabled by BIOS.
(XEN) VMX: failed to initialise.
(XEN) CPU0: Intel Extended MCE MSRs (24) available
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) CPU1: Intel Extended MCE MSRs (24) available
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
ˇ(XEN) Allocated console ring of 16 KiB.
(XEN) Brought up 2 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x400000 -> 0xad2000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000020000000->0000000030000000 (196608 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0400000->c0ad2000
(XEN) Init. ramdisk: c0ad2000->c8919800
(XEN) Phys-Mach map: c891a000->c8a1a000
(XEN) Start info: c8a1a000->c8a1a47c
(XEN) Page tables: c8a1b000->c8a66000
(XEN) Boot stack: c8a66000->c8a67000
(XEN) TOTAL: c0000000->c8c00000
(XEN) ENTRY ADDRESS: c0893000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: ..........done.
(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128,
offset_in_bytes 258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 156kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
Reserving virtual address space above 0xf5800000
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.16 (xisisu@xisisu-desktop) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Wed Jul 28 13:20:09 CDT 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
released 0 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000000a0000 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000040000000 (usable)
Xen: 000000007f686c00 - 000000007f688c00 (ACPI NVS)
Xen: 000000007f688c00 - 000000007f68ac00 (ACPI data)
Xen: 000000007f68ac00 - 0000000080000000 (reserved)
Xen: 00000000f0000000 - 00000000f4000000 (reserved)
Xen: 00000000fec00000 - 00000000fed00400 (reserved)
Xen: 00000000fed20000 - 00000000feda0000 (reserved)
Xen: 00000000fee00000 - 00000000fef00000 (reserved)
Xen: 00000000ffb00000 - 0000000100000000 (reserved)
bootconsole [xenboot0] enabled
DMI 2.3 present.
last_pfn = 0x40000 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000002d1fe000
NX (Execute Disable) protection: active
RAMDISK: 00ad2000 - 08919800
ACPI: RSDP 000feb00 00024 (v02 DELL )
ACPI: XSDT 000fd24f 0005C (v01 DELL GX620 00000007 ASL 00000061)
ACPI: FACP 000fd347 000F4 (v03 DELL GX620 00000007 ASL 00000061)
ACPI: DSDT fffd32f4 03D69 (v01 DELL dt_ex 00001000 INTL 20050309)
ACPI: FACS 7f686c00 00040
ACPI: SSDT fffd717c 000AA (v01 DELL st_ex 00001000 INTL 20050309)
ACPI: APIC 000fd43b 00072 (v01 DELL GX620 00000007 ASL 00000061)
ACPI: BOOT 000fd4ad 00028 (v01 DELL GX620 00000007 ASL 00000061)
ACPI: ASF! 000fd4d5 00067 (v16 DELL GX620 00000007 ASL 00000061)
ACPI: MCFG 000fd53c 0003E (v01 DELL GX620 00000007 ASL 00000061)
ACPI: HPET 000fd57a 00038 (v01 DELL GX620 00000007 ASL 00000061)
302MB HIGHMEM available.
721MB LOWMEM available.
