It is a multifunction device, a pci-e usb controller, so I assumed all
them had to be passed through. I just changed it to only 02:00.0 and
same thing
test-box2:~# cat /etc/xen/vm-five.cfg | grep pci
pci = ['02:00.0']
test-box2:~# xm create /etc/xen/vm-five.cfg
Using config file "/etc/xen/vm-five.cfg".
Error: Failed to assign device to IOMMU
(0000:02:00.0@100,msitranslate=1,power_mgmt=0)
On Fri, May 14, 2010 at 3:11 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> On Fri, May 14, 2010 at 03:05:49PM -0400, chris wrote:
>> Pasi,
>>
>> Tried latest stable/2.6.32.x per your advice, no change. Anyone on
>> xen-devel that can help me troubleshoot further? Everything looks
>> right, can't figure out why vt-d is not working but it must be some
>> kind of bug :(
>>
>
> Did you try the suggestion said earlier.. try to just passthru the first pci
> device?
>
> -- Pasi
>
>> test-box2:~# uname -a
>> Linux test-box2 2.6.32.12 #1 SMP Fri May 14 13:40:05 EDT 2010 x86_64
>> GNU/Linux
>>
>> test-box2:~# xm info | grep virt_caps
>> virt_caps : hvm hvm_directio
>>
>> test-box2:~# xm pci-list-assignable-devices
>> 0000:02:00.0
>> 0000:02:00.1
>> 0000:02:00.2
>>
>> test-box2:~# xm create /etc/xen/vm-five.cfg
>> Using config file "/etc/xen/vm-five.cfg".
>> Error: Failed to assign device to IOMMU
>> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>
>> test-box2:~# cat /etc/xen/vm-five.cfg | grep -v '#'
>> kernel = '/usr/lib/xen/boot/hvmloader'
>> builder = 'hvm'
>> memory = '1792'
>> device_model='/usr/lib/xen/bin/qemu-dm'
>> disk = [ 'phy:/dev/storage/vm-five,ioemu:hda,w',
>> 'phy:/dev/sr0,ioemu:hdc:cdrom,r'
>> ]
>> name = 'vm-five'
>> vif = ['type=ioemu, bridge=eth0, mac=00:16:3D:37:A1:42']
>> boot='dc'
>> cpus='0-1'
>> vcpus=2
>> acpi=1
>> ahci=1
>> vnc=1
>> sdl=0
>> timer_mode=1
>> usb=1
>> usbdevice='tablet'
>> localtime=1
>> pci = ['02:00.0','02:00.1','02:00.2']
>>
>> On Thu, May 13, 2010 at 2:28 PM, chris <tknchris@xxxxxxxxx> wrote:
>> > Forwarding to xen-devel. Can't seem to get VT-d working with xen4 from
>> > tarball on xen.org 2.6.31.13 pv_ops dom0. On pasi's advice I tried
>> > switching to stable/2.6.32.x branch for dom0 and that doesnt even
>> > build. Did something change recently thats breaking compilation?
>> >
>> > Attached is xen dmesg with iommu=verbose loglvl=all guest_loglvl=all,
>> > and dom0 dmesg from 2.6.31.x
>> >
>> > Any ideas on why VT-d is not working on this board? Initialization
>> > looks good, xen reports hvm_directio capability, everything says VT-d
>> > should work until domain is created.
>> >
>> > Any ideas why stable/2.6.32.x wont build?
>> >
>> > - chris
>> >
>> > On Thu, May 13, 2010 at 2:07 PM, chris <tknchris@xxxxxxxxx> wrote:
>> >> I redid it with oldconfig which I didn't think would help and same
>> >> thing. I guess this tree is broken? Can someone else try and see if
>> >> they can build it? Ugh, whata day :)
>> >>
>> >> On Thu, May 13, 2010 at 1:58 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>> >>> On Thu, May 13, 2010 at 01:55:25PM -0400, chris wrote:
>> >>>> I used the default config on the wiki which you created. Steps I took
>> >>>> were:
>> >>>>
>> >>>> # make clean distclean
>> >>>> # wget -O .config
>> >>>> "http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.10-pvops-dom0-xen-stable-x86_64";
>> >>>
>> >>> You should do "make oldconfig" at this point.
>> >>>
>> >>>> # make -j8 bzImage
>> >>>> (blah blah)
>> >>>> LD vmlinux.o
>> >>>> MODPOST vmlinux.o
>> >>>> WARNING: modpost: Found 7 section mismatch(es).
