On Mon, Mar 22, 2010 at 02:48:18PM -0700, kishore kumar wrote:
> Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0
> earlyprintk=xen nomodeset initcall_debug debug loglevel=10
>
> If I change the Logvol00 to LovVol00 then it booted up. (lower case v
> to upper case V)
>
> Is the command line case sensitive??
>
Yes, it is case sensitive, just like 99% of the things in Linux/Unix world.
-- Pasi
> On Mon, Mar 22, 2010 at 1:31 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
> On Mon, Mar 22, 2010 at 01:23:24PM -0700, kishore kumar wrote:
> > xend was not running so I did below steps and rebooted. The system
> did
> > not boot up. SO I removed the line added in /proc/fstab and again
> > rebooted. Attached is the captured file. Can you please let me
> know what
> > is going wrong again?
> >
>
> Please send the logs as text files, not word documents!
>
> Mounting root filesystem.
> mount: could not find filesystem '/dev/root'
> Setting up other filesystems.
> Setting up new root fs
> setuproot: moving /dev failed: No such file or directory
> no fstab.sys, mounting internal defaults
> setuproot: error mounting /proc: No such file or directory
> setuproot: error mounting /sys: No such file or directory
> Switching to new root and running init.
> unmounting old /dev
> unmounting old /proc
> unmounting old /sys
> switchroot: mount failed: No such file or directory
>
> Looks like wrong root= parameter again..
>
> Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0
> earlyprintk=xen nomodeset initcall_debug debug loglevel=10
>
> Was "/dev/VolGroup01/Logvol00" your root device?
>
> -- Pasi
>
> > step 1. I loaded the xen-evtchn.ko by insmod.
> >
> >
> >
> > step 2: And added the below line in /proc/fstab.
> >
> >
> >
> > none /proc/xen xenfs defaults 0 0
> >
> >
> > Thanks
> >
> > On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen
> <[1][2]pasik@xxxxxx> wrote:
> >
> > On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote:
> > > Attached is the captured file.
> > >
> > > Now the machine booted up. :) 2.6.32.10 is booted.
> > >
> > > But I dont see xen up and running.
> > >
> > > Whe I open Virtual Machine Manager I dont see xen running.
> > (ATTACHED IS
> > > THE SCREEN SHOT).
> > >
> >
> > - Do you have /proc/xen (xenfs) mounted?
> > - Do you have xen-evtchn driver module loaded in dom0?
> > - Do you have xend running?
> >
> > Please see and read this wiki page:
> > [2][3]http://wiki.xensource.com/xenwiki/XenParavirtOps
> >
> > It explains the other configurations you need to do for Xen/xend
> to
> > actually work.
> >
> > Anyway, the problem for you was wrong grub.conf root= option for
> the
> > dom0 kernel.
> >
> > -- Pasi
> >
> > > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen
> > <[1][3][4]pasik@xxxxxx> wrote:
> > >
> > > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy
> Fitzhardinge
> > wrote:
> > > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote:
> > > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar
> wrote:
> > > >>
> > > >>> Attached is the capture log after changing the
> grub.conf
> > to
> > > >>>
> > > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0
> > earlyprintk=xen
> > > nomodeset
> > > >>> initcall_debug debug swiotlb=force apic=debug
> loglevel=10
> > > >>>
> > > >>> for the dom 0 kernel command line.
> > > >>>
> > > >>>
> > > >> Hmm, interesting. Now it seems to crash in a different
> place.
> > > >>
> > > >> Jeremy: Have you seen this one earlier?
> > > >>
> > > >
> > > > No, but it looks like the result of "apic=debug" on the
> kernel
> > command
> > > > line. That won't do anything useful (the kernel has no
> APICs,
> > they
> > > all
> > > > belong to Xen), and can only cause harm. As it appears
> to have
> > done.
> > > >
> > >
> > > Ok, my bad.
> > >
> > > So please remove the "apic=debug" from the dom0 kernel
> cmdline
> > and try
> > > again.
> > > It should look like this:
> > >
> > > ro root=/dev/VolGroup01/LogVol00 console=hvc0
> earlyprintk=xen
> > nomodeset
> > > initcall_debug debug loglevel=10
> > >
> > > -- Pasi
> > >
> > > > J
> > > >
> > > >> .... IRQ redirection table:
> > > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> > > >> 00 000 0 0 0 0 0 0 0 00
> > > >> IRQ to pin mappings:
> > > >> BUG: unable to handle kernel NULL pointer dereference
> at
> > (null)
> > > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
> > > >> PGD 0
> > > >> Oops: 0000 [#1] SMP
> > > >> last sysfs file:
> > > >> CPU 0
> > > >> Modules linked in:
> > > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2
> > > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>]
> > > print_all_ICs+0x487/0x500
> > > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286
> > > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX:
> > 000000000f640f01
> > > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI:
> > 0000000000000000
> > > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09:
> > 0000000000000000
> > > >> R10: 0000000000000000 R11: ffff880064edbce0 R12:
> > 0000000000000000
> > > >> R13: 0000000000000000 R14: 0000000000000000 R15:
> > 0000000000000000
> > > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000)
> > > knlGS:0000000000000000
> > > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> > > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4:
> > 0000000000002660
> > > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> > 0000000000000000
> > > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
> > 0000000000000400
> > > >> Process swapper (pid: 1, threadinfo ffff880064eda000,
> task
> > > ffff880064ee0000)
> > > >> Stack:
> > > >> ffff880000000000 ffffffff00000000 ffff880000000000
> > ffffffff811ebee8
> > > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002
> > > 0000000000000002
> > > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660
> > > 00000000291fd332
> > > >> Call Trace:
> > > >> [<ffffffff811ebee8>] ?