mapped low ram: 0 - 2d1fe000
low ram: 0 - 2d1fe000
node 0 low ram: 00000000 - 2d1fe000
node 0 bootmap 00007000 - 0000ca40
(10 early reservations) ==> bootmem [0000000000 - 002d1fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0008a1b000 - 0008a66000] XEN PAGETABLES ==> [0008a1b000 - 0008a66000]
#2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#4 [0000400000 - 00009ac9b4] TEXT DATA BSS ==> [0000400000 - 00009ac9b4]
#5 [0000ad2000 - 0008919800] RAMDISK ==> [0000ad2000 - 0008919800]
#6 [000891a000 - 0008a1b000] XEN START INFO ==> [000891a000 - 0008a1b000]
#7 [00009ad000 - 00009ad1cc] BRK ==> [00009ad000 - 00009ad1cc]
#8 [0000100000 - 0000220000] PGTABLE ==> [0000100000 - 0000220000]
#9 [0000007000 - 000000d000] BOOTMAP ==> [0000007000 - 000000d000]
found SMP MP-table at [c00fe710] fe710
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0002d1fe
HighMem 0x0002d1fe -> 0x00040000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x00040000
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.1-rc5-pre (preserve-AD) (dom0)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 16 pages/cpu @c926f000 s42264 r0 d23272 u65536
pcpu-alloc: s42264 r0 d23272 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1
Xen: using vcpu_info placement
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259999
Kernel command line: ro root=UUID=7dfb63a5-8bd3-4036-8da3-344fe6964e5a
console=hvc0 earlyprintk=xen nomodeset
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
DMA: Placing 64MB software IO TLB between c9354000 - cd354000
DMA: software IO TLB at phys 0x9354000 - 0xd354000
xen_swiotlb_fixup: buf=c9354000 size=67108864
xen_swiotlb_fixup: buf=cd3b4000 size=32768
Initializing HighMem for node 0 (0002d1fe:00040000)
Memory: 835008k/1048576k available (3000k kernel code, 212728k
reserved, 1680k data, 472k init, 309256k highmem)
virtual kernel memory layout:
fixmap : 0xf567e000 - 0xf57ff000 (1540 kB)
pkmap : 0xf5200000 - 0xf5400000 (2048 kB)
vmalloc : 0xed9fe000 - 0xf51fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xed1fe000 ( 721 MB)
.init : 0xc0893000 - 0xc0909000 ( 472 kB)
.data : 0xc06ee050 - 0xc08920f8 (1680 kB)
.text : 0xc0400000 - 0xc06ee050 (3000 kB)
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:768
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen_allocate_pirq: returning irq 9 for gsi 9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
installing Xen timer for CPU 0
Detected 3391.802 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 6783.60 BogoMIPS (lpj=3391802)
Security Framework initialized
SELinux: Initializing.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
Performance Events: no PMU driver, software events only.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
cpu 0 spinlock event irq 766
installing Xen timer for CPU 1
cpu 1 spinlock event irq 760
SMP alternatives: switching to SMP code
Initializing CPU#1
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Brought up 2 CPUs
Grant table initialized
Time: 17:09:40 Date: 07/28/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ERROR: Unable to locate IOAPIC for GSI 9
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with 'pcie_aspm=force'
pci 0000:00:1e.0: transparent bridge
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.1
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.3
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1e.2
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.1
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 02:00.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
xen_balloon: Initialising balloon driver with page order 0.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
xen_allocate_pirq: returning irq 13 for gsi 13
xen_allocate_pirq: returning irq 8 for gsi 8
xen_allocate_pirq: returning irq 7 for gsi 7
xen_allocate_pirq: returning irq 4 for gsi 4
