On Fri, May 14, 2010 at 05:26:22PM -0400, chris wrote:
> My guests are HVM so thats not really possible. Yes the machine with
> 3.4.2 has a hardware IOMMU.
>
What if you install Xen 4.0 to the other machine?
Or Xen 3.4.2 to this machine?
Does it work then?
Trying to figure out if it's hardware/BIOS related,
or Xen version related.
-- Pasi
> - chris
>
> On Fri, May 14, 2010 at 5:25 PM, Sander Eikelenboom
> <linux@xxxxxxxxxxxxxx> wrote:
> > Hello chris,
> >
> > But does the other machine have an IOMMU on 3.4.2 ?
> > I passthrough a few USB controllers my self, but the machine doesn't have a
> > hardware IOMMU,
> > so it uses the SWIOTLB changed by Konrad to work with Xen and let the DMA
> > of the USB controllers work.
> > It's working on xen-4.0.1-testing, xen-next pvops kernel from a few weeks
> > ago, various domU kernel.
> > One domU kernel is a 2.6.33 from Konrad's tree, with patched and backported
> > xhci support from 2.6.34.
> >
> > So perhaps you could try with the IOMMU off, see if it makes a difference,
> > and would point the problem to the IOMMU more specifically.
> > Oh yes, what pci backend mode have you choosen in your dom0 kernel config ?
> > You have 3 options, virtual, passthrough or slot.
> > I allways tend to use passthrough, don't know it it makes a big difference
> > though, but at least all functions get registered under the same device id
> > in the guest.
> >
> >
> >
> > --
> >
> > Sander
> >
> >
> >
> > Friday, May 14, 2010, 9:46:01 PM, you wrote:
> >
> >> I added a pci sound card and interestingly that works. I'm digging
> >> around for another pci-e device to try to identify if its all pci-e or
> >> only this device. Strange this is that I have a few other machines
> >> with this same usb controller which is working on 3.4.2.
> >
> >> *scratches head*
> >
> >> - chris
> >
> >> On Fri, May 14, 2010 at 3:21 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> >>> On Fri, May 14, 2010 at 03:18:02PM -0400, chris wrote:
> >>>> It is a multifunction device, a pci-e usb controller, so I assumed all
> >>>> them had to be passed through. I just changed it to only 02:00.0 and
> >>>> same thing
> >>>>
> >>>> test-box2:~# cat /etc/xen/vm-five.cfg | grep pci
> >>>> pci = ['02:00.0']
> >>>> test-box2:~# xm create /etc/xen/vm-five.cfg
> >>>> Using config file "/etc/xen/vm-five.cfg".
> >>>> Error: Failed to assign device to IOMMU
> >>>> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
> >>>>
> >>>
> >>> Hmm.. weird.
> >>>
> >>> Two things to try:
> >>>
> >>> 1) Try passthru some other device (which is just a single pci id)
> >>> 2) Try passthru that pci-e usb controller to Linux PV guest and see if
> >>> that works
> >>>
> >>> -- Pasi
> >>>
> >>>>
> >>>> On Fri, May 14, 2010 at 3:11 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> >>>> > On Fri, May 14, 2010 at 03:05:49PM -0400, chris wrote:
> >>>> >> Pasi,
> >>>> >>
> >>>> >> Tried latest stable/2.6.32.x per your advice, no change. Anyone on
> >>>> >> xen-devel that can help me troubleshoot further? Everything looks
> >>>> >> right, can't figure out why vt-d is not working but it must be some
> >>>> >> kind of bug :(
> >>>> >>
> >>>> >
> >>>> > Did you try the suggestion said earlier.. try to just passthru the
> >>>> > first pci device?