>> >>>> To see full details build your kernel with:
>> >>>> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
>> >>>> GEN .version
>> >>>> CHK include/linux/compile.h
>> >>>> UPD include/linux/compile.h
>> >>>> CC init/version.o
>> >>>> LD init/built-in.o
>> >>>> LD .tmp_vmlinux1
>> >>>> drivers/built-in.o: In function `do_hvm_suspend':
>> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined reference
>> >>>> to `xenbus_suspend'
>> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined reference
>> >>>> to `xenbus_resume'
>> >>>> make: *** [.tmp_vmlinux1] Error 1
>> >>>>
>> >>>
>> >>> Hmm.. weird. I wonder if something has changed recently or what's going
>> >>> on in here..
>> >>>
>> >>> -- Pasi
>> >>>
>> >>>>
>> >>>> On Thu, May 13, 2010 at 11:47 AM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>> >>>> > On Thu, May 13, 2010 at 11:33:57AM -0400, chris wrote:
>> >>>> >> Successfully grabbed the sources and failed to build:
>> >>>> >>
>> >>>> >> LD .tmp_vmlinux1
>> >>>> >> drivers/built-in.o: In function `do_hvm_suspend':
>> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined reference
>> >>>> >> to `xenbus_suspend'
>> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined reference
>> >>>> >> to `xenbus_resume'
>> >>>> >> make: *** [.tmp_vmlinux1] Error 1
>> >>>> >>
>> >>>> >> :(
>> >>>> >>
>> >>>> >
>> >>>> > Try the example .config files provided on the wiki page.
>> >>>> >
>> >>>> > -- Pasi
>> >>>> >
>> >>>> >> On Thu, May 13, 2010 at 10:14 AM, Pasi Kärkkäinen <pasik@xxxxxx>
>> >>>> >> wrote:
>> >>>> >> > On Thu, May 13, 2010 at 10:12:56AM -0400, chris wrote:
>> >>>> >> >> Pasi,
>> >>>> >> >>
>> >>>> >> >> How do I pull those kernel sources you referenced? I see it
>> >>>> >> >> mentioned
>> >>>> >> >> on http://wiki.xensource.com/xenwiki/XenParavirtOps but no
>> >>>> >> >> details on
>> >>>> >> >> how to retrieve it.
>> >>>> >> >>
>> >>>> >> >
>> >>>> >> > The instructions are there if you read it carefully..
>> >>>> >> > There's the topic of how to switch branches.
>> >>>> >> >
>> >>>> >> > -- Pasi
>> >>>> >> >
>> >>>> >> >> - chris
>> >>>> >> >>
>> >>>> >> >> On Thu, May 13, 2010 at 8:29 AM, Pasi Kärkkäinen <pasik@xxxxxx>
>> >>>> >> >> wrote:
>> >>>> >> >> > On Wed, May 12, 2010 at 08:41:34PM -0400, chris wrote:
>> >>>> >> >> >> When reading the vtdhowto I noticed the ability to set
>> >>>> >> >> >> iommu=verbose.
>> >>>> >> >> >> Here is that output, I don't know if it helps at all to figure
>> >>>> >> >> >> out
>> >>>> >> >> >> what is wrong.
>> >>>> >> >> >>
>> >>>> >> >> >
>> >>>> >> >> > That seems to be OK:
>> >>>> >> >> >
>> >>>> >> >> > (XEN) I/O virtualisation enabled
>> >>>> >> >> > (XEN) I/O virtualisation for PV guests disabled
>> >>>> >> >> >
>> >>>> >> >> > So hmm.. I wonder if it's related to MSI stuff?
>> >>>> >> >> > You could try xen.git xen/stable-2.6.32.x branch instead and
>> >>>> >> >> > see if that makes a difference..
