I'm not sure I understand what you want me to do, but that does look
interesting and I didn't notice it before.
- chris
On Sun, May 16, 2010 at 3:36 AM, Han, Weidong <weidong.han@xxxxxxxxx> wrote:
> I noticed this line " (XEN) domctl.c:853:d0 XEN_DOMCTL_assign_device: assign
> device (2:0.0) failed" in NOTWORKING.txt. could you add some logs to
> intel_iommu_assign_device to know where it fails? I prefer you to use a clean
> Xen 4.0 environment.
>
> Regards,
> Weidong
>
> -----Original Message-----
> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of chris
> Sent: Saturday, May 15, 2010 5:18 AM
> To: Pasi Kärkkäinen
> Cc: Xen-Devel List; Xen-Users List
> Subject: [Xen-devel] Re: [Xen-users] RE: Xen4 / Intel DX58SO Mobo / VT-d not
> working
>
> Played around with xen_platform_pc, pci_msitranslate, pci_power_mgmt in the
> cfg, none of which seem to have any effect, also tried
> pci=resource_alignment=02:00.0;02:00.1;02:00.2 on dom0 cmdline, no effect.
>
> I'm worn out been fighting this all day. Attached is some various output from
> the machine that works with the same cards and has Xen
> 3.4.2 and the new machine with 4.0 which doesn't work. I'm hoping this
> information can get the right attention and we can figure it out :(
>
> - chris
>
>
> On Fri, May 14, 2010 at 4:50 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>> On Fri, May 14, 2010 at 04:39:54PM -0400, chris wrote:
>>> Alright so a pci sound card works, I tried a geforce 8600 pci e card
>>> and while vga passthrough didnt work it did seem to attach to the
>>> domain ok. So I guess the problem must be somehow related to the
>>> device. I'm still confused since it works in another box.
>>>
>>> I remember there was some reassign_resources or something, maybe the
>>> issue is with some resources the card uses?
>>>
>>
>> http://wiki.xensource.com/xenwiki/XenPCIpassthrough
>>
>> -- Pasi
>>
>>> Below is a lspci -vv of the card
>>>
>>> 02:00.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10
>>> [OHCI])
>>> Subsystem: NEC Corporation Hama USB 2.0 CardBus
>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Interrupt: pin A routed to IRQ 16
>>> Region 0: Memory at d2502000 (32-bit, non-prefetchable)
>>> [disabled] [size=4K]
>>> Capabilities: [40] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel driver in use: pciback
>>>
>>> 02:00.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10
>>> [OHCI])
>>> Subsystem: NEC Corporation Hama USB 2.0 CardBus
>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Interrupt: pin B routed to IRQ 17
>>> Region 0: Memory at d2501000 (32-bit, non-prefetchable)
>>> [disabled] [size=4K]
>>> Capabilities: [40] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel driver in use: pciback
>>>
>>> 02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20
>>> [EHCI])
>>> Subsystem: NEC Corporation USB 2.0
>>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> Interrupt: pin C routed to IRQ 18
>>> Region 0: Memory at d2500000 (32-bit, non-prefetchable)
>>> [disabled] [size=256]
>>> Capabilities: [40] Power Management version 2
>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>> Kernel driver in use: pciback
>>>
>>>
>>> On Fri, May 14, 2010 at 3:46 PM, chris <tknchris@xxxxxxxxx> wrote:
>>> > I added a pci sound card and interestingly that works. I'm digging
>>> > around for another pci-e device to try to identify if its all pci-e
>>> > or only this device. Strange this is that I have a few other
>>> > machines with this same usb controller which is working on 3.4.2.
>>> >
>>> > *scratches head*
>>> >
>>> > - chris
>>> >
>>> > On Fri, May 14, 2010 at 3:21 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>>> >> On Fri, May 14, 2010 at 03:18:02PM -0400, chris wrote:
>>> >>> It is a multifunction device, a pci-e usb controller, so I
>>> >>> assumed all them had to be passed through. I just changed it to
>>> >>> only 02:00.0 and same thing
>>> >>>
>>> >>> test-box2:~# cat /etc/xen/vm-five.cfg | grep pci pci =
>>> >>> ['02:00.0'] test-box2:~# xm create /etc/xen/vm-five.cfg Using
>>> >>> config file "/etc/xen/vm-five.cfg".
>>> >>> Error: Failed to assign device to IOMMU
>>> >>> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>> >>>
>>> >>
>>> >> Hmm.. weird.
>>> >>
>>> >> Two things to try:
>>> >>
>>> >> 1) Try passthru some other device (which is just a single pci id)
>>> >> 2) Try passthru that pci-e usb controller to Linux PV guest and
>>> >> see if that works
>>> >>
>>> >> -- Pasi
>>> >>
>>> >>>
>>> >>> On Fri, May 14, 2010 at 3:11 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>>> >>> > On Fri, May 14, 2010 at 03:05:49PM -0400, chris wrote:
>>> >>> >> Pasi,
>>> >>> >>
>>> >>> >> Tried latest stable/2.6.32.x per your advice, no change.