> >>>> >
> >>>> > -- Pasi
> >>>> >
> >>>> >> test-box2:~# uname -a
> >>>> >> Linux test-box2 2.6.32.12 #1 SMP Fri May 14 13:40:05 EDT 2010 x86_64
> >>>> >> GNU/Linux
> >>>> >>
> >>>> >> test-box2:~# xm info | grep virt_caps
> >>>> >> virt_caps : hvm hvm_directio
> >>>> >>
> >>>> >> test-box2:~# xm pci-list-assignable-devices
> >>>> >> 0000:02:00.0
> >>>> >> 0000:02:00.1
> >>>> >> 0000:02:00.2
> >>>> >>
> >>>> >> test-box2:~# xm create /etc/xen/vm-five.cfg
> >>>> >> Using config file "/etc/xen/vm-five.cfg".
> >>>> >> Error: Failed to assign device to IOMMU
> >>>> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
> >>>> >>
> >>>> >> test-box2:~# cat /etc/xen/vm-five.cfg | grep -v '#'
> >>>> >> kernel = '/usr/lib/xen/boot/hvmloader'
> >>>> >> builder = 'hvm'
> >>>> >> memory = '1792'
> >>>> >> device_model='/usr/lib/xen/bin/qemu-dm'
> >>>> >> disk = [ 'phy:/dev/storage/vm-five,ioemu:hda,w',
> >>>> >> 'phy:/dev/sr0,ioemu:hdc:cdrom,r'
> >>>> >> ]
> >>>> >> name = 'vm-five'
> >>>> >> vif = ['type=ioemu, bridge=eth0, mac=00:16:3D:37:A1:42']
> >>>> >> boot='dc'
> >>>> >> cpus='0-1'
> >>>> >> vcpus=2
> >>>> >> acpi=1
> >>>> >> ahci=1
> >>>> >> vnc=1
> >>>> >> sdl=0
> >>>> >> timer_mode=1
> >>>> >> usb=1
> >>>> >> usbdevice='tablet'
> >>>> >> localtime=1
> >>>> >> pci = ['02:00.0','02:00.1','02:00.2']
> >>>> >>
> >>>> >> On Thu, May 13, 2010 at 2:28 PM, chris <tknchris@xxxxxxxxx> wrote:
> >>>> >> > Forwarding to xen-devel. Can't seem to get VT-d working with xen4
> >>>> >> > from
> >>>> >> > tarball on xen.org 2.6.31.13 pv_ops dom0. On pasi's advice I tried
> >>>> >> > switching to stable/2.6.32.x branch for dom0 and that doesnt even
> >>>> >> > build. Did something change recently thats breaking compilation?
> >>>> >> >
> >>>> >> > Attached is xen dmesg with iommu=verbose loglvl=all
> >>>> >> > guest_loglvl=all,
> >>>> >> > and dom0 dmesg from 2.6.31.x
> >>>> >> >
> >>>> >> > Any ideas on why VT-d is not working on this board? Initialization
> >>>> >> > looks good, xen reports hvm_directio capability, everything says
> >>>> >> > VT-d
> >>>> >> > should work until domain is created.
> >>>> >> >
> >>>> >> > Any ideas why stable/2.6.32.x wont build?
> >>>> >> >
> >>>> >> > - chris
> >>>> >> >
> >>>> >> > On Thu, May 13, 2010 at 2:07 PM, chris <tknchris@xxxxxxxxx> wrote:
> >>>> >> >> I redid it with oldconfig which I didn't think would help and same
> >>>> >> >> thing. I guess this tree is broken? Can someone else try and see if
> >>>> >> >> they can build it? Ugh, whata day :)
> >>>> >> >>
> >>>> >> >> On Thu, May 13, 2010 at 1:58 PM, Pasi Kärkkäinen <pasik@xxxxxx>
> >>>> >> >> wrote:
> >>>> >> >>> On Thu, May 13, 2010 at 01:55:25PM -0400, chris wrote:
> >>>> >> >>>> I used the default config on the wiki which you created. Steps I
> >>>> >> >>>> took were:
> >>>> >> >>>>
> >>>> >> >>>> # make clean distclean
> >>>> >> >>>> # wget -O .config
> >>>> >> >>>> "http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.10-pvops-dom0-xen-stable-x86_64";
> >>>> >> >>>
> >>>> >> >>> You should do "make oldconfig" at this point.
