|
xen-devel
Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_IC
On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote:
On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote:
Attached is the capture log after changing the grub.conf to
ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset
initcall_debug debug swiotlb=force apic=debug loglevel=10
for the dom 0 kernel command line.
Hmm, interesting. Now it seems to crash in a different place.
Jeremy: Have you seen this one earlier?
No, but it looks like the result of "apic=debug" on the kernel command
line. That won't do anything useful (the kernel has no APICs, they all
belong to Xen), and can only cause harm. As it appears to have done.
J
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 0 0 0 0 0 0 0 00
IRQ to pin mappings:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
PGD 0
Oops: 0000 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32.10 #2
RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
RSP: e02b:ffff880064edbe20 EFLAGS: 00010286
RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01
RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000
RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000)
Stack:
ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8
<0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002
<0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332
Call Trace:
[<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
[<ffffffff810846f0>] ? ktime_get+0x78/0x93
[<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
[<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
[<ffffffff819ae961>] kernel_init+0x172/0x1cc
[<ffffffff81013eaa>] child_rip+0xa/0x20
[<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
[<ffffffff81013810>] ? restore_args+0x0/0x30
[<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
[<ffffffff81013ea0>] ? child_rip+0x0/0x20
Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 69 ff 31
ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48> 83 3b 00 74 40 44 89 e6
48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4
RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
RSP<ffff880064edbe20>
CR2: 0000000000000000
---[ end trace 0007ad9d59420718 ]---
swapper used greatest stack depth: 4168 bytes left
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2
Call Trace:
[<ffffffff8105b747>] panic+0xa5/0x167
[<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
[<ffffffff8105f2b3>] ? do_exit+0x38a/0x701
[<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff8108f823>] ? lock_release+0x179/0x184
[<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
[<ffffffff8105efa7>] do_exit+0x7e/0x701
[<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
[<ffffffff8147764c>] oops_end+0xbf/0xc7
[<ffffffff81038a02>] no_context+0x1f1/0x200
[<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
[<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4
[<ffffffff8100f452>] ? check_events+0x12/0x20
[<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15
[<ffffffff81478b20>] do_page_fault+0x16d/0x2a2
[<ffffffff814769d5>] page_fault+0x25/0x30
[<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500
[<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
[<ffffffff810846f0>] ? ktime_get+0x78/0x93
[<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
[<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
[<ffffffff819ae961>] kernel_init+0x172/0x1cc
[<ffffffff81013eaa>] child_rip+0xa/0x20
[<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
[<ffffffff81013810>] ? restore_args+0x0/0x30
[<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
[<ffffffff81013ea0>] ? child_rip+0x0/0x20
-- Pasi
On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@xxxxxx> wrote:
On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote:
> pvdisplay does not work in my RHEL machine.
>
> I did pvscan.
> below is the output.
>
> PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free]
>
> Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ]
>
Ok so /dev/sda2 is the correct device holding the VolGroup01.
Looking at your latest capture.doc I see this:
Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen
nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10
So your root= parameter is wrong! Edit grub.conf and replace it with the
actual root device:
root=/dev/VolGroup01/LogVol00
-- Pasi
> On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen
<[1][2]pasik@xxxxxx> wrote:
>
> On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote:
> > I did the below steps for pvops dom 0 kernel.
> >
> > make menuconfig
> > make bzImage
> > make modules
> > make modules_install
> > cp -a .config /boot/config-2.6.32.10
> > cp -a System.map /boot/System.map-2.6.32.10
> > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10
> > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img
> 2.6.32.10
> > I tried root=/dev/VolGroup01/LogVol00 .
> >
>
> Ok.
>
> Please run "pvdisplay" to see which actual partition is the LVM
PV for
> your
> volume group.
>
> Also if you're running Fedora 12 you could try generating an
initrd
> image
> with dracut instead of mkinitrd.
>
> -- Pasi
>
> >
> > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen
> <[1][2][3]pasik@xxxxxx> wrote:
> >
> > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar
wrote:
> > > Here is the output of df -h and cat /etc/fstab of my
> machine.
> > >
> >
> > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and
> > root=/dev/VolGroup01/LogVol00 arguments for the dom0
kernel?
> >
> > How did you generate the initrd image for the dom0 kernel?
> >
> > Anyway this sounds like a grub.conf or initrd problem, not
Xen or
> pvops
> > dom0 kernel kernel problem.
> >
> > -- Pasi
> >
> > > Please let me know your thoughts.
> > >
> > > [root@localhost kishore]# df -h
> > >
> > > Filesystem Size Used Avail Use% Mounted on
> > >
> > > /dev/mapper/VolGroup01-LogVol00
> > >
> > > 223G 29G 182G
14%
/
> > >
> > > /dev/sda1 99M 81M 13M 87% /boot
> > >
> > > tmpfs 757M 0 757M 0% /dev/shm
> > >
> > > [root@localhost kishore]# cat /etc/fstab
> > >
> > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
> > >
> > > LABEL=/boot /boot ext3 defaults 1 2
> > >
> > > tmpfs /dev/shm tmpfs defaults 0 0
> > >
> > > devpts /dev/pts devpts gid=5,mode=620 0 0
> > >
> > > sysfs /sys sysfs defaults 0 0
> > >
> > > proc /proc proc defaults 0 0
> > >
> > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0
> > >
> > > [root@localhost kishore]#
> > >
> > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen
> > <[1][2][3][4]pasik@xxxxxx> wrote:
> > >
> > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore
kumar
> wrote:
> > > > I am not sure. Can you please let me know
how
to
> check
> > this? any
> > > command
> > > > ??
> > >
> > > well simple "df -h" will show it. and also "cat
> /etc/fstab".
> > > You can also check it from your grub
configuration.. from
> the
> > working
> > > baremetal (non-Xen) entry.
> > >
> > > -- Pasi
> > > >
> > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi
Kärkkäinen
> > > <[1][2][3][4][5]pasik@xxxxxx> wrote:
> > > >
> > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700,
kishore
> kumar
> > wrote:
> > > > > attached is the log captured in
with
the word
> > document .
> > > > >
> > > >
> > > > Scanning logical volumes
> > > > Reading all physical volumes. This may
take a
> while...
> > > > Activating logical volumes
> > > > Volume group "VolGroup01" not found
> > > > Trying to resume from
/dev/VolGroup01/LogVol01
> > > > Unable to access resume device
> (/dev/VolGroup01/LogVol01)
> > > > Creating root device.
> > > > Mounting root filesystem.
> > > > mount: could not find filesystem
'/dev/root'
> > > > Setting up other filesystems.
> > > > Setting up new root fs
> > > > setuproot: moving /dev failed: No such
file
or
> directory
> > > > no fstab.sys, mounting internal defaults
> > > > setuproot: error mounting /proc: No such
file or
> directory
> > > > setuproot: error mounting /sys: No such
file
or
> directory
> > > > Switching to new root and running init.
> > > > unmounting old /dev
> > > > unmounting old /proc
> > > > unmounting old /sys
> > > > switchroot: mount failed: No such file or
directory
> > > > init used greatest stack depth: 4088 bytes
left
> > > > Kernel panic - not syncing: Attempted to
kill init!
> > > >
> > > > So it seems it gets all the way to
executing
the
> initrd
> > image,
> > > > which then fails to mount the root fs.
> > > >
> > > > Earlier in the log:
> > > > ata1: SATA link up 3.0 Gbps (SStatus 123
SControl
> 300)
> > > > ata1.00: ATA-8: Hitachi HDT721025SLA380,
STBOA3AA,
> max
> > UDMA/133
> > > > ata1.00: 488397168 sectors, multi 0: LBA48
NCQ
> (depth
> > 31/32), AA
> > > > ata1.00: configured for UDMA/133
> > > > scsi 0:0:0:0: Direct-Access ATA
Hitachi
> HDT72102
> > STBO
> > > PQ: 0
> > > > ANSI: 5
> > > > sd 0:0:0:0: Attached scsi generic sg0
type 0
> > > > sd 0:0:0:0: [sda] 488397168 512-byte
logical
> blocks: (250
> > GB/232
> > > GiB)
> > > > sd 0:0:0:0: [sda] Write Protect is off
> > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > > > sd 0:0:0:0: [sda] Write cache: enabled,
read
cache:
> > enabled,
> > > doesn't
> > > > support DPO or FUA
> > > > sda: sda1 sda2
> > > > sd 0:0:0:0: [sda] Attached SCSI disk
> > > >
> > > > so /dev/sda was detected. Is your root lvm
volume
> on
> > /dev/sda ?
> > > > Is /dev/VolGroup01/LogVol01 really your
root
fs?
> > > >
> > > > -- Pasi
> > > >
> > > > >
> > > > >
> > > > > On Tue, Mar 16, 2010 at 3:03 PM,
Pasi
> Kärkkäinen
> > > > <[1][2][3][4][5][6]pasik@xxxxxx> wrote:
> > > > >
> > > > > On Tue, Mar 16, 2010 at 02:56:06PM
-0700,
> kishore
> > kumar
> > > wrote:
> > > > > > Please find the attached log
file after
> fixing
> > the
> > > dom 0
> > > > kernel cmd
> > > > > line
> > > > > > as below
> > > > > >
> > > > > > ro
root=/dev/VolGroup01/LogVol00
> console=hvc0
> > > > earlyprintk=xen
> > > > > nomodeset
> > > > > >
> > > > >
> > > > > There's something wrong with the
log,
the
> dom0
> > kernel
> > > parts are
> > > > all on
> > > > > one line..
> > > > > It's really difficult to read it.
> > > > >
> > > > > -- Pasi
> > > > >
> > > > > > Thanks
> > > > > >
> > > > > >
> > > > > > On Tue, Mar 16, 2010 at
2:29 PM,
Pasi
> > Kärkkäinen
> > > > >
<[1][2][3][4][5][6][7]pasik@xxxxxx>
wrote:
> > > > > >
> > > > > > On Tue, Mar 16, 2010 at
02:16:22PM
> -0700,
> > kishore
> > > kumar
> > > > wrote:
> > > > > > > I did below steps.