>>> >>> >> Anyone on xen-devel that can help me troubleshoot further?
>>> >>> >> Everything looks right, can't figure out why vt-d is not
>>> >>> >> working but it must be some kind of bug :(
>>> >>> >>
>>> >>> >
>>> >>> > Did you try the suggestion said earlier.. try to just passthru the
>>> >>> > first pci device?
>>> >>> >
>>> >>> > -- Pasi
>>> >>> >
>>> >>> >> test-box2:~# uname -a
>>> >>> >> Linux test-box2 2.6.32.12 #1 SMP Fri May 14 13:40:05 EDT 2010
>>> >>> >> x86_64 GNU/Linux
>>> >>> >>
>>> >>> >> test-box2:~# xm info | grep virt_caps virt_caps :
>>> >>> >> hvm hvm_directio
>>> >>> >>
>>> >>> >> test-box2:~# xm pci-list-assignable-devices 0000:02:00.0
>>> >>> >> 0000:02:00.1
>>> >>> >> 0000:02:00.2
>>> >>> >>
>>> >>> >> test-box2:~# xm create /etc/xen/vm-five.cfg Using config file
>>> >>> >> "/etc/xen/vm-five.cfg".
>>> >>> >> Error: Failed to assign device to IOMMU
>>> >>> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>> >>> >>
>>> >>> >> test-box2:~# cat /etc/xen/vm-five.cfg | grep -v '#'
>>> >>> >> kernel = '/usr/lib/xen/boot/hvmloader'
>>> >>> >> builder = 'hvm'
>>> >>> >> memory = '1792'
>>> >>> >> device_model='/usr/lib/xen/bin/qemu-dm'
>>> >>> >> disk = [ 'phy:/dev/storage/vm-five,ioemu:hda,w',
>>> >>> >> 'phy:/dev/sr0,ioemu:hdc:cdrom,r'
>>> >>> >> ]
>>> >>> >> name = 'vm-five'
>>> >>> >> vif = ['type=ioemu, bridge=eth0, mac=00:16:3D:37:A1:42']
>>> >>> >> boot='dc'
>>> >>> >> cpus='0-1'
>>> >>> >> vcpus=2
>>> >>> >> acpi=1
>>> >>> >> ahci=1
>>> >>> >> vnc=1
>>> >>> >> sdl=0
>>> >>> >> timer_mode=1
>>> >>> >> usb=1
>>> >>> >> usbdevice='tablet'
>>> >>> >> localtime=1
>>> >>> >> pci = ['02:00.0','02:00.1','02:00.2']
>>> >>> >>
>>> >>> >> On Thu, May 13, 2010 at 2:28 PM, chris <tknchris@xxxxxxxxx> wrote:
>>> >>> >> > Forwarding to xen-devel. Can't seem to get VT-d working with
>>> >>> >> > xen4 from tarball on xen.org 2.6.31.13 pv_ops dom0. On
>>> >>> >> > pasi's advice I tried switching to stable/2.6.32.x branch
>>> >>> >> > for dom0 and that doesnt even build. Did something change recently
>>> >>> >> > thats breaking compilation?
>>> >>> >> >
>>> >>> >> > Attached is xen dmesg with iommu=verbose loglvl=all
>>> >>> >> > guest_loglvl=all, and dom0 dmesg from 2.6.31.x
>>> >>> >> >
>>> >>> >> > Any ideas on why VT-d is not working on this board?
>>> >>> >> > Initialization looks good, xen reports hvm_directio
>>> >>> >> > capability, everything says VT-d should work until domain is
>>> >>> >> > created.
>>> >>> >> >
>>> >>> >> > Any ideas why stable/2.6.32.x wont build?
>>> >>> >> >
>>> >>> >> > - chris
>>> >>> >> >
>>> >>> >> > On Thu, May 13, 2010 at 2:07 PM, chris <tknchris@xxxxxxxxx> wrote:
>>> >>> >> >> I redid it with oldconfig which I didn't think would help
>>> >>> >> >> and same thing. I guess this tree is broken? Can someone
>>> >>> >> >> else try and see if they can build it? Ugh, whata day :)
>>> >>> >> >>
>>> >>> >> >> On Thu, May 13, 2010 at 1:58 PM, Pasi Kärkkäinen <pasik@xxxxxx>
>>> >>> >> >> wrote:
>>> >>> >> >>> On Thu, May 13, 2010 at 01:55:25PM -0400, chris wrote:
>>> >>> >> >>>> I used the default config on the wiki which you created. Steps
>>> >>> >> >>>> I took were:
>>> >>> >> >>>>
>>> >>> >> >>>> # make clean distclean
>>> >>> >> >>>> # wget -O .config
>>> >>> >> >>>> "http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.10-pvops-dom0-xen-stable-x86_64";
>>> >>> >> >>>
>>> >>> >> >>> You should do "make oldconfig" at this point.