> >>>> >> >>>
> >>>> >> >>>> # make -j8 bzImage
> >>>> >> >>>> (blah blah)
> >>>> >> >>>> LD vmlinux.o
> >>>> >> >>>> MODPOST vmlinux.o
> >>>> >> >>>> WARNING: modpost: Found 7 section mismatch(es).
> >>>> >> >>>> To see full details build your kernel with:
> >>>> >> >>>> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> >>>> >> >>>> GEN .version
> >>>> >> >>>> CHK include/linux/compile.h
> >>>> >> >>>> UPD include/linux/compile.h
> >>>> >> >>>> CC init/version.o
> >>>> >> >>>> LD init/built-in.o
> >>>> >> >>>> LD .tmp_vmlinux1
> >>>> >> >>>> drivers/built-in.o: In function `do_hvm_suspend':
> >>>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined
> >>>> >> >>>> reference
> >>>> >> >>>> to `xenbus_suspend'
> >>>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined
> >>>> >> >>>> reference
> >>>> >> >>>> to `xenbus_resume'
> >>>> >> >>>> make: *** [.tmp_vmlinux1] Error 1
> >>>> >> >>>>
> >>>> >> >>>
> >>>> >> >>> Hmm.. weird. I wonder if something has changed recently or what's
> >>>> >> >>> going on in here..
> >>>> >> >>>
> >>>> >> >>> -- Pasi
> >>>> >> >>>
> >>>> >> >>>>
> >>>> >> >>>> On Thu, May 13, 2010 at 11:47 AM, Pasi Kärkkäinen <pasik@xxxxxx>
> >>>> >> >>>> wrote:
> >>>> >> >>>> > On Thu, May 13, 2010 at 11:33:57AM -0400, chris wrote:
> >>>> >> >>>> >> Successfully grabbed the sources and failed to build:
> >>>> >> >>>> >>
> >>>> >> >>>> >> LD .tmp_vmlinux1
> >>>> >> >>>> >> drivers/built-in.o: In function `do_hvm_suspend':
> >>>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined
> >>>> >> >>>> >> reference
> >>>> >> >>>> >> to `xenbus_suspend'
> >>>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined
> >>>> >> >>>> >> reference
> >>>> >> >>>> >> to `xenbus_resume'
> >>>> >> >>>> >> make: *** [.tmp_vmlinux1] Error 1
> >>>> >> >>>> >>
> >>>> >> >>>> >> :(
> >>>> >> >>>> >>
> >>>> >> >>>> >
> >>>> >> >>>> > Try the example .config files provided on the wiki page.
> >>>> >> >>>> >
> >>>> >> >>>> > -- Pasi
> >>>> >> >>>> >
> >>>> >> >>>> >> On Thu, May 13, 2010 at 10:14 AM, Pasi Kärkkäinen
> >>>> >> >>>> >> <pasik@xxxxxx> wrote:
> >>>> >> >>>> >> > On Thu, May 13, 2010 at 10:12:56AM -0400, chris wrote:
> >>>> >> >>>> >> >> Pasi,
> >>>> >> >>>> >> >>
> >>>> >> >>>> >> >> How do I pull those kernel sources you referenced? I see
> >>>> >> >>>> >> >> it mentioned
> >>>> >> >>>> >> >> on http://wiki.xensource.com/xenwiki/XenParavirtOps but no
> >>>> >> >>>> >> >> details on
> >>>> >> >>>> >> >> how to retrieve it.
> >>>> >> >>>> >> >>
> >>>> >> >>>> >> >
> >>>> >> >>>> >> > The instructions are there if you read it carefully..
> >>>> >> >>>> >> > There's the topic of how to switch branches.
> >>>> >> >>>> >> >
> >>>> >> >>>> >> > -- Pasi
> >>>> >> >>>> >> >
> >>>> >> >>>> >> >> - chris
> >>>> >> >>>> >> >>
> >>>> >> >>>> >> >> On Thu, May 13, 2010 at 8:29 AM, Pasi Kärkkäinen
> >>>> >> >>>> >> >> <pasik@xxxxxx> wrote:
> >>>> >> >>>> >> >> > On Wed, May 12, 2010 at 08:41:34PM -0400, chris wrote:
> >>>> >> >>>> >> >> >> When reading the vtdhowto I noticed the ability to set
> >>>> >> >>>> >> >> >> iommu=verbose.