> debugfs_create_file+0x239/0x28e
> > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
> > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
> > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
> > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
> > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20
> > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
> > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30
> > > >> [<ffffffff8108ae5b>] ?
> trace_hardirqs_off_caller+0x2f/0x89
> > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
> > > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31
> c0 45 31
> > e4 e8
> > > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48
> 8b 58
> > 40<48>
> > > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8
> d4
> > > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
> > > >> RSP<ffff880064edbe20>
> > > >> CR2: 0000000000000000
> > > >> ---[ end trace 0007ad9d59420718 ]---
> > > >> swapper used greatest stack depth: 4168 bytes left
> > > >> Kernel panic - not syncing: Attempted to kill init!
> > > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2
> > > >> Call Trace:
> > > >> [<ffffffff8105b747>] panic+0xa5/0x167
> > > >> [<ffffffff8100ed81>] ?
> xen_force_evtchn_callback+0xd/0xf
> > > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701
> > > >> [<ffffffff8100f43f>] ?
> xen_restore_fl_direct_end+0x0/0x1
> > > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184
> > > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
> > > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
> > > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701
> > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
> > > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7
> > > >> [<ffffffff81038a02>] no_context+0x1f1/0x200
> > > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
> > > >> [<ffffffff81038c61>]
> __bad_area_nosemaphore+0x191/0x1b4
> > > >> [<ffffffff8100f452>] ? check_events+0x12/0x20
> > > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15
> > > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2
> > > >> [<ffffffff814769d5>] page_fault+0x25/0x30
> > > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500
> > > >> [<ffffffff811ebee8>] ?
> debugfs_create_file+0x239/0x28e
> > > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
> > > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
> > > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
> > > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
> > > >> [<ffffffff81013eaa>] child_rip+0xa/0x20
> > > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
> > > >> [<ffffffff81013810>] ? restore_args+0x0/0x30
> > > >> [<ffffffff8108ae5b>] ?
> trace_hardirqs_off_caller+0x2f/0x89
> > > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
> > > >>
> > > >>
> > > >> -- Pasi
> > > >>
> > > >>
> > > >>
> > > >>>
> > > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi
> > > Kärkkäinen<[1][2][4][5]pasik@xxxxxx> wrote:
> > > >>>
> > > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700,
> kishore kumar
> > wrote:
> > > >>> > pvdisplay does not work in my RHEL
> machine.
> > > >>> >
> > > >>> > I did pvscan.
> > > >>> > below is the output.
> > > >>> >
> > > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB
> / 0
> > free]
> > > >>> >
> > > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78
> GB] / in
> > no VG:
> > > 0 [0 ]
> > > >>> >
> > > >>>
> > > >>> Ok so /dev/sda2 is the correct device holding
> the
> > VolGroup01.
> > > >>>
> > > >>> Looking at your latest capture.doc I see this:
> > > >>>
> > > >>> Command line: ro root=/dev/vg00/lv01
> console=hvc0
> > > earlyprintk=xen
> > > >>> nomodeset initcall_debug debug swiotlb=force
> apic=debug
> > > loglevel=10
> > > >>>
> > > >>> So your root= parameter is wrong! Edit grub.conf
> and
> > replace
> > > it with the
> > > >>> actual root device:
> > > >>> root=/dev/VolGroup01/LogVol00
> > > >>>
> > > >>> -- Pasi
> > > >>>
> > > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi
> Kärkkäinen
> > > >>> <[1][2][3][5][6]pasik@xxxxxx> wrote:
> > > >>> >
> > > >>> > On Thu, Mar 18, 2010 at 11:16:26AM
> -0700,
> > kishore
> > > kumar wrote:
> > > >>> > > I did the below steps for pvops
> dom 0
> > kernel.
> > > >>> > >
> > > >>> > > make menuconfig
> > > >>> > > make bzImage
> > > >>> > > make modules
> > > >>> > > make modules_install
> > > >>> > > cp -a .config
> /boot/config-2.6.32.10
> > > >>> > > cp -a System.map
> > /boot/System.map-2.6.32.10
> > > >>> > > cp -a arch/x86/boot/bzImage
> > > /boot/vmlinuz-2.6.32.10
> > > >>> > > /sbin/mkinitrd -f --builtin=ahci
> > > /boot/initrd-2.6.32.10.img
> > > >>> > 2.6.32.10
> > > >>> > > I tried
> root=/dev/VolGroup01/LogVol00 .
> > > >>> > >
> > > >>> >
> > > >>> > Ok.
