|
xen-users
Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_I
|
xend was not running so I did below steps and rebooted. The system did not boot up. SO I removed the line added in /proc/fstab and again rebooted. Attached is the captured file. Can you please let me know what is going wrong again?
step 1. I loaded the xen-evtchn.ko by insmod.
step 2: And added the below line in /proc/fstab.
none /proc/xen xenfs defaults 0 0
Thanks
On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote:
> Attached is the captured file.
>
> Now the machine booted up. :) 2.6.32.10 is booted.
>
> But I dont see xen up and running.
>
> Whe I open Virtual Machine Manager I dont see xen running. (ATTACHED IS
> THE SCREEN SHOT).
>
- Do you have /proc/xen (xenfs) mounted?
- Do you have xen-evtchn driver module loaded in dom0?
- Do you have xend running?
Please see and read this wiki page:
http://wiki.xensource.com/xenwiki/XenParavirtOps
It explains the other configurations you need to do for Xen/xend to actually work.
Anyway, the problem for you was wrong grub.conf root= option for the dom0 kernel.
-- Pasi
> On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
> On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote:
> > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote:
> >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote:
> >>
> >>> Attached is the capture log after changing the grub.conf to
> >>>
> >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen
> nomodeset
> >>> initcall_debug debug swiotlb=force apic=debug loglevel=10
> >>>
> >>> for the dom 0 kernel command line.
> >>>
> >>>
> >> Hmm, interesting. Now it seems to crash in a different place.
> >>
> >> Jeremy: Have you seen this one earlier?
> >>
> >
> > No, but it looks like the result of "apic=debug" on the kernel command
> > line. That won't do anything useful (the kernel has no APICs, they
> all
> > belong to Xen), and can only cause harm. As it appears to have done.
> >
>
> Ok, my bad.
>
> So please remove the "apic=debug" from the dom0 kernel cmdline and try
> again.
> It should look like this:
>
> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset
> initcall_debug debug loglevel=10
>
> -- Pasi
>
> > J
> >
> >> .... IRQ redirection table:
> >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> >> 00 000 0 0 0 0 0 0 0 00
> >> IRQ to pin mappings:
> >> BUG: unable to handle kernel NULL pointer dereference at (null)
> >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
> >> PGD 0
> >> Oops: 0000 [#1] SMP
> >> last sysfs file:
> >> CPU 0
> >> Modules linked in:
> >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2
> >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>]
> print_all_ICs+0x487/0x500
> >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286
> >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01
> >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000
> >> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000
> >> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000
> >> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000)
> knlGS:0000000000000000
> >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> >> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660
> >> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> >> Process swapper (pid: 1, threadinfo ffff880064eda000, task
> ffff880064ee0000)
> >> Stack:
> >> ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8
> >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002
> 0000000000000002
> >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660
> 00000000291fd332
> >> Call Trace:
> >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
> >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
> >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
> >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
> >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
> >> [<ffffffff81013eaa>] child_rip+0xa/0x20
> >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
> >> [<ffffffff81013810>] ? restore_args+0x0/0x30
> >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
> >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
> >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8
> 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48>
> 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4
> >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
> >> RSP<ffff880064edbe20>
> >> CR2: 0000000000000000
> >> ---[ end trace 0007ad9d59420718 ]---
> >> swapper used greatest stack depth: 4168 bytes left
> >> Kernel panic - not syncing: Attempted to kill init!
> >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2
> >> Call Trace:
> >> [<ffffffff8105b747>] panic+0xa5/0x167
> >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
> >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701
> >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1
> >> [<ffffffff8108f823>] ? lock_release+0x179/0x184
> >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
> >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
> >> [<ffffffff8105efa7>] do_exit+0x7e/0x701
> >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
> >> [<ffffffff8147764c>] oops_end+0xbf/0xc7
> >> [<ffffffff81038a02>] no_context+0x1f1/0x200
> >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
> >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4
> >> [<ffffffff8100f452>] ? check_events+0x12/0x20
> >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15
> >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2
> >> [<ffffffff814769d5>] page_fault+0x25/0x30
> >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500
> >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
> >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
> >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
> >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
> >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
> >> [<ffffffff81013eaa>] child_rip+0xa/0x20
> >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
> >> [<ffffffff81013810>] ? restore_args+0x0/0x30
> >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
> >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
> >>
> >>
> >> -- Pasi
> >>
> >>
> >>
> >>>
> >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi
> Kärkkäinen<[1][2]pasik@xxxxxx> wrote:
> >>>
> >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote:
> >>> > pvdisplay does not work in my RHEL machine.
> >>> >
> >>> > I did pvscan.
> >>> > below is the output.
> >>> >
> >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free]
> >>> >
> >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG:
> 0 [0 ]
> >>> >
> >>>
> >>> Ok so /dev/sda2 is the correct device holding the VolGroup01.
> >>>
> >>> Looking at your latest capture.doc I see this:
> >>>
> >>> Command line: ro root=/dev/vg00/lv01 console=hvc0
> earlyprintk=xen
> >>> nomodeset initcall_debug debug swiotlb=force apic=debug
> loglevel=10
> >>>
> >>> So your root= parameter is wrong! Edit grub.conf and replace
> it with the
> >>> actual root device:
> >>> root=/dev/VolGroup01/LogVol00
> >>>
> >>> -- Pasi
> >>>
> >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen
> >>> <[1][2][3]pasik@xxxxxx> wrote:
> >>> >
> >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore
> kumar wrote:
> >>> > > I did the below steps for pvops dom 0 kernel.
> >>> > >
> >>> > > make menuconfig
> >>> > > make bzImage
> >>> > > make modules
> >>> > > make modules_install
> >>> > > cp -a .config /boot/config-2.6.32.10
> >>> > > cp -a System.map /boot/System.map-2.6.32.10
> >>> > > cp -a arch/x86/boot/bzImage
> /boot/vmlinuz-2.6.32.10
> >>> > > /sbin/mkinitrd -f --builtin=ahci
> /boot/initrd-2.6.32.10.img
> >>> > 2.6.32.10
> >>> > > I tried root=/dev/VolGroup01/LogVol00 .
> >>> > >
> >>> >
> >>> > Ok.
> >>> >
> >>> > Please run "pvdisplay" to see which actual partition
> is the LVM
> >>> PV for
> >>> > your
> >>> > volume group.
> >>> >
> >>> > Also if you're running Fedora 12 you could try
> generating an
> >>> initrd
> >>> > image
> >>> > with dracut instead of mkinitrd.
> >>> >
> >>> > -- Pasi
> >>> >
> >>> > >
> >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen
> >>> > <[1][2][3][4]pasik@xxxxxx> wrote:
> >>> > >
> >>> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700,
> kishore kumar
> >>> wrote:
> >>> > > > Here is the output of df -h and cat
> /etc/fstab of my
> >>> > machine.
> >>> > > >
> >>> > >
> >>> > > Did you try both
> root=/dev/mapper/VolGroup01-LogVol00 and
> >>> > > root=/dev/VolGroup01/LogVol00 arguments for
> the dom0
> >>> kernel?
> >>> > >
> >>> > > How did you generate the initrd image for the
> dom0 kernel?
> >>> > >
> >>> > > Anyway this sounds like a grub.conf or initrd
> problem, not
> >>> Xen or
> >>> > pvops
> >>> > > dom0 kernel kernel problem.
> >>> > >
> >>> > > -- Pasi
> >>> > >
> >>> > > > Please let me know your thoughts.
> >>> > > >
> >>> > > > [root@localhost kishore]# df -h
> >>> > > >
> >>> > > > Filesystem Size Used Avail Use% Mounted
> on
> >>> > > >
> >>> > > > /dev/mapper/VolGroup01-LogVol00
> >>> > > >
> >>> > > > 223G
> 29G 182G 14%
> >>> /
> >>> > > >
> >>> > > > /dev/sda1 99M 81M 13M 87% /boot
> >>> > > >
> >>> > > > tmpfs 757M 0 757M 0% /dev/shm
> >>> > > >
> >>> > > > [root@localhost kishore]# cat /etc/fstab
> >>> > > >
> >>> > > > /dev/VolGroup01/LogVol00 / ext3 defaults
> 1 1
> >>> > > >
> >>> > > > LABEL=/boot /boot ext3 defaults 1 2
> >>> > > >
> >>> > > > tmpfs /dev/shm tmpfs defaults 0 0
> >>> > > >
> >>> > > > devpts /dev/pts devpts gid=5,mode=620 0
> 0
> >>> > > >
> >>> > > > sysfs /sys sysfs defaults 0 0
> >>> > > >
> >>> > > > proc /proc proc defaults 0 0
> >>> > > >
> >>> > > > /dev/VolGroup01/LogVol01 swap swap
> defaults 0 0
> >>> > > >
> >>> > > > [root@localhost kishore]#
> >>> > > >
> >>> > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi
> Kärkkäinen
> >>> > > <[1][2][3][4][5]pasik@xxxxxx> wrote:
> >>> > > >
> >>> > > > On Tue, Mar 16, 2010 at 03:40:46PM
> -0700, kishore
> >>> kumar
> >>> > wrote:
> >>> > > > > I am not sure. Can you please
> let me know how
> >>> to
> >>> > check
> >>> > > this? any
> >>> > > > command
> >>> > > > > ??