> >>>> >> >>>> >> >> >> Here is that output, I don't know if it helps at all to
> >>>> >> >>>> >> >> >> figure out
> >>>> >> >>>> >> >> >> what is wrong.
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >> > That seems to be OK:
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >> > (XEN) I/O virtualisation enabled
> >>>> >> >>>> >> >> > (XEN) I/O virtualisation for PV guests disabled
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >> > So hmm.. I wonder if it's related to MSI stuff?
> >>>> >> >>>> >> >> > You could try xen.git xen/stable-2.6.32.x branch instead
> >>>> >> >>>> >> >> > and see if that makes a difference..
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >> > -- Pasi
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> ---------- Forwarded message ----------
> >>>> >> >>>> >> >> >> From: chris <tknchris@xxxxxxxxx>
> >>>> >> >>>> >> >> >> Date: Wed, May 12, 2010 at 5:28 PM
> >>>> >> >>>> >> >> >> Subject: Xen4 / Intel DX58SO Mobo / VT-d not working
> >>>> >> >>>> >> >> >> To: Xen-Users List <xen-users@xxxxxxxxxxxxxxxxxxx>
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> Hello,
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> I've previously been successful with Xen4 and VT-d on
> >>>> >> >>>> >> >> >> other systems. I
> >>>> >> >>>> >> >> >> am having trouble getting VT-d passthrough working to a
> >>>> >> >>>> >> >> >> WinXP domain
> >>>> >> >>>> >> >> >> with DX58SO (Q45) motherboard and i7 930 CPU. VT-d is
> >>>> >> >>>> >> >> >> enabled in bios,
> >>>> >> >>>> >> >> >> xm info shows hvm_directio capability, I have iommu=1
> >>>> >> >>>> >> >> >> set, I have the
> >>>> >> >>>> >> >> >> devices bound to pciback on dom0 cmdline, xm
> >>>> >> >>>> >> >> >> pci-list-assignable-devices shows the devices as
> >>>> >> >>>> >> >> >> assignable. When I
> >>>> >> >>>> >> >> >> attempt to start the VM I get the error:
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
> >>>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> Below is all the information I can think of that would
> >>>> >> >>>> >> >> >> be useful to
> >>>> >> >>>> >> >> >> help debug it:
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> BIOS VT-d Enabled:
> >>>> >> >>>> >> >> >> http://i43.tinypic.com/nl3a5e.jpg
> >>>> >> >>>> >> >> >> http://i42.tinypic.com/nqvlu1.jpg
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> grub entry:
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> title Xen 4.0.0 / Debian GNU/Linux, kernel
> >>>> >> >>>> >> >> >> 2.6.31.13
> >>>> >> >>>> >> >> >> root (hd0,0)
> >>>> >> >>>> >> >> >> kernel /boot/xen-4.0.0.gz iommu=1 dom0_mem=256M
> >>>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
> >>>> >> >>>> >> >> >> module /boot/vmlinuz-2.6.31.13 root=/dev/md0
> >>>> >> >>>> >> >> >> ro console=tty0
> >>>> >> >>>> >> >> >> xen-pciback.permissive
> >>>> >> >>>> >> >> >> xen-pciback.hide=(02:00.0)(02:00.1)(02:00.2)(04:00.0)(04:00.1)(04:00.2)(07:00.0)(07:00.1)(07:00.2)(09:00.0)(09:00.1)(09:00.2)