> > > > > > >
> > > > > > >
> > > > > > > I pulled DOM 0
kernel
from
> > > > > > > git clone
> > > > > >
> > > > >
> > > >
> > >
> >
>
git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > linux-2.6-xen
> > > > > > >
> > > > > > > cd linux-2.6-xen
> > > > > > >
> > > > > > > make clean
> > > > > > >
> > > > > > > cp -a .config
.config-old
> > > > > > >
> > > > > > > wget -O .config
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
[2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > >
> > > > > > > make oldconfig
> > > > > > >
> > > > > > > make bzImage
> > > > > > >
> > > > > > > make modules
> > > > > > >
> > > > > > > make modules_install
> > > > > > >
> > > > > > > cp -a .config
> /boot/config-2.6.32.9
> > > > > > >
> > > > > > > cp -a System.map
> > /boot/System.map-2.6.32.9
> > > > > > >
> > > > > > > cp -a
arch/x86/boot/bzImage
> > > /boot/vmlinuz-2.6.32.9
> > > > > > >
> > > > > > > and modified the
grub.conf as
> below
> > > > > > >
> > > > > > >
> > > > > > > Root(hd0,0)
> > > > > > >
> > > > > > > kernel /xen.gz
console=vga,com1
> > > com1=115200,8n1
> > > > msi=1
> > > > > iommu=1
> > > > > > >
> > > > > > > module
/vmlinuz-2.6.32.9
ro
> > > > root=/dev/VolGroup01/LogVo100
> > > > > rhgb
> > > > > > quiet
> > > > > > >
> > > > > > > module
/initrd-2.6.32.9.img
> > > > > > >
> > > > > > >
> > > > > > > and rebooted the
machine.
Then
> It
> > booted with
> > > some
> > > > xen
> > > > > messages
> > > > > > and
> > > > > > > stopped. Those
were the
> messages
> > captured
> > > from
> > > > serial
> > > > > console.
> > > > > > >
> > > > > > > Please let me know
if I
did
> something
> > wrong
> > > here.
> > > > > > >
> > > > > >
> > > > > > Please fix the kernel
cmdline
based
> on my
> > earlier
> > > email,
> > > > and
> > > > > capture and
> > > > > > post the
> > > > > > serial console log again!
> > > > > >
> > > > > > -- Pasi
> > > > > > >
> > > > > > >
> > > > > > > On Tue, Mar 16,
2010 at
1:20 PM,
> Pasi
> > > Kärkkäinen
> > > > > >
<[3][4][5][6][7][8][9][10]pasik@xxxxxx>
> wrote:
> > > > > > >
> > > > > > > On Tue, Mar 16,
2010 at
> 01:16:28PM
> > -0700,
> > > Jeremy
> > > > > Fitzhardinge
> > > > > > wrote:
> > > > > > > > On 03/16/2010
12:48
PM, Pasi
> > Kärkkäinen
> > > wrote:
> > > > > > > >> On Tue, Mar
16, 2010
at
> 09:43:44PM
> > +0200,
> > > Pasi
> > > > > Kärkkäinen
> > > > > > wrote:
> > > > > > > >>
> > > > > > > >>> On Tue, Mar
16,
2010 at
> > 10:32:17AM
> > > -0700,
> > > > kishore
> > > > > kumar
> > > > > > wrote:
> > > > > > > >>>
> > > > > > > >>>>
Attached is
the
> output
> > captured
> > > from
> > > > serial
> > > > > console.
> > > > > > > >>>>
> > > > > > > >>>> Machine
does
not boot
> after
> > > compiling xen
> > > > 3.4.3
> > > > > with
> > > > > > pv_ops dom
> > > > > > > 0 kernel.
> > > > > > > >>>>
> > > > > > > >>>> Please
let me
know
> what is
> > going
> > > wrong
> > > > here.
> > > > > > > >>>>
> > > > > > > >>>>
> > > > > > > >>> Ok this
looks like
a bug
> that is
> > already
> > > being
> > > > sorted
> > > > > out on
> > > > > > > xen-devel
mailinglist.
> > > > > > > >>> I added CC to
xen-devel.
> > > > > > > >>>
> > > > > > > >>>
> > > > > > > >>
> > > > > > > >
> > > > > > > > Those messages
are
not a
> problem in
> > > themselves,
> > > > but the
> > > > > related
> > > > > > > problem
> > > > > > > > is believed to
be
fixed in
> current
> > > > xen/stable-2.6.32.x.
> > > > > It
> > > > > > looks like
> > > > > > > > the output
stops
there
> because the
> > Xen
> > > console
> > > > isn't set
> > > > > up
> > > > > > properly
> > > > > > > for
> > > > > > > > some reason.
> > > > > > > >
> > > > > > >
> > > > > > > Yeah, remove "rhgb
quiet" from
> the
> > options..
> > > the
> > > > dom0
> > > > > kernel
> > > > > > cmdline
> > > > > > > should be like
this:
> > > > > > > ro
> root=/dev/VolGroup01/LogVol00
> > > console=hvc0
> > > > > earlyprintk=xen
> > > > > > nomodeset
> > > > > > > -- Pasi
> > > > > > >
> > > > > > > References
> > > > > > >
> > > > > > > Visible links
> > > > > > > 1.
> > > > >
> > > >
> > >
> >
>
[5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > > 2.
> > > > > >
> > > > >
> > > >
> > >
> >
>
[6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > > 3.
> mailto:[7][8][9][10][11][12][13]pasik@xxxxxx
> > > > > >
> > > > > > References
> > > > > >
> > > > > > Visible links
> > > > > > 1.
> mailto:[9][10][11][12][13][14]pasik@xxxxxx
> > > > > > 2.
> > > > >
> > > >
> > >
> >
>
[10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 3.
> > > > >
> > > >
> > >
> >
>
[11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > 4.
> mailto:[12][13][14][15][16][17]pasik@xxxxxx
> > > > > > 5.
> > > > >
> > > >
> > >
> >
>
[13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > > > > > 6.
> > > > >
> > > >
> > >
> >
>
[14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > > > > > 7.
> mailto:[15][16][17][18][19][20]pasik@xxxxxx
> > > > > > Asserting Post complete GPIO!!!
> > > > > > Transfer control to CSM 16-bit
binary for
> legacy
> > boot
> > > > > > __ __ _____ _ _
_____
> > _ _
> > > > > > \ \/ /___ _ __ |___ /| || |
|___ /
> _ __
> > ___| || |
> > > _
> > > > __ _
> > > > > __ ___
> > > > > > \ // _ \ '_ \ |_ \| || |_
|_ \ __|
> '__/
> > __| ||
> > > |_ __|
> > > > '_ \|
> > > > > '__/ _ \
> > > > > > / \ __/ | | | ___) |__
_|
___) |__|
> | |
> > (__|__
> > > _|__|
> > > > |_) | |
> > > > > | __/
> > > > > > /_/\_\___|_| |_| |____(_)
|_|(_)____/
> |_|
> > \___| |_|
> > > |
> > > > .__/|_|
> > > > > \___|
> > > > > >
> > > |_|
> > > > > > (XEN) Xen version 3.4.3-rc4-pre
> > (kishore@localdomain)
> > > (gcc
> > > > version
> > > > > 4.1.2 20080704 (Red Hat 4.1.2-46))
Mon Mar
> 15
> > 13:44:31 PDT
> > > 2010
> > > > > > (XEN) Latest ChangeSet: Tue
Mar 09
> 18:15:52 2010
> > +0000
> > > > > 19924:6e72f8c3c017
> > > > > > (XEN) Command line:
console=vga,com1
> > com1=115200,8n1
> > > msi=1
> > > > iommu=1
> > > > > > (XEN) Video information:
> > > > > > (XEN) VGA is text mode 80x25,
font
8x16
> > > > > > (XEN) VBE/DDC methods: none;
EDID
> transfer time:
> > 0
> > > seconds
> > > > > > (XEN) EDID info not retrieved
because no
> DDC
> > retrieval
> > > method
> > > > > detected
> > > > > > (XEN) Disc information:
> > > > > > (XEN) Found 1 MBR signatures
> > > > > > (XEN) Found 1 EDD information
structures
> > > > > > (XEN) Xen-e820 RAM map:
> > > > > > (XEN) 0000000000000000 -
000000000009d000
> > (usable)
> > > > > > (XEN) 000000000009d000 -
00000000000a0000
> > (reserved)
> > > > > > (XEN) 00000000000e0000 -
0000000000100000
> > (reserved)
> > > > > > (XEN) 0000000000100000 -
000000006d597000
> > (usable)
> > > > > > (XEN) 000000006d597000 -
000000006d686000
> > (reserved)
> > > > > > (XEN) 000000006d686000 -
000000006f598000
> > (usable)
> > > > > > (XEN) 000000006f598000 -
000000006f59a000
> > (reserved)
> > > > > > (XEN) 000000006f59a000 -
000000006f5af000
> (ACPI
> > NVS)
> > > > > > (XEN) 000000006f5af000 -
000000006f5d9000
> > (reserved)
> > > > > > (XEN) 000000006f5d9000 -
000000006f5f9000
> (ACPI
> > data)
> > > > > > (XEN) 000000006f5f9000 -
000000006f6df000
> (ACPI
> > NVS)
> > > > > > (XEN) 000000006f6df000 -
000000006f700000
> (ACPI
> > data)
> > > > > > (XEN) 000000006f700000 -
0000000080000000
> > (reserved)
> > > > > > (XEN) 00000000a0000000 -
00000000b0000000
> > (reserved)
> > > > > > (XEN) 00000000fc000000 -
00000000fd000000
> > (reserved)
> > > > > > (XEN) 00000000fed1c000 -
00000000fed20000
> > (reserved)
> > > > > > (XEN) 00000000ffc00000 -
0000000100000000
> > (reserved)
> > > > > > (XEN) System RAM: 1780MB
(1823000kB)
> > > > > > (XEN) ACPI: RSDP 000F03F0,
0024 (r2
INTEL
> )
> > > > > > (XEN) ACPI: XSDT 6F6FE120,
0064 (r1
INTEL
> THRLY
> > > 0
> > > > > 1000013)
> > > > > > (XEN) ACPI: FACP 6F6FD000,
00F4 (r4
INTEL
> THRLY
> > > 0
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: DSDT 6F6F5000,
74F1 (r2
INTEL
> THRLY
> > > 3
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: FACS 6F5F9000, 0040
> > > > > > (XEN) ACPI: APIC 6F6F4000,
01CC (r2
INTEL
> THRLY
> > > 0
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: MCFG 6F6F3000,
003C (r1
INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: HPET 6F6F2000,
0038 (r1
INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: SLIT 6F6F1000,
0030 (r1
INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: WDDT 6F6F0000,
0040 (r1
INTEL
> THRLY
> > > 0
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) ACPI: SSDT 6F5D9000,
1FDDC
(r1
> INTEL SSDT
> > PM
> > > 4000
> > > > INTL
> > > > > 20061109)
> > > > > > (XEN) ACPI: DMAR 6F6EE000,
01D0 (r1
INTEL
> THRLY
> > > 1
> > > > MSFT
> > > > > 100000D)
> > > > > > (XEN) Domain heap initialised
> > > > > > (XEN) Processor #0 6:12 APIC
version 21
> > > > > > (XEN) Processor #2 6:12 APIC
version 21
> > > > > > (XEN) Processor #4 6:12 APIC
version 21
> > > > > > (XEN) Processor #16 6:12 APIC
version 21
> > > > > > (XEN) Processor #18 6:12 APIC
version 21
> > > > > > (XEN) Processor #20 6:12 APIC
version 21
> > > > > > (XEN) Processor #1 6:12 APIC
version 21
> > > > > > (XEN) Processor #3 6:12 APIC
version 21
> > > > > > (XEN) Processor #5 6:12 APIC
version 21
> > > > > > (XEN) Processor #17 6:12 APIC
version 21
> > > > > > (XEN) Processor #19 6:12 APIC
version 21
> > > > > > (XEN) Processor #21 6:12 APIC
version 21
> > > > > > (XEN) IOAPIC[0]: apic_id 8,
version
32,
> address
> > > 0xfec00000, GSI
> > > > 0-23
> > > > > > (XEN) IOAPIC[1]: apic_id 9,
version
32,
> address
> > > 0xfec90000, GSI
> > > > 24-47
> > > > > > (XEN) Enabling APIC mode:
Phys.