>>> >>> >> >>>
>>> >>> >> >>>> # make -j8 bzImage
>>> >>> >> >>>> (blah blah)
>>> >>> >> >>>> LD vmlinux.o
>>> >>> >> >>>> MODPOST vmlinux.o
>>> >>> >> >>>> WARNING: modpost: Found 7 section mismatch(es).
>>> >>> >> >>>> To see full details build your kernel with:
>>> >>> >> >>>> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
>>> >>> >> >>>> GEN .version
>>> >>> >> >>>> CHK include/linux/compile.h
>>> >>> >> >>>> UPD include/linux/compile.h
>>> >>> >> >>>> CC init/version.o
>>> >>> >> >>>> LD init/built-in.o
>>> >>> >> >>>> LD .tmp_vmlinux1
>>> >>> >> >>>> drivers/built-in.o: In function `do_hvm_suspend':
>>> >>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124:
>>> >>> >> >>>> undefined reference to `xenbus_suspend'
>>> >>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138:
>>> >>> >> >>>> undefined reference to `xenbus_resume'
>>> >>> >> >>>> make: *** [.tmp_vmlinux1] Error 1
>>> >>> >> >>>>
>>> >>> >> >>>
>>> >>> >> >>> Hmm.. weird. I wonder if something has changed recently or
>>> >>> >> >>> what's going on in here..
>>> >>> >> >>>
>>> >>> >> >>> -- Pasi
>>> >>> >> >>>
>>> >>> >> >>>>
>>> >>> >> >>>> On Thu, May 13, 2010 at 11:47 AM, Pasi Kärkkäinen
>>> >>> >> >>>> <pasik@xxxxxx> wrote:
>>> >>> >> >>>> > On Thu, May 13, 2010 at 11:33:57AM -0400, chris wrote:
>>> >>> >> >>>> >> Successfully grabbed the sources and failed to build:
>>> >>> >> >>>> >>
>>> >>> >> >>>> >> LD .tmp_vmlinux1
>>> >>> >> >>>> >> drivers/built-in.o: In function `do_hvm_suspend':
>>> >>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124:
>>> >>> >> >>>> >> undefined reference to `xenbus_suspend'
>>> >>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138:
>>> >>> >> >>>> >> undefined reference to `xenbus_resume'
>>> >>> >> >>>> >> make: *** [.tmp_vmlinux1] Error 1
>>> >>> >> >>>> >>
>>> >>> >> >>>> >> :(
>>> >>> >> >>>> >>
>>> >>> >> >>>> >
>>> >>> >> >>>> > Try the example .config files provided on the wiki page.
>>> >>> >> >>>> >
>>> >>> >> >>>> > -- Pasi
>>> >>> >> >>>> >
>>> >>> >> >>>> >> On Thu, May 13, 2010 at 10:14 AM, Pasi Kärkkäinen
>>> >>> >> >>>> >> <pasik@xxxxxx> wrote:
>>> >>> >> >>>> >> > On Thu, May 13, 2010 at 10:12:56AM -0400, chris wrote:
>>> >>> >> >>>> >> >> Pasi,
>>> >>> >> >>>> >> >>
>>> >>> >> >>>> >> >> How do I pull those kernel sources you referenced?
>>> >>> >> >>>> >> >> I see it mentioned on
>>> >>> >> >>>> >> >> http://wiki.xensource.com/xenwiki/XenParavirtOps but no
>>> >>> >> >>>> >> >> details on how to retrieve it.
>>> >>> >> >>>> >> >>
>>> >>> >> >>>> >> >
>>> >>> >> >>>> >> > The instructions are there if you read it carefully..
>>> >>> >> >>>> >> > There's the topic of how to switch branches.
>>> >>> >> >>>> >> >
>>> >>> >> >>>> >> > -- Pasi
>>> >>> >> >>>> >> >
>>> >>> >> >>>> >> >> - chris
>>> >>> >> >>>> >> >>
>>> >>> >> >>>> >> >> On Thu, May 13, 2010 at 8:29 AM, Pasi Kärkkäinen
>>> >>> >> >>>> >> >> <pasik@xxxxxx> wrote:
>>> >>> >> >>>> >> >> > On Wed, May 12, 2010 at 08:41:34PM -0400, chris wrote:
>>> >>> >> >>>> >> >> >> When reading the vtdhowto I noticed the ability to set
>>> >>> >> >>>> >> >> >> iommu=verbose.