> >>> > > >
> >>> > > > well simple "df -h" will show it. and
> also "cat
> >>> > /etc/fstab".
> >>> > > > You can also check it from your grub
> >>> configuration.. from
> >>> > the
> >>> > > working
> >>> > > > baremetal (non-Xen) entry.
> >>> > > >
> >>> > > > -- Pasi
> >>> > > > >
> >>> > > > > On Tue, Mar 16, 2010 at 3:29 PM,
> Pasi
> >>> Kärkkäinen
> >>> > > > <[1][2][3][4][5][6]pasik@xxxxxx>
> wrote:
> >>> > > > >
> >>> > > > > On Tue, Mar 16, 2010 at
> 03:22:50PM -0700,
> >>> kishore
> >>> > kumar
> >>> > > wrote:
> >>> > > > > > attached is the log
> captured in with
> >>> the word
> >>> > > document .
> >>> > > > > >
> >>> > > > >
> >>> > > > > Scanning logical volumes
> >>> > > > > Reading all physical volumes.
> This may
> >>> take a
> >>> > while...
> >>> > > > > Activating logical volumes
> >>> > > > > Volume group "VolGroup01" not
> found
> >>> > > > > Trying to resume from
> >>> /dev/VolGroup01/LogVol01
> >>> > > > > Unable to access resume device
> >>> > (/dev/VolGroup01/LogVol01)
> >>> > > > > Creating root device.
> >>> > > > > Mounting root filesystem.
> >>> > > > > mount: could not find
> filesystem '/dev/root'
> >>> > > > > Setting up other filesystems.
> >>> > > > > Setting up new root fs
> >>> > > > > setuproot: moving /dev failed:
> No such file
> >>> or
> >>> > directory
> >>> > > > > no fstab.sys, mounting
> internal defaults
> >>> > > > > setuproot: error mounting
> /proc: No such
> >>> file or
> >>> > directory
> >>> > > > > setuproot: error mounting
> /sys: No such file
> >>> or
> >>> > directory
> >>> > > > > Switching to new root and
> running init.
> >>> > > > > unmounting old /dev
> >>> > > > > unmounting old /proc
> >>> > > > > unmounting old /sys
> >>> > > > > switchroot: mount failed: No
> such file or
> >>> directory
> >>> > > > > init used greatest stack
> depth: 4088 bytes
> >>> left
> >>> > > > > Kernel panic - not syncing:
> Attempted to
> >>> kill init!
> >>> > > > >
> >>> > > > > So it seems it gets all the
> way to executing
> >>> the
> >>> > initrd
> >>> > > image,
> >>> > > > > which then fails to mount the
> root fs.
> >>> > > > >
> >>> > > > > Earlier in the log:
> >>> > > > > ata1: SATA link up 3.0 Gbps
> (SStatus 123
> >>> SControl
> >>> > 300)
> >>> > > > > ata1.00: ATA-8: Hitachi
> HDT721025SLA380,
> >>> STBOA3AA,
> >>> > max
> >>> > > UDMA/133
> >>> > > > > ata1.00: 488397168 sectors,
> multi 0: LBA48
> >>> NCQ
> >>> > (depth
> >>> > > 31/32), AA
> >>> > > > > ata1.00: configured for
> UDMA/133
> >>> > > > > scsi 0:0:0:0: Direct-Access
> ATA
> >>> Hitachi
> >>> > HDT72102
> >>> > > STBO
> >>> > > > PQ: 0
> >>> > > > > ANSI: 5
> >>> > > > > sd 0:0:0:0: Attached scsi
> generic sg0 type 0
> >>> > > > > sd 0:0:0:0: [sda] 488397168
> 512-byte logical
> >>> > blocks: (250
> >>> > > GB/232
> >>> > > > GiB)
> >>> > > > > sd 0:0:0:0: [sda] Write
> Protect is off
> >>> > > > > sd 0:0:0:0: [sda] Mode Sense:
> 00 3a 00 00
> >>> > > > > sd 0:0:0:0: [sda] Write cache:
> enabled, read
> >>> cache:
> >>> > > enabled,
> >>> > > > doesn't
> >>> > > > > support DPO or FUA
> >>> > > > > sda: sda1 sda2
> >>> > > > > sd 0:0:0:0: [sda] Attached
> SCSI disk
> >>> > > > >
> >>> > > > > so /dev/sda was detected. Is
> your root lvm
> >>> volume
> >>> > on
> >>> > > /dev/sda ?
> >>> > > > > Is /dev/VolGroup01/LogVol01
> really your root
> >>> fs?
> >>> > > > >
> >>> > > > > -- Pasi
> >>> > > > >
> >>> > > > > >
> >>> > > > > >
> >>> > > > > > On Tue, Mar 16, 2010 at
> 3:03 PM, Pasi
> >>> > Kärkkäinen
> >>> > > > >
> <[1][2][3][4][5][6][7]pasik@xxxxxx> wrote:
> >>> > > > > >
> >>> > > > > > On Tue, Mar 16, 2010
> at 02:56:06PM
> >>> -0700,
> >>> > kishore
> >>> > > kumar
> >>> > > > wrote:
> >>> > > > > > > Please find the
> attached log
> >>> file after
> >>> > fixing
> >>> > > the
> >>> > > > dom 0
> >>> > > > > kernel cmd
> >>> > > > > > line
> >>> > > > > > > as below
> >>> > > > > > >
> >>> > > > > > > ro
> root=/dev/VolGroup01/LogVol00
> >>> > console=hvc0
> >>> > > > > earlyprintk=xen
> >>> > > > > > nomodeset
> >>> > > > > > >
> >>> > > > > >
> >>> > > > > > There's something
> wrong with the log,
> >>> the
> >>> > dom0
> >>> > > kernel
> >>> > > > parts are
> >>> > > > > all on
> >>> > > > > > one line..
> >>> > > > > > It's really difficult
> to read it.
> >>> > > > > >
> >>> > > > > > -- Pasi
> >>> > > > > >
> >>> > > > > > > Thanks
> >>> > > > > > >
> >>> > > > > > >
> >>> > > > > > > On Tue, Mar 16,
> 2010 at 2:29 PM,
> >>> Pasi
> >>> > > Kärkkäinen
> >>> > > > > >
> <[1][2][3][4][5][6][7][8]pasik@xxxxxx>
> >>> wrote:
> >>> > > > > > >
> >>> > > > > > > On Tue, Mar
> 16, 2010 at
> >>> 02:16:22PM
> >>> > -0700,
> >>> > > kishore
> >>> > > > kumar
> >>> > > > > wrote:
> >>> > > > > > > > I did
> below steps.
> >>> > > > > > > >
> >>> > > > > > > >
> >>> > > > > > > > I
> pulled DOM 0 kernel
> >>> from
> >>> > > > > > > > git
> clone
> >>> > > > > > >
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> git://[1][2][3][4][5][6][7][8][9]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > > > > > >
> linux-2.6-xen
> >>> > > > > > > >
> >>> > > > > > > > cd
> linux-2.6-xen
> >>> > > > > > > >
> >>> > > > > > > > make
> clean
> >>> > > > > > > >
> >>> > > > > > > > cp -a
> .config .config-old
> >>> > > > > > > >
> >>> > > > > > > > wget -O
> .config
> >>> > > > > > > >
> >>> > > > > > >
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> [2][3][4][5][6][7][8][9][10]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > > > > > >
> >>> > > > > > > > make
> oldconfig
> >>> > > > > > > >
> >>> > > > > > > > make
> bzImage
> >>> > > > > > > >
> >>> > > > > > > > make
> modules
> >>> > > > > > > >
> >>> > > > > > > > make
> modules_install
> >>> > > > > > > >
> >>> > > > > > > > cp -a
> .config
> >>> > /boot/config-2.6.32.9
> >>> > > > > > > >
> >>> > > > > > > > cp -a
> System.map
> >>> > > /boot/System.map-2.6.32.9
> >>> > > > > > > >
> >>> > > > > > > > cp -a
> >>> arch/x86/boot/bzImage
> >>> > > > /boot/vmlinuz-2.6.32.9
> >>> > > > > > > >
> >>> > > > > > > > and
> modified the
> >>> grub.conf as
> >>> > below
> >>> > > > > > > >
> >>> > > > > > > >
> >>> > > > > > > >
> Root(hd0,0)
> >>> > > > > > > >
> >>> > > > > > > > kernel
> /xen.gz
> >>> console=vga,com1
> >>> > > > com1=115200,8n1
> >>> > > > > msi=1
> >>> > > > > > iommu=1
> >>> > > > > > > >
> >>> > > > > > > > module
> /vmlinuz-2.6.32.9
> >>> ro
> >>> > > > > root=/dev/VolGroup01/LogVo100
> >>> > > > > > rhgb
> >>> > > > > > > quiet
> >>> > > > > > > >
> >>> > > > > > > > module
> >>> /initrd-2.6.32.9.img
> >>> > > > > > > >
> >>> > > > > > > >
> >>> > > > > > > > and
> rebooted the machine.