> > > >>> >
> > > >>> > Please run "pvdisplay" to see which
> actual
> > partition
> > > is the LVM
> > > >>> PV for
> > > >>> > your
> > > >>> > volume group.
> > > >>> >
> > > >>> > Also if you're running Fedora 12 you
> could try
> > > generating an
> > > >>> initrd
> > > >>> > image
> > > >>> > with dracut instead of mkinitrd.
> > > >>> >
> > > >>> > -- Pasi
> > > >>> >
> > > >>> > >
> > > >>> > > On Thu, Mar 18, 2010 at 9:15 AM,
> Pasi
> > Kärkkäinen
> > > >>> > <[1][2][3][4][6][7]pasik@xxxxxx> wrote:
> > > >>> > >
> > > >>> > > On Wed, Mar 17, 2010 at
> 03:20:13PM
> > -0700,
> > > kishore kumar
> > > >>> wrote:
> > > >>> > > > Here is the output of df
> -h and
> > cat
> > > /etc/fstab of my
> > > >>> > machine.
> > > >>> > > >
> > > >>> > >
> > > >>> > > Did you try both
> > > root=/dev/mapper/VolGroup01-LogVol00 and
> > > >>> > > root=/dev/VolGroup01/LogVol00
> arguments
> > for
> > > the dom0
> > > >>> kernel?
> > > >>> > >
> > > >>> > > How did you generate the initrd
> image
> > for the
> > > dom0 kernel?
> > > >>> > >
> > > >>> > > Anyway this sounds like a
> grub.conf or
> > initrd
> > > problem, not
> > > >>> Xen or
> > > >>> > pvops
> > > >>> > > dom0 kernel kernel problem.
> > > >>> > >
> > > >>> > > -- Pasi
> > > >>> > >
> > > >>> > > > Please let me know your
> thoughts.
> > > >>> > > >
> > > >>> > > > [root@localhost kishore]#
> df -h
> > > >>> > > >
> > > >>> > > > Filesystem Size Used Avail
> Use%
> > Mounted
> > > on
> > > >>> > > >
> > > >>> > > >
> /dev/mapper/VolGroup01-LogVol00
> > > >>> > > >
> > > >>> > > >
> > 223G
> > > 29G 182G 14%
> > > >>> /
> > > >>> > > >
> > > >>> > > > /dev/sda1 99M 81M 13M 87%
> /boot
> > > >>> > > >
> > > >>> > > > tmpfs 757M 0 757M 0%
> /dev/shm
> > > >>> > > >
> > > >>> > > > [root@localhost kishore]#
> cat
> > /etc/fstab
> > > >>> > > >
> > > >>> > > > /dev/VolGroup01/LogVol00 /
> ext3
> > defaults
> > > 1 1
> > > >>> > > >
> > > >>> > > > LABEL=/boot /boot ext3
> defaults 1
> > 2
> > > >>> > > >
> > > >>> > > > tmpfs /dev/shm tmpfs
> defaults 0 0
> > > >>> > > >
> > > >>> > > > devpts /dev/pts devpts
> > gid=5,mode=620 0
> > > 0
> > > >>> > > >
> > > >>> > > > sysfs /sys sysfs defaults
> 0 0
> > > >>> > > >
> > > >>> > > > proc /proc proc defaults 0
> 0
> > > >>> > > >
> > > >>> > > > /dev/VolGroup01/LogVol01
> swap
> > swap
> > > defaults 0 0
> > > >>> > > >
> > > >>> > > > [root@localhost kishore]#
> > > >>> > > >
> > > >>> > > > On Tue, Mar 16, 2010 at
> 4:18 PM,
> > Pasi
> > > Kärkkäinen
> > > >>> > >
> <[1][2][3][4][5][7][8]pasik@xxxxxx>
> > wrote:
> > > >>> > > >
> > > >>> > > > On Tue, Mar 16, 2010 at
> > 03:40:46PM
> > > -0700, kishore
> > > >>> kumar
> > > >>> > wrote:
> > > >>> > > > > I am not sure.
> Can you
> > please
> > > let me know how
> > > >>> to
> > > >>> > check
> > > >>> > > this? any
> > > >>> > > > command
> > > >>> > > > > ??
> > > >>> > > >
> > > >>> > > > well simple "df -h" will
> show
> > it. and
> > > also "cat
> > > >>> > /etc/fstab".
> > > >>> > > > You can also check it
> from your
> > grub
> > > >>> configuration.. from
> > > >>> > the
> > > >>> > > working
> > > >>> > > > baremetal (non-Xen)
> entry.
> > > >>> > > >
> > > >>> > > > -- Pasi
> > > >>> > > > >
> > > >>> > > > > On Tue, Mar 16,
> 2010 at
> > 3:29 PM,
> > > Pasi
> > > >>> Kärkkäinen
> > > >>> > > >
> > <[1][2][3][4][5][6][8][9]pasik@xxxxxx>
> > > wrote:
> > > >>> > > > >
> > > >>> > > > > On Tue, Mar 16,
> 2010 at
> > > 03:22:50PM -0700,
> > > >>> kishore
> > > >>> > kumar
> > > >>> > > wrote:
> > > >>> > > > > > attached
> is the
> > log
> > > captured in with
> > > >>> the word
> > > >>> > > document .