>>> >>> >> >>>> >> >> >> Here is that output, I don't know if it helps at
>>> >>> >> >>>> >> >> >> all to figure out what is wrong.
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >> > That seems to be OK:
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >> > (XEN) I/O virtualisation enabled
>>> >>> >> >>>> >> >> > (XEN) I/O virtualisation for PV guests disabled
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >> > So hmm.. I wonder if it's related to MSI stuff?
>>> >>> >> >>>> >> >> > You could try xen.git xen/stable-2.6.32.x branch
>>> >>> >> >>>> >> >> > instead and see if that makes a difference..
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >> > -- Pasi
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> ---------- Forwarded message ----------
>>> >>> >> >>>> >> >> >> From: chris <tknchris@xxxxxxxxx>
>>> >>> >> >>>> >> >> >> Date: Wed, May 12, 2010 at 5:28 PM
>>> >>> >> >>>> >> >> >> Subject: Xen4 / Intel DX58SO Mobo / VT-d not
>>> >>> >> >>>> >> >> >> working
>>> >>> >> >>>> >> >> >> To: Xen-Users List
>>> >>> >> >>>> >> >> >> <xen-users@xxxxxxxxxxxxxxxxxxx>
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> Hello,
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> I've previously been successful with Xen4 and
>>> >>> >> >>>> >> >> >> VT-d on other systems. I am having trouble
>>> >>> >> >>>> >> >> >> getting VT-d passthrough working to a WinXP
>>> >>> >> >>>> >> >> >> domain with DX58SO (Q45) motherboard and i7 930
>>> >>> >> >>>> >> >> >> CPU. VT-d is enabled in bios, xm info shows
>>> >>> >> >>>> >> >> >> hvm_directio capability, I have iommu=1 set, I
>>> >>> >> >>>> >> >> >> have the devices bound to pciback on dom0 cmdline, xm
>>> >>> >> >>>> >> >> >> pci-list-assignable-devices shows the devices as
>>> >>> >> >>>> >> >> >> assignable. When I attempt to start the VM I get the
>>> >>> >> >>>> >> >> >> error:
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
>>> >>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> Below is all the information I can think of that
>>> >>> >> >>>> >> >> >> would be useful to help debug it:
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> BIOS VT-d Enabled:
>>> >>> >> >>>> >> >> >> http://i43.tinypic.com/nl3a5e.jpg
>>> >>> >> >>>> >> >> >> http://i42.tinypic.com/nqvlu1.jpg
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> grub entry:
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> title Xen 4.0.0 / Debian GNU/Linux,
>>> >>> >> >>>> >> >> >> kernel 2.6.31.13 root (hd0,0) kernel
>>> >>> >> >>>> >> >> >> /boot/xen-4.0.0.gz iommu=1 dom0_mem=256M
>>> >>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true module
>>> >>> >> >>>> >> >> >> /boot/vmlinuz-2.6.31.13 root=/dev/md0 ro
>>> >>> >> >>>> >> >> >> console=tty0 xen-pciback.permissive
>>> >>> >> >>>> >> >> >> xen-pciback.hide=(02:00.0)(02:00.1)(02:00.2)(04:
>>> >>> >> >>>> >> >> >> 00.0)(04:00.1)(04:00.2)(07:00.0)(07:00.1)(07:00.
>>> >>> >> >>>> >> >> >> 2)(09:00.0)(09:00.1)(09:00.2) module
>>> >>> >> >>>> >> >> >> /boot/initrd.img-2.6.31.13
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> # xm pci-list-assignable-devices 0000:09:00.0
>>> >>> >> >>>> >> >> >> 0000:09:00.1
>>> >>> >> >>>> >> >> >> 0000:09:00.2
>>> >>> >> >>>> >> >> >> 0000:07:00.0
>>> >>> >> >>>> >> >> >> 0000:07:00.1
>>> >>> >> >>>> >> >> >> 0000:07:00.2
>>> >>> >> >>>> >> >> >> 0000:04:00.0
>>> >>> >> >>>> >> >> >> 0000:04:00.1
>>> >>> >> >>>> >> >> >> 0000:04:00.2
>>> >>> >> >>>> >> >> >> 0000:02:00.0
>>> >>> >> >>>> >> >> >> 0000:02:00.1
>>> >>> >> >>>> >> >> >> 0000:02:00.2
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> # xm info
>>> >>> >> >>>> >> >> >> host : test-box2 release
>>> >>> >> >>>> >> >> >> : 2.6.31.13 version : #2 SMP Wed
>>> >>> >> >>>> >> >> >> May 12 14:11:37 EDT 2010 machine
>>> >>> >> >>>> >> >> >> : x86_64 nr_cpus : 8 nr_nodes
>>> >>> >> >>>> >> >> >> : 1 cores_per_socket : 4 threads_per_core
>>> >>> >> >>>> >> >> >> : 2 cpu_mhz : 2800 hw_caps
>>> >>> >> >>>> >> >> >> :
>>> >>> >> >>>> >> >> >> bfebfbff:28100800:00000000:00001b40:0098e3bd:000