> >>> Then
> >>> > It
> >>> > > booted with
> >>> > > > some
> >>> > > > > xen
> >>> > > > > > messages
> >>> > > > > > > and
> >>> > > > > > > > stopped.
> Those were the
> >>> > messages
> >>> > > captured
> >>> > > > from
> >>> > > > > serial
> >>> > > > > > console.
> >>> > > > > > > >
> >>> > > > > > > > Please
> let me know if I
> >>> did
> >>> > something
> >>> > > wrong
> >>> > > > here.
> >>> > > > > > > >
> >>> > > > > > >
> >>> > > > > > > Please fix the
> kernel cmdline
> >>> based
> >>> > on my
> >>> > > earlier
> >>> > > > email,
> >>> > > > > and
> >>> > > > > > capture and
> >>> > > > > > > post the
> >>> > > > > > > serial console
> log again!
> >>> > > > > > >
> >>> > > > > > > -- Pasi
> >>> > > > > > > >
> >>> > > > > > > >
> >>> > > > > > > > On Tue,
> Mar 16, 2010 at
> >>> 1:20 PM,
> >>> > Pasi
> >>> > > > Kärkkäinen
> >>> > > > > > >
> >>> <[3][4][5][6][7][8][9][10][11]pasik@xxxxxx>
> >>> > wrote:
> >>> > > > > > > >
> >>> > > > > > > > On
> Tue, Mar 16, 2010 at
> >>> > 01:16:28PM
> >>> > > -0700,
> >>> > > > Jeremy
> >>> > > > > > Fitzhardinge
> >>> > > > > > > wrote:
> >>> > > > > > > > > On
> 03/16/2010 12:48
> >>> PM, Pasi
> >>> > > Kärkkäinen
> >>> > > > wrote:
> >>> > > > > > > > >> On
> Tue, Mar 16, 2010
> >>> at
> >>> > 09:43:44PM
> >>> > > +0200,
> >>> > > > Pasi
> >>> > > > > > Kärkkäinen
> >>> > > > > > > wrote:
> >>> > > > > > > > >>
> >>> > > > > > > > >>>
> On Tue, Mar 16,
> >>> 2010 at
> >>> > > 10:32:17AM
> >>> > > > -0700,
> >>> > > > > kishore
> >>> > > > > > kumar
> >>> > > > > > > wrote:
> >>> > > > > > > > >>>
> >>> > > > > > > > >>>>
> Attached is
> >>> the
> >>> > output
> >>> > > captured
> >>> > > > from
> >>> > > > > serial
> >>> > > > > > console.
> >>> > > > > > > > >>>>
> >>> > > > > > > > >>>>
> Machine does
> >>> not boot
> >>> > after
> >>> > > > compiling xen
> >>> > > > > 3.4.3
> >>> > > > > > with
> >>> > > > > > > pv_ops dom
> >>> > > > > > > > 0
> kernel.
> >>> > > > > > > > >>>>
> >>> > > > > > > > >>>>
> Please let me
> >>> know
> >>> > what is
> >>> > > going
> >>> > > > wrong
> >>> > > > > here.
> >>> > > > > > > > >>>>
> >>> > > > > > > > >>>>
> >>> > > > > > > > >>>
> Ok this looks like
> >>> a bug
> >>> > that is
> >>> > > already
> >>> > > > being
> >>> > > > > sorted
> >>> > > > > > out on
> >>> > > > > > > >
> xen-devel mailinglist.
> >>> > > > > > > > >>> I
> added CC to
> >>> xen-devel.
> >>> > > > > > > > >>>
> >>> > > > > > > > >>>
> >>> > > > > > > > >>
> >>> > > > > > > > >
> >>> > > > > > > > >
> Those messages are
> >>> not a
> >>> > problem in
> >>> > > > themselves,
> >>> > > > > but the
> >>> > > > > > related
> >>> > > > > > > >
> problem
> >>> > > > > > > > > is
> believed to be
> >>> fixed in
> >>> > current
> >>> > > > > xen/stable-2.6.32.x.
> >>> > > > > > It
> >>> > > > > > > looks like
> >>> > > > > > > > > the
> output stops
> >>> there
> >>> > because the
> >>> > > Xen
> >>> > > > console
> >>> > > > > isn't set
> >>> > > > > > up
> >>> > > > > > > properly
> >>> > > > > > > > for
> >>> > > > > > > > >
> some reason.
> >>> > > > > > > > >
> >>> > > > > > > >
> >>> > > > > > > > Yeah,
> remove "rhgb
> >>> quiet" from
> >>> > the
> >>> > > options..
> >>> > > > the
> >>> > > > > dom0
> >>> > > > > > kernel
> >>> > > > > > > cmdline
> >>> > > > > > > > should
> be like this:
> >>> > > > > > > > ro
> >>> > root=/dev/VolGroup01/LogVol00
> >>> > > > console=hvc0
> >>> > > > > > earlyprintk=xen
> >>> > > > > > > nomodeset
> >>> > > > > > > > --
> Pasi
> >>> > > > > > > >
> >>> > > > > > > > References
> >>> > > > > > > >
> >>> > > > > > > > Visible
> links
> >>> > > > > > > > 1.
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> [5][6][7][8][9][10][11][12]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > > > > > > 2.
> >>> > > > > > >
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> [6][7][8][9][10][11][12][13]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > > > > > > 3.
> >>> > mailto:[7][8][9][10][11][12][13][14]pasik@xxxxxx
> >>> > > > > > >
> >>> > > > > > > References
> >>> > > > > > >
> >>> > > > > > > Visible links
> >>> > > > > > > 1.
> >>> > mailto:[9][10][11][12][13][14][15]pasik@xxxxxx
> >>> > > > > > > 2.
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> [10][11][12][13][14][15][16]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > > > > > 3.
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> [11][12][13][14][15][16][17]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > > > > > 4.
> >>> > mailto:[12][13][14][15][16][17][18]pasik@xxxxxx
> >>> > > > > > > 5.
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> [13][14][15][16][17][18][19]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > > > > > 6.
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>>
> [14][15][16][17][18][19][20]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > > > > > 7.
> >>> > mailto:[15][16][17][18][19][20][21]pasik@xxxxxx
> >>> > > > > > > Asserting Post
> complete GPIO!!!