Already setup the GSI :4
xen_allocate_pirq: returning irq 3 for gsi 3
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:09: iomem range 0x0-0x9ffff could not be reserved
system 00:09: iomem range 0x100000-0xffffff could not be reserved
system 00:09: iomem range 0x1000000-0x7f686bff could not be reserved
system 00:09: iomem range 0xf0000-0xfffff could not be reserved
system 00:09: iomem range 0xc0000-0xcffff could not be reserved
system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed9ffff has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:09: iomem range 0xffc00000-0xffffffff has been reserved
system 00:0a: ioport range 0x100-0x1fe could not be reserved
system 00:0a: ioport range 0x200-0x277 has been reserved
system 00:0a: ioport range 0x280-0x2e7 has been reserved
system 00:0a: ioport range 0x2f0-0x2f7 has been reserved
system 00:0a: ioport range 0x300-0x377 could not be reserved
system 00:0a: ioport range 0x380-0x3bb has been reserved
system 00:0a: ioport range 0x3c0-0x3e7 could not be reserved
system 00:0a: ioport range 0x3f6-0x3f7 could not be reserved
system 00:0a: ioport range 0x400-0x4cf has been reserved
system 00:0a: ioport range 0x4d2-0x57f has been reserved
system 00:0a: ioport range 0x580-0x677 has been reserved
system 00:0a: ioport range 0x680-0x777 has been reserved
system 00:0a: ioport range 0x780-0x7bb has been reserved
system 00:0a: ioport range 0x7c0-0x7ff has been reserved
system 00:0a: ioport range 0x8e0-0x8ff has been reserved
system 00:0a: ioport range 0x900-0x9fe has been reserved
system 00:0a: ioport range 0xa00-0xafe has been reserved
system 00:0a: ioport range 0xb00-0xbfe has been reserved
system 00:0a: ioport range 0xc80-0xcaf has been reserved
system 00:0a: ioport range 0xcb0-0xcbf has been reserved
system 00:0a: ioport range 0xcc0-0xcf7 has been reserved
system 00:0a: ioport range 0xd00-0xdfe has been reserved
system 00:0a: ioport range 0xe00-0xefe has been reserved
system 00:0a: ioport range 0xf00-0xffe has been reserved
system 00:0a: ioport range 0x2000-0x20fe has been reserved
system 00:0a: ioport range 0x2100-0x21fe has been reserved
system 00:0a: ioport range 0x2200-0x22fe has been reserved
system 00:0a: ioport range 0x2300-0x23fe has been reserved
system 00:0a: ioport range 0x2400-0x24fe has been reserved
system 00:0a: ioport range 0x2500-0x25fe has been reserved
system 00:0a: ioport range 0x2600-0x26fe has been reserved
system 00:0a: ioport range 0x2700-0x27fe has been reserved
system 00:0a: ioport range 0x2800-0x28fe has been reserved
system 00:0a: ioport range 0x2900-0x29fe has been reserved
system 00:0a: ioport range 0x2a00-0x2afe has been reserved
system 00:0a: ioport range 0x2b00-0x2bfe has been reserved
system 00:0a: ioport range 0x2c00-0x2cfe has been reserved
system 00:0a: ioport range 0x2d00-0x2dfe has been reserved
system 00:0a: ioport range 0x2e00-0x2efe has been reserved
system 00:0a: ioport range 0x2f00-0x2ffe has been reserved
system 00:0a: ioport range 0x5000-0x50fe has been reserved
system 00:0a: ioport range 0x5100-0x51fe has been reserved
system 00:0a: ioport range 0x5200-0x52fe has been reserved
system 00:0a: ioport range 0x5300-0x53fe has been reserved
system 00:0a: ioport range 0x5400-0x54fe has been reserved
system 00:0a: ioport range 0x5500-0x55fe has been reserved
system 00:0a: ioport range 0x5600-0x56fe has been reserved
system 00:0a: ioport range 0x5700-0x57fe has been reserved
system 00:0a: ioport range 0x5800-0x58fe has been reserved
system 00:0a: ioport range 0x5900-0x59fe has been reserved
system 00:0a: ioport range 0x5a00-0x5afe has been reserved
system 00:0a: ioport range 0x5b00-0x5bfe has been reserved
system 00:0a: ioport range 0x5c00-0x5cfe has been reserved
system 00:0a: ioport range 0x5d00-0x5dfe has been reserved
system 00:0a: ioport range 0x5e00-0x5efe has been reserved