>>> >>> >> >>>> >> >> >> 00000:00000001:00000000 virt_caps :
>>> >>> >> >>>> >> >> >> hvm hvm_directio total_memory : 7950
>>> >>> >> >>>> >> >> >> free_memory : 7812 node_to_cpu
>>> >>> >> >>>> >> >> >> : node0:0-7 node_to_memory : node0:7812
>>> >>> >> >>>> >> >> >> node_to_dma32_mem : node0:3249 max_node_id
>>> >>> >> >>>> >> >> >> : 0 xen_major : 4 xen_minor
>>> >>> >> >>>> >> >> >> : 0 xen_extra : .0 xen_caps
>>> >>> >> >>>> >> >> >> : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32
>>> >>> >> >>>> >> >> >> hvm-3.0-x86_32p hvm-3.0-x86_64 xen_scheduler
>>> >>> >> >>>> >> >> >> : credit xen_pagesize : 4096
>>> >>> >> >>>> >> >> >> platform_params :
>>> >>> >> >>>> >> >> >> virt_start=0xffff800000000000 xen_changeset
>>> >>> >> >>>> >> >> >> : unavailable xen_commandline : iommu=1
>>> >>> >> >>>> >> >> >> dom0_mem=256M dom0_max_vcpus=1
>>> >>> >> >>>> >> >> >> dom0_vcpus_pin=true cc_compiler : gcc
>>> >>> >> >>>> >> >> >> version 4.3.2 (Debian 4.3.2-1.1) cc_compile_by
>>> >>> >> >>>> >> >> >> : root cc_compile_domain :
>>> >>> >> >>>> >> >> >> cc_compile_date : Thu May 6 13:41:25 EDT
>>> >>> >> >>>> >> >> >> 2010 xend_config_format : 4
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> # xm create vm-five.cfg Using config file
>>> >>> >> >>>> >> >> >> "./vm-five.cfg".
>>> >>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
>>> >>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> I feel like I'm missing something really obvious
>>> >>> >> >>>> >> >> >> but I've been at it for a while now and have run
>>> >>> >> >>>> >> >> >> out of brain power. Anyone have any idea what might be
>>> >>> >> >>>> >> >> >> wrong?
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> - chris
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >> >> __ __ _ _ ___ ___
>>> >>> >> >>>> >> >> >> \ \/ /___ _ __ | || | / _ \ / _ \
>>> >>> >> >>>> >> >> >> \ // _ \ \047_ \ | || |_| | | | | | |
>>> >>> >> >>>> >> >> >> / \ __/ | | | |__ _| |_| | |_| |
>>> >>> >> >>>> >> >> >> /_/\_\___|_| |_| |_|(_)___(_)___/
>>> >>> >> >>>> >> >> >>
>>> >>> >> >>>> >> >> >> (XEN) Xen version 4.0.0 (root@) (gcc version
>>> >>> >> >>>> >> >> >> 4.3.2 (Debian 4.3.2-1.1) ) Thu May 6 13:41:25
>>> >>> >> >>>> >> >> >> EDT 2010
>>> >>> >> >>>> >> >> >> (XEN) Latest ChangeSet: unavailable
>>> >>> >> >>>> >> >> >> (XEN) Command line: iommu=verbose dom0_mem=256M
>>> >>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
>>> >>> >> >>>> >> >> >> (XEN) Video information:
>>> >>> >> >>>> >> >> >> (XEN) VGA is text mode 80x25, font 8x16
>>> >>> >> >>>> >> >> >> (XEN) VBE/DDC methods: none; EDID transfer
>>> >>> >> >>>> >> >> >> time: 0 seconds
>>> >>> >> >>>> >> >> >> (XEN) EDID info not retrieved because no DDC
>>> >>> >> >>>> >> >> >> retrieval method detected
>>> >>> >> >>>> >> >> >> (XEN) Disc information:
>>> >>> >> >>>> >> >> >> (XEN) Found 2 MBR signatures
>>> >>> >> >>>> >> >> >> (XEN) Found 2 EDD information structures
>>> >>> >> >>>> >> >> >> (XEN) Xen-e820 RAM map:
>>> >>> >> >>>> >> >> >> (XEN) 0000000000000000 - 000000000008f000
>>> >>> >> >>>> >> >> >> (usable)
>>> >>> >> >>>> >> >> >> (XEN) 000000000008f000 - 0000000000090000
>>> >>> >> >>>> >> >> >> (reserved)
>>> >>> >> >>>> >> >> >> (XEN) 0000000000090000 - 000000000009ec00
>>> >>> >> >>>> >> >> >> (usable)
>>> >>> >> >>>> >> >> >> (XEN) 000000000009ec00 - 00000000000a0000
>>> >>> >> >>>> >> >> >> (reserved)
>>> >>> >> >>>> >> >> >> (XEN) 00000000000e0000 - 0000000000100000
>>> >>> >> >>>> >> >> >> (reserved)
>>> >>> >> >>>> >> >> >> (XEN) 0000000000100000 - 00000000cf4bd000
>>> >>> >> >>>> >> >> >> (usable)
>>> >>> >> >>>> >> >> >> (XEN) 00000000cf4bd000 - 00000000cf4bf000
>>> >>> >> >>>> >> >> >> (reserved)
>>> >>> >> >>>> >> >> >> (XEN) 00000000cf4bf000 - 00000000cf4c2000
>>> >>> >> >>>> >> >> >> (usable)
>>> >>> >> >>>> >> >> >> (XEN) 00000000cf4c2000 - 00000000cf7bf000 (ACPI
>>> >>> >> >>>> >> >> >> NVS)
>>> >>> >> >>>> >> >> >> (XEN) 00000000cf7bf000 - 00000000cf7df000
>>> >>> >> >>>> >> >> >> (usable)
>>> >>> >> >>>> >> >> >> (XEN) 00000000cf7df000 - 00000000cf7ff000 (ACPI
