| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] AOE (Ata over ethernet) troubles on xen 2.0.6
If you have some spare time, could you please add this to
http://wiki.xensource.com/xenwiki/CoolConfigurations
It's another neat setup that people might want to play around with.
Cheers,
Mark
On Monday 25 July 2005 02:16, James Harper wrote:
> My setup is:
>
> Server1 - running vanilla debian install + vblade export. vblade is a
> userspace app so the kernel doesn't need anything special. A single
> partition is being exported, and while it is being used via lvm on the
> xen machines, Server1 itself knows nothing about lvm.
>
> Xen1 & Xen2 - running xen 2.0.6 with AoE compiled in. Boot via the
> network as they are diskless. Both run lvm on /dev/etherd/e0.0. I need
> to take care never to mount the same volume in more than one place. Bad
> things happen if I do that (unfortunately I know this from experience!).
> My volume names in lvm are things like 'mail-root', 'mail2-root',
> 'mail-swap', etc. the xen0 domains export those volumes to the other
> domains. The other domains don't use AoE directly. Migration works well
> as both xen machines can see all the lvm volumes.
>
> One of the xen machines has a 1Gb network adapter and a 100Mb adapter.
> The 1G has no ip address and is simply used for AoE. The other network
> adapter uses vlan's to service 3 other networks.
>
> The other xen machine has only two 100Mb adapters but is otherwise
> configured much the same.
>
> Hope that tells you what you want to know!
>
> James
>
> > -----Original Message-----
> > From: Kristinn Soffanias Runarsson [mailto:soffanias@xxxxxxxxx]
> > Sent: Monday, 25 July 2005 10:37
> > To: James Harper
> > Cc: Jeb Campbell; xen-devel@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-devel] AOE (Ata over ethernet) troubles on xen 2.0.6
> >
> > Hi James, could you explain this setup in some detail?
> >
> > Bestestest regards from Iceland
> >
> > -soffi-
> >
> > On 7/23/05, James Harper <james.harper@xxxxxxxxxxxxxxxx> wrote:
> > > For what it's worth, I'm using aoe presently without any problems,
>
> and
>
> > > have been for quite a few months now. In my setup I have vblade
>
> running
>
> > > on a server, with dom0's on two machines reading the same aoe
>
> device,
>
> > > and exporting lvm partitions to the different domains as required.
>
> This
>
> > > allows migration to work nicely.
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home