system 00:0a: ioport range 0x5f00-0x5ffe has been reserved
system 00:0a: ioport range 0x6000-0x60fe has been reserved
system 00:0a: ioport range 0x6100-0x61fe has been reserved
system 00:0a: ioport range 0x6200-0x62fe has been reserved
system 00:0a: ioport range 0x6300-0x63fe has been reserved
system 00:0a: ioport range 0x6400-0x64fe has been reserved
system 00:0a: ioport range 0x6500-0x65fe has been reserved
system 00:0a: ioport range 0x6600-0x66fe has been reserved
system 00:0a: ioport range 0x6700-0x67fe has been reserved
system 00:0a: ioport range 0x6800-0x68fe has been reserved
system 00:0a: ioport range 0x6900-0x69fe has been reserved
system 00:0a: ioport range 0x6a00-0x6afe has been reserved
system 00:0a: ioport range 0x6b00-0x6bfe has been reserved
system 00:0a: ioport range 0x6c00-0x6cfe has been reserved
system 00:0a: ioport range 0x6d00-0x6dfe has been reserved
system 00:0a: ioport range 0x6e00-0x6efe has been reserved
system 00:0a: ioport range 0x6f00-0x6ffe has been reserved
system 00:0a: ioport range 0xa000-0xa0fe has been reserved
system 00:0a: ioport range 0xa100-0xa1fe has been reserved
system 00:0a: ioport range 0xa200-0xa2fe has been reserved
system 00:0a: ioport range 0xa300-0xa3fe has been reserved
system 00:0a: ioport range 0xa400-0xa4fe has been reserved
system 00:0a: ioport range 0xa500-0xa5fe has been reserved
system 00:0a: ioport range 0xa600-0xa6fe has been reserved
system 00:0a: ioport range 0xa700-0xa7fe has been reserved
system 00:0a: ioport range 0xa800-0xa8fe has been reserved
system 00:0a: ioport range 0xa900-0xa9fe has been reserved
system 00:0a: ioport range 0xaa00-0xaafe has been reserved
system 00:0a: ioport range 0xab00-0xabfe has been reserved
system 00:0a: ioport range 0xac00-0xacfe has been reserved
system 00:0a: ioport range 0xad00-0xadfe has been reserved
system 00:0a: ioport range 0xae00-0xaefe has been reserved
system 00:0a: ioport range 0xaf00-0xaffe has been reserved
system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000080200000-0x000000803fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xen_allocate_pirq: returning irq 16 for gsi 16
Already setup the GSI :16
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 129310k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
DMA: Placing 64MB software IO TLB between c9354000 - cd354000
DMA: software IO TLB at phys 0x9354000 - 0xd354000
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1280336983.917:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1280
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Event-channel device installed.
registering netback
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 4 to guest. In use by 'ns16550'.
(XEN) irq.c:1139:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'.
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
xen_allocate_pirq: returning irq 16 for gsi 16
Already setup the GSI :16
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.16 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xen_allocate_pirq: returning irq 21 for gsi 21
Already setup the GSI :21
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
ata3.00: configured for UDMA/133
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.16 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16308 buckets, 65232 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 2:530:189
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: New USB device found, idVendor=413c, idProduct=2003
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Dell USB Keyboard
usb 2-1: Manufacturer: Dell
usb 2-1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard
[Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
usb 2-2: new low speed USB device using uhci_hcd and address 3
usb 2-2: New USB device found, idVendor=046d, idProduct=c050
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB-PS/2 Optical Mouse