> >>>> >> >>>> >> >> >> module /boot/initrd.img-2.6.31.13
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> # xm pci-list-assignable-devices
> >>>> >> >>>> >> >> >> 0000:09:00.0
> >>>> >> >>>> >> >> >> 0000:09:00.1
> >>>> >> >>>> >> >> >> 0000:09:00.2
> >>>> >> >>>> >> >> >> 0000:07:00.0
> >>>> >> >>>> >> >> >> 0000:07:00.1
> >>>> >> >>>> >> >> >> 0000:07:00.2
> >>>> >> >>>> >> >> >> 0000:04:00.0
> >>>> >> >>>> >> >> >> 0000:04:00.1
> >>>> >> >>>> >> >> >> 0000:04:00.2
> >>>> >> >>>> >> >> >> 0000:02:00.0
> >>>> >> >>>> >> >> >> 0000:02:00.1
> >>>> >> >>>> >> >> >> 0000:02:00.2
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> # xm info
> >>>> >> >>>> >> >> >> host : test-box2
> >>>> >> >>>> >> >> >> release : 2.6.31.13
> >>>> >> >>>> >> >> >> version : #2 SMP Wed May 12 14:11:37 EDT
> >>>> >> >>>> >> >> >> 2010
> >>>> >> >>>> >> >> >> machine : x86_64
> >>>> >> >>>> >> >> >> nr_cpus : 8
> >>>> >> >>>> >> >> >> nr_nodes : 1
> >>>> >> >>>> >> >> >> cores_per_socket : 4
> >>>> >> >>>> >> >> >> threads_per_core : 2
> >>>> >> >>>> >> >> >> cpu_mhz : 2800
> >>>> >> >>>> >> >> >> hw_caps :
> >>>> >> >>>> >> >> >> bfebfbff:28100800:00000000:00001b40:0098e3bd:00000000:00000001:00000000
> >>>> >> >>>> >> >> >> virt_caps : hvm hvm_directio
> >>>> >> >>>> >> >> >> total_memory : 7950
> >>>> >> >>>> >> >> >> free_memory : 7812
> >>>> >> >>>> >> >> >> node_to_cpu : node0:0-7
> >>>> >> >>>> >> >> >> node_to_memory : node0:7812
> >>>> >> >>>> >> >> >> node_to_dma32_mem : node0:3249
> >>>> >> >>>> >> >> >> max_node_id : 0
> >>>> >> >>>> >> >> >> xen_major : 4
> >>>> >> >>>> >> >> >> xen_minor : 0
> >>>> >> >>>> >> >> >> xen_extra : .0
> >>>> >> >>>> >> >> >> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p
> >>>> >> >>>> >> >> >> hvm-3.0-x86_32
> >>>> >> >>>> >> >> >> hvm-3.0-x86_32p hvm-3.0-x86_64
> >>>> >> >>>> >> >> >> xen_scheduler : credit
> >>>> >> >>>> >> >> >> xen_pagesize : 4096
> >>>> >> >>>> >> >> >> platform_params : virt_start=0xffff800000000000
> >>>> >> >>>> >> >> >> xen_changeset : unavailable
> >>>> >> >>>> >> >> >> xen_commandline : iommu=1 dom0_mem=256M
> >>>> >> >>>> >> >> >> dom0_max_vcpus=1
> >>>> >> >>>> >> >> >> dom0_vcpus_pin=true
> >>>> >> >>>> >> >> >> cc_compiler : gcc version 4.3.2 (Debian
> >>>> >> >>>> >> >> >> 4.3.2-1.1)
> >>>> >> >>>> >> >> >> cc_compile_by : root
> >>>> >> >>>> >> >> >> cc_compile_domain :
> >>>> >> >>>> >> >> >> cc_compile_date : Thu May 6 13:41:25 EDT 2010
> >>>> >> >>>> >> >> >> xend_config_format : 4
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> # xm create vm-five.cfg
> >>>> >> >>>> >> >> >> Using config file "./vm-five.cfg".
> >>>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
> >>>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> I feel like I'm missing something really obvious but
> >>>> >> >>>> >> >> >> I've been at it
> >>>> >> >>>> >> >> >> for a while now and have run out of brain power. Anyone
> >>>> >> >>>> >> >> >> have any idea
> >>>> >> >>>> >> >> >> what might be wrong?