> >>> > > > > > > Transfer control to
> CSM 16-bit
> >>> binary for
> >>> > legacy
> >>> > > boot
> >>> > > > > > > __ __
> _____ _ _
> >>> _____
> >>> > > _ _
> >>> > > > > > > \ \/ /___ _ __
> |___ /| || |
> >>> |___ /
> >>> > _ __
> >>> > > ___| || |
> >>> > > > _
> >>> > > > > __ _
> >>> > > > > > __ ___
> >>> > > > > > > \ // _ \ '_ \
> |_ \| || |_
> >>> |_ \ __|
> >>> > '__/
> >>> > > __| ||
> >>> > > > |_ __|
> >>> > > > > '_ \|
> >>> > > > > > '__/ _ \
> >>> > > > > > > / \ __/ | | |
> ___) |__ _|
> >>> ___) |__|
> >>> > | |
> >>> > > (__|__
> >>> > > > _|__|
> >>> > > > > |_) | |
> >>> > > > > > | __/
> >>> > > > > > > /_/\_\___|_| |_|
> |____(_)
> >>> |_|(_)____/
> >>> > |_|
> >>> > > \___| |_|
> >>> > > > |
> >>> > > > > .__/|_|
> >>> > > > > > \___|
> >>> > > > > > >
> >>> > > > |_|
> >>> > > > > > > (XEN) Xen version
> 3.4.3-rc4-pre
> >>> > > (kishore@localdomain)
> >>> > > > (gcc
> >>> > > > > version
> >>> > > > > > 4.1.2 20080704 (Red
> Hat 4.1.2-46))
> >>> Mon Mar
> >>> > 15
> >>> > > 13:44:31 PDT
> >>> > > > 2010
> >>> > > > > > > (XEN) Latest
> ChangeSet: Tue Mar 09
> >>> > 18:15:52 2010
> >>> > > +0000
> >>> > > > > > 19924:6e72f8c3c017
> >>> > > > > > > (XEN) Command line:
> >>> console=vga,com1
> >>> > > com1=115200,8n1
> >>> > > > msi=1
> >>> > > > > iommu=1
> >>> > > > > > > (XEN) Video
> information:
> >>> > > > > > > (XEN) VGA is text
> mode 80x25, font
> >>> 8x16
> >>> > > > > > > (XEN) VBE/DDC
> methods: none; EDID
> >>> > transfer time:
> >>> > > 0
> >>> > > > seconds
> >>> > > > > > > (XEN) EDID info
> not retrieved
> >>> because no
> >>> > DDC
> >>> > > retrieval
> >>> > > > method
> >>> > > > > > detected
> >>> > > > > > > (XEN) Disc
> information:
> >>> > > > > > > (XEN) Found 1 MBR
> signatures
> >>> > > > > > > (XEN) Found 1 EDD
> information
> >>> structures
> >>> > > > > > > (XEN) Xen-e820 RAM
> map:
> >>> > > > > > > (XEN)
> 0000000000000000 -
> >>> 000000000009d000
> >>> > > (usable)
> >>> > > > > > > (XEN)
> 000000000009d000 -
> >>> 00000000000a0000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 00000000000e0000 -
> >>> 0000000000100000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 0000000000100000 -
> >>> 000000006d597000
> >>> > > (usable)
> >>> > > > > > > (XEN)
> 000000006d597000 -
> >>> 000000006d686000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 000000006d686000 -
> >>> 000000006f598000
> >>> > > (usable)
> >>> > > > > > > (XEN)
> 000000006f598000 -
> >>> 000000006f59a000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 000000006f59a000 -
> >>> 000000006f5af000
> >>> > (ACPI
> >>> > > NVS)
> >>> > > > > > > (XEN)
> 000000006f5af000 -
> >>> 000000006f5d9000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 000000006f5d9000 -
> >>> 000000006f5f9000
> >>> > (ACPI
> >>> > > data)
> >>> > > > > > > (XEN)
> 000000006f5f9000 -
> >>> 000000006f6df000
> >>> > (ACPI
> >>> > > NVS)
> >>> > > > > > > (XEN)
> 000000006f6df000 -
> >>> 000000006f700000
> >>> > (ACPI
> >>> > > data)
> >>> > > > > > > (XEN)
> 000000006f700000 -
> >>> 0000000080000000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 00000000a0000000 -
> >>> 00000000b0000000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 00000000fc000000 -
> >>> 00000000fd000000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 00000000fed1c000 -
> >>> 00000000fed20000
> >>> > > (reserved)
> >>> > > > > > > (XEN)
> 00000000ffc00000 -
> >>> 0000000100000000
> >>> > > (reserved)
> >>> > > > > > > (XEN) System RAM:
> 1780MB
> >>> (1823000kB)
> >>> > > > > > > (XEN) ACPI: RSDP
> 000F03F0, 0024 (r2
> >>> INTEL
> >>> > )
> >>> > > > > > > (XEN) ACPI: XSDT
> 6F6FE120, 0064 (r1
> >>> INTEL
> >>> > THRLY
> >>> > > > 0
> >>> > > > > > 1000013)
> >>> > > > > > > (XEN) ACPI: FACP
> 6F6FD000, 00F4 (r4
> >>> INTEL
> >>> > THRLY
> >>> > > > 0
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) ACPI: DSDT
> 6F6F5000, 74F1 (r2
> >>> INTEL
> >>> > THRLY
> >>> > > > 3
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) ACPI: FACS
> 6F5F9000, 0040
> >>> > > > > > > (XEN) ACPI: APIC
> 6F6F4000, 01CC (r2
> >>> INTEL
> >>> > THRLY
> >>> > > > 0
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) ACPI: MCFG
> 6F6F3000, 003C (r1
> >>> INTEL
> >>> > THRLY
> >>> > > > 1
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) ACPI: HPET
> 6F6F2000, 0038 (r1
> >>> INTEL
> >>> > THRLY
> >>> > > > 1
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) ACPI: SLIT
> 6F6F1000, 0030 (r1
> >>> INTEL
> >>> > THRLY
> >>> > > > 1
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) ACPI: WDDT
> 6F6F0000, 0040 (r1
> >>> INTEL
> >>> > THRLY
> >>> > > > 0
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) ACPI: SSDT
> 6F5D9000, 1FDDC
> >>> (r1
> >>> > INTEL SSDT
> >>> > > PM
> >>> > > > 4000
> >>> > > > > INTL
> >>> > > > > > 20061109)
> >>> > > > > > > (XEN) ACPI: DMAR
> 6F6EE000, 01D0 (r1
> >>> INTEL
> >>> > THRLY
> >>> > > > 1
> >>> > > > > MSFT
> >>> > > > > > 100000D)
> >>> > > > > > > (XEN) Domain heap
> initialised
> >>> > > > > > > (XEN) Processor #0
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #2
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #4
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #16
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #18
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #20
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #1
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #3
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #5
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #17
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #19
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) Processor #21
> 6:12 APIC
> >>> version 21
> >>> > > > > > > (XEN) IOAPIC[0]:
> apic_id 8, version
> >>> 32,
> >>> > address
> >>> > > > 0xfec00000, GSI
> >>> > > > > 0-23
> >>> > > > > > > (XEN) IOAPIC[1]:
> apic_id 9, version
> >>> 32,
> >>> > address
> >>> > > > 0xfec90000, GSI
> >>> > > > > 24-47
> >>> > > > > > > (XEN) Enabling APIC
> mode: Phys.
> >>> Using 2
> >>> > I/O
> >>> > > APICs
> >>> > > > > > > (XEN) Intel VT-d
> DMAR tables have
> >>> been
> >>> > parsed.
> >>> > > > > > > (XEN) Using
> scheduler: SMP Credit
> >>> > Scheduler
> >>> > > (credit)
> >>> > > > > > > (XEN) Detected
> 3200.207 MHz
> >>> processor.
> >>> > > > > > > (XEN) VMX:
> Supported advanced
> >>> features:
> >>> > > > > > > (XEN) - APIC MMIO
> access
> >>> virtualisation
> >>> > > > > > > (XEN) - APIC TPR
> shadow
> >>> > > > > > > (XEN) - Extended
> Page Tables (EPT)
> >>> > > > > > > (XEN) -
> Virtual-Processor
> >>> Identifiers
> >>> > (VPID)
> >>> > > > > > > (XEN) - Virtual
> NMI
> >>> > > > > > > (XEN) - MSR
> direct-access bitmap
> >>> > > > > > > (XEN) VMX: EPT is
> available.
> >>> > > > > > > (XEN) VMX: VPID is
> available.
> >>> > > > > > > (XEN) HVM: VMX
> enabled
> >>> > > > > > > (XEN) HVM: Hardware
> Assisted Paging
> >>> > detected.
> >>> > > > > > > (XEN) CPU0: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 1/2 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU1: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 2/4 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU2: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 3/16 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU3: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 4/18 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU4: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 5/20 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU5: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 6/1 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU6: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 7/3 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU7: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 8/5 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU8: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 9/17 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU9: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 10/19 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU10: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Booting
> processor 11/21 eip
> >>> 88000
> >>> > > > > > > (XEN) CPU11: Intel
> Genuine Intel(R)
> >>> CPU
> >>> > > 000
> >>> > > > @
> >>> > > > > 3.20GHz
> >>> > > > > > stepping 00
> >>> > > > > > > (XEN) Total of 12
> processors
> >>> activated.
> >>> > > > > > > (XEN) ENABLING
> IO-APIC IRQs
> >>> > > > > > > (XEN) -> Using
> new ACK method
> >>> > > > > > > (XEN) checking TSC
> synchronization
> >>> across
> >>> > 12
> >>> > > CPUs:
> >>> > > > passed.
> >>> > > > > > > (XEN) Platform
> timer is 14.318MHz
> >>> HPET
> >>> > > > > > > ?(XEN) Brought up
> 12 CPUs
> >>> > > > > > > (XEN) Intel VT-d
> Snoop Control
> >>> supported.
> >>> > > > > > > (XEN) Intel VT-d
> DMA Passthrough
> >>> not
> >>> > supported.
> >>> > > > > > > (XEN) Intel VT-d
> Queued
> >>> Invalidation
> >>> > supported.
> >>> > > > > > > (XEN) Intel VT-d
> Interrupt
> >>> Remapping
> >>> > supported.
> >>> > > > > > > (XEN) I/O
> virtualisation enabled
> >>> > > > > > > (XEN) I/O
> virtualisation for PV
> >>> guests
> >>> > disabled
> >>> > > > > > > (XEN) xenoprof:
> Initialization
> >>> failed.
> >>> > Intel
> >>> > > processor
> >>> > > > model 44
> >>> > > > > for P6
> >>> > > > > > class family is not
> supported
> >>> > > > > > > (XEN) *** LOADING
> DOMAIN 0 ***
> >>> > > > > > > (XEN) Xen kernel:
> 64-bit, lsb,
> >>> compat32
> >>> > > > > > > (XEN) Dom0 kernel:
> 64-bit, PAE,
> >>> lsb,
> >>> > paddr
> >>> > > 0x1000000 ->
> >>> > > > > 0x26bb000
> >>> > > > > > > (XEN) PHYSICAL
> MEMORY ARRANGEMENT:
> >>> > > > > > > (XEN) Dom0 alloc.:
> >>> > > 0000000064000000->0000000068000000
> >>> > > > > (404490 pages
> >>> > > > > > to be allocated)
> >>> > > > > > > (XEN) VIRTUAL
> MEMORY ARRANGEMENT:
> >>> > > > > > > (XEN) Loaded
> kernel:
> >>> > > ffffffff81000000->ffffffff826bb000
> >>> > > > > > > (XEN) Init.