usb 2-2: Manufacturer: Logitech
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
generic-usb 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse
[Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
Freeing unused kernel memory: 472k freed
Write protecting the kernel text: 3004k
Write protecting the kernel read-only data: 1412k
Loading, please wait...
mount: mounting none on /dev failed: No such device
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
tg3.c:v3.102 (September 1, 2009)
xen_allocate_pirq: returning irq 16 for gsi 16
Already setup the GSI :16
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001] (PCI Express) MAC address
00:13:72:1b:26:2c
eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Begin: Running /scripts/local-premount ...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
fsck from util-linux-ng 2.17.2
/dev/sda3: clean, 576445/3203072 files, 6361922/12799744 blocks
* Setting sensors limits [80G
[74G[ OK ]
[33m* [39;49m Speech-dispatcher configured for user sessions
* Starting Common Unix Printing System: cupsd [80G
[74G[ OK ]
[33m* [39;49m PulseAudio configured for per-user sessions
* Enabling additional executable binary formats binfmt-support [80G
[74G[ OK ]
* Checking battery state... [80G fsck from util-linux-ng 2.17.2
/dev/sda3: clean, 576445/3203072 files, 6361922/12799744 blocks
* Setting sensors limits [80G
[74G[ OK ]
[33m* [39;49m Speech-dispatcher configured for user sessions
* Starting Common Unix Printing System: cupsd [80G
[74G[ OK ]
[33m* [39;49m PulseAudio configured for per-user sessions
* Enabling additional executable binary formats binfmt-support [80G
[74G[ OK ]
* Checking battery state... [80G
[74G[ OK ]
(XEN) d0:v0: reserved bit in page table (ec=000B)
(XEN) Pagetable walk from f57b3010:
(XEN) L3[0x003] = 00000000230f1001 000030f1
(XEN) L2[0x1ab] = 000000002021f067 0000021f
(XEN) L1[0x1b3] = 800007fffffff0e3 ffffffff
(XEN) ----[ Xen-4.0.1-rc5-pre x86_32p debug=n Tainted: C ]----
(XEN) CPU: 0
(XEN) EIP: 0061:[<ee165d4a>]
(XEN) EFLAGS: 00210202 EM: 0 CONTEXT: pv guest
(XEN) eax: f57b3000 ebx: ecd17ec0 ecx: f57b3010 edx: 007e9000
(XEN) esi: c33b5ba0 edi: ecd547e0 ebp: c3040e60 esp: c3040df4
(XEN) cr0: 80050033 cr4: 000026f0 cr3: 230ed000 cr2: f57b3010
(XEN) ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0069 cs: 0061
(XEN) Guest stack trace from esp=c3040df4:
(XEN) 00000000 c098916c 007e3010 000002b4 00000002 c2628000 00000000 c2753580
(XEN) c33b59c0 c3345414 c2628000 c33b5c00 00000000 ecd17ec0 00000000 00000000
(XEN) 00000002 c33b5c00 c26ba780 c3052690 c3040e78 c05393e0 c3345400 c33b5c40
(XEN) c33b59c0 c3345400 ee181cc0 c3040f04 edc267be 00000054 ee165814 40286454
(XEN) c3040e78 084d4608 00000000 00000003 00000000 00000028 00000000 ffffffff
(XEN) 00000000 00000000 00000000 ffffffff 96f3bf28 e68007ab 00000009 00000050
(XEN) 0f400e57 0000000a 000000d8 00000000 00000000 c3040ed4 00000272 00000000
(XEN) c3040ef4 c04078df 00000000 0f400be5 c085f380 00000000 ee181774 c328b788
(XEN) c3040efc c328b788 ee181774 c328b788 c3040f24 c04ab054 bfa88518 bfa88518
(XEN) 40286454 c271ba00 c271ba00 bfa88518 c3040f8c c04ab596 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 c271ba00 bfa88518
(XEN) 40286454 c3040f84 c050c7f5 c271ba00 bfa88518 40286454 c3040fac c04ab615
(XEN) bfa88518 00000000 00000000 00000009 084d3628 bfa88518 c3040000 c0409329
(XEN) 00000009 40286454 bfa88518 084d3628 bfa88518 bfa88558 00000036 0000007b
(XEN) 0000007b c0400000 00000000 00000036 b7730416 00000073 00200206 bfa88494
(XEN) 0000007b 00000000 00000000 c268d860 c0863f7c 00000000 00000000 00000000
(XEN) 00000000 c0000000 c0442512 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 b77dc424 00000000 00000000 57ac6e9d 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BUG: unable to handle kernel paging request at f57b3010