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > > > Scanning logical
> > volumes
> > > >>> > > > > Reading all
> physical
> > volumes.
> > > This may
> > > >>> take a
> > > >>> > while...
> > > >>> > > > > Activating
> logical
> > volumes
> > > >>> > > > > Volume group
> > "VolGroup01" not
> > > found
> > > >>> > > > > Trying to resume
> from
> > > >>> /dev/VolGroup01/LogVol01
> > > >>> > > > > Unable to access
> resume
> > device
> > > >>> > (/dev/VolGroup01/LogVol01)
> > > >>> > > > > Creating root
> device.
> > > >>> > > > > Mounting root
> > filesystem.
> > > >>> > > > > mount: could not
> find
> > > filesystem '/dev/root'
> > > >>> > > > > Setting up other
> > filesystems.
> > > >>> > > > > Setting up new
> root fs
> > > >>> > > > > setuproot:
> moving /dev
> > failed:
> > > No such file
> > > >>> or
> > > >>> > directory
> > > >>> > > > > no fstab.sys,
> mounting
> > > internal defaults
> > > >>> > > > > setuproot: error
> > mounting
> > > /proc: No such
> > > >>> file or
> > > >>> > directory
> > > >>> > > > > setuproot: error
> > mounting
> > > /sys: No such file
> > > >>> or
> > > >>> > directory
> > > >>> > > > > Switching to new
> root
> > and
> > > running init.
> > > >>> > > > > unmounting old
> /dev
> > > >>> > > > > unmounting old
> /proc
> > > >>> > > > > unmounting old
> /sys
> > > >>> > > > > switchroot:
> mount
> > failed: No
> > > such file or
> > > >>> directory
> > > >>> > > > > init used
> greatest
> > stack
> > > depth: 4088 bytes
> > > >>> left
> > > >>> > > > > Kernel panic -
> not
> > syncing:
> > > Attempted to
> > > >>> kill init!
> > > >>> > > > >
> > > >>> > > > > So it seems it
> gets all
> > the
> > > way to executing
> > > >>> the
> > > >>> > initrd
> > > >>> > > image,
> > > >>> > > > > which then fails
> to
> > mount the
> > > root fs.
> > > >>> > > > >
> > > >>> > > > > Earlier in the
> log:
> > > >>> > > > > ata1: SATA link
> up 3.0
> > Gbps
> > > (SStatus 123
> > > >>> SControl
> > > >>> > 300)
> > > >>> > > > > ata1.00: ATA-8:
> Hitachi
> > > HDT721025SLA380,
> > > >>> STBOA3AA,
> > > >>> > max
> > > >>> > > UDMA/133
> > > >>> > > > > ata1.00:
> 488397168
> > sectors,
> > > multi 0: LBA48
> > > >>> NCQ
> > > >>> > (depth
> > > >>> > > 31/32), AA
> > > >>> > > > > ata1.00:
> configured for
> > > UDMA/133
> > > >>> > > > > scsi 0:0:0:0:
> > Direct-Access
> > > ATA
> > > >>> Hitachi
> > > >>> > HDT72102
> > > >>> > > STBO
> > > >>> > > > PQ: 0
> > > >>> > > > > ANSI: 5
> > > >>> > > > > sd 0:0:0:0:
> Attached
> > scsi
> > > generic sg0 type 0
> > > >>> > > > > sd 0:0:0:0:
> [sda]
> > 488397168
> > > 512-byte logical
> > > >>> > blocks: (250
> > > >>> > > GB/232
> > > >>> > > > GiB)
> > > >>> > > > > sd 0:0:0:0:
> [sda] Write
> > > Protect is off
> > > >>> > > > > sd 0:0:0:0:
> [sda] Mode
> > Sense:
> > > 00 3a 00 00
> > > >>> > > > > sd 0:0:0:0:
> [sda] Write
> > cache:
> > > enabled, read
> > > >>> cache:
> > > >>> > > enabled,
> > > >>> > > > doesn't
> > > >>> > > > > support DPO or
> FUA
> > > >>> > > > > sda: sda1 sda2
> > > >>> > > > > sd 0:0:0:0:
> [sda]
> > Attached
> > > SCSI disk
> > > >>> > > > >
> > > >>> > > > > so /dev/sda was
> > detected. Is
> > > your root lvm
> > > >>> volume
> > > >>> > on
> > > >>> > > /dev/sda ?
> > > >>> > > > > Is
> > /dev/VolGroup01/LogVol01
> > > really your root
> > > >>> fs?