> ramdisk:
> >>> > > ffffffff826bb000->ffffffff82d0d800
> >>> > > > > > > (XEN) Phys-Mach
> map:
> >>> > > ffffffff82d0e000->ffffffff83044050
> >>> > > > > > > (XEN) Start info:
> >>> > > ffffffff83045000->ffffffff830454b4
> >>> > > > > > > (XEN) Page tables:
> >>> > > ffffffff83046000->ffffffff83063000
> >>> > > > > > > (XEN) Boot stack:
> >>> > > ffffffff83063000->ffffffff83064000
> >>> > > > > > > (XEN) TOTAL:
> >>> > > ffffffff80000000->ffffffff83400000
> >>> > > > > > > (XEN) ENTRY
> ADDRESS:
> >>> ffffffff819c1200
> >>> > > > > > > (XEN) Dom0 has
> maximum 12 VCPUs
> >>> > > > > > > (XEN) Scrubbing
> Free RAM: .done.
> >>> > > > > > > (XEN) Xen trace
> buffers: disabled
> >>> > > > > > > (XEN) Std.
> Loglevel: Errors and
> >>> warnings
> >>> > > > > > > (XEN) Guest
> Loglevel: Nothing
> >>> > (Rate-limited:
> >>> > > Errors and
> >>> > > > > warnings)
> >>> > > > > > > (XEN) Xen is
> relinquishing VGA
> >>> console.
> >>> > > > > > > (XEN) *** Serial
> input -> DOM0
> >>> (type
> >>> > 'CTRL-a'
> >>> > > three
> >>> > > > times to
> >>> > > > > switch
> >>> > > > > > input to Xen)
> >>> > > > > > > (XEN) Freed 128kB
> init memory.
> >>> > > > > > > mapping kernel into
> physical memory
> >>> > > > > > > Xen: setup ISA
> identity maps
> >>> > > > > > > about to get
> started...
> >>> > > > > > > Initializing cgroup
> subsys cpuset
> >>> > > > > > > Initializing cgroup
> subsys cpu
> >>> > > > > > > Linux version
> 2.6.32.9
> >>> > > (kishore@xxxxxxxxxxxxxxxxxxxxx)
> >>> > > > (gcc
> >>> > > > > version
> >>> > > > > > 4.1.2 20080704 (Red
> Hat 4.1.2-46)) #1
> >>> SMP
> >>> > Mon Mar
> >>> > > 15
> >>> > > > 15:16:28 PDT
> >>> > > > > 2010
> >>> > > > > > > Command line: ro
> >>> > root=/dev/VolGroup01/LogVol00
> >>> > > > console=hvc0
> >>> > > > > > earlyprintk=xen
> nomodeset
> >>> > > > > > > KERNEL supported
> cpus:
> >>> > > > > > > Intel
> GenuineIntel
> >>> > > > > > > AMD AuthenticAMD
> >>> > > > > > > Centaur
> CentaurHauls
> >>> > > > > > > BIOS-provided
> physical RAM map:
> >>> > > > > > > Xen:
> 0000000000000000 -
> >>> 000000000009d000
> >>> > > (usable)
> >>> > > > > > > Xen:
> 000000000009d000 -
> >>> 0000000000100000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 0000000000100000 -
> >>> 0000000066c0a000
> >>> > > (usable)
> >>> > > > > > > Xen:
> 000000006d597000 -
> >>> 000000006d686000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 000000006f598000 -
> >>> 000000006f59a000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 000000006f59a000 -
> >>> 000000006f5af000
> >>> > (ACPI
> >>> > > NVS)
> >>> > > > > > > Xen:
> 000000006f5af000 -
> >>> 000000006f5d9000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 000000006f5d9000 -
> >>> 000000006f5f9000
> >>> > (ACPI
> >>> > > data)
> >>> > > > > > > Xen:
> 000000006f5f9000 -
> >>> 000000006f6df000
> >>> > (ACPI
> >>> > > NVS)
> >>> > > > > > > Xen:
> 000000006f6df000 -
> >>> 000000006f700000
> >>> > (ACPI
> >>> > > data)
> >>> > > > > > > Xen:
> 000000006f700000 -
> >>> 0000000080000000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 00000000a0000000 -
> >>> 00000000b0000000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 00000000fc000000 -
> >>> 00000000fd000000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 00000000fed1c000 -
> >>> 00000000fed20000
> >>> > > (reserved)
> >>> > > > > > > Xen:
> 00000000ffc00000 -
> >>> 0000000100000000
> >>> > > (reserved)
> >>> > > > > > > bootconsole
> [xenboot0] enabled
> >>> > > > > > > DMI 2.4 present.
> >>> > > > > > > last_pfn = 0x66c0a
> max_arch_pfn =
> >>> > 0x400000000
> >>> > > > > > >
> init_memory_mapping:
> >>> > > 0000000000000000-0000000066c0a000
> >>> > > > > > > RAMDISK: 026bb000 -
> 02d0d800
> >>> > > > > > > ACPI: RSDP
> 00000000000f03f0 00024
> >>> (v02
> >>> > INTEL )
> >>> > > > > > > ACPI: XSDT
> 000000006f6fe120 00064
> >>> (v01
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000000
> >>> > > > > > 01000013)
> >>> > > > > > > ACPI: FACP
> 000000006f6fd000 000F4
> >>> (v04
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000000
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > ACPI: DSDT
> 000000006f6f5000 074F1
> >>> (v02
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000003
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > ACPI: FACS
> 000000006f5f9000 00040
> >>> > > > > > > ACPI: APIC
> 000000006f6f4000 001CC
> >>> (v02
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000000
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > ACPI: MCFG
> 000000006f6f3000 0003C
> >>> (v01
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000001
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > ACPI: HPET
> 000000006f6f2000 00038
> >>> (v01
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000001
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > ACPI: SLIT
> 000000006f6f1000 00030
> >>> (v01
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000001
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > ACPI: WDDT
> 000000006f6f0000 00040
> >>> (v01
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000000
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > ACPI: SSDT
> 000000006f5d9000 1FDDC
> >>> (v01
> >>> > INTEL
> >>> > > SSDT PM
> >>> > > > 00004000
> >>> > > > > INTL
> >>> > > > > > 20061109)
> >>> > > > > > > ACPI:
> 000000006f6ee000 001D0
> >>> (v01
> >>> > INTEL
> >>> > > THRLY
> >>> > > > 00000001
> >>> > > > > MSFT
> >>> > > > > > 0100000D)
> >>> > > > > > > No NUMA
> configuration found
> >>> > > > > > > Faking a node at
> >>> > > 0000000000000000-0000000066c0a000
> >>> > > > > > > Bootmem setup node
> 0
> >>> > > 0000000000000000-0000000066c0a000
> >>> > > > > > > NODE_DATA
> [0000000000008000 -
> >>> > 000000000001ffff]
> >>> > > > > > > bootmap
> [0000000000020000 -
> >>> > 000000000002cd87]
> >>> > > pages d
> >>> > > > > > > (9 early
> reservations) ==> bootmem
> >>> > [0000000000 -
> >>> > > > 0066c0a000]
> >>> > > > > > > #0 [0000000000 -
> 0000001000]
> >>> BIOS data
> >>> > page
> >>> > > ==>
> >>> > > > [0000000000
> >>> > > > > -
> >>> > > > > > 0000001000]
> >>> > > > > > > #1 [0003046000 -
> 0003063000]
> >>> XEN
> >>> > PAGETABLES
> >>> > > ==>
> >>> > > > [0003046000
> >>> > > > > -
> >>> > > > > > 0003063000]
> >>> > > > > > > #2 [0000006000 -
> 0000008000]
> >>> > TRAMPOLINE
> >>> > > ==>
> >>> > > > [0000006000
> >>> > > > > -
> >>> > > > > > 0000008000]
> >>> > > > > > > #3 [0001000000 -
> 000269ae98]
> >>> TEXT
> >>> > DATA BSS
> >>> > > ==>
> >>> > > > [0001000000
> >>> > > > > -
> >>> > > > > > 000269ae98]
> >>> > > > > > > #4 [00026bb000 -
> 0002d0d800]
> >>> > RAMDISK
> >>> > > ==>
> >>> > > > [00026bb000
> >>> > > > > -
> >>> > > > > > 0002d0d800]
> >>> > > > > > > #5 [0002d0e000 -
> 0003046000]
> >>> XEN START
> >>> > INFO
> >>> > > ==>
> >>> > > > [0002d0e000
> >>> > > > > -
> >>> > > > > > 0003046000]
> >>> > > > > > > #6 [000269b000 -
> 000269b011]
> >>> > BRK
> >>> > > ==>
> >>> > > > [000269b000
> >>> > > > > -
> >>> > > > > > 000269b011]
> >>> > > > > > > #7 [0000100000 -
> 000041a000]
> >>> > PGTABLE
> >>> > > ==>
> >>> > > > [0000100000
> >>> > > > > -
> >>> > > > > > 000041a000]
> >>> > > > > > > #8 [0000001000 -
> 0000001030]
> >>> ACPI
> >>> > SLIT
> >>> > > ==>
> >>> > > > [0000001000
> >>> > > > > -
> >>> > > > > > 0000001030]
> >>> > > > > > > found SMP MP-table
> at
> >>> [ffff8800000fd750]
> >>> > fd750
> >>> > > > > > > Zone PFN ranges:
> >>> > > > > > > DMA
> 0x00000000 -> 0x00001000
> >>> > > > > > > DMA32
> 0x00001000 -> 0x00100000
> >>> > > > > > > Normal
> 0x00100000 -> 0x00100000
> >>> > > > > > > Movable zone start
> PFN for each
> >>> node
> >>> > > > > > > early_node_map[2]
> active PFN ranges
> >>> > > > > > > 0: 0x00000000
> -> 0x0000009d
> >>> > > > > > > 0: 0x00000100
> -> 0x00066c0a
> >>> > > > > > > ACPI: PM-Timer IO
> Port: 0x408
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x00]