IP: [<ee165d4a>] i915_gem_execbuffer+0x536/0xc7c [i915]
*pdpt = 00000000030f1001 *pde = 000000000021f067 *pte = 80000ffffffff06b
Oops: 000b [#1] SMP
last sysfs file: /sys/devices/virtual/vtconsole/vtcon0/uevent
Modules linked in: i915 drm_kms_helper drm i2c_algo_bit i2c_core video
output ipt_MASQUERADE iptable_nat nf_nat bridge stp ipv6 snd_intel8x0
snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event
snd_seq snd_timer snd_seq_device dcdbas ppdev snd lp parport_pc
serio_raw soundcore snd_page_alloc parport tg3 libphy
Pid: 4030, comm: Xorg Not tainted (2.6.32.16 #1) OptiPlex GX620
EIP: 0061:[<ee165d4a>] EFLAGS: 00210202 CPU: 0
EIP is at i915_gem_execbuffer+0x536/0xc7c [i915]
EAX: f57b3000 EBX: ecd17ec0 ECX: f57b3010 EDX: 007e9000
ESI: c33b5ba0 EDI: ecd547e0 EBP: c3040e60 ESP: c3040df4
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0069
Process Xorg (pid: 4030, ti=c3040000 task=c268cbc0 task.ti=c3040000)
Stack:
00000000 c098916c 007e3010 000002b4 00000002 c2628000 00000000 c2753580
<0> c33b59c0 c3345414 c2628000 c33b5c00 00000000 ecd17ec0 00000000 00000000
<0> 00000002 c33b5c00 c26ba780 c3052690 c3040e78 c05393e0 c3345400 c33b5c40
Call Trace:
[<c05393e0>] ? might_fault+0x19/0x1b
[<edc267be>] ? drm_ioctl+0x1f5/0x283 [drm]
[<ee165814>] ? i915_gem_execbuffer+0x0/0xc7c [i915]
[<c04078df>] ? __xen_spin_lock+0xcb/0xdf
[<c04ab054>] ? vfs_ioctl+0x57/0x71
[<c04ab596>] ? do_vfs_ioctl+0x489/0x4c7
[<c050c7f5>] ? selinux_file_ioctl+0x3e/0x41
[<c04ab615>] ? sys_ioctl+0x41/0x61
[<c0409329>] ? syscall_call+0x7/0xb
Code: 8b 45 a8 81 e2 00 f0 ff ff 8b 88 10 0e 00 00 89 c8 e8 a9 bf ff
ff 8b 4d dc 8b 53 04 03 51 34 8b 4d 9c 81 e1 ff 0f 00 00 8d 0c 08 <89>
11 ba 07 00 00 00 e8 7a 30 2c d2 8b 45 dc 8b 40 34 c7 43 14
EIP: [<ee165d4a>] i915_gem_execbuffer+0x536/0xc7c [i915] SS:ESP 0069:c3040df4
CR2: 00000000f57b3010
---[ end trace bc95345f211f0e5d ]---
note: Xorg[4030] exited with preempt_count 1
BUG: scheduling while atomic: Xorg/4030/0x10000001
Modules linked in: i915 drm_kms_helper drm i2c_algo_bit i2c_core video
output ipt_MASQUERADE iptable_nat nf_nat bridge stp ipv6 snd_intel8x0
snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event
snd_seq snd_timer snd_seq_device dcdbas ppdev snd lp parport_pc
serio_raw soundcore snd_page_alloc parport tg3 libphy
Pid: 4030, comm: Xorg Tainted: G D 2.6.32.16 #1
Call Trace:
[<c0433f2e>] ? __schedule_bug+0x37/0x51
[<c0433f43>] __schedule_bug+0x4c/0x51
[<c06e88b0>] schedule+0x8d/0x841
[<c0406677>] ? xen_force_evtchn_callback+0xf/0x14
[<c0406d9b>] ? xen_restore_fl_direct_end+0x0/0x1
[<c0540626>] ? atomic64_cmpxchg+0x11/0x16
[<c06e917b>] _cond_resched+0x29/0x42
[<c04557f6>] might_fault+0x19/0x1b
[<c0456911>] exit_robust_list+0x24/0x115
[<c0437bb3>] mm_release+0x21/0xad
[<c043b0e5>] exit_mm+0x18/0xe3
[<c043caa7>] do_exit+0x19e/0x594
[<c06e86b9>] ? printk+0xf/0x16
[<c06eaf63>] oops_end+0x9d/0xa5
[<c0425197>] no_context+0x136/0x140
[<c0425288>] __bad_area_nosemaphore+0xe7/0xef
[<c06ebe37>] ? do_page_fault+0x0/0x2fa
[<c042529d>] bad_area_nosemaphore+0xd/0x10
[<c06ebfcb>] do_page_fault+0x194/0x2fa
[<c06ebe37>] ? do_page_fault
Could you help me with this?
Thanks very much!
Best!
Yours,
Sisu
On Wed, Jul 28, 2010 at 12:49 PM, Konrad Rzeszutek Wilk
<konrad.wilk@xxxxxxxxxx> wrote:
> On Wed, Jul 28, 2010 at 11:53:01AM -0500, Sisu Xi wrote:
>> Hi, all:
>>
>> Thanks for all your reply! I really appreciate them!
>>
>> I have downgraded to Grub and it magically starts now. But when it
>> boots up, the screen would flash some times, is this some problem with
>> the graphic card?
>
> No idea what you mean by 'flash' (make a video perhaps?).
> But if you want the latest fixes for graphic problems look here:
>
> http://wiki.xensource.com/xenwiki/XenPVOPSDRM
>
> it has a howto merge the patches in your tree.
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home