|   | 
      | 
  
  
      | 
      | 
  
 
     | 
    | 
  
  
     | 
    | 
  
  
    |   | 
      | 
  
  
    | 
         
xen-devel
Re: [Xen-devel] Serial console problem with Xen 3.0
 
Stephen C. Tweedie wrote:
 
On Wed, 2006-04-05 at 00:40 -0400, Amitayu Das wrote:
 
1. I can boot normal Linux FC4 kernel and direct its output to serial
console (and see the messages in a separate monitor) using the options
as mentioned in the grub.conf.
    If I do the exactly the same (meaning, whatever you can see as
uncommeted lines in the xen-related portion of the grub.conf),
    I can't see the messages in the separate monitor.
 
Right, because you commented out the xen.gz com1=... line, so there's no
HV serial console.  You need that enabled.
 
2. If I uncomment the third line in the following:
#       kernel /xen.gz dom0_mem=131072 com1=9600,8n1
 
 
 
then Xen even does not boot up.
 
 
I've seen this a lot --- for me, adding "sync_console" to that xen.gz
line cures it.  Does that help for you?
 
 
 Me too. Adding "sync_console" at least repaired the console *output*. I 
still have the problem that keyboard input does not reach linux, as it 
seems. Here is my config:
serial --unit=0 --speed=38400 --word=8 --parity=no --stop=1
terminal --timeout=10 serial console
title CentOS (2.6.16-2.EL4xen0)
       root (hd0,0)
       kernel /xen.gz-2.6.16-2.EL4 com1=38400,8n1 conswitch=s sync_console
       module /vmlinuz-2.6.16-2.EL4xen0 ro root=LABEL=/1 console=tty0 
console=ttyS0,38400n8
       module /initrd-2.6.16-2.EL4xen0.img
Using the same config for native linux gives me a working console access 
(NB. I have agetty in inittab). In Xen/Linux I get all boot messages (from 
linux and Xen), but when I hit the login prompt, no keyboard input is 
excepted. I am using minicom on the other side of the cable.
 Additionally, pressing CTRL-A (or CTRL-S after changing the key) three times 
does *not* give me access to the Xen console.
 Any additional hints how I could get this working? (NB. this is 
xen-unstable, just a two days old, on x86 with an Intel 7210 board).
Best Regards,
 Michael Paesold 
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
 
 |   
 
 | 
    | 
  
  
    |   | 
    |