> > > >>> > > > >
> > > >>> > > > > -- Pasi
> > > >>> > > > >
> > > >>> > > > > >
> > > >>> > > > > >
> > > >>> > > > > > On Tue,
> Mar 16,
> > 2010 at
> > > 3:03 PM, Pasi
> > > >>> > Kärkkäinen
> > > >>> > > > >
> > > <[1][2][3][4][5][6][7][9][10]pasik@xxxxxx> wrote:
> > > >>> > > > > >
> > > >>> > > > > > On Tue,
> Mar 16,
> > 2010
> > > at 02:56:06PM
> > > >>> -0700,
> > > >>> > kishore
> > > >>> > > kumar
> > > >>> > > > wrote:
> > > >>> > > > > > >
> Please
> > find the
> > > attached log
> > > >>> file after
> > > >>> > fixing
> > > >>> > > the
> > > >>> > > > dom 0
> > > >>> > > > > kernel cmd
> > > >>> > > > > > line
> > > >>> > > > > > > as
> below
> > > >>> > > > > > >
> > > >>> > > > > > > ro
> > > root=/dev/VolGroup01/LogVol00
> > > >>> > console=hvc0
> > > >>> > > > > earlyprintk=xen
> > > >>> > > > > >
> nomodeset
> > > >>> > > > > > >
> > > >>> > > > > >
> > > >>> > > > > > There's
> > something
> > > wrong with the log,
> > > >>> the
> > > >>> > dom0
> > > >>> > > kernel
> > > >>> > > > parts are
> > > >>> > > > > all on
> > > >>> > > > > > one
> line..
> > > >>> > > > > > It's
> really
> > difficult
> > > to read it.
> > > >>> > > > > >
> > > >>> > > > > > -- Pasi
> > > >>> > > > > >
> > > >>> > > > > > >
> Thanks
> > > >>> > > > > > >
> > > >>> > > > > > >
> > > >>> > > > > > > On
> Tue,
> > Mar 16,
> > > 2010 at 2:29 PM,
> > > >>> Pasi
> > > >>> > > Kärkkäinen
> > > >>> > > > > >
> > > <[1][2][3][4][5][6][7][8][10][11]pasik@xxxxxx>
> > > >>> wrote:
> > > >>> > > > > > >
> > > >>> > > > > > >
> On Tue,
> > Mar
> > > 16, 2010 at
> > > >>> 02:16:22PM
> > > >>> > -0700,
> > > >>> > > kishore
> > > >>> > > > kumar
> > > >>> > > > > wrote:
> > > >>> > > > > > >
> > I
> > did
> > > below steps.
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > I
> > > pulled DOM 0 kernel
> > > >>> from
> > > >>> > > > > > >
> >
> > git
> > > clone
> > > >>> > > > > > >
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> git://[1][2][3][4][5][6][7][8][9][11][12]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > >>> > > > > > >
> >
> > > linux-2.6-xen
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > cd
> > > linux-2.6-xen
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > make
> > > clean
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > cp -a
> > > .config .config-old
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > wget -O
> > > .config
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> [2][3][4][5][6][7][8][9][10][12][13]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > make
> > > oldconfig
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > make
> > > bzImage
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > make
> > > modules
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > make
> > > modules_install
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > cp -a
> > > .config
> > > >>> > /boot/config-2.6.32.9
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > cp -a
> > > System.map
> > > >>> > > /boot/System.map-2.6.32.9
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > cp -a
> > > >>> arch/x86/boot/bzImage
> > > >>> > > > /boot/vmlinuz-2.6.32.9
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > and
> > > modified the
> > > >>> grub.conf as
> > > >>> > below
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > > Root(hd0,0)
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > kernel
> > > /xen.gz
> > > >>> console=vga,com1
> > > >>> > > > com1=115200,8n1
> > > >>> > > > > msi=1
> > > >>> > > > > > iommu=1
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > module
> > > /vmlinuz-2.6.32.9
> > > >>> ro
> > > >>> > > > >
> > root=/dev/VolGroup01/LogVo100
> > > >>> > > > > > rhgb
> > > >>> > > > > > >
> quiet
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > module
> > > >>> /initrd-2.6.32.9.img
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > and
> > > rebooted the machine.
> > > >>> Then
> > > >>> > It
> > > >>> > > booted with
> > > >>> > > > some
> > > >>> > > > > xen
> > > >>> > > > > > messages
> > > >>> > > > > > >
> and
> > > >>> > > > > > >
> >
> > stopped.
> > > Those were the
> > > >>> > messages
> > > >>> > > captured
> > > >>> > > > from
> > > >>> > > > > serial
> > > >>> > > > > > console.
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > Please
> > > let me know if I
> > > >>> did
> > > >>> > something
> > > >>> > > wrong
> > > >>> > > > here.
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> > > >>> > > > > > >
> Please
> > fix the
> > > kernel cmdline
> > > >>> based
> > > >>> > on my
> > > >>> > > earlier
> > > >>> > > > email,
> > > >>> > > > > and
> > > >>> > > > > > capture
> and
> > > >>> > > > > > >
> post
> > the
> > > >>> > > > > > >
> serial
> > console
> > > log again!