>> >>>> >> >> >
>> >>>> >> >> > -- Pasi
>> >>>> >> >> >
>> >>>> >> >> >>
>> >>>> >> >> >> ---------- Forwarded message ----------
>> >>>> >> >> >> From: chris <tknchris@xxxxxxxxx>
>> >>>> >> >> >> Date: Wed, May 12, 2010 at 5:28 PM
>> >>>> >> >> >> Subject: Xen4 / Intel DX58SO Mobo / VT-d not working
>> >>>> >> >> >> To: Xen-Users List <xen-users@xxxxxxxxxxxxxxxxxxx>
>> >>>> >> >> >>
>> >>>> >> >> >>
>> >>>> >> >> >> Hello,
>> >>>> >> >> >>
>> >>>> >> >> >> I've previously been successful with Xen4 and VT-d on other
>> >>>> >> >> >> systems. I
>> >>>> >> >> >> am having trouble getting VT-d passthrough working to a WinXP
>> >>>> >> >> >> domain
>> >>>> >> >> >> with DX58SO (Q45) motherboard and i7 930 CPU. VT-d is enabled
>> >>>> >> >> >> in bios,
>> >>>> >> >> >> xm info shows hvm_directio capability, I have iommu=1 set, I
>> >>>> >> >> >> have the
>> >>>> >> >> >> devices bound to pciback on dom0 cmdline, xm
>> >>>> >> >> >> pci-list-assignable-devices shows the devices as assignable.
>> >>>> >> >> >> When I
>> >>>> >> >> >> attempt to start the VM I get the error:
>> >>>> >> >> >>
>> >>>> >> >> >> Error: Failed to assign device to IOMMU
>> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>> >>>> >> >> >>
>> >>>> >> >> >> Below is all the information I can think of that would be
>> >>>> >> >> >> useful to
>> >>>> >> >> >> help debug it:
>> >>>> >> >> >>
>> >>>> >> >> >> BIOS VT-d Enabled:
>> >>>> >> >> >> http://i43.tinypic.com/nl3a5e.jpg
>> >>>> >> >> >> http://i42.tinypic.com/nqvlu1.jpg
>> >>>> >> >> >>
>> >>>> >> >> >> grub entry:
>> >>>> >> >> >>
>> >>>> >> >> >> title Xen 4.0.0 / Debian GNU/Linux, kernel 2.6.31.13
>> >>>> >> >> >> root (hd0,0)
>> >>>> >> >> >> kernel /boot/xen-4.0.0.gz iommu=1 dom0_mem=256M
>> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
>> >>>> >> >> >> module /boot/vmlinuz-2.6.31.13 root=/dev/md0 ro
>> >>>> >> >> >> console=tty0
>> >>>> >> >> >> xen-pciback.permissive
>> >>>> >> >> >> xen-pciback.hide=(02:00.0)(02:00.1)(02:00.2)(04:00.0)(04:00.1)(04:00.2)(07:00.0)(07:00.1)(07:00.2)(09:00.0)(09:00.1)(09:00.2)
>> >>>> >> >> >> module /boot/initrd.img-2.6.31.13
>> >>>> >> >> >>
>> >>>> >> >> >> # xm pci-list-assignable-devices
>> >>>> >> >> >> 0000:09:00.0
>> >>>> >> >> >> 0000:09:00.1
>> >>>> >> >> >> 0000:09:00.2
>> >>>> >> >> >> 0000:07:00.0
>> >>>> >> >> >> 0000:07:00.1
>> >>>> >> >> >> 0000:07:00.2
>> >>>> >> >> >> 0000:04:00.0
>> >>>> >> >> >> 0000:04:00.1
>> >>>> >> >> >> 0000:04:00.2
>> >>>> >> >> >> 0000:02:00.0
>> >>>> >> >> >> 0000:02:00.1
>> >>>> >> >> >> 0000:02:00.2
>> >>>> >> >> >>
>> >>>> >> >> >> # xm info
>> >>>> >> >> >> host : test-box2
>> >>>> >> >> >> release : 2.6.31.13
>> >>>> >> >> >> version : #2 SMP Wed May 12 14:11:37 EDT 2010
>> >>>> >> >> >> machine : x86_64
>> >>>> >> >> >> nr_cpus : 8
>> >>>> >> >> >> nr_nodes : 1
>> >>>> >> >> >> cores_per_socket : 4
>> >>>> >> >> >> threads_per_core : 2
>> >>>> >> >> >> cpu_mhz : 2800
>> >>>> >> >> >> hw_caps :
>> >>>> >> >> >> bfebfbff:28100800:00000000:00001b40:0098e3bd:00000000:00000001:00000000
>> >>>> >> >> >> virt_caps : hvm hvm_directio
>> >>>> >> >> >> total_memory : 7950
>> >>>> >> >> >> free_memory : 7812
>> >>>> >> >> >> node_to_cpu : node0:0-7
>> >>>> >> >> >> node_to_memory : node0:7812
>> >>>> >> >> >> node_to_dma32_mem : node0:3249
>> >>>> >> >> >> max_node_id : 0
>> >>>> >> >> >> xen_major : 4
>> >>>> >> >> >> xen_minor : 0
>> >>>> >> >> >> xen_extra : .0