> >>> lapic_id[0x00]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x01]
> >>> lapic_id[0x02]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x02]
> >>> lapic_id[0x04]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x03]
> >>> lapic_id[0x10]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x04]
> >>> lapic_id[0x12]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x05]
> >>> lapic_id[0x14]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x06]
> >>> lapic_id[0x01]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x07]
> >>> lapic_id[0x03]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x08]
> >>> lapic_id[0x05]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x09]
> >>> lapic_id[0x11]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x0a]
> >>> lapic_id[0x13]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x0b]
> >>> lapic_id[0x15]
> >>> > > enabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x0c]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x0d]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x0e]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x0f]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x10]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x11]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x12]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x13]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x14]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x15]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x16]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC
> (acpi_id[0x17]
> >>> lapic_id[0xff]
> >>> > > disabled)
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x00] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x01] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x02] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x03] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x04] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x05] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x06] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x07] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x08] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x09] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x0a] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x0b] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x0c] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x0d] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x0e] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x0f] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x10] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x11] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x12] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x13] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x14] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x15] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x16] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: LAPIC_NMI
> (acpi_id[0x17] high
> >>> level
> >>> > > lint[0x1])
> >>> > > > > > > ACPI: IOAPIC
> (id[0x08]
> >>> address[0xfec00000]
> >>> > > gsi_base[0])
> >>> > > > > > > IOAPIC[0]: apic_id
> 8, version 0,
> >>> address
> >>> > > 0xfec00000, GSI
> >>> > > > 0-0
> >>> > > > > > > ACPI: IOAPIC
> (id[0x09]
> >>> address[0xfec90000]
> >>> > > gsi_base[24])
> >>> > > > > > > IOAPIC[1]: apic_id
> 9, version 0,
> >>> address
> >>> > > 0xfec90000, GSI
> >>> > > > 24-24
> >>> > > > > > > ACPI: INT_SRC_OVR
> (bus 0 bus_irq 0
> >>> > global_irq 2
> >>> > > dfl dfl)
> >>> > > > > > > ERROR: Unable to
> locate IOAPIC for
> >>> GSI 2
> >>> > > > > > > ACPI: INT_SRC_OVR
> (bus 0 bus_irq 9
> >>> > global_irq 9
> >>> > > high
> >>> > > > level)
> >>> > > > > > > ERROR: Unable to
> locate IOAPIC for
> >>> GSI 9
> >>> > > > > > > Using ACPI (MADT)
> for SMP
> >>> configuration
> >>> > > information
> >>> > > > > > > ACPI: HPET id:
> 0x8086a401 base:
> >>> 0xfed00000
> >>> > > > > > > SMP: Allowing 12
> CPUs, 0 hotplug
> >>> CPUs
> >>> > > > > > > PM: Registered
> nosave memory:
> >>> > 000000000009d000 -
> >>> > > > > 0000000000100000
> >>> > > > > > > Allocating PCI
> resources starting
> >>> at
> >>> > b0000000
> >>> > > (gap:
> >>> > > > > b0000000:4c000000)
> >>> > > > > > > Booting
> paravirtualized kernel on
> >>> Xen
> >>> > > > > > > Xen version:
> 3.4.3-rc4-pre
> >>> (preserve-AD)
> >>> > (dom0)
> >>> > > > > > > NR_CPUS:512
> nr_cpumask_bits:512
> >>> > nr_cpu_ids:12
> >>> > > > nr_node_ids:1
> >>> > > > > > > PERCPU: Embedded
> 478 pages/cpu
> >>> > @ffff880005ebc000
> >>> > > > s1928024 r8192
> >>> > > > > d21672
> >>> > > > > > u1957888
> >>> > > > > > > pcpu-alloc:
> s1928024 r8192 d21672
> >>> u1957888
> >>> > > > alloc=478*4096
> >>> > > > > > > pcpu-alloc: [0] 00
> [0] 01 [0] 02
> >>> [0] 03
> >>> > [0] 04
> >>> > > [0] 05
> >>> > > > [0] 06
> >>> > > > > [0] 07
> >>> > > > > > > pcpu-alloc: [0] 08
> [0] 09 [0] 10
> >>> [0] 11
> >>> > > > > > > Xen: using
> vcpu_info placement
> >>> > > > > > > Built 1 zonelists
> in Node order,
> >>> mobility
> >>> > > grouping on.
> >>> > > > Total
> >>> > > > > pages:
> >>> > > > > > 409291
> >>> > > > > > > Policy zone: DMA32
> >>> > > > > > > Kernel command
> line: ro
> >>> > > root=/dev/VolGroup01/LogVol00
> >>> > > > > console=hvc0
> >>> > > > > > earlyprintk=xen
> nomodeset
> >>> > > > > > > PID hash table
> entries: 4096
> >>> (order: 3,
> >>> > 32768
> >>> > > bytes)
> >>> > > > > > > Initializing CPU#0
> >>> > > > > > > DMA: Placing 64MB
> software IO TLB
> >>> between
> >>> > > > ffff880007525000 -
> >>> > > > > > ffff88000b525000
> >>> > > > > > > DMA: software IO
> TLB at phys
> >>> 0x7525000 -
> >>> > > 0xb525000
> >>> > > > > > > xen_swiotlb_fixup:
> >>> buf=ffff880007525000
> >>> > > size=67108864
> >>> > > > > > > xen_swiotlb_fixup:
> >>> buf=ffff88000b585000
> >>> > > size=32768
> >>> > > > > > > Memory:
> 1514268k/1683496k available
> >>> (4654k
> >>> > kernel
> >>> > > code,
> >>> > > > 396k
> >>> > > > > absent,
> >>> > > > > > 168832k reserved,
> 3443k data, 3396k
> >>> init)
> >>> > > > > > > SLUB: Genslabs=14,
> HWalign=64,
> >>> Order=0-3,
> >>> > > MinObjects=0,
> >>> > > > > CPUs=12,
> >>> > > > > > Nodes=1
> >>> > > > > > > Hierarchical RCU
> implementation.
> >>> > > > > > > NR_IRQS:4352
> nr_irqs:3072
> >>> > > > > > > Already setup the
> GSI :0
> >>> > > > > > > Already setup the
> GSI :1
> >>> > > > > > > Already setup the
> GSI :2
> >>> > > > > > > Already setup the
> GSI :3
> >>> > > > > > > Already setup the
> GSI :4
> >>> > > > > > > Already setup the
> GSI :5
> >>> > > > > > > Already setup the
> GSI :6
> >>> > > > > > > Already setup the
> GSI :7
> >>> > > > > > > Already setup the
> GSI :8
> >>> > > > > > > Already setup the
> GSI :9
> >>> > > > > > > Already setup the
> GSI :10
> >>> > > > > > > Already setup the
> GSI :11
> >>> > > > > > > Already setup the
> GSI :12
> >>> > > > > > > Already setup the
> GSI :13
> >>> > > > > > > Already setup the
> GSI :14
> >>> > > > > > > Already setup the
> GSI :15
> >>> > > > > > > ACPI: INT_SRC_OVR
> (bus 0 bus_irq 0
> >>> > global_irq 2
> >>> > > dfl dfl)
> >>> > > > > > > ACPI: INT_SRC_OVR
> (bus 0 bus_irq 9
> >>> > global_irq 9
> >>> > > high
> >>> > > > level)
> >>> > > > > > > xen: sci override:
> source_irq=9
> >>> > global_irq=9
> >>> > > trigger=c
> >>> > > > > polarity=1
> >>> > > > > > > xen_allocate_pirq:
> returning irq 9
> >>> for gsi
> >>> > 9
> >>> > > > > > > Already setup the
> GSI :9
> >>> > > > > > > xen: acpi sci 9
> >>> > > > > > > Console: colour
> VGA+ 80x25
> >>> > > > > > > console [hvc0]
> enabled, bootconsole
> >>> > disabled
> >>> > > console
> >>> > > > [hvc0]
> >>> > > > > enabled,
> >>> > > > > > bootconsole disabled
> >>> > > > > > > Lock dependency
> validator:
> >>> Copyright (c)
> >>> > 2006 Red
> >>> > > Hat,
> >>> > > > Inc.,
> >>> > > > > Ingo
> >>> > > > > > Molnar ...