>>> >>> >> >>>> >> >> >> data)
>>> >>> >> >>>> >> >> >> (XEN) 00000000cf7ff000 - 00000000cf800000
>>> >>> >> >>>> >> >> >> (usable)
>>> >>> >> >>>> >> >> >> (XEN) 00000000cf800000 - 00000000d0000000
>>> >>> >> >>>> >> >> >> (reserved)
>>> >>> >> >>>> >> >> >> (XEN) 00000000f8000000 - 00000000fd000000
>>> >>> >> >>>> >> >> >> (reserved)
>>> >>> >> >>>> >> >> >> (XEN) 00000000ffe00000 - 0000000100000000
>>> >>> >> >>>> >> >> >> (reserved)
>>> >>> >> >>>> >> >> >> (XEN) 0000000100000000 - 0000000230000000
>>> >>> >> >>>> >> >> >> (usable)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL )
>>> >>> >> >>>> >> >> >> (XEN) ACPI: XSDT CF7FE120, 0074 (r1 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 1000013)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: FACP CF7FD000, 00F4 (r3 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI Warning (tbfadt-0444): Optional field
>>> >>> >> >>>> >> >> >> "Pm2ControlBlock" has zero address or length:
>>> >>> >> >>>> >> >> >> 0000000000000450/0 [20070126]
>>> >>> >> >>>> >> >> >> (XEN) ACPI: DSDT CF7F8000, 4641 (r2 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: FACS CF728000, 0040
>>> >>> >> >>>> >> >> >> (XEN) ACPI: APIC CF7F7000, 0138 (r2 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: WDDT CF7F6000, 0040 (r1 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: MCFG CF7F5000, 003C (r1 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: ASF! CF7F4000, 00AC (r32 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: HPET CF7F3000, 0038 (r1 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: SSDT CF7E2000, E134 (r1 INTEL SSDT
>>> >>> >> >>>> >> >> >> PM 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: DMAR CF7DF000, 0140 (r1 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: WDTT CF7F1000, 020C (r2 INTEL
>>> >>> >> >>>> >> >> >> DX58SO 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) ACPI: ASPT CF7F2000, 0034 (r4 INTEL
>>> >>> >> >>>> >> >> >> PerfTune 11F6 MSFT 100000D)
>>> >>> >> >>>> >> >> >> (XEN) System RAM: 7950MB (8140820kB)
>>> >>> >> >>>> >> >> >> (XEN) Domain heap initialised
>>> >>> >> >>>> >> >> >> (XEN) Processor #0 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) Processor #2 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) Processor #4 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) Processor #6 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) Processor #1 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) Processor #3 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) Processor #5 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) Processor #7 7:10 APIC version 21
>>> >>> >> >>>> >> >> >> (XEN) IOAPIC[0]: apic_id 8, version 32, address
>>> >>> >> >>>> >> >> >> 0xfec00000, GSI 0-23
>>> >>> >> >>>> >> >> >> (XEN) Enabling APIC mode: Flat. Using 1 I/O
>>> >>> >> >>>> >> >> >> APICs
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:679: Host address width 39
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address =
>>> >>> >> >>>> >> >> >> fe711000
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1b.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address =
>>> >>> >> >>>> >> >> >> fe710000
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr
>>> >>> >> >>>> >> >> >> e9000 end_address e9fff
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr
>>> >>> >> >>>> >> >> >> ea000 end_address eafff
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr
>>> >>> >> >>>> >> >> >> eb000 end_address ebfff
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr
>>> >>> >> >>>> >> >> >> e6000 end_address e6fff
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr
>>> >>> >> >>>> >> >> >> e7000 end_address e7fff
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr
>>> >>> >> >>>> >> >> >> e8000 end_address e8fff
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr
>>> >>> >> >>>> >> >> >> ec000 end_address eefff
>>> >>> >> >>>> >> >> >> (XEN) Using scheduler: SMP Credit Scheduler
>>> >>> >> >>>> >> >> >> (credit)
>>> >>> >> >>>> >> >> >> (XEN) Detected 2800.125 MHz processor.