Using 2
> I/O
> > APICs
> > > > > > (XEN) Intel VT-d DMAR tables
have
been
> parsed.
> > > > > > (XEN) Using scheduler: SMP
Credit
> Scheduler
> > (credit)
> > > > > > (XEN) Detected 3200.207 MHz
processor.
> > > > > > (XEN) VMX: Supported advanced
features:
> > > > > > (XEN) - APIC MMIO access
virtualisation
> > > > > > (XEN) - APIC TPR shadow
> > > > > > (XEN) - Extended Page Tables
(EPT)
> > > > > > (XEN) - Virtual-Processor
Identifiers
> (VPID)
> > > > > > (XEN) - Virtual NMI
> > > > > > (XEN) - MSR direct-access
bitmap
> > > > > > (XEN) VMX: EPT is available.
> > > > > > (XEN) VMX: VPID is available.
> > > > > > (XEN) HVM: VMX enabled
> > > > > > (XEN) HVM: Hardware Assisted
Paging
> detected.
> > > > > > (XEN) CPU0: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 1/2 eip
88000
> > > > > > (XEN) CPU1: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 2/4 eip
88000
> > > > > > (XEN) CPU2: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 3/16
eip
88000
> > > > > > (XEN) CPU3: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 4/18
eip
88000
> > > > > > (XEN) CPU4: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 5/20
eip
88000
> > > > > > (XEN) CPU5: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 6/1 eip
88000
> > > > > > (XEN) CPU6: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 7/3 eip
88000
> > > > > > (XEN) CPU7: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 8/5 eip
88000
> > > > > > (XEN) CPU8: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 9/17
eip
88000
> > > > > > (XEN) CPU9: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 10/19
eip
88000
> > > > > > (XEN) CPU10: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Booting processor 11/21
eip
88000
> > > > > > (XEN) CPU11: Intel Genuine
Intel(R)
CPU
> > 000
> > > @
> > > > 3.20GHz
> > > > > stepping 00
> > > > > > (XEN) Total of 12 processors
activated.
> > > > > > (XEN) ENABLING IO-APIC IRQs
> > > > > > (XEN) -> Using new ACK method
> > > > > > (XEN) checking TSC
synchronization
across
> 12
> > CPUs:
> > > passed.
> > > > > > (XEN) Platform timer is
14.318MHz
HPET
> > > > > > ?(XEN) Brought up 12 CPUs
> > > > > > (XEN) Intel VT-d Snoop Control
supported.
> > > > > > (XEN) Intel VT-d DMA
Passthrough
not
> supported.
> > > > > > (XEN) Intel VT-d Queued
Invalidation
> supported.
> > > > > > (XEN) Intel VT-d Interrupt
Remapping
> supported.
> > > > > > (XEN) I/O virtualisation
enabled
> > > > > > (XEN) I/O virtualisation for PV
guests
> disabled
> > > > > > (XEN) xenoprof: Initialization
failed.
> Intel
> > processor
> > > model 44
> > > > for P6
> > > > > class family is not supported
> > > > > > (XEN) *** LOADING DOMAIN 0 ***
> > > > > > (XEN) Xen kernel: 64-bit,
lsb,
compat32
> > > > > > (XEN) Dom0 kernel: 64-bit,
PAE,
lsb,
> paddr
> > 0x1000000 ->
> > > > 0x26bb000
> > > > > > (XEN) PHYSICAL MEMORY
ARRANGEMENT:
> > > > > > (XEN) Dom0 alloc.:
> > 0000000064000000->0000000068000000
> > > > (404490 pages
> > > > > to be allocated)
> > > > > > (XEN) VIRTUAL MEMORY
ARRANGEMENT:
> > > > > > (XEN) Loaded kernel:
> > ffffffff81000000->ffffffff826bb000
> > > > > > (XEN) Init. ramdisk:
> > ffffffff826bb000->ffffffff82d0d800
> > > > > > (XEN) Phys-Mach map:
> > ffffffff82d0e000->ffffffff83044050
> > > > > > (XEN) Start info:
> > ffffffff83045000->ffffffff830454b4
> > > > > > (XEN) Page tables:
> > ffffffff83046000->ffffffff83063000
> > > > > > (XEN) Boot stack:
> > ffffffff83063000->ffffffff83064000
> > > > > > (XEN) TOTAL:
> > ffffffff80000000->ffffffff83400000
> > > > > > (XEN) ENTRY ADDRESS:
ffffffff819c1200
> > > > > > (XEN) Dom0 has maximum 12 VCPUs
> > > > > > (XEN) Scrubbing Free RAM:
.done.
> > > > > > (XEN) Xen trace buffers:
disabled
> > > > > > (XEN) Std. Loglevel: Errors and
warnings
> > > > > > (XEN) Guest Loglevel: Nothing
> (Rate-limited:
> > Errors and
> > > > warnings)
> > > > > > (XEN) Xen is relinquishing VGA
console.
> > > > > > (XEN) *** Serial input -> DOM0
(type
> 'CTRL-a'
> > three
> > > times to
> > > > switch
> > > > > input to Xen)
> > > > > > (XEN) Freed 128kB init memory.
> > > > > > mapping kernel into physical
memory
> > > > > > Xen: setup ISA identity maps
> > > > > > about to get started...
> > > > > > Initializing cgroup subsys
cpuset
> > > > > > Initializing cgroup subsys cpu
> > > > > > Linux version 2.6.32.9
> > (kishore@xxxxxxxxxxxxxxxxxxxxx)
> > > (gcc
> > > > version
> > > > > 4.1.2 20080704 (Red Hat
4.1.2-46)) #1
SMP
> Mon Mar
> > 15
> > > 15:16:28 PDT
> > > > 2010
> > > > > > Command line: ro
> root=/dev/VolGroup01/LogVol00
> > > console=hvc0
> > > > > earlyprintk=xen nomodeset
> > > > > > KERNEL supported cpus:
> > > > > > Intel GenuineIntel
> > > > > > AMD AuthenticAMD
> > > > > > Centaur CentaurHauls
> > > > > > BIOS-provided physical RAM map:
> > > > > > Xen: 0000000000000000 -
000000000009d000
> > (usable)
> > > > > > Xen: 000000000009d000 -
0000000000100000
> > (reserved)
> > > > > > Xen: 0000000000100000 -
0000000066c0a000
> > (usable)
> > > > > > Xen: 000000006d597000 -
000000006d686000
> > (reserved)
> > > > > > Xen: 000000006f598000 -
000000006f59a000
> > (reserved)
> > > > > > Xen: 000000006f59a000 -
000000006f5af000
> (ACPI
> > NVS)
> > > > > > Xen: 000000006f5af000 -
000000006f5d9000
> > (reserved)
> > > > > > Xen: 000000006f5d9000 -
000000006f5f9000
> (ACPI
> > data)
> > > > > > Xen: 000000006f5f9000 -
000000006f6df000
> (ACPI
> > NVS)
> > > > > > Xen: 000000006f6df000 -
000000006f700000
> (ACPI
> > data)
> > > > > > Xen: 000000006f700000 -
0000000080000000
> > (reserved)
> > > > > > Xen: 00000000a0000000 -
00000000b0000000
> > (reserved)
> > > > > > Xen: 00000000fc000000 -
00000000fd000000
> > (reserved)
> > > > > > Xen: 00000000fed1c000 -
00000000fed20000
> > (reserved)
> > > > > > Xen: 00000000ffc00000 -
0000000100000000
> > (reserved)
> > > > > > bootconsole [xenboot0] enabled
> > > > > > DMI 2.4 present.
> > > > > > last_pfn = 0x66c0a
max_arch_pfn =
> 0x400000000
> > > > > > init_memory_mapping:
> > 0000000000000000-0000000066c0a000
> > > > > > RAMDISK: 026bb000 - 02d0d800
> > > > > > ACPI: RSDP 00000000000f03f0
00024
(v02
> INTEL )
> > > > > > ACPI: XSDT 000000006f6fe120
00064
(v01
> INTEL
> > THRLY
> > > 00000000
> > > > > 01000013)
> > > > > > ACPI: FACP 000000006f6fd000
000F4
(v04
> INTEL
> > THRLY
> > > 00000000
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: DSDT 000000006f6f5000
074F1
(v02
> INTEL
> > THRLY
> > > 00000003
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: FACS 000000006f5f9000
00040
> > > > > > ACPI: APIC 000000006f6f4000
001CC
(v02
> INTEL
> > THRLY
> > > 00000000
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: MCFG 000000006f6f3000
0003C
(v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: HPET 000000006f6f2000
00038
(v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: SLIT 000000006f6f1000
00030
(v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: WDDT 000000006f6f0000
00040
(v01
> INTEL
> > THRLY
> > > 00000000
> > > > MSFT
> > > > > 0100000D)
> > > > > > ACPI: SSDT 000000006f5d9000
1FDDC
(v01
> INTEL
> > SSDT PM
> > > 00004000
> > > > INTL
> > > > > 20061109)
> > > > > > ACPI: 000000006f6ee000
001D0
(v01
> INTEL
> > THRLY
> > > 00000001
> > > > MSFT
> > > > > 0100000D)
> > > > > > No NUMA configuration found
> > > > > > Faking a node at
> > 0000000000000000-0000000066c0a000
> > > > > > Bootmem setup node 0
> > 0000000000000000-0000000066c0a000
> > > > > > NODE_DATA [0000000000008000 -
> 000000000001ffff]
> > > > > > bootmap [0000000000020000 -
> 000000000002cd87]
> > pages d
> > > > > > (9 early reservations) ==>
bootmem
> [0000000000 -
> > > 0066c0a000]
> > > > > > #0 [0000000000 - 0000001000]
BIOS data
> page
> > ==>
> > > [0000000000
> > > > -
> > > > > 0000001000]
> > > > > > #1 [0003046000 - 0003063000]
XEN
> PAGETABLES
> > ==>
> > > [0003046000
> > > > -
> > > > > 0003063000]
> > > > > > #2 [0000006000 - 0000008000]
> TRAMPOLINE
> > ==>
> > > [0000006000
> > > > -
> > > > > 0000008000]
> > > > > > #3 [0001000000 - 000269ae98]
TEXT
> DATA BSS
> > ==>
> > > [0001000000
> > > > -
> > > > > 000269ae98]
> > > > > > #4 [00026bb000 - 0002d0d800]
> RAMDISK
> > ==>
> > > [00026bb000
> > > > -
> > > > > 0002d0d800]
> > > > > > #5 [0002d0e000 - 0003046000]
XEN START
> INFO
> > ==>
> > > [0002d0e000
> > > > -
> > > > > 0003046000]
> > > > > > #6 [000269b000 - 000269b011]
> BRK
> > ==>
> > > [000269b000
> > > > -
> > > > > 000269b011]
> > > > > > #7 [0000100000 - 000041a000]
> PGTABLE
> > ==>
> > > [0000100000
> > > > -
> > > > > 000041a000]
> > > > > > #8 [0000001000 - 0000001030]
ACPI
> SLIT
> > ==>
> > > [0000001000
> > > > -
> > > > > 0000001030]
> > > > > > found SMP MP-table at
[ffff8800000fd750]
> fd750
> > > > > > Zone PFN ranges:
> > > > > > DMA 0x00000000 ->
0x00001000
> > > > > > DMA32 0x00001000 ->
0x00100000
> > > > > > Normal 0x00100000 ->
0x00100000
> > > > > > Movable zone start PFN for each
node
> > > > > > early_node_map[2] active PFN
ranges
> > > > > > 0: 0x00000000 ->
0x0000009d
> > > > > > 0: 0x00000100 ->
0x00066c0a
> > > > > > ACPI: PM-Timer IO Port: 0x408
> > > > > > ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x02]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x04]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x10]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x12]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x05]
lapic_id[0x14]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x06]
lapic_id[0x01]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x07]
lapic_id[0x03]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x08]
lapic_id[0x05]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x09]
lapic_id[0x11]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0a]
lapic_id[0x13]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0b]
lapic_id[0x15]
> > enabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0c]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0d]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0e]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x0f]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x10]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x11]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x12]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x13]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x14]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x15]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x16]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC (acpi_id[0x17]
lapic_id[0xff]
> > disabled)
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x00]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x01]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x02]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x03]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x04]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x05]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x06]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x07]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x08]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x09]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x10]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x11]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x12]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x13]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x14]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x15]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x16]
high
level
> > lint[0x1])
> > > > > > ACPI: LAPIC_NMI (acpi_id[0x17]
high
level
> > lint[0x1])
> > > > > > ACPI: IOAPIC (id[0x08]
address[0xfec00000]
> > gsi_base[0])
> > > > > > IOAPIC[0]: apic_id 8, version
0,
address
> > 0xfec00000, GSI
> > > 0-0
> > > > > > ACPI: IOAPIC (id[0x09]
address[0xfec90000]
> > gsi_base[24])
> > > > > > IOAPIC[1]: apic_id 9, version
0,
address
> > 0xfec90000, GSI
> > > 24-24
> > > > > > ACPI: INT_SRC_OVR (bus 0
bus_irq 0
> global_irq 2
> > dfl dfl)
> > > > > > ERROR: Unable to locate IOAPIC
for
GSI 2
> > > > > > ACPI: INT_SRC_OVR (bus 0
bus_irq 9
> global_irq 9
> > high
> > > level)
> > > > > > ERROR: Unable to locate IOAPIC
for
GSI 9
> > > > > > Using ACPI (MADT) for SMP
configuration
> > information
> > > > > > ACPI: HPET id: 0x8086a401 base:
0xfed00000
> > > > > > SMP: Allowing 12 CPUs, 0
hotplug
CPUs
> > > > > > PM: Registered nosave memory:
> 000000000009d000 -
> > > > 0000000000100000
> > > > > > Allocating PCI resources
starting
at
> b0000000
> > (gap:
> > > > b0000000:4c000000)
> > > > > > Booting paravirtualized kernel
on
Xen
> > > > > > Xen version: 3.4.3-rc4-pre
(preserve-AD)
> (dom0)
> > > > > > NR_CPUS:512 nr_cpumask_bits:512
> nr_cpu_ids:12
> > > nr_node_ids:1
> > > > > > PERCPU: Embedded 478 pages/cpu
> @ffff880005ebc000
> > > s1928024 r8192
> > > > d21672
> > > > > u1957888
> > > > > > pcpu-alloc: s1928024 r8192
d21672
u1957888
> > > alloc=478*4096
> > > > > > pcpu-alloc: [0] 00 [0] 01 [0]
02
[0] 03
> [0] 04
> > [0] 05
> > > [0] 06
> > > > [0] 07
> > > > > > pcpu-alloc: [0] 08 [0] 09 [0]
10
[0] 11
> > > > > > Xen: using vcpu_info placement
> > > > > > Built 1 zonelists in Node
order,
mobility
> > grouping on.
> > > Total
> > > > pages:
> > > > > 409291
> > > > > > Policy zone: DMA32
> > > > > > Kernel command line: ro
> > root=/dev/VolGroup01/LogVol00
> > > > console=hvc0
> > > > > earlyprintk=xen nomodeset
> > > > > > PID hash table entries: 4096
(order: 3,
> 32768
> > bytes)
> > > > > > Initializing CPU#0
> > > > > > DMA: Placing 64MB software IO
TLB
between
> > > ffff880007525000 -
> > > > > ffff88000b525000
> > > > > > DMA: software IO TLB at phys
0x7525000 -
> > 0xb525000
> > > > > > xen_swiotlb_fixup:
buf=ffff880007525000
> > size=67108864
> > > > > > xen_swiotlb_fixup:
buf=ffff88000b585000
> > size=32768
> > > > > > Memory: 1514268k/1683496k
available
(4654k
> kernel
> > code,
> > > 396k
> > > > absent,
> > > > > 168832k reserved, 3443k data,
3396k
init)
> > > > > > SLUB: Genslabs=14, HWalign=64,
Order=0-3,
> > MinObjects=0,
> > > > CPUs=12,
> > > > > Nodes=1
> > > > > > Hierarchical RCU
implementation.
> > > > > > NR_IRQS:4352 nr_irqs:3072
> > > > > > Already setup the GSI :0
> > > > > > Already setup the GSI :1
> > > > > > Already setup the GSI :2
> > > > > > Already setup the GSI :3
> > > > > > Already setup the GSI :4
> > > > > > Already setup the GSI :5
> > > > > > Already setup the GSI :6
> > > > > > Already setup the GSI :7
> > > > > > Already setup the GSI :8
> > > > > > Already setup the GSI :9
> > > > > > Already setup the GSI :10
> > > > > > Already setup the GSI :11
> > > > > > Already setup the GSI :12
> > > > > > Already setup the GSI :13
> > > > > > Already setup the GSI :14
> > > > > > Already setup the GSI :15
> > > > > > ACPI: INT_SRC_OVR (bus 0
bus_irq 0
> global_irq 2
> > dfl dfl)
> > > > > > ACPI: INT_SRC_OVR (bus 0
bus_irq 9
> global_irq 9
> > high
> > > level)
> > > > > > xen: sci override: source_irq=9
> global_irq=9
> > trigger=c
> > > > polarity=1
> > > > > > xen_allocate_pirq: returning
irq 9
for gsi
> 9
> > > > > > Already setup the GSI :9
> > > > > > xen: acpi sci 9
> > > > > > Console: colour VGA+ 80x25
> > > > > > console [hvc0] enabled,
bootconsole
> disabled
> > console
> > > [hvc0]
> > > > enabled,
> > > > > bootconsole disabled
> > > > > > Lock dependency validator:
Copyright (c)
> 2006 Red
> > Hat,
> > > Inc.,
> > > > Ingo
> > > > > Molnar ...
MAX_LOCKDEP_SUBCLASSES: 8
...
> > MAX_LOCK_DEPTH:
> > > > 48
> > > > > ... MAX_LOCKDEP_KEYS: 8191
...
> > CLASSHASH_SIZE:
> > > > 4096 ...
> > > > > MAX_LOCKDEP_ENTRIES: 16384 ...
> > MAX_LOCKDEP_CHAINS:
> > > 32768
> > > > ...
> > > > > CHAINHASH_SIZE: 16384
memory used
> by lock
> > > dependency
> > > > info:
> > > > > 6367 kB per task-struct memory
footprint:
> 2688
> > bytes
> > > allocated
> > > > 17039360
> > > > > bytes of page_cgroup please try
> > 'cgroup_disable=memory'
> > > option if
> > > > you
> > > > > don't want memory cgroups
installing
Xen
> timer for
> > CPU 0
> > > Detected
> > > > > 3200.206 MHz processor.
Calibrating
delay
> loop
> > (skipped),
> > > value
> > > > > calculated using timer frequency..
6400.41
> BogoMIPS
> > > (lpj=3200206)
> > > > > Security Framework initialized
SELinux:
> > Initializing.
> > > Dentry
> > > > cache hash
> > > > > table entries: 262144 (order: 9,
2097152
> bytes)
> > > Inode-cache hash
> > > > table
> > > > > entries: 131072 (order: 8, 1048576
bytes)
> > Mount-cache hash
> > > table
> > > > > entries: 256 Initializing cgroup
subsys ns
> > Initializing
> > > cgroup
> > > > subsys
> > > > > cpuacct Initializing cgroup subsys
memory
> > Initializing
> > > cgroup
> > > > subsys
> > > > > devices Initializing cgroup subsys
freezer
> > Initializing
> > > cgroup
> > > > subsys
> > > > > net_cls CPU: L1 I cache: 32K, L1 D
cache:
> 32K CPU:
> > L2
> > > cache: 256K
> > > > CPU:
> > > > > L3 cache: 12288K CPU 0/0x0 ->
Node 0
CPU:
> > Unsupported
> > > number of
> > > > siblings
> > > > > 32 Performance Events:
unsupported p6
CPU
> model 44
> > no PMU
> > > driver,
> > > > > software events only. lockdep:
fixing
up
> > alternatives. SMP
> > > > alternatives:
> > > > > switching to UP code ACPI: Core
revision
> 20090903
> > ftrace:
> > > > converting
> > > > > mcount calls to 0f 1f 44 00 00
ftrace:
> allocating
> > 27971
> > > entries
> > > > in 110
> > > > > pages installing Xen timer for
CPU 1
> lockdep:
> > fixing up
> > > > alternatives.
> > > > > SMP alternatives: switching to SMP
code
> > Initializing CPU#1
> > > CPU:
> > > > L1 I
> > > > > cache: 32K, L1 D cache: 32K CPU:
L2
cache:
> 256K
> > CPU: L3
> > > cache:
> > > > 12288K
> > > > > CPU 1/0x0 -> Node 0 CPU:
Unsupported
number
> of
> > siblings 32
> > > > installing
> > > > > Xen timer for CPU 2 Initializing
CPU#2 CPU:
> L1 I
> > cache:
> > > 32K, L1 D
> > > > cache:
> > > > > 32K CPU: L2 cache: 256K CPU: L3
cache:
> 12288K CPU
> > 2/0x0 ->
> > > Node 0
> > > > CPU:
> > > > > Unsupported number of siblings 32
installing
> Xen
> > timer for
> > > CPU 3
> > > > > Initializing CPU#3 CPU: L1 I
cache:
32K, L1
> D
> > cache: 32K
> > > CPU: L2
> > > > cache:
> > > > > 256K CPU: L3 cache: 12288K CPU
3/0x0
-> Node
> 0 CPU:
> > > Unsupported
> > > > number
> > > > > of siblings 32 installing Xen
timer
for CPU
> 4
> > Initializing
> > > CPU#4
> > > > CPU: L1
> > > > > I cache: 32K, L1 D cache: 32K
CPU: L2
cache:
> 256K
> > CPU: L3
> > > cache:
> > > > 12288K
> > > > > CPU 4/0x0 -> Node 0 CPU:
Unsupported
number
> of
> > siblings 32
> > > > installing
> > > > > Xen timer for CPU 5 Initializing
CPU#5 CPU:
> L1 I
> > cache:
> > > 32K, L1 D
> > > > cache:
> > > > > 32K CPU: L2 cache: 256K CPU: L3
cache:
> 12288K CPU
> > 5/0x0 ->
> > > Node 0
> > > > CPU:
> > > > > Unsupported number of siblings 32
installing
> Xen
> > timer for
> > > CPU 6
> > > > > Initializing CPU#6 CPU: L1 I
cache:
32K, L1
> D
> > cache: 32K
> > > CPU: L2
> > > > cache:
> > > > > 256K CPU: L3 cache: 12288K CPU
6/0x0
-> Node
> 0 CPU:
> > > Unsupported
> > > > number
> > > > > of siblings 32 installing Xen
timer
for CPU
> 7
> > Initializing
> > > CPU#7
> > > > CPU: L1
> > > > > I cache: 32K, L1 D cache: 32K
CPU: L2
cache:
> 256K
> > CPU: L3
> > > cache:
> > > > 12288K
> > > > > CPU 7/0x0 -> Node 0 CPU:
Unsupported
number
> of
> > siblings 32
> > > > installing
> > > > > Xen timer for CPU 8 Initializing
CPU#8 CPU:
> L1 I
> > cache:
> > > 32K, L1 D
> > > > cache:
> > > > > 32K CPU: L2 cache: 256K CPU: L3
cache:
> 12288K CPU
> > 8/0x0 ->
> > > Node 0
> > > > CPU:
> > > > > Unsupported number of siblings 32
installing
> Xen
> > timer for
> > > CPU 9
> > > > > Initializing CPU#9 CPU: L1 I
cache:
32K, L1
> D
> > cache: 32K
> > > CPU: L2
> > > > cache:
> > > > > 256K CPU: L3 cache: 12288K CPU
9/0x0
-> Node
> 0 CPU:
> > > Unsupported
> > > > number
> > > > > of siblings 32 installing Xen
timer
for CPU
> 10
> > > Initializing
> > > > CPU#10 CPU:
> > > > > L1 I cache: 32K, L1 D cache: 32K
CPU:
L2
> cache:
> > 256K CPU:
> > > L3
> > > > cache:
> > > > > 12288K CPU 10/0x0 -> Node 0 CPU:
Unsupported
> number
> > of
> > > siblings
> > > > 32
> > > > > installing Xen timer for CPU 11
Initializing
> CPU#11
> > CPU:
> > > L1 I
> > > > cache:
> > > > > 32K, L1 D cache: 32K CPU: L2
cache:
256K
> CPU: L3
> > cache:
> > > 12288K
> > > > CPU
> > > > > 11/0x0 -> Node 0 CPU: Unsupported
number of
> > siblings 32
> > > Brought
> > > > up 12
> > > > > CPUs Grant table initialized
regulator: core
> > version 0.5
> > > Time:
> > > > 14:45:00
> > > > > Date: 03/16/10 NET: Registered
protocol
> family 16
> > > > xenbus_probe_init ok
> > > > > ACPI FADT declares the system
doesn't
> support PCIe
> > ASPM,
> > > so
> > > > disable it
> > > > > ACPI: bus type pci registered PCI:
MCFG
> > configuration 0:
> > > base
> > > > a0000000
> > > > > segment 0 buses 0 - 255 PCI: MCFG
area at
> a0000000
> > > reserved in
> > > > E820 PCI:
> > > > > Using MMCONFIG at a0000000 -
afffffff
PCI:
> Using
> > > configuration
> > > > type 1
> > > > > for base access bio: create slab
<bio-0> at
> 0 ACPI
> > Error:
> > > Field
> > > > [CPB3]
> > > > > at 96 exceeds Buffer [NULL] size
64
(bits)
> > > > (20090903/dsopcode-596) ACPI
> > > > > Error (psparse-0537): Method
parse/execution
> failed
> > > [\_SB_._OSC]
> > > > (Node
> > > > > ffff880064e00c98),
AE_AML_BUFFER_LIMIT ACPI:
> > Interpreter
> > > enabled
> > > > ACPI:
> > > > > (supports S0 S1 S3 S4 S5) ACPI:
Using
IOAPIC
> for
> > interrupt
> > > > routing ACPI
> > > > > Warning: Incorrect checksum in
table
[ ]
> - 97,
> > should
> > > be DB
> > > > > (20090903/tbutils-314) ACPI: No
dock
devices
> found.
> > ACPI:
> > > PCI
> > > > Root
> > > > > Bridge [PCI0] (0000:00) pci
0000:00:01.0:
> PME#
> > supported
> > > from D0
> > > > D3hot
> > > > > D3cold pci 0000:00:01.0: PME#
disabled pci
> > 0000:00:02.0:
> > > PME#
> > > > supported
> > > > > from D0 D3hot D3cold pci
0000:00:02.0: PME#
> > disabled pci
> > > > 0000:00:03.0:
> > > > > PME# supported from D0 D3hot
D3cold
pci
> > 0000:00:03.0: PME#
> > > > disabled pci
> > > > > 0000:00:04.0: PME# supported from
D0
D3hot
> D3cold
> > pci
> > > > 0000:00:04.0: PME#
> > > > > disabled pci 0000:00:05.0: PME#
supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:00:05.0: PME# disabled pci
> 0000:00:06.0: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:00:06.0:
PME#
disabled
> pci
> > > 0000:00:07.0:
> > > > PME#
> > > > > supported from D0 D3hot D3cold pci
> 0000:00:07.0:
> > PME#
> > > disabled
> > > > pci
> > > > > 0000:00:08.0: PME# supported from
D0
D3hot
> D3cold
> > pci
> > > > 0000:00:08.0: PME#
> > > > > disabled pci 0000:00:09.0: PME#
supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:00:09.0: PME# disabled pci
> 0000:00:0a.0: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:00:0a.0:
PME#
disabled
> pci
> > > 0000:00:13.0:
> > > > PME#
> > > > > supported from D0 D3hot D3cold pci
> 0000:00:13.0:
> > PME#
> > > disabled
> > > > pci
> > > > > 0000:00:1a.7: PME# supported from
D0
D3hot
> D3cold
> > pci
> > > > 0000:00:1a.7: PME#
> > > > > disabled pci 0000:00:1c.0: PME#
supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:00:1c.0: PME# disabled pci
> 0000:00:1c.4: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:00:1c.4:
PME#
disabled
> pci
> > > 0000:00:1c.5:
> > > > PME#
> > > > > supported from D0 D3hot D3cold pci
> 0000:00:1c.5:
> > PME#
> > > disabled
> > > > pci
> > > > > 0000:00:1d.7: PME# supported from
D0
D3hot
> D3cold
> > pci
> > > > 0000:00:1d.7: PME#
> > > > > disabled pci 0000:00:1f.0: quirk:
region
> 0400-047f
> > claimed
> > > by
> > > > ICH6
> > > > > ACPI/GPIO/TCO pci 0000:00:1f.0:
quirk:
> region
> > 0500-053f
> > > claimed
> > > > by ICH6
> > > > > GPIO pci 0000:00:1f.0: ICH7 LPC
Generic IO
> decode 1
> > PIO at
> > > 0680
> > > > (mask
> > > > > 000f) pci 0000:00:1f.0: ICH7 LPC
Generic IO
> decode
> > 2 PIO
> > > at 0ca0
> > > > (mask
> > > > > 000f) pci 0000:00:1f.0: ICH7 LPC
Generic IO
> decode
> > 3 PIO
> > > at 0600
> > > > (mask
> > > > > 001f) pci 0000:00:1f.2: PME#
supported from
> D3hot
> > pci
> > > > 0000:00:1f.2: PME#
> > > > > disabled pci 0000:01:00.0: PME#
supported
> from D0
> > D3hot
> > > D3cold
> > > > pci
> > > > > 0000:01:00.0: PME# disabled pci
> 0000:01:00.1: PME#
> > > supported from
> > > > D0
> > > > > D3hot D3cold pci 0000:01:00.1:
PME#
disabled
> pci
> > > 0000:0c:00.0:
> > > > disabling
> > > > > ASPM on pre-1.1 PCIe device. You
can
enable
> it
> > with
> > > > 'pcie_aspm=force'
> > > > > pci 0000:00:1e.0: transparent
bridge
ACPI:
> PCI Root
> > Bridge
> > > [PCI1]
> > > > > (0000:fe) ACPI: PCI Root Bridge
[PCI2]
> (0000:ff)
> > ACPI: PCI
> > > > Interrupt
> > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10
*11
12 14
> 15)
> > ACPI: PCI
> > > > Interrupt Link
> > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11
12 14
15)
> ACPI: PCI
> > > Interrupt
> > > > Link
> > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11
12 14
15)
> ACPI: PCI
> > > Interrupt
> > > > Link
> > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11
12 14
15)
> ACPI: PCI
> > > Interrupt
> > > > Link
> > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12
14
15) *0,
> > disabled.