> > > >>> > > > > > >
> > > >>> > > > > > >
> -- Pasi
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > On Tue,
> > > Mar 16, 2010 at
> > > >>> 1:20 PM,
> > > >>> > Pasi
> > > >>> > > > Kärkkäinen
> > > >>> > > > > > >
> > > >>>
> <[3][4][5][6][7][8][9][10][11][13][14]pasik@xxxxxx>
> > > >>> > wrote:
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > On
> > > Tue, Mar 16, 2010 at
> > > >>> > 01:16:28PM
> > > >>> > > -0700,
> > > >>> > > > Jeremy
> > > >>> > > > > >
> Fitzhardinge
> > > >>> > > > > > >
> wrote:
> > > >>> > > > > > >
> >
> > > On
> > > 03/16/2010 12:48
> > > >>> PM, Pasi
> > > >>> > > Kärkkäinen
> > > >>> > > > wrote:
> > > >>> > > > > > >
> >
> > >> On
> > > Tue, Mar 16, 2010
> > > >>> at
> > > >>> > 09:43:44PM
> > > >>> > > +0200,
> > > >>> > > > Pasi
> > > >>> > > > > >
> Kärkkäinen
> > > >>> > > > > > >
> wrote:
> > > >>> > > > > > >
> >
> > >>
> > > >>> > > > > > >
> >
> > >>>
> > > On Tue, Mar 16,
> > > >>> 2010 at
> > > >>> > > 10:32:17AM
> > > >>> > > > -0700,
> > > >>> > > > > kishore
> > > >>> > > > > > kumar
> > > >>> > > > > > >
> wrote:
> > > >>> > > > > > >
> >
> > >>>
> > > >>> > > > > > >
> >
> > >>>>
> > > Attached is
> > > >>> the
> > > >>> > output
> > > >>> > > captured
> > > >>> > > > from
> > > >>> > > > > serial
> > > >>> > > > > > console.
> > > >>> > > > > > >
> >
> > >>>>
> > > >>> > > > > > >
> >
> > >>>>
> > > Machine does
> > > >>> not boot
> > > >>> > after
> > > >>> > > > compiling xen
> > > >>> > > > > 3.4.3
> > > >>> > > > > > with
> > > >>> > > > > > >
> pv_ops
> > dom
> > > >>> > > > > > >
> >
> > 0
> > > kernel.
> > > >>> > > > > > >
> >
> > >>>>
> > > >>> > > > > > >
> >
> > >>>>
> > > Please let me
> > > >>> know
> > > >>> > what is
> > > >>> > > going
> > > >>> > > > wrong
> > > >>> > > > > here.
> > > >>> > > > > > >
> >
> > >>>>
> > > >>> > > > > > >
> >
> > >>>>
> > > >>> > > > > > >
> >
> > >>>
> > > Ok this looks like
> > > >>> a bug
> > > >>> > that is
> > > >>> > > already
> > > >>> > > > being
> > > >>> > > > > sorted
> > > >>> > > > > > out on
> > > >>> > > > > > >
> >
> > > xen-devel mailinglist.
> > > >>> > > > > > >
> >
> > >>> I
> > > added CC to
> > > >>> xen-devel.
> > > >>> > > > > > >
> >
> > >>>
> > > >>> > > > > > >
> >
> > >>>
> > > >>> > > > > > >
> >
> > >>
> > > >>> > > > > > >
> >
> > >
> > > >>> > > > > > >
> >
> > >
> > > Those messages are
> > > >>> not a
> > > >>> > problem in
> > > >>> > > > themselves,
> > > >>> > > > > but the
> > > >>> > > > > > related
> > > >>> > > > > > >
> >
> > > problem
> > > >>> > > > > > >
> >
> > > is
> > > believed to be
> > > >>> fixed in
> > > >>> > current
> > > >>> > > > >
> xen/stable-2.6.32.x.
> > > >>> > > > > > It
> > > >>> > > > > > >
> looks
> > like
> > > >>> > > > > > >
> >
> > > the
> > > output stops
> > > >>> there
> > > >>> > because the
> > > >>> > > Xen
> > > >>> > > > console
> > > >>> > > > > isn't set
> > > >>> > > > > > up
> > > >>> > > > > > >
> > properly
> > > >>> > > > > > >
> >
> > for
> > > >>> > > > > > >
> >
> > >
> > > some reason.
> > > >>> > > > > > >
> >
> > >
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > Yeah,
> > > remove "rhgb
> > > >>> quiet" from
> > > >>> > the
> > > >>> > > options..
> > > >>> > > > the
> > > >>> > > > > dom0
> > > >>> > > > > > kernel
> > > >>> > > > > > >
> cmdline
> > > >>> > > > > > >
> >
> > should
> > > be like this:
> > > >>> > > > > > >
> >
> > ro
> > > >>> > root=/dev/VolGroup01/LogVol00
> > > >>> > > > console=hvc0
> > > >>> > > > > >
> earlyprintk=xen
> > > >>> > > > > > >
> > nomodeset
> > > >>> > > > > > >
> >
> > --
> > > Pasi
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > References
> > > >>> > > > > > >
> >
> > > >>> > > > > > >
> >
> > Visible
> > > links
> > > >>> > > > > > >
> >
> > 1.
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> [5][6][7][8][9][10][11][12][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > >>> > > > > > >
> >
> > 2.
> > > >>> > > > > > >
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> [6][7][8][9][10][11][12][13][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > >>> > > > > > >
> >
> > 3.