> MAX_LOCKDEP_SUBCLASSES: 8
> >>> ...
> >>> > > MAX_LOCK_DEPTH:
> >>> > > > > 48
> >>> > > > > > ... MAX_LOCKDEP_KEYS:
> 8191 ...
> >>> > > CLASSHASH_SIZE:
> >>> > > > > 4096 ...
> >>> > > > > > MAX_LOCKDEP_ENTRIES:
> 16384 ...
> >>> > > MAX_LOCKDEP_CHAINS:
> >>> > > > 32768
> >>> > > > > ...
> >>> > > > > > CHAINHASH_SIZE:
> 16384
> >>> memory used
> >>> > by lock
> >>> > > > dependency
> >>> > > > > info:
> >>> > > > > > 6367 kB per
> task-struct memory
> >>> footprint:
> >>> > 2688
> >>> > > bytes
> >>> > > > allocated
> >>> > > > > 17039360
> >>> > > > > > bytes of page_cgroup
> please try
> >>> > > 'cgroup_disable=memory'
> >>> > > > option if
> >>> > > > > you
> >>> > > > > > don't want memory
> cgroups installing
> >>> Xen
> >>> > timer for
> >>> > > CPU 0
> >>> > > > Detected
> >>> > > > > > 3200.206 MHz
> processor. Calibrating
> >>> delay
> >>> > loop
> >>> > > (skipped),
> >>> > > > value
> >>> > > > > > calculated using timer
> frequency..
> >>> 6400.41
> >>> > BogoMIPS
> >>> > > > (lpj=3200206)
> >>> > > > > > Security Framework
> initialized
> >>> SELinux:
> >>> > > Initializing.
> >>> > > > Dentry
> >>> > > > > cache hash
> >>> > > > > > table entries: 262144
> (order: 9,
> >>> 2097152
> >>> > bytes)
> >>> > > > Inode-cache hash
> >>> > > > > table
> >>> > > > > > entries: 131072
> (order: 8, 1048576
> >>> bytes)
> >>> > > Mount-cache hash
> >>> > > > table
> >>> > > > > > entries: 256
> Initializing cgroup
> >>> subsys ns
> >>> > > Initializing
> >>> > > > cgroup
> >>> > > > > subsys
> >>> > > > > > cpuacct Initializing
> cgroup subsys
> >>> memory
> >>> > > Initializing
> >>> > > > cgroup
> >>> > > > > subsys
> >>> > > > > > devices Initializing
> cgroup subsys
> >>> freezer
> >>> > > Initializing
> >>> > > > cgroup
> >>> > > > > subsys
> >>> > > > > > net_cls CPU: L1 I
> cache: 32K, L1 D
> >>> cache:
> >>> > 32K CPU:
> >>> > > L2
> >>> > > > cache: 256K
> >>> > > > > CPU:
> >>> > > > > > L3 cache: 12288K CPU
> 0/0x0 -> Node 0
> >>> CPU:
> >>> > > Unsupported
> >>> > > > number of
> >>> > > > > siblings
> >>> > > > > > 32 Performance Events:
> unsupported p6
> >>> CPU
> >>> > model 44
> >>> > > no PMU
> >>> > > > driver,
> >>> > > > > > software events only.
> lockdep: fixing
> >>> up
> >>> > > alternatives. SMP
> >>> > > > > alternatives:
> >>> > > > > > switching to UP code
> ACPI: Core
> >>> revision
> >>> > 20090903
> >>> > > ftrace:
> >>> > > > > converting
> >>> > > > > > mcount calls to 0f 1f
> 44 00 00
> >>> ftrace:
> >>> > allocating
> >>> > > 27971
> >>> > > > entries
> >>> > > > > in 110
> >>> > > > > > pages installing Xen
> timer for CPU 1
> >>> > lockdep:
> >>> > > fixing up
> >>> > > > > alternatives.
> >>> > > > > > SMP alternatives:
> switching to SMP
> >>> code
> >>> > > Initializing CPU#1
> >>> > > > CPU:
> >>> > > > > L1 I
> >>> > > > > > cache: 32K, L1 D
> cache: 32K CPU: L2
> >>> cache:
> >>> > 256K
> >>> > > CPU: L3
> >>> > > > cache:
> >>> > > > > 12288K
> >>> > > > > > CPU 1/0x0 -> Node 0
> CPU: Unsupported
> >>> number
> >>> > of
> >>> > > siblings 32
> >>> > > > > installing
> >>> > > > > > Xen timer for CPU 2
> Initializing
> >>> CPU#2 CPU:
> >>> > L1 I
> >>> > > cache:
> >>> > > > 32K, L1 D
> >>> > > > > cache:
> >>> > > > > > 32K CPU: L2 cache:
> 256K CPU: L3
> >>> cache:
> >>> > 12288K CPU
> >>> > > 2/0x0 ->
> >>> > > > Node 0
> >>> > > > > CPU:
> >>> > > > > > Unsupported number of
> siblings 32
> >>> installing
> >>> > Xen
> >>> > > timer for
> >>> > > > CPU 3
> >>> > > > > > Initializing CPU#3
> CPU: L1 I cache:
> >>> 32K, L1
> >>> > D
> >>> > > cache: 32K
> >>> > > > CPU: L2
> >>> > > > > cache:
> >>> > > > > > 256K CPU: L3 cache:
> 12288K CPU 3/0x0
> >>> -> Node
> >>> > 0 CPU:
> >>> > > > Unsupported
> >>> > > > > number
> >>> > > > > > of siblings 32
> installing Xen timer
> >>> for CPU
> >>> > 4
> >>> > > Initializing
> >>> > > > CPU#4
> >>> > > > > CPU: L1
> >>> > > > > > I cache: 32K, L1 D
> cache: 32K CPU: L2
> >>> cache:
> >>> > 256K
> >>> > > CPU: L3
> >>> > > > cache:
> >>> > > > > 12288K
> >>> > > > > > CPU 4/0x0 -> Node 0
> CPU: Unsupported
> >>> number
> >>> > of
> >>> > > siblings 32
> >>> > > > > installing
> >>> > > > > > Xen timer for CPU 5
> Initializing
> >>> CPU#5 CPU:
> >>> > L1 I
> >>> > > cache:
> >>> > > > 32K, L1 D
> >>> > > > > cache:
> >>> > > > > > 32K CPU: L2 cache:
> 256K CPU: L3
> >>> cache:
> >>> > 12288K CPU
> >>> > > 5/0x0 ->
> >>> > > > Node 0
> >>> > > > > CPU:
> >>> > > > > > Unsupported number of
> siblings 32
> >>> installing
> >>> > Xen
> >>> > > timer for
> >>> > > > CPU 6
> >>> > > > > > Initializing CPU#6
> CPU: L1 I cache:
> >>> 32K, L1
> >>> > D
> >>> > > cache: 32K
> >>> > > > CPU: L2
> >>> > > > > cache:
> >>> > > > > > 256K CPU: L3 cache:
> 12288K CPU 6/0x0
> >>> -> Node
> >>> > 0 CPU:
> >>> > > > Unsupported
> >>> > > > > number
> >>> > > > > > of siblings 32
> installing Xen timer
> >>> for CPU
> >>> > 7
> >>> > > Initializing
> >>> > > > CPU#7
> >>> > > > > CPU: L1
> >>> > > > > > I cache: 32K, L1 D
> cache: 32K CPU: L2
> >>> cache:
> >>> > 256K
> >>> > > CPU: L3
> >>> > > > cache:
> >>> > > > > 12288K
> >>> > > > > > CPU 7/0x0 -> Node 0
> CPU: Unsupported
> >>> number
> >>> > of
> >>> > > siblings 32
> >>> > > > > installing
> >>> > > > > > Xen timer for CPU 8
> Initializing
> >>> CPU#8 CPU:
> >>> > L1 I
> >>> > > cache:
> >>> > > > 32K, L1 D
> >>> > > > > cache:
> >>> > > > > > 32K CPU: L2 cache:
> 256K CPU: L3
> >>> cache:
> >>> > 12288K CPU
> >>> > > 8/0x0 ->
> >>> > > > Node 0
> >>> > > > > CPU:
> >>> > > > > > Unsupported number of
> siblings 32
> >>> installing
> >>> > Xen
> >>> > > timer for
> >>> > > > CPU 9
> >>> > > > > > Initializing CPU#9
> CPU: L1 I cache:
> >>> 32K, L1
> >>> > D
> >>> > > cache: 32K
> >>> > > > CPU: L2
> >>> > > > > cache:
> >>> > > > > > 256K CPU: L3 cache:
> 12288K CPU 9/0x0
> >>> -> Node
> >>> > 0 CPU:
> >>> > > > Unsupported
> >>> > > > > number
> >>> > > > > > of siblings 32
> installing Xen timer
> >>> for CPU
> >>> > 10
> >>> > > > Initializing
> >>> > > > > CPU#10 CPU:
> >>> > > > > > L1 I cache: 32K, L1 D