>> >>>> >> >> >> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p
>> >>>> >> >> >> hvm-3.0-x86_32
>> >>>> >> >> >> hvm-3.0-x86_32p hvm-3.0-x86_64
>> >>>> >> >> >> xen_scheduler : credit
>> >>>> >> >> >> xen_pagesize : 4096
>> >>>> >> >> >> platform_params : virt_start=0xffff800000000000
>> >>>> >> >> >> xen_changeset : unavailable
>> >>>> >> >> >> xen_commandline : iommu=1 dom0_mem=256M dom0_max_vcpus=1
>> >>>> >> >> >> dom0_vcpus_pin=true
>> >>>> >> >> >> cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
>> >>>> >> >> >> cc_compile_by : root
>> >>>> >> >> >> cc_compile_domain :
>> >>>> >> >> >> cc_compile_date : Thu May 6 13:41:25 EDT 2010
>> >>>> >> >> >> xend_config_format : 4
>> >>>> >> >> >>
>> >>>> >> >> >> # xm create vm-five.cfg
>> >>>> >> >> >> Using config file "./vm-five.cfg".
>> >>>> >> >> >> Error: Failed to assign device to IOMMU
>> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>> >>>> >> >> >>
>> >>>> >> >> >> I feel like I'm missing something really obvious but I've been
>> >>>> >> >> >> at it
>> >>>> >> >> >> for a while now and have run out of brain power. Anyone have
>> >>>> >> >> >> any idea
>> >>>> >> >> >> what might be wrong?
>> >>>> >> >> >>
>> >>>> >> >> >> - chris
>> >>>> >> >> >
>> >>>> >> >> >> __ __ _ _ ___ ___
>> >>>> >> >> >> \ \/ /___ _ __ | || | / _ \ / _ \
>> >>>> >> >> >> \ // _ \ \047_ \ | || |_| | | | | | |
>> >>>> >> >> >> / \ __/ | | | |__ _| |_| | |_| |
>> >>>> >> >> >> /_/\_\___|_| |_| |_|(_)___(_)___/
>> >>>> >> >> >>
>> >>>> >> >> >> (XEN) Xen version 4.0.0 (root@) (gcc version 4.3.2 (Debian
>> >>>> >> >> >> 4.3.2-1.1) ) Thu May 6 13:41:25 EDT 2010
>> >>>> >> >> >> (XEN) Latest ChangeSet: unavailable
>> >>>> >> >> >> (XEN) Command line: iommu=verbose dom0_mem=256M
>> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
>> >>>> >> >> >> (XEN) Video information:
>> >>>> >> >> >> (XEN) VGA is text mode 80x25, font 8x16
>> >>>> >> >> >> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
>> >>>> >> >> >> (XEN) EDID info not retrieved because no DDC retrieval method
>> >>>> >> >> >> detected
>> >>>> >> >> >> (XEN) Disc information:
>> >>>> >> >> >> (XEN) Found 2 MBR signatures
>> >>>> >> >> >> (XEN) Found 2 EDD information structures
>> >>>> >> >> >> (XEN) Xen-e820 RAM map:
>> >>>> >> >> >> (XEN) 0000000000000000 - 000000000008f000 (usable)
>> >>>> >> >> >> (XEN) 000000000008f000 - 0000000000090000 (reserved)
>> >>>> >> >> >> (XEN) 0000000000090000 - 000000000009ec00 (usable)
>> >>>> >> >> >> (XEN) 000000000009ec00 - 00000000000a0000 (reserved)
>> >>>> >> >> >> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
>> >>>> >> >> >> (XEN) 0000000000100000 - 00000000cf4bd000 (usable)
>> >>>> >> >> >> (XEN) 00000000cf4bd000 - 00000000cf4bf000 (reserved)
>> >>>> >> >> >> (XEN) 00000000cf4bf000 - 00000000cf4c2000 (usable)
>> >>>> >> >> >> (XEN) 00000000cf4c2000 - 00000000cf7bf000 (ACPI NVS)
>> >>>> >> >> >> (XEN) 00000000cf7bf000 - 00000000cf7df000 (usable)
>> >>>> >> >> >> (XEN) 00000000cf7df000 - 00000000cf7ff000 (ACPI data)
>> >>>> >> >> >> (XEN) 00000000cf7ff000 - 00000000cf800000 (usable)
>> >>>> >> >> >> (XEN) 00000000cf800000 - 00000000d0000000 (reserved)
>> >>>> >> >> >> (XEN) 00000000f8000000 - 00000000fd000000 (reserved)
>> >>>> >> >> >> (XEN) 00000000ffe00000 - 0000000100000000 (reserved)
>> >>>> >> >> >> (XEN) 0000000100000000 - 0000000230000000 (usable)
>> >>>> >> >> >> (XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL )