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> - chris
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >> >> __ __ _ _ ___ ___
> >>>> >> >>>> >> >> >> \ \/ /___ _ __ | || | / _ \ / _ \
> >>>> >> >>>> >> >> >> \ // _ \ \047_ \ | || |_| | | | | | |
> >>>> >> >>>> >> >> >> / \ __/ | | | |__ _| |_| | |_| |
> >>>> >> >>>> >> >> >> /_/\_\___|_| |_| |_|(_)___(_)___/
> >>>> >> >>>> >> >> >>
> >>>> >> >>>> >> >> >> (XEN) Xen version 4.0.0 (root@) (gcc version 4.3.2
> >>>> >> >>>> >> >> >> (Debian 4.3.2-1.1) ) Thu May 6 13:41:25 EDT 2010
> >>>> >> >>>> >> >> >> (XEN) Latest ChangeSet: unavailable
> >>>> >> >>>> >> >> >> (XEN) Command line: iommu=verbose dom0_mem=256M
> >>>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
> >>>> >> >>>> >> >> >> (XEN) Video information:
> >>>> >> >>>> >> >> >> (XEN) VGA is text mode 80x25, font 8x16
> >>>> >> >>>> >> >> >> (XEN) VBE/DDC methods: none; EDID transfer time: 0
> >>>> >> >>>> >> >> >> seconds
> >>>> >> >>>> >> >> >> (XEN) EDID info not retrieved because no DDC retrieval
> >>>> >> >>>> >> >> >> method detected
> >>>> >> >>>> >> >> >> (XEN) Disc information:
> >>>> >> >>>> >> >> >> (XEN) Found 2 MBR signatures
> >>>> >> >>>> >> >> >> (XEN) Found 2 EDD information structures
> >>>> >> >>>> >> >> >> (XEN) Xen-e820 RAM map:
> >>>> >> >>>> >> >> >> (XEN) 0000000000000000 - 000000000008f000 (usable)
> >>>> >> >>>> >> >> >> (XEN) 000000000008f000 - 0000000000090000 (reserved)
> >>>> >> >>>> >> >> >> (XEN) 0000000000090000 - 000000000009ec00 (usable)
> >>>> >> >>>> >> >> >> (XEN) 000000000009ec00 - 00000000000a0000 (reserved)
> >>>> >> >>>> >> >> >> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> >>>> >> >>>> >> >> >> (XEN) 0000000000100000 - 00000000cf4bd000 (usable)
> >>>> >> >>>> >> >> >> (XEN) 00000000cf4bd000 - 00000000cf4bf000 (reserved)
> >>>> >> >>>> >> >> >> (XEN) 00000000cf4bf000 - 00000000cf4c2000 (usable)
> >>>> >> >>>> >> >> >> (XEN) 00000000cf4c2000 - 00000000cf7bf000 (ACPI NVS)
> >>>> >> >>>> >> >> >> (XEN) 00000000cf7bf000 - 00000000cf7df000 (usable)
> >>>> >> >>>> >> >> >> (XEN) 00000000cf7df000 - 00000000cf7ff000 (ACPI data)
> >>>> >> >>>> >> >> >> (XEN) 00000000cf7ff000 - 00000000cf800000 (usable)
> >>>> >> >>>> >> >> >> (XEN) 00000000cf800000 - 00000000d0000000 (reserved)
> >>>> >> >>>> >> >> >> (XEN) 00000000f8000000 - 00000000fd000000 (reserved)
> >>>> >> >>>> >> >> >> (XEN) 00000000ffe00000 - 0000000100000000 (reserved)
> >>>> >> >>>> >> >> >> (XEN) 0000000100000000 - 0000000230000000 (usable)
> >>>> >> >>>> >> >> >> (XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL )
> >>>> >> >>>> >> >> >> (XEN) ACPI: XSDT CF7FE120, 0074 (r1 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 1000013)
> >>>> >> >>>> >> >> >> (XEN) ACPI: FACP CF7FD000, 00F4 (r3 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI Warning (tbfadt-0444): Optional field
> >>>> >> >>>> >> >> >> "Pm2ControlBlock" has zero address or length:
> >>>> >> >>>> >> >> >> 0000000000000450/0 [20070126]
> >>>> >> >>>> >> >> >> (XEN) ACPI: DSDT CF7F8000, 4641 (r2 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: FACS CF728000, 0040
> >>>> >> >>>> >> >> >> (XEN) ACPI: APIC CF7F7000, 0138 (r2 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: WDDT CF7F6000, 0040 (r1 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: MCFG CF7F5000, 003C (r1 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: ASF! CF7F4000, 00AC (r32 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: HPET CF7F3000, 0038 (r1 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: SSDT CF7E2000, E134 (r1 INTEL SSDT PM
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: DMAR CF7DF000, 0140 (r1 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: WDTT CF7F1000, 020C (r2 INTEL DX58SO