> > > >>> >
> > mailto:[7][8][9][10][11][12][13][14][16][17]pasik@xxxxxx
> > > >>> > > > > > >
> > > >>> > > > > > >
> References
> > > >>> > > > > > >
> > > >>> > > > > > >
> Visible
> > links
> > > >>> > > > > > > 1.
> > > >>> >
> > mailto:[9][10][11][12][13][14][15][17][18]pasik@xxxxxx
> > > >>> > > > > > > 2.
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> [10][11][12][13][14][15][16][18][19]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > >>> > > > > > > 3.
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> [11][12][13][14][15][16][17][19][20]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > >>> > > > > > > 4.
> > > >>> >
> > mailto:[12][13][14][15][16][17][18][20][21]pasik@xxxxxx
> > > >>> > > > > > > 5.
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> [13][14][15][16][17][18][19][21][22]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > >>> > > > > > > 6.
> > > >>> > > > > >
> > > >>> > > > >
> > > >>> > > >
> > > >>> > >
> > > >>> >
> > > >>>
> > >
> >
>
> [14][15][16][17][18][19][20][22][23]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > >>> > > > > > > 7.
> > > >>> >
> > mailto:[15][16][17][18][19][20][21][23][24]pasik@xxxxxx
> > > >>> > > > > > >
> Asserting
> > Post
> > > complete GPIO!!!
> > > >>> > > > > > >
> Transfer
> > control to
> > > CSM 16-bit
> > > >>> binary for
> > > >>> > legacy
> > > >>> > > boot
> > > >>> > > > > > > __
> __
> > > _____ _ _
> > > >>> _____
> > > >>> > > _ _
> > > >>> > > > > > > \ \/
> /___ _
> > __
> > > |___ /| || |
> > > >>> |___ /
> > > >>> > _ __
> > > >>> > > ___| || |
> > > >>> > > > _
> > > >>> > > > > __ _
> > > >>> > > > > > __ ___
> > > >>> > > > > > > \
> // _ \
> > '_ \
> > > |_ \| || |_
> > > >>> |_ \ __|
> > > >>> > '__/
> > > >>> > > __| ||
> > > >>> > > > |_ __|
> > > >>> > > > > '_ \|
> > > >>> > > > > > '__/ _ \
> > > >>> > > > > > > /
> \ __/
> > | | |
> > > ___) |__ _|
> > > >>> ___) |__|
> > > >>> > | |
> > > >>> > > (__|__
> > > >>> > > > _|__|
> > > >>> > > > > |_) | |
> > > >>> > > > > > | __/
> > > >>> > > > > > >
> > /_/\_\___|_| |_|
> > > |____(_)
> > > >>> |_|(_)____/
> > > >>> > |_|
> > > >>> > > \___| |_|
> > > >>> > > > |
> > > >>> > > > > .__/|_|
> > > >>> > > > > > \___|
> > > >>> > > > > > >
> > > >>> > > > |_|
> > > >>> > > > > > > (XEN)
> Xen
> > version
> > > 3.4.3-rc4-pre
> > > >>> > > (kishore@localdomain)
> > > >>> > > > (gcc
> > > >>> > > > > version
> > > >>> > > > > > 4.1.2
> 20080704
> > (Red
> > > Hat 4.1.2-46))
> > > >>> Mon Mar
> > > >>> > 15
> > > >>> > > 13:44:31 PDT
> > > >>> > > > 2010
> > > >>> > > > > > > (XEN)
> Latest
> > > ChangeSet: Tue Mar 09
> > > >>> > 18:15:52 2010
> > > >>> > > +0000
> > > >>> > > > > >
> > 19924:6e72f8c3c017
> > > >>> > > > > > > (XEN)
> > Command line:
> > > >>> console=vga,com1
> > > >>> > > com1=115200,8n1
> > > >>> > > > msi=1
> > > >>> > > > > iommu=1
> > > >>> > > > > > > (XEN)
> Video
> > > information:
> > > >>> > > > > > > (XEN)
> VGA
> > is text
> > > mode 80x25, font
> > > >>> 8x16
> > > >>> > > > > > > (XEN)
> > VBE/DDC
> > > methods: none; EDID
> > > >>> > transfer time:
> > > >>> > > 0
> > > >>> > > > seconds
> > > >>> > > > > > > (XEN)
> EDID
> > info
> > > not retrieved
> > > >>> because no
> > > >>> > DDC
> > > >>> > > retrieval
> > > >>> > > > method
> > > >>> > > > > > detected
> > > >>> > > > > > > (XEN)
> Disc
> > > information:
> > > >>> > > > > > > (XEN)
> Found
> > 1 MBR
> > > signatures
> > > >>> > > > > > > (XEN)
> Found
> > 1 EDD
> > > information
> > > >>> structures
> > > >>> > > > > > > (XEN)
> > Xen-e820 RAM
> > > map:
> > > >>> > > > > > > (XEN)
> > > 0000000000000000 -
> > > >>> 000000000009d000
> > > >>> > > (usable)
> > > >>> > > > > > > (XEN)
> > > 000000000009d000 -
> > > >>> 00000000000a0000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 00000000000e0000 -
> > > >>> 0000000000100000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 0000000000100000 -
> > > >>> 000000006d597000
> > > >>> > > (usable)
> > > >>> > > > > > > (XEN)
> > > 000000006d597000 -
> > > >>> 000000006d686000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 000000006d686000 -