>> >>>> >> >> >> (XEN) ACPI: XSDT CF7FE120, 0074 (r1 INTEL DX58SO 11F6
>> >>>> >> >> >> 1000013)
>> >>>> >> >> >> (XEN) ACPI: FACP CF7FD000, 00F4 (r3 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI Warning (tbfadt-0444): Optional field
>> >>>> >> >> >> "Pm2ControlBlock" has zero address or length:
>> >>>> >> >> >> 0000000000000450/0 [20070126]
>> >>>> >> >> >> (XEN) ACPI: DSDT CF7F8000, 4641 (r2 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: FACS CF728000, 0040
>> >>>> >> >> >> (XEN) ACPI: APIC CF7F7000, 0138 (r2 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: WDDT CF7F6000, 0040 (r1 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: MCFG CF7F5000, 003C (r1 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: ASF! CF7F4000, 00AC (r32 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: HPET CF7F3000, 0038 (r1 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: SSDT CF7E2000, E134 (r1 INTEL SSDT PM 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: DMAR CF7DF000, 0140 (r1 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: WDTT CF7F1000, 020C (r2 INTEL DX58SO 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) ACPI: ASPT CF7F2000, 0034 (r4 INTEL PerfTune 11F6
>> >>>> >> >> >> MSFT 100000D)
>> >>>> >> >> >> (XEN) System RAM: 7950MB (8140820kB)
>> >>>> >> >> >> (XEN) Domain heap initialised
>> >>>> >> >> >> (XEN) Processor #0 7:10 APIC version 21
>> >>>> >> >> >> (XEN) Processor #2 7:10 APIC version 21
>> >>>> >> >> >> (XEN) Processor #4 7:10 APIC version 21
>> >>>> >> >> >> (XEN) Processor #6 7:10 APIC version 21
>> >>>> >> >> >> (XEN) Processor #1 7:10 APIC version 21
>> >>>> >> >> >> (XEN) Processor #3 7:10 APIC version 21
>> >>>> >> >> >> (XEN) Processor #5 7:10 APIC version 21
>> >>>> >> >> >> (XEN) Processor #7 7:10 APIC version 21
>> >>>> >> >> >> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000,
>> >>>> >> >> >> GSI 0-23
>> >>>> >> >> >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:679: Host address width 39
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe711000
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1b.0
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe710000
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e9000
>> >>>> >> >> >> end_address e9fff
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ea000
>> >>>> >> >> >> end_address eafff
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr eb000
>> >>>> >> >> >> end_address ebfff
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e6000
>> >>>> >> >> >> end_address e6fff
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e7000
>> >>>> >> >> >> end_address e7fff
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e8000
>> >>>> >> >> >> end_address e8fff
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
>> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000
>> >>>> >> >> >> end_address eefff
>> >>>> >> >> >> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>> >>>> >> >> >> (XEN) Detected 2800.125 MHz processor.
>> >>>> >> >> >> (XEN) Initing memory sharing.
>> >>>> >> >> >> (XEN) VMX: Supported advanced features:
>> >>>> >> >> >> (XEN) - APIC MMIO access virtualisation
>> >>>> >> >> >> (XEN) - APIC TPR shadow
>> >>>> >> >> >> (XEN) - Extended Page Tables (EPT)
>> >>>> >> >> >> (XEN) - Virtual-Processor Identifiers (VPID)
>> >>>> >> >> >> (XEN) - Virtual NMI
>> >>>> >> >> >> (XEN) - MSR direct-access bitmap
>> >>>> >> >> >> (XEN) HVM: ASIDs enabled.