>>> >>> >> >>>> >> >> >> (XEN) Initing memory sharing.
>>> >>> >> >>>> >> >> >> (XEN) VMX: Supported advanced features:
>>> >>> >> >>>> >> >> >> (XEN) - APIC MMIO access virtualisation
>>> >>> >> >>>> >> >> >> (XEN) - APIC TPR shadow
>>> >>> >> >>>> >> >> >> (XEN) - Extended Page Tables (EPT)
>>> >>> >> >>>> >> >> >> (XEN) - Virtual-Processor Identifiers (VPID)
>>> >>> >> >>>> >> >> >> (XEN) - Virtual NMI
>>> >>> >> >>>> >> >> >> (XEN) - MSR direct-access bitmap
>>> >>> >> >>>> >> >> >> (XEN) HVM: ASIDs enabled.
>>> >>> >> >>>> >> >> >> (XEN) HVM: VMX enabled
>>> >>> >> >>>> >> >> >> (XEN) HVM: Hardware Assisted Paging detected.
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address =
>>> >>> >> >>>> >> >> >> fe711000 iommu->reg = ffff82c3fff57000
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c9008010e60262
>>> >>> >> >>>> >> >> >> ecap = f0207a
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address =
>>> >>> >> >>>> >> >> >> fe710000 iommu->reg = ffff82c3fff56000
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462
>>> >>> >> >>>> >> >> >> ecap = f020fa
>>> >>> >> >>>> >> >> >> (XEN) Intel VT-d Snoop Control not supported.
>>> >>> >> >>>> >> >> >> (XEN) Intel VT-d DMA Passthrough not supported.
>>> >>> >> >>>> >> >> >> (XEN) Intel VT-d Queued Invalidation supported.
>>> >>> >> >>>> >> >> >> (XEN) Intel VT-d Interrupt Remapping supported.
>>> >>> >> >>>> >> >> >> (XEN) I/O virtualisation enabled
>>> >>> >> >>>> >> >> >> (XEN) I/O virtualisation for PV guests disabled
>>> >>> >> >>>> >> >> >> (XEN) Total of 8 processors activated.
>>> >>> >> >>>> >> >> >> (XEN) ENABLING IO-APIC IRQs
>>> >>> >> >>>> >> >> >> (XEN) -> Using new ACK method
>>> >>> >> >>>> >> >> >> (XEN) TSC is reliable, synchronization
>>> >>> >> >>>> >> >> >> unnecessary
>>> >>> >> >>>> >> >> >> (XEN) Platform timer is 14.318MHz HPET
>>> >>> >> >>>> >> >> >> (XEN) Allocated console ring of 16 KiB.