> cache: 32K CPU:
> >>> L2
> >>> > cache:
> >>> > > 256K CPU:
> >>> > > > L3
> >>> > > > > cache:
> >>> > > > > > 12288K CPU 10/0x0 ->
> Node 0 CPU:
> >>> Unsupported
> >>> > number
> >>> > > of
> >>> > > > siblings
> >>> > > > > 32
> >>> > > > > > installing Xen timer
> for CPU 11
> >>> Initializing
> >>> > CPU#11
> >>> > > CPU:
> >>> > > > L1 I
> >>> > > > > cache:
> >>> > > > > > 32K, L1 D cache: 32K
> CPU: L2 cache:
> >>> 256K
> >>> > CPU: L3
> >>> > > cache:
> >>> > > > 12288K
> >>> > > > > CPU
> >>> > > > > > 11/0x0 -> Node 0 CPU:
> Unsupported
> >>> number of
> >>> > > siblings 32
> >>> > > > Brought
> >>> > > > > up 12
> >>> > > > > > CPUs Grant table
> initialized
> >>> regulator: core
> >>> > > version 0.5
> >>> > > > Time:
> >>> > > > > 14:45:00
> >>> > > > > > Date: 03/16/10 NET:
> Registered
> >>> protocol
> >>> > family 16
> >>> > > > > xenbus_probe_init ok
> >>> > > > > > ACPI FADT declares the
> system doesn't
> >>> > support PCIe
> >>> > > ASPM,
> >>> > > > so
> >>> > > > > disable it
> >>> > > > > > ACPI: bus type pci
> registered PCI:
> >>> MCFG
> >>> > > configuration 0:
> >>> > > > base
> >>> > > > > a0000000
> >>> > > > > > segment 0 buses 0 -
> 255 PCI: MCFG
> >>> area at
> >>> > a0000000
> >>> > > > reserved in
> >>> > > > > E820 PCI:
> >>> > > > > > Using MMCONFIG at
> a0000000 - afffffff
> >>> PCI:
> >>> > Using
> >>> > > > configuration
> >>> > > > > type 1
> >>> > > > > > for base access bio:
> create slab
> >>> <bio-0> at
> >>> > 0 ACPI
> >>> > > Error:
> >>> > > > Field
> >>> > > > > [CPB3]
> >>> > > > > > at 96 exceeds Buffer
> [NULL] size 64
> >>> (bits)
> >>> > > > > (20090903/dsopcode-596) ACPI
> >>> > > > > > Error (psparse-0537):
> Method
> >>> parse/execution
> >>> > failed
> >>> > > > [\_SB_._OSC]
> >>> > > > > (Node
> >>> > > > > > ffff880064e00c98),
> >>> AE_AML_BUFFER_LIMIT ACPI:
> >>> > > Interpreter
> >>> > > > enabled
> >>> > > > > ACPI:
> >>> > > > > > (supports S0 S1 S3 S4
> S5) ACPI: Using
> >>> IOAPIC
> >>> > for
> >>> > > interrupt
> >>> > > > > routing ACPI
> >>> > > > > > Warning: Incorrect
> checksum in table
> >>> [ ]
> >>> > - 97,
> >>> > > should
> >>> > > > be DB
> >>> > > > > > (20090903/tbutils-314)
> ACPI: No dock
> >>> devices
> >>> > found.
> >>> > > ACPI:
> >>> > > > PCI
> >>> > > > > Root
> >>> > > > > > Bridge [PCI0]
> (0000:00) pci
> >>> 0000:00:01.0:
> >>> > PME#
> >>> > > supported
> >>> > > > from D0
> >>> > > > > D3hot
> >>> > > > > > D3cold pci
> 0000:00:01.0: PME#
> >>> disabled pci
> >>> > > 0000:00:02.0:
> >>> > > > PME#
> >>> > > > > supported
> >>> > > > > > from D0 D3hot D3cold
> pci
> >>> 0000:00:02.0: PME#
> >>> > > disabled pci
> >>> > > > > 0000:00:03.0:
> >>> > > > > > PME# supported from D0
> D3hot D3cold
> >>> pci
> >>> > > 0000:00:03.0: PME#
> >>> > > > > disabled pci
> >>> > > > > > 0000:00:04.0: PME#
> supported from D0
> >>> D3hot
> >>> > D3cold
> >>> > > pci
> >>> > > > > 0000:00:04.0: PME#
> >>> > > > > > disabled pci
> 0000:00:05.0: PME#
> >>> supported
> >>> > from D0
> >>> > > D3hot
> >>> > > > D3cold
> >>> > > > > pci
> >>> > > > > > 0000:00:05.0: PME#
> disabled pci
> >>> > 0000:00:06.0: PME#
> >>> > > > supported from
> >>> > > > > D0
> >>> > > > > > D3hot D3cold pci
> 0000:00:06.0: PME#
> >>> disabled
> >>> > pci
> >>> > > > 0000:00:07.0:
> >>> > > > > PME#
> >>> > > > > > supported from D0
> D3hot D3cold pci
> >>> > 0000:00:07.0:
> >>> > > PME#
> >>> > > > disabled
> >>> > > > > pci
> >>> > > > > > 0000:00:08.0: PME#
> supported from D0
> >>> D3hot
> >>> > D3cold
> >>> > > pci
> >>> > > > > 0000:00:08.0: PME#
> >>> > > > > > disabled pci
> 0000:00:09.0: PME#
> >>> supported
> >>> > from D0
> >>> > > D3hot
> >>> > > > D3cold
> >>> > > > > pci
> >>> > > > > > 0000:00:09.0: PME#
> disabled pci
> >>> > 0000:00:0a.0: PME#
> >>> > > > supported from
> >>> > > > > D0
> >>> > > > > > D3hot D3cold pci
> 0000:00:0a.0: PME#
> >>> disabled
> >>> > pci
> >>> > > > 0000:00:13.0:
> >>> > > > > PME#
> >>> > > > > > supported from D0
> D3hot D3cold pci
> >>> > 0000:00:13.0:
> >>> > > PME#
> >>> > > > disabled
> >>> > > > > pci
> >>> > > > > > 0000:00:1a.7: PME#
> supported from D0
> >>> D3hot
> >>> > D3cold
> >>> > > pci
> >>> > > > > 0000:00:1a.7: PME#
> >>> > > > > > disabled pci
> 0000:00:1c.0: PME#
> >>> supported
> >>> > from D0
> >>> > > D3hot
> >>> > > > D3cold
> >>> > > > > pci
> >>> > > > > > 0000:00:1c.0: PME#
> disabled pci
> >>> > 0000:00:1c.4: PME#
> >>> > > > supported from
> >>> > > > > D0
> >>> > > > > > D3hot D3cold pci
> 0000:00:1c.4: PME#
> >>> disabled
> >>> > pci
> >>> > > > 0000:00:1c.5:
> >>> > > > > PME#
> >>> > > > > > supported from D0
> D3hot D3cold pci
> >>> > 0000:00:1c.5:
> >>> > > PME#
> >>> > > > disabled
> >>> > > > > pci
> >>> > > > > > 0000:00:1d.7: PME#
> supported from D0
> >>> D3hot
> >>> > D3cold
> >>> > > pci
> >>> > > > > 0000:00:1d.7: PME#
> >>> > > > > > disabled pci
> 0000:00:1f.0: quirk:
> >>> region
> >>> > 0400-047f
> >>> > > claimed
> >>> > > > by
> >>> > > > > ICH6
> >>> > > > > > ACPI/GPIO/TCO pci
> 0000:00:1f.0:
> >>> quirk:
> >>> > region
> >>> > > 0500-053f
> >>> > > > claimed
> >>> > > > > by ICH6
> >>> > > > > > GPIO pci 0000:00:1f.0:
> ICH7 LPC
> >>> Generic IO
> >>> > decode 1
> >>> > > PIO at
> >>> > > > 0680
> >>> > > > > (mask
> >>> > > > > > 000f) pci
> 0000:00:1f.0: ICH7 LPC
> >>> Generic IO
> >>> > decode
> >>> > > 2 PIO
> >>> > > > at 0ca0
> >>> > > > > (mask
> >>> > > > > > 000f) pci
> 0000:00:1f.0: ICH7 LPC
> >>> Generic IO
> >>> > decode
> >>> > > 3 PIO
> >>> > > > at 0600
> >>> > > > > (mask
> >>> > > > > > 001f) pci
> 0000:00:1f.2: PME#
> >>> supported from
> >>> > D3hot
> >>> > > pci
> >>> > > > > 0000:00:1f.2: PME#
> >>> > > > > > disabled pci
> 0000:01:00.0: PME#
> >>> supported
> >>> > from D0
> >>> > > D3hot
> >>> > > > D3cold
> >>> > > > > pci
> >>> > > > > > 0000:01:00.0: PME#
> disabled pci
> >>> > 0000:01:00.1: PME#
> >>> > > > supported from
> >>> > > > > D0
> >>> > > > > > D3hot D3cold pci
> 0000:01:00.1: PME#
> >>> disabled
> >>> > pci
> >>> > > > 0000:0c:00.0:
> >>> > > > > disabling
> >>> > > > > > ