> But no luck. I did try removing both 'ioemu' and '
> Error: Device (769) could not be connected. Backend devices not found.
Hmmm... you said 768 last time. Was one of those a typo?
> Still is the problem.
> I have attached Xen start-up log, xm file along with this email...
> My kernel is 2.6.16-33, Xen-3.0.3/3.0.4.. If that helps..
> Note, I am booting from a USB/LILO combo and not from the hard-disk...
> I do have enough loop devices, compiled into the kernel..
> -----Original Message-----
> From: M.A. Williamson [mailto:maw48@xxxxxxxxxxxxxxxx] On Behalf Of Mark
> Sent: Saturday, March 10, 2007 12:54 PM
> To: xen-devel@xxxxxxxxxxxxxxxxxxx
> Cc: Kaushik Barde; Petersson, Mats
> Subject: Re: [Xen-devel] XP: VBD could not connect to backend device:USB
> Well, as Mats said, it would seem that some fundamental setup is
> somewhere. Gosh, that does sound a bit vague of me, sorry!
> I take it you've checked the disk images (e.g. /root/xenimages/hd.img)
> mounted at the correct positions. You don't need the ioemu: syntax
> so try removing that.
> Finally, you could try removing the CDROM argument to simplify the
> although this shouldn't make a difference! (I don't believe the problem
> with the CD-ROM itself - the error suggests hda can't connect).
> I'm sorry I don't have anything more specific to suggest right now - but
> looks like it ought to be fixable, anyhow. Hopefully we can figure it
> On Friday 09 March 2007 17:16, Kaushik Barde wrote:
> > Thanks Mats,
> > We also tried looking at xm logs but could not see anything obvious.
> > Attached are our hvm files..
> > Please advise..
> > Best.
> > -Kaushik
> > -----Original Message-----
> > From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx]
> > Sent: Friday, March 09, 2007 8:53 AM
> > To: Kaushik Barde; xen-devel@xxxxxxxxxxxxxxxxxxx
> > Subject: RE: [Xen-devel] XP: VBD could not connect to backend
> > boot
> > > -----Original Message-----
> > > From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> > > [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> > > Kaushik Barde
> > > Sent: 09 March 2007 16:48
> > > To: xen-devel@xxxxxxxxxxxxxxxxxxx
> > > Subject: [Xen-devel] XP: VBD could not connect to backend
> > > device: USB boot
> > >
> > > Hi:
> > >
> > > we have following setup:
> > >
> > > 1. 2.6.16-33-based Xen 3.0.3/Xen-3.0.4 DOM-0 kernels.
> > > 2. Using LILO-mbootpack from USB we boot Xen-->DOM-0 setup
> > > 3. We mount harddisk and try to install xp.hvm
> > >
> > > While,we are successful with FCs as DOM-U, for XP we get, VBD
> > > (768) could not be connected.
> > But there's obviously something else wrong, as the conection of the
> > happens LONG before the OS is loaded, so the fact that you're using XP
> > doesn't make any difference at all.
> > Can you post a configuration file for the XP domain (strip comments
> > empty lines please).
> > --
> > Mats
Dave: Just a question. What use is a unicyle with no seat? And no pedals!
Mark: To answer a question with a question: What use is a skateboard?
Dave: Skateboards have wheels.
Mark: My wheel has a wheel!
Xen-devel mailing list