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) ACPI: ASPT CF7F2000, 0034 (r4 INTEL PerfTune
> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
> >>>> >> >>>> >> >> >> (XEN) System RAM: 7950MB (8140820kB)
> >>>> >> >>>> >> >> >> (XEN) Domain heap initialised
> >>>> >> >>>> >> >> >> (XEN) Processor #0 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) Processor #2 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) Processor #4 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) Processor #6 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) Processor #1 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) Processor #3 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) Processor #5 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) Processor #7 7:10 APIC version 21
> >>>> >> >>>> >> >> >> (XEN) IOAPIC[0]: apic_id 8, version 32, address
> >>>> >> >>>> >> >> >> 0xfec00000, GSI 0-23
> >>>> >> >>>> >> >> >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:679: Host address width 39
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe711000
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1b.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe710000
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e9000
> >>>> >> >>>> >> >> >> end_address e9fff
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ea000
> >>>> >> >>>> >> >> >> end_address eafff
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr eb000
> >>>> >> >>>> >> >> >> end_address ebfff
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e6000
> >>>> >> >>>> >> >> >> end_address e6fff
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e7000
> >>>> >> >>>> >> >> >> end_address e7fff
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e8000
> >>>> >> >>>> >> >> >> end_address e8fff
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000
> >>>> >> >>>> >> >> >> end_address eefff
> >>>> >> >>>> >> >> >> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> >>>> >> >>>> >> >> >> (XEN) Detected 2800.125 MHz processor.
> >>>> >> >>>> >> >> >> (XEN) Initing memory sharing.
> >>>> >> >>>> >> >> >> (XEN) VMX: Supported advanced features:
> >>>> >> >>>> >> >> >> (XEN) - APIC MMIO access virtualisation
> >>>> >> >>>> >> >> >> (XEN) - APIC TPR shadow
> >>>> >> >>>> >> >> >> (XEN) - Extended Page Tables (EPT)
> >>>> >> >>>> >> >> >> (XEN) - Virtual-Processor Identifiers (VPID)
> >>>> >> >>>> >> >> >> (XEN) - Virtual NMI
> >>>> >> >>>> >> >> >> (XEN) - MSR direct-access bitmap
> >>>> >> >>>> >> >> >> (XEN) HVM: ASIDs enabled.
> >>>> >> >>>> >> >> >> (XEN) HVM: VMX enabled
> >>>> >> >>>> >> >> >> (XEN) HVM: Hardware Assisted Paging detected.
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe711000
> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff57000
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c9008010e60262 ecap =
> >>>> >> >>>> >> >> >> f0207a
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe710000
> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff56000
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap =
> >>>> >> >>>> >> >> >> f020fa
> >>>> >> >>>> >> >> >> (XEN) Intel VT-d Snoop Control not supported.
> >>>> >> >>>> >> >> >> (XEN) Intel VT-d DMA Passthrough not supported.
> >>>> >> >>>> >> >> >> (XEN) Intel VT-d Queued Invalidation supported.
> >>>> >> >>>> >> >> >> (XEN) Intel VT-d Interrupt Remapping supported.
> >>>> >> >>>> >> >> >> (XEN) I/O virtualisation enabled
> >>>> >> >>>> >> >> >> (XEN) I/O virtualisation for PV guests disabled
> >>>> >> >>>> >> >> >> (XEN) Total of 8 processors activated.