> > > ACPI: PCI
> > > > > Interrupt Link [LNKF] (IRQs 3 4 5
6 7
9 10
> *11 12
> > 14 15)
> > > ACPI:
> > > > PCI
> > > > > Interrupt Link [LNKG] (IRQs 3 4 5
6 7
9 10
> 11 12 14
> > 15)
> > > *0,
> > > > disabled.
> > > > > ACPI: PCI Interrupt Link [LNKH]
(IRQs
3 4 5
> 6 7 9
> > *10 11
> > > 12 14
> > > > 15)
> > > > > xenbus_probe_backend_init bus
registered ok
> > > > xenbus_probe_frontend_init
> > > > > bus registered ok xen_balloon:
Initialising
> balloon
> > driver
> > > with
> > > > page
> > > > > order 0. vgaarb: device added:
> > > > >
> > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
> > > vgaarb:
> > > > loaded
> > > > > SCSI subsystem initialized
usbcore:
> registered new
> > > interface
> > > > driver
> > > > > usbfs usbcore: registered new
interface
> driver hub
> > > usbcore:
> > > > registered
> > > > > new device driver usb PCI: Using
ACPI
for
> IRQ
> > routing
> > > NetLabel:
> > > > > Initializing NetLabel: domain
hash
size =
> 128
> > NetLabel:
> > > > protocols =
> > > > > UNLABELED CIPSOv4 NetLabel:
unlabeled
> traffic
> > allowed by
> > > default
> > > > > Switching to clocksource xen
kstop/0
used
> greatest
> > stack
> > > depth:
> > > > 6568
> > > > > bytes left kstop/1 used greatest
stack
> depth: 6536
> > bytes
> > > left
> > > > pnp: PnP
> > > > > ACPI init ACPI: bus type pnp
registered
> > xen_allocate_pirq:
> > > > returning irq
> > > > > 8 for gsi 8 Already setup the GSI
:8
> > xen_allocate_pirq:
> > > returning
> > > > irq 13
> > > > > for gsi 13 Already setup the GSI
:13
pnp:
> PnP ACPI:
> > found
> > > 13
> > > > devices
> > > > > ACPI: ACPI bus type pnp
unregistered
system
> 00:07:
> > ioport
> > > range
> > > > > 0x500-0x53f has been reserved
system
00:07:
> ioport
> > range
> > > > 0x400-0x47f has
> > > > > been reserved system 00:07: ioport
range
> > 0x800-0x81f has
> > > been
> > > > reserved
> > > > > system 00:07: ioport range
0x2f8-0x2ff has
> been
> > reserved
> > > system
> > > > 00:07:
> > > > > iomem range 0xfed1c000-0xfed8bffe
could not
> be
> > reserved
> > > system
> > > > 00:07:
> > > > > iomem range 0xff000000-0xffffffff
could not
> be
> > reserved
> > > system
> > > > 00:07:
> > > > > iomem range 0xfee00000-0xfeefffff
has
been
> reserved
> > system
> > > 00:07:
> > > > iomem
> > > > > range 0xfe900000-0xfe90001f has
been
> reserved
> > system
> > > 00:07: iomem
> > > > range
> > > > > 0xfea00000-0xfea0001f has been
reserved
> system
> > 00:07:
> > > iomem range
> > > > > 0xfed1b000-0xfed1bfff has been
reserved pci
> > 0000:0c:00.0:
> > > BAR 6:
> > > > no
> > > > > parent found for of device
> [0xffff0000-0xffffffff]
> > pci
> > > > 0000:00:01.0: PCI
> > > > > bridge, secondary bus 0000:01 pci
> 0000:00:01.0:
> > IO
> > > window:
> > > > > 0x1000-0x1fff pci 0000:00:01.0:
MEM
> window:
> > > > 0xb1900000-0xb19fffff pci
> > > > > 0000:00:01.0: PREFETCH window:
disabled
> pci
> > > 0000:00:02.0: PCI
> > > > bridge,
> > > > > secondary bus 0000:02 pci
0000:00:02.0: IO
> > window:
> > > disabled pci
> > > > > 0000:00:02.0: MEM window:
disabled
pci
> > 0000:00:02.0:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:03.0:
PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:03 pci
> > > > > 0000:00:03.0: IO window:
disabled
pci
> > 0000:00:03.0:
> > > MEM
> > > > window:
> > > > > disabled pci 0000:00:03.0:
PREFETCH
> window:
> > disabled pci
> > > > 0000:00:04.0:
> > > > > PCI bridge, secondary bus 0000:04
pci
> 0000:00:04.0:
> > IO
> > > window:
> > > > > disabled pci 0000:00:04.0: MEM
window:
> disabled
> > pci
> > > > 0000:00:04.0:
> > > > > PREFETCH window: disabled pci
0000:00:05.0:
> PCI
> > bridge,
> > > secondary
> > > > bus
> > > > > 0000:05 pci 0000:00:05.0: IO
window:
> disabled pci
> > > 0000:00:05.0:
> > > > MEM
> > > > > window: disabled pci 0000:00:05.0:
> PREFETCH
> > window:
> > > disabled
> > > > pci
> > > > > 0000:00:06.0: PCI bridge,
secondary
bus
> 0000:06 pci
> > > 0000:00:06.0:
> > > > IO
> > > > > window: disabled pci 0000:00:06.0:
MEM
> window:
> > disabled
> > > pci
> > > > > 0000:00:06.0: PREFETCH window:
disabled
> pci
> > > 0000:00:07.0: PCI
> > > > bridge,
> > > > > secondary bus 0000:07 pci
0000:00:07.0: IO
> > window:
> > > disabled pci
> > > > > 0000:00:07.0: MEM window:
disabled
pci
> > 0000:00:07.0:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:08.0:
PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:08 pci
> > > > > 0000:00:08.0: IO window:
disabled
pci
> > 0000:00:08.0:
> > > MEM
> > > > window:
> > > > > disabled pci 0000:00:08.0:
PREFETCH
> window:
> > disabled pci
> > > > 0000:00:09.0:
> > > > > PCI bridge, secondary bus 0000:09
pci
> 0000:00:09.0:
> > IO
> > > window:
> > > > > 0x3000-0x3fff pci 0000:00:09.0:
MEM
> window:
> > > > 0xb1b00000-0xb1cfffff pci
> > > > > 0000:00:09.0: PREFETCH window:
> > > > 0x000000b1d00000-0x000000b1efffff pci
> > > > > 0000:00:0a.0: PCI bridge,
secondary
bus
> 0000:0a pci
> > > 0000:00:0a.0:
> > > > IO
> > > > > window: disabled pci 0000:00:0a.0:
MEM
> window:
> > disabled
> > > pci
> > > > > 0000:00:0a.0: PREFETCH window:
disabled
> pci
> > > 0000:00:1c.0: PCI
> > > > bridge,
> > > > > secondary bus 0000:0b pci
0000:00:1c.0: IO
> > window:
> > > disabled pci
> > > > > 0000:00:1c.0: MEM window:
disabled
pci
> > 0000:00:1c.0:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:1c.4:
PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:0c pci
> > > > > 0000:00:1c.4: IO window:
disabled
pci
> > 0000:00:1c.4:
> > > MEM
> > > > window:
> > > > > 0xb1000000-0xb18fffff pci
0000:00:1c.4:
> PREFETCH
> > window:
> > > > > 0x000000b0000000-0x000000b0ffffff
pci
> 0000:00:1c.5:
> > PCI
> > > bridge,
> > > > > secondary bus 0000:0d pci
0000:00:1c.5: IO
> > window:
> > > disabled pci
> > > > > 0000:00:1c.5: MEM window:
disabled
pci
> > 0000:00:1c.5:
> > > PREFETCH
> > > > > window: disabled pci 0000:00:1e.0:
PCI
> bridge,
> > secondary
> > > bus
> > > > 0000:0e pci
> > > > > 0000:00:1e.0: IO window:
disabled
pci
> > 0000:00:1e.0:
> > > MEM
> > > > window:
> > > > > disabled pci 0000:00:1e.0:
PREFETCH
> window:
> > disabled pci
> > > > 0000:00:01.0:
> > > > > PCI INT A -> GSI 28 (level, low)
->
IRQ 28
> pci
> > > 0000:00:02.0: PCI
> > > > INT A
> > > > > -> GSI 29 (level, low) -> IRQ
29 pci
> 0000:00:03.0:
> > PCI INT
> > > A ->
> > > > GSI 24
> > > > > (level, low) -> IRQ 24 pci
0000:00:04.0: PCI
> INT A
> > -> GSI
> > > 25
> > > > (level,
> > > > > low) -> IRQ 25 pci 0000:00:05.0:
PCI
INT A
> -> GSI
> > 26
> > > (level, low)
> > > > -> IRQ
> > > > > 26 pci 0000:00:06.0: PCI INT A ->
GSI
27
> (level,
> > low) ->
> > > IRQ 27
> > > > pci
> > > > > 0000:00:07.0: PCI INT A -> GSI 30
(level,
> low) ->
> > IRQ 30
> > > pci
> > > > > 0000:00:08.0: PCI INT A -> GSI 31
(level,
> low) ->
> > IRQ 31
> > > pci
> > > > > 0000:00:09.0: PCI INT A -> GSI 32
(level,
> low) ->
> > IRQ 32
> > > pci
> > > > > 0000:00:0a.0: PCI INT A -> GSI 33
(level,
> low) ->
> > IRQ 33
> > > pci
> > > > > 0000:00:1c.0: PCI INT A -> GSI 16
(level,
> low) ->
> > IRQ 16
> > > > > xen_allocate_pirq: returning irq
16
for gsi
> 16
> > Already
> > > setup the
> > > > GSI :16
> > > > > pci 0000:00:1c.4: PCI INT A ->
GSI 16
> (level, low)
> > -> IRQ
> > > 16 pci
> > > > > 0000:00:1c.5: PCI INT B -> GSI 17
(level,
> low) ->
> > IRQ 17
> > > NET:
> > > > Registered
> > > > > protocol family 2 IP route cache
hash
table
> > entries: 65536
> > > > (order: 7,
> > > > > 524288 bytes) TCP established hash
table
> entries:
> > 262144
> > > (order:
> > > > 10,
> > > > > 4194304 bytes) TCP bind hash table
entries:
> 65536
> > (order:
> > > 10,
> > > > 4718592
> > > > > bytes) TCP: Hash tables configured
> (established
> > 262144
> > > bind
> > > > 65536) TCP
> > > > > reno registered NET: Registered
protocol
> family 1
> > pci
> > > > 0000:01:00.0:
> > > > > Disabling L0s pci 0000:01:00.1:
Disabling
> L0s
> > Trying to
> > > unpack
> > > > rootfs
> > > > > image as initramfs... Freeing
initrd
memory:
> 6474k
> > freed
> > > DMA-API:
> > > > > preallocated 32768 debug entries
DMA-API:
> debugging
> > > enabled by
> > > > kernel
> > > > > config PCI-DMA: Using software