>>> >>> >> >>>> >> >> >> (XEN) Brought up 8 CPUs
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:10.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:10.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf =
>>> >>> >> >>>> >> >> >> 0:14.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf =
>>> >>> >> >>>> >> >> >> 0:14.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf =
>>> >>> >> >>>> >> >> >> 0:14.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:14.3
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:19.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1a.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1a.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1a.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1a.7
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf =
>>> >>> >> >>>> >> >> >> 0:1b.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1d.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1d.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1d.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1d.7
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1f.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1f.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1f.3
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 0:1f.5
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 2:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 2:0.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 2:0.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 4:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 4:0.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 4:0.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf =
>>> >>> >> >>>> >> >> >> 5:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 7:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 7:0.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 7:0.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 9:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 9:0.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 9:0.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf =
>>> >>> >> >>>> >> >> >> a:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.3
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.4
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.5
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.6
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> b:3.7
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:0.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:0.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:2.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:2.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:3.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:3.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:3.4
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:4.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:4.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:4.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:4.3
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:5.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:5.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:5.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:5.3
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:6.0
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:6.1
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:6.2
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf =
>>> >>> >> >>>> >> >> >> 3f:6.3
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695:
>>> >>> >> >>>> >> >> >> iommu_enable_translation: iommu->reg =
>>> >>> >> >>>> >> >> >> ffff82c3fff57000
>>> >>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695:
>>> >>> >> >>>> >> >> >> iommu_enable_translation: iommu->reg =
>>> >>> >> >>>> >> >> >> ffff82c3fff56000
>>> >>> >> >>>> >> >> >> (XEN) *** LOADING DOMAIN 0 ***
>>> >>> >> >>>> >> >> >> (XEN) Xen kernel: 64-bit, lsb, compat32
>>> >>> >> >>>> >> >> >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr
>>> >>> >> >>>> >> >> >> 0x1000000 -> 0x26ae000
>>> >>> >> >>>> >> >> >> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>> >>> >> >>>> >> >> >> (XEN) Dom0 alloc.:
>>> >>> >> >>>> >> >> >> 0000000210000000->0000000220000000
>>> >>> >> >>>> >> >> >> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>> >>> >> >>>> >> >> >> (XEN) Loaded kernel:
>>> >>> >> >>>> >> >> >> ffffffff81000000->ffffffff826ae000
>>> >>> >> >>>> >> >> >> (XEN) Init. ramdisk:
>>> >>> >> >>>> >> >> >> ffffffff826ae000->ffffffff8f4de600
>>> >>> >> >>>> >> >> >> (XEN) Phys-Mach map:
>>> >>> >> >>>> >> >> >> ffffffff8f4df000->ffffffff8f55f000
>>> >>> >> >>>> >> >> >> (XEN) Start info:
>>> >>> >> >>>> >> >> >> ffffffff8f55f000->ffffffff8f55f4b4
>>> >>> >> >>>> >> >> >> (XEN) Page tables:
>>> >>> >> >>>> >> >> >> ffffffff8f560000->ffffffff8f5df000
>>> >>> >> >>>> >> >> >> (XEN) Boot stack:
>>> >>> >> >>>> >> >> >> ffffffff8f5df000->ffffffff8f5e0000
>>> >>> >> >>>> >> >> >> (XEN) TOTAL:
>>> >>> >> >>>> >> >> >> ffffffff80000000->ffffffff8f800000
>>> >>> >> >>>> >> >> >> (XEN) ENTRY ADDRESS: ffffffff81a10860
>>> >>> >> >>>> >> >> >> (XEN) Dom0 has maximum 1 VCPUs
>>> >>> >> >>>> >> >> >> (XEN) Scrubbing Free RAM:
>>> >>> >> >>>> >> >> >> ..............................................................................done.
>>> >>> >> >>>> >> >> >> (XEN) Xen trace buffers: disabled
>>> >>> >> >>>> >> >> >> (XEN) Std. Loglevel: Errors and warnings
>>> >>> >> >>>> >> >> >> (XEN) Guest Loglevel: Nothing (Rate-limited:
>>> >>> >> >>>> >> >> >> Errors and warnings)
>>> >>> >> >>>> >> >> >> (XEN) Xen is relinquishing VGA console.
>>> >>> >> >>>> >> >> >> (XEN) *** Serial input -> DOM0 (type
>>> >>> >> >>>> >> >> >> \047CTRL-a\047 three times to switch input to
>>> >>> >> >>>> >> >> >> Xen)
>>> >>> >> >>>> >> >> >> (XEN) Freed 164kB init memory.
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000
>>> >>> >> >>>> >> >> >> pirq=0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=000009f0
>>> >>> >> >>>> >> >> >> pirq=0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 4 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already
>>> >>> >> >>>> >> >> >> mapped
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000009f0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000
>>> >>> >> >>>> >> >> >> pirq=0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0
>>> >>> >> >>>> >> >> >> pirq=18
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8
>>> >>> >> >>>> >> >> >> pirq=19
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=23, irq=23
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a929
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a929
>>> >>> >> >>>> >> >> >> pirq=23
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8
>>> >>> >> >>>> >> >> >> pirq=19
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0
>>> >>> >> >>>> >> >> >> pirq=18
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0
>>> >>> >> >>>> >> >> >> pirq=16
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0
>>> >>> >> >>>> >> >> >> pirq=16
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8
>>> >>> >> >>>> >> >> >> pirq=19
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0
>>> >>> >> >>>> >> >> >> pirq=18
>>> >>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>>> >>> >> >>>> >> >> >> pin for in-use IRQ!
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >> >> _______________________________________________
>>> >>> >> >>>> >> >> >> Xen-users mailing list
>>> >>> >> >>>> >> >> >> Xen-users@xxxxxxxxxxxxxxxxxxx
>>> >>> >> >>>> >> >> >> http://lists.xensource.com/xen-users
>>> >>> >> >>>> >> >> >
>>> >>> >> >>>> >> >
>>> >>> >> >>>> >
>>> >>> >> >>>
>>> >>> >> >>
>>> >>> >> >
>>> >>> >
>>> >>
>>> >
>>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home