> >>>> >> >>>> >> >> >> (XEN) ENABLING IO-APIC IRQs
> >>>> >> >>>> >> >> >> (XEN) -> Using new ACK method
> >>>> >> >>>> >> >> >> (XEN) TSC is reliable, synchronization unnecessary
> >>>> >> >>>> >> >> >> (XEN) Platform timer is 14.318MHz HPET
> >>>> >> >>>> >> >> >> (XEN) Allocated console ring of 16 KiB.
> >>>> >> >>>> >> >> >> (XEN) Brought up 8 CPUs
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:19.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.5
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = a:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.3
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.4
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.5
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.6
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.7
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.4
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.3
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.3
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.0
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.1
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.2
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.3
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation:
> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff57000
> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation:
> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff56000
> >>>> >> >>>> >> >> >> (XEN) *** LOADING DOMAIN 0 ***
> >>>> >> >>>> >> >> >> (XEN) Xen kernel: 64-bit, lsb, compat32
> >>>> >> >>>> >> >> >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000
> >>>> >> >>>> >> >> >> -> 0x26ae000
> >>>> >> >>>> >> >> >> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> >>>> >> >>>> >> >> >> (XEN) Dom0 alloc.: 0000000210000000->0000000220000000
> >>>> >> >>>> >> >> >> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> >>>> >> >>>> >> >> >> (XEN) Loaded kernel: ffffffff81000000->ffffffff826ae000
> >>>> >> >>>> >> >> >> (XEN) Init. ramdisk: ffffffff826ae000->ffffffff8f4de600
> >>>> >> >>>> >> >> >> (XEN) Phys-Mach map: ffffffff8f4df000->ffffffff8f55f000
> >>>> >> >>>> >> >> >> (XEN) Start info: ffffffff8f55f000->ffffffff8f55f4b4
> >>>> >> >>>> >> >> >> (XEN) Page tables: ffffffff8f560000->ffffffff8f5df000
> >>>> >> >>>> >> >> >> (XEN) Boot stack: ffffffff8f5df000->ffffffff8f5e0000
> >>>> >> >>>> >> >> >> (XEN) TOTAL: ffffffff80000000->ffffffff8f800000
> >>>> >> >>>> >> >> >> (XEN) ENTRY ADDRESS: ffffffff81a10860
> >>>> >> >>>> >> >> >> (XEN) Dom0 has maximum 1 VCPUs
> >>>> >> >>>> >> >> >> (XEN) Scrubbing Free RAM:
> >>>> >> >>>> >> >> >> ..............................................................................done.
> >>>> >> >>>> >> >> >> (XEN) Xen trace buffers: disabled
> >>>> >> >>>> >> >> >> (XEN) Std. Loglevel: Errors and warnings
> >>>> >> >>>> >> >> >> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
> >>>> >> >>>> >> >> >> warnings)
> >>>> >> >>>> >> >> >> (XEN) Xen is relinquishing VGA console.
> >>>> >> >>>> >> >> >> (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047
> >>>> >> >>>> >> >> >> three times to switch input to Xen)
> >>>> >> >>>> >> >> >> (XEN) Freed 164kB init memory.
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 4 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000009f0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=23, irq=23
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a929
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a929 pirq=23
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin
> >>>> >> >>>> >> >> >> for in-use IRQ!
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >> >> _______________________________________________
> >>>> >> >>>> >> >> >> Xen-users mailing list
> >>>> >> >>>> >> >> >> Xen-users@xxxxxxxxxxxxxxxxxxx
> >>>> >> >>>> >> >> >> http://lists.xensource.com/xen-users
> >>>> >> >>>> >> >> >
> >>>> >> >>>> >> >
> >>>> >> >>>> >
> >>>> >> >>>
> >>>> >> >>
> >>>> >> >
> >>>> >
> >>>
> >
> >
> >
> >
> >
> > --
> > Best regards,
> > Sander mailto:linux@xxxxxxxxxxxxxx
> >
> >
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home