>> >>>> >> >> >> (XEN) HVM: VMX enabled
>> >>>> >> >> >> (XEN) HVM: Hardware Assisted Paging detected.
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe711000 iommu->reg
>> >>>> >> >> >> = ffff82c3fff57000
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c9008010e60262 ecap = f0207a
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe710000 iommu->reg
>> >>>> >> >> >> = ffff82c3fff56000
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f020fa
>> >>>> >> >> >> (XEN) Intel VT-d Snoop Control not supported.
>> >>>> >> >> >> (XEN) Intel VT-d DMA Passthrough not supported.
>> >>>> >> >> >> (XEN) Intel VT-d Queued Invalidation supported.
>> >>>> >> >> >> (XEN) Intel VT-d Interrupt Remapping supported.
>> >>>> >> >> >> (XEN) I/O virtualisation enabled
>> >>>> >> >> >> (XEN) I/O virtualisation for PV guests disabled
>> >>>> >> >> >> (XEN) Total of 8 processors activated.
>> >>>> >> >> >> (XEN) ENABLING IO-APIC IRQs
>> >>>> >> >> >> (XEN) -> Using new ACK method
>> >>>> >> >> >> (XEN) TSC is reliable, synchronization unnecessary
>> >>>> >> >> >> (XEN) Platform timer is 14.318MHz HPET
>> >>>> >> >> >> (XEN) Allocated console ring of 16 KiB.
>> >>>> >> >> >> (XEN) Brought up 8 CPUs
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:19.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.5
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = a:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.3
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.4
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.5
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.6
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.7
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.4
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.3
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.3
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.0
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.1
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.2
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.3
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg
>> >>>> >> >> >> = ffff82c3fff57000
>> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg
>> >>>> >> >> >> = ffff82c3fff56000
>> >>>> >> >> >> (XEN) *** LOADING DOMAIN 0 ***
>> >>>> >> >> >> (XEN) Xen kernel: 64-bit, lsb, compat32
>> >>>> >> >> >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->
>> >>>> >> >> >> 0x26ae000
>> >>>> >> >> >> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>> >>>> >> >> >> (XEN) Dom0 alloc.: 0000000210000000->0000000220000000
>> >>>> >> >> >> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>> >>>> >> >> >> (XEN) Loaded kernel: ffffffff81000000->ffffffff826ae000
>> >>>> >> >> >> (XEN) Init. ramdisk: ffffffff826ae000->ffffffff8f4de600
>> >>>> >> >> >> (XEN) Phys-Mach map: ffffffff8f4df000->ffffffff8f55f000
>> >>>> >> >> >> (XEN) Start info: ffffffff8f55f000->ffffffff8f55f4b4
>> >>>> >> >> >> (XEN) Page tables: ffffffff8f560000->ffffffff8f5df000
>> >>>> >> >> >> (XEN) Boot stack: ffffffff8f5df000->ffffffff8f5e0000
>> >>>> >> >> >> (XEN) TOTAL: ffffffff80000000->ffffffff8f800000
>> >>>> >> >> >> (XEN) ENTRY ADDRESS: ffffffff81a10860
>> >>>> >> >> >> (XEN) Dom0 has maximum 1 VCPUs
>> >>>> >> >> >> (XEN) Scrubbing Free RAM:
>> >>>> >> >> >> ..............................................................................done.
>> >>>> >> >> >> (XEN) Xen trace buffers: disabled
>> >>>> >> >> >> (XEN) Std. Loglevel: Errors and warnings
>> >>>> >> >> >> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
>> >>>> >> >> >> warnings)
>> >>>> >> >> >> (XEN) Xen is relinquishing VGA console.
>> >>>> >> >> >> (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three
>> >>>> >> >> >> times to switch input to Xen)
>> >>>> >> >> >> (XEN) Freed 164kB init memory.
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 4 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
>> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000009f0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=23, irq=23
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a929
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a929 pirq=23
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for
>> >>>> >> >> >> in-use IRQ!
>> >>>> >> >> >
>> >>>> >> >> >> _______________________________________________
>> >>>> >> >> >> Xen-users mailing list
>> >>>> >> >> >> Xen-users@xxxxxxxxxxxxxxxxxxx
>> >>>> >> >> >> http://lists.xensource.com/xen-users
>> >>>> >> >> >
>> >>>> >> >
>> >>>> >
>> >>>
>> >>
>> >
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home