bounce
> buffering for
> > IO
> > > (SWIOTLB)
> > > > DMA:
> > > > > Placing 64MB software IO TLB
between
> > ffff880007525000 -
> > > > ffff88000b525000
> > > > > DMA: software IO TLB at phys
0x7525000 -
> 0xb525000
> > audit:
> > > > initializing
> > > > > netlink socket (disabled)
type=2000
> > > audit(1268750702.035:1):
> > > > initialized
> > > > > HugeTLB registered 2 MB page size,
> pre-allocated 0
> > pages
> > > VFS:
> > > > Disk
> > > > > quotas dquot_6.5.2 Dquot-cache
hash
table
> entries:
> > 512
> > > (order 0,
> > > > 4096
> > > > > bytes) msgmni has been set to 2970
> cryptomgr_test
> > used
> > > greatest
> > > > stack
> > > > > depth: 5864 bytes left
cryptomgr_test
used
> greatest
> > stack
> > > depth:
> > > > 5816
> > > > > bytes left alg: No test for stdrng
(krng)
> Block
> > layer SCSI
> > > > generic (bsg)
> > > > > driver version 0.4 loaded (major
252)
io
> scheduler
> > noop
> > > > registered io
> > > > > scheduler anticipatory registered
io
> scheduler
> > deadline
> > > > registered io
> > > > > scheduler cfq registered (default)
> pci_hotplug: PCI
> > Hot
> > > Plug PCI
> > > > Core
> > > > > version: 0.5 pciehp
0000:00:09.0:pcie04: HPC
> > vendor_id
> > > 8086
> > > > device_id
> > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI
Express
> Hot Plug
> > > Controller
> > > > Driver
> > > > > version: 0.4 acpiphp: ACPI Hot
Plug
PCI
> Controller
> > Driver
> > > > version: 0.5
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > acpiphp_glue: Slot 2 already
registered by
> another
> > hotplug
> > > driver
> > > > > pci-stub: invalid id string ""
input:
Sleep
> Button
> > as
> > > > >
> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
> > > ACPI:
> > > > Sleep
> > > > > Button [SLPB] input: Power Button
as
> > > > >
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
> > Power
> > > Button
> > > > [PWRF]
> > > > > registering netback
hpet_acpi_add: no
> address or
> > irqs in
> > > _CRS
> > > > > Non-volatile memory driver v1.3
Linux
> agpgart
> > interface
> > > v0.103
> > > > Serial:
> > > > > 8250/16550 driver, 4 ports, IRQ
sharing
> enabled
> > > serial8250: ttyS1
> > > > at I/O
> > > > > 0x2f8 (irq = 3) is a 16550A brd:
module
> loaded
> > loop:
> > > module
> > > > loaded
> > > > > input: Macintosh mouse button
emulation as
> > > > /devices/virtual/input/input2
> > > > > ahci 0000:00:1f.2: PCI INT A ->
GSI
19
> (level, low)
> > -> IRQ
> > > 19
> > > > ahci
> > > > > 0000:00:1f.2: AHCI 0001.0200 32
slots
6
> ports 3
> > Gbps 0x3f
> > > impl
> > > > SATA mode
> > > > > ahci 0000:00:1f.2: flags: 64bit
ncq
sntf pm
> led clo
> > pio
> > > slum part
> > > > ccc
> > > > > ems scsi0 : ahci scsi1 : ahci
scsi2
: ahci
> scsi3 :
> > ahci
> > > scsi4 :
> > > > ahci
> > > > > scsi5 : ahci ata1: SATA max
UDMA/133
> irq_stat
> > 0x00400040,
> > > > connection
> > > > > status changed irq 2996 ata2: SATA
max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00180 irq 2996 ata3:
SATA
max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00200 irq 2996 ata4:
SATA
max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00280 irq 2996 ata5:
SATA
max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00300 irq 2996 ata6:
SATA
max
> UDMA/133
> > abar
> > > > m2048@0xb1a00000
> > > > > port 0xb1a00380 irq 2996 Fixed
MDIO
Bus:
> probed
> > ehci_hcd:
> > > USB 2.0
> > > > > 'Enhanced' Host Controller (EHCI)
Driver
> ehci_hcd
> > > 0000:00:1a.7:
> > > > PCI INT
> > > > > C -> GSI 18 (level, low) -> IRQ
18
ehci_hcd
> > 0000:00:1a.7:
> > > EHCI
> > > > Host
> > > > > Controller ehci_hcd 0000:00:1a.7:
new
USB
> bus
> > registered,
> > > > assigned bus
> > > > > number 1 ehci_hcd 0000:00:1a.7:
debug
port 1
> > ehci_hcd
> > > > 0000:00:1a.7: irq
> > > > > 18, io mem 0xb1a02000 ehci_hcd
0000:00:1a.7:
> USB
> > 2.0
> > > started,
> > > > EHCI 1.00
> > > > > usb usb1: New USB device found,
> idVendor=1d6b,
> > > idProduct=0002 usb
> > > > usb1:
> > > > > New USB device strings: Mfr=3,
Product=2,
> > SerialNumber=1
> > > usb
> > > > usb1:
> > > > > Product: EHCI Host Controller usb
usb1:
> > Manufacturer:
> > > Linux
> > > > 2.6.32.9
> > > > > ehci_hcd usb usb1: SerialNumber:
> 0000:00:1a.7 usb
> > usb1:
> > > > configuration #1
> > > > > chosen from 1 choice hub 1-0:1.0:
USB
hub
> found hub
> > > 1-0:1.0: 6
> > > > ports
> > > > > detected ehci_hcd 0000:00:1d.7:
PCI
INT A ->
> GSI 23
> > > (level, low)
> > > > -> IRQ
> > > > > 23 ehci_hcd 0000:00:1d.7: EHCI
Host
> Controller
> > ehci_hcd
> > > > 0000:00:1d.7:
> > > > > new USB bus registered, assigned
bus
number
> 2
> > ehci_hcd
> > > > 0000:00:1d.7:
> > > > > debug port 1 ehci_hcd
0000:00:1d.7:
irq 23,
> io mem
> > > 0xb1a01000
> > > > ehci_hcd
> > > > > 0000:00:1d.7: USB 2.0 started,
EHCI
1.00 usb
> usb2:
> > New USB
> > > device
> > > > found,
> > > > > idVendor=1d6b, idProduct=0002 usb
usb2: New
> USB
> > device
> > > strings:
> > > > Mfr=3,
> > > > > Product=2, SerialNumber=1 usb
usb2:
Product:
> EHCI
> > Host
> > > Controller
> > > > usb
> > > > > usb2: Manufacturer: Linux 2.6.32.9
ehci_hcd
> usb
> > usb2:
> > > > SerialNumber:
> > > > > 0000:00:1d.7 usb usb2:
configuration
#1
> chosen from
> > 1
> > > choice hub
> > > > > 2-0:1.0: USB hub found hub
2-0:1.0: 6
ports
> > detected
> > > ohci_hcd:
> > > > USB 1.1
> > > > > 'Open' Host Controller (OHCI)
Driver
> uhci_hcd: USB
> > > Universal Host
> > > > > Controller Interface driver
> xen_allocate_pirq:
> > returning
> > > irq 16
> > > > for gsi
> > > > > 16 Already setup the GSI :16
uhci_hcd
> 0000:00:1a.0:
> > PCI
> > > INT A ->
> > > > GSI 16
> > > > > (level, low) -> IRQ 16 uhci_hcd
> 0000:00:1a.0: UHCI
> > Host
> > > > Controller
> > > > > uhci_hcd 0000:00:1a.0: new USB bus
> registered,
> > assigned
> > > bus
> > > > number 3
> > > > > uhci_hcd 0000:00:1a.0: irq 16, io
base
> 0x000020e0
> > usb
> > > usb3: New
> > > > USB
> > > > > device found, idVendor=1d6b,
idProduct=0001
> usb
> > usb3: New
> > > USB
> > > > device
> > > > > strings: Mfr=3, Product=2,
SerialNumber=1
> usb usb3:
> > > Product: UHCI
> > > > Host
> > > > > Controller usb usb3: Manufacturer:
Linux
> 2.6.32.9
> > uhci_hcd
> > > usb
> > > > usb3:
> > > > > SerialNumber: 0000:00:1a.0 usb
usb3:
> configuration
> > #1
> > > chosen from
> > > > 1
> > > > > choice hub 3-0:1.0: USB hub found
hub
> 3-0:1.0: 2
> > ports
> > > detected
> > > > uhci_hcd
> > > > > 0000:00:1a.1: PCI INT B -> GSI 21
(level,
> low) ->
> > IRQ 21
> > > uhci_hcd
> > > > > 0000:00:1a.1: UHCI Host Controller
uhci_hcd
> > 0000:00:1a.1:
> > > new USB
> > > > bus
> > > > > registered, assigned bus number 4
uhci_hcd
> > 0000:00:1a.1:
> > > irq 21,
> > > > io base
> > > > > 0x000020c0 usb usb4: New USB
device
found,
> > idVendor=1d6b,
> > > > idProduct=0001
> > > > > usb usb4: New USB device strings:
Mfr=3,
> Product=2,
> > > > SerialNumber=1 usb
> > > > > usb4: Product: UHCI Host
Controller
usb
> usb4:
> > > Manufacturer: Linux
> > > > > 2.6.32.9 uhci_hcd usb usb4:
SerialNumber:
> > 0000:00:1a.1 usb
> > > usb4:
> > > > > configuration #1 chosen from 1
choice
hub
> 4-0:1.0:
> > USB hub
> > > found
> > > > hub
> > > > > 4-0:1.0: 2 ports detected
xen_allocate_pirq:
> > returning irq
> > > 19 for
> > > > gsi 19
> > > > > Already setup the GSI :19 uhci_hcd
> 0000:00:1a.2:
> > PCI INT D
> > > -> GSI
> > > > 19
> > > > > (level, low) -> IRQ 19 uhci_hcd
> 0000:00:1a.2: UHCI
> > Host
> > > > Controller
> > > > > uhci_hcd 0000:00:1a.2: new USB bus
> registered,
> > assigned
> > > bus
> > > > number 5
> > > > > uhci_hcd 0000:00:1a.2: irq 19, io
base
> 0x000020a0
> > usb
> > > usb5: New
> > > > USB
> > > > > device found, idVendor=1d6b,
idProduct=0001
> usb
> > usb5: New
> > > USB
> > > > device
> > > > > strings: Mfr=3, Product=2,
SerialNumber=1
> usb usb5:
> > > Product: UHCI
> > > > Host
> > > > > Controller usb usb5: Manufacturer:
Linux
> 2.6.32.9
> > uhci_hcd
> > > usb
> > > > usb5:
> > > > > SerialNumber: 0000:00:1a.2 usb
usb5:
> configuration
> > #1
> > > chosen from
> > > > 1
> > > > > choice hub 5-0:1.0: USB hub found
hub
> 5-0:1.0: 2
> > ports
> > > detected
> > > > > xen_allocate_pirq: returning irq