> > > >>> 000000006f598000
> > > >>> > > (usable)
> > > >>> > > > > > > (XEN)
> > > 000000006f598000 -
> > > >>> 000000006f59a000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 000000006f59a000 -
> > > >>> 000000006f5af000
> > > >>> > (ACPI
> > > >>> > > NVS)
> > > >>> > > > > > > (XEN)
> > > 000000006f5af000 -
> > > >>> 000000006f5d9000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 000000006f5d9000 -
> > > >>> 000000006f5f9000
> > > >>> > (ACPI
> > > >>> > > data)
> > > >>> > > > > > > (XEN)
> > > 000000006f5f9000 -
> > > >>> 000000006f6df000
> > > >>> > (ACPI
> > > >>> > > NVS)
> > > >>> > > > > > > (XEN)
> > > 000000006f6df000 -
> > > >>> 000000006f700000
> > > >>> > (ACPI
> > > >>> > > data)
> > > >>> > > > > > > (XEN)
> > > 000000006f700000 -
> > > >>> 0000000080000000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 00000000a0000000 -
> > > >>> 00000000b0000000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 00000000fc000000 -
> > > >>> 00000000fd000000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 00000000fed1c000 -
> > > >>> 00000000fed20000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> > > 00000000ffc00000 -
> > > >>> 0000000100000000
> > > >>> > > (reserved)
> > > >>> > > > > > > (XEN)
> System
> > RAM:
> > > 1780MB
> > > >>> (1823000kB)
> > > >>> > > > > > > (XEN)
> ACPI:
> > RSDP
> > > 000F03F0, 0024 (r2
> > > >>> INTEL
> > > >>> > )
> > > >>> > > > > > > (XEN)
> ACPI:
> > XSDT
> > > 6F6FE120, 0064 (r1
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 0
> > > >>> > > > > > 1000013)
> > > >>> > > > > > > (XEN)
> ACPI:
> > FACP
> > > 6F6FD000, 00F4 (r4
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 0
> > > >>> > > > > MSFT
> > > >>> > > > > >
> 100000D)
> > > >>> > > > > > > (XEN)
> ACPI:
> > DSDT
> > > 6F6F5000, 74F1 (r2
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 3
> > > >>> > > > > MSFT
> > > >>> > > > > >
> 100000D)
> > > >>> > > > > > > (XEN)
> ACPI:
> > FACS
> > > 6F5F9000, 0040
> > > >>> > > > > > > (XEN)
> ACPI:
> > APIC
> > > 6F6F4000, 01CC (r2
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 0
> > > >>> > > > > MSFT
> > > >>> > > > > >
> 100000D)
> > > >>> > > > > > > (XEN)
> ACPI:
> > MCFG
> > > 6F6F3000, 003C (r1
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 1
> > > >>> > > > > MSFT
> > > >>> > > > > >
> 100000D)
> > > >>> > > > > > > (XEN)
> ACPI:
> > HPET
> > > 6F6F2000, 0038 (r1
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 1
> > > >>> > > > > MSFT
> > > >>> > > > > >
> 100000D)
> > > >>> > > > > > > (XEN)
> ACPI:
> > SLIT
> > > 6F6F1000, 0030 (r1
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 1
> > > >>> > > > > MSFT
> > > >>> > > > > >
> 100000D)
> > > >>> > > > > > > (XEN)
> ACPI:
> > WDDT
> > > 6F6F0000, 0040 (r1
> > > >>> INTEL
> > > >>> > THRLY
> > > >>> > > > 0
> > > >>> > > > > MSFT
> > > >>> > > > > >
> 100000D)
> > > >>> > > > > > > (XEN)
> ACPI:
> > SSDT
> > > 6F5D9000, 1FDDC
> > > >>> (r1
> > > >>> > INTEL SSDT
> > > >>> > > PM
> > > >>> > > > 4000
> > > >>> > > > > INTL
> > > >>> > > > > >
> 20061109)
> > > >>> > > > > > > (XEN)
> ACPI:
> > DMAR
> > > 6F6EE000, 01D0 (r1
> > > >>> INTEL
> >
>
> References
>
> Visible links
> 1. mailto:pasik@xxxxxx
> 2. mailto:pasik@xxxxxx
> 3. http://wiki.xensource.com/xenwiki/XenParavirtOps
> 4. mailto:pasik@xxxxxx
> 5. mailto:pasik@xxxxxx
> 6. mailto:pasik@xxxxxx
> 7. mailto:pasik@xxxxxx
> 8. mailto:pasik@xxxxxx
> 9. mailto:pasik@xxxxxx
> 10. mailto:pasik@xxxxxx
> 11. mailto:pasik@xxxxxx
> 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 13.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 14. mailto:pasik@xxxxxx
> 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 16.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 17. mailto:pasik@xxxxxx
> 18. mailto:pasik@xxxxxx
> 19. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 20.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 21. mailto:pasik@xxxxxx
> 22. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 23.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 24. mailto:pasik@xxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|