23
for gsi
> 23
> > Already
> > > setup the
> > > > GSI :23
> > > > > uhci_hcd 0000:00:1d.0: PCI INT A
->
GSI 23
> (level,
> > low) ->
> > > IRQ 23
> > > > > uhci_hcd 0000:00:1d.0: UHCI Host
Controller
> > uhci_hcd
> > > > 0000:00:1d.0: new
> > > > > USB bus registered, assigned bus
number 6
> uhci_hcd
> > > 0000:00:1d.0:
> > > > irq 23,
> > > > > io base 0x00002080 usb usb6: New
USB
device
> found,
> > > idVendor=1d6b,
> > > > > idProduct=0001 usb usb6: New USB
device
> strings:
> > Mfr=3,
> > > > Product=2,
> > > > > SerialNumber=1 usb usb6: Product:
UHCI Host
> > Controller usb
> > > usb6:
> > > > > Manufacturer: Linux 2.6.32.9
uhci_hcd
usb
> usb6:
> > > SerialNumber:
> > > > > 0000:00:1d.0 usb usb6:
configuration
#1
> chosen from
> > 1
> > > choice hub
> > > > > 6-0:1.0: USB hub found hub
6-0:1.0: 2
ports
> > detected
> > > > xen_allocate_pirq:
> > > > > returning irq 19 for gsi 19
Already
setup
> the GSI
> > :19
> > > uhci_hcd
> > > > > 0000:00:1d.1: PCI INT B -> GSI 19
(level,
> low) ->
> > IRQ 19
> > > uhci_hcd
> > > > > 0000:00:1d.1: UHCI Host Controller
uhci_hcd
> > 0000:00:1d.1:
> > > new USB
> > > > bus
> > > > > registered, assigned bus number 7
uhci_hcd
> > 0000:00:1d.1:
> > > irq 19,
> > > > io base
> > > > > 0x00002060 usb usb7: New USB
device
found,
> > idVendor=1d6b,
> > > > idProduct=0001
> > > > > usb usb7: New USB device strings:
Mfr=3,
> Product=2,
> > > > SerialNumber=1 usb
> > > > > usb7: Product: UHCI Host
Controller
usb
> usb7:
> > > Manufacturer: Linux
> > > > > 2.6.32.9 uhci_hcd usb usb7:
SerialNumber:
> > 0000:00:1d.1 usb
> > > usb7:
> > > > > configuration #1 chosen from 1
choice
hub
> 7-0:1.0:
> > USB hub
> > > found
> > > > hub
> > > > > 7-0:1.0: 2 ports detected
xen_allocate_pirq:
> > returning irq
> > > 18 for
> > > > gsi 18
> > > > > Already setup the GSI :18 uhci_hcd
> 0000:00:1d.2:
> > PCI INT C
> > > -> GSI
> > > > 18
> > > > > (level, low) -> IRQ 18 uhci_hcd
> 0000:00:1d.2: UHCI
> > Host
> > > > Controller
> > > > > uhci_hcd 0000:00:1d.2: new USB bus
> registered,
> > assigned
> > > bus
> > > > number 8
> > > > > uhci_hcd 0000:00:1d.2: irq 18, io
base
> 0x00002040
> > usb
> > > usb8: New
> > > > USB
> > > > > device found, idVendor=1d6b,
idProduct=0001
> usb
> > usb8: New
> > > USB
> > > > device
> > > > > strings: Mfr=3, Product=2,
SerialNumber=1
> usb usb8:
> > > Product: UHCI
> > > > Host
> > >
> >
> > References
> >
> > Visible links
> > 1. mailto:[20][21]pasik@xxxxxx
> > 2. mailto:[21][22]pasik@xxxxxx
> > 3. mailto:[22][23]pasik@xxxxxx
> > 4. mailto:[23][24]pasik@xxxxxx
> > 5. mailto:[24][25]pasik@xxxxxx
> > 6.
>
[25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 7.
>
[26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 8. mailto:[27][28]pasik@xxxxxx
> > 9.
>
[28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 10.
>
[29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 11. mailto:[30][31]pasik@xxxxxx
> > 12. mailto:[31][32]pasik@xxxxxx
> > 13.
>
[32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 14.
>
[33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 15. mailto:[34][35]pasik@xxxxxx
> > 16.
>
[35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 17.
>
[36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 18. mailto:[37][38]pasik@xxxxxx
>
> References
>
> Visible links
> 1. mailto:[39]pasik@xxxxxx
> 2. mailto:[40]pasik@xxxxxx
> 3. mailto:[41]pasik@xxxxxx
> 4. mailto:[42]pasik@xxxxxx
> 5. mailto:[43]pasik@xxxxxx
> 6. mailto:[44]pasik@xxxxxx
> 7.
[45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 8.
[46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 9. mailto:[47]pasik@xxxxxx
> 10.
[48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 11.
[49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 12. mailto:[50]pasik@xxxxxx
> 13. mailto:[51]pasik@xxxxxx
> 14.
[52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 15.
[53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 16. mailto:[54]pasik@xxxxxx
> 17.
[55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 18.
[56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 19. mailto:[57]pasik@xxxxxx
> 20. mailto:[58]pasik@xxxxxx
> 21. mailto:[59]pasik@xxxxxx
> 22. mailto:[60]pasik@xxxxxx
> 23. mailto:[61]pasik@xxxxxx
> 24. mailto:[62]pasik@xxxxxx
> 25.
[63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 26.
[64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 27. mailto:[65]pasik@xxxxxx
> 28.
[66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 29.
[67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 30. mailto:[68]pasik@xxxxxx
> 31. mailto:[69]pasik@xxxxxx
> 32.
[70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 33.
[71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 34. mailto:[72]pasik@xxxxxx
> 35.
[73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 36.
[74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 37. mailto:[75]pasik@xxxxxx
References
Visible links
1. mailto:pasik@xxxxxx
2. mailto:pasik@xxxxxx
3. mailto:pasik@xxxxxx
4. mailto:pasik@xxxxxx
5. mailto:pasik@xxxxxx
6. mailto:pasik@xxxxxx
7. mailto:pasik@xxxxxx
8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
9.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
10. mailto:pasik@xxxxxx
11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
12.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
13. mailto:pasik@xxxxxx
14. mailto:pasik@xxxxxx
15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
16.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
17. mailto:pasik@xxxxxx
18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
19.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
20. mailto:pasik@xxxxxx
21. mailto:pasik@xxxxxx
22. mailto:pasik@xxxxxx
23. mailto:pasik@xxxxxx
24. mailto:pasik@xxxxxx
25. mailto:pasik@xxxxxx
26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
27.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
28. mailto:pasik@xxxxxx
29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
30.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
31. mailto:pasik@xxxxxx
32. mailto:pasik@xxxxxx
33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
34.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
35. mailto:pasik@xxxxxx
36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
37.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
38. mailto:pasik@xxxxxx
39. mailto:pasik@xxxxxx
40. mailto:pasik@xxxxxx
41. mailto:pasik@xxxxxx
42. mailto:pasik@xxxxxx
43. mailto:pasik@xxxxxx
44. mailto:pasik@xxxxxx
45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
46.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
47. mailto:pasik@xxxxxx
48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
49.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
50. mailto:pasik@xxxxxx
51. mailto:pasik@xxxxxx
52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
53.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
54. mailto:pasik@xxxxxx
55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
56.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
57. mailto:pasik@xxxxxx
58. mailto:pasik@xxxxxx
59. mailto:pasik@xxxxxx
60. mailto:pasik@xxxxxx
61. mailto:pasik@xxxxxx
62. mailto:pasik@xxxxxx
63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
64.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
65. mailto:pasik@xxxxxx
66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
67.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
68. mailto:pasik@xxxxxx
69. mailto:pasik@xxxxxx
70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
71.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
72. mailto:pasik@xxxxxx
73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
74.
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
75. mailto:pasik@xxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9, (continued)
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9, kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(),
Jeremy Fitzhardinge <=
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Konrad Rzeszutek Wilk
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
|
|
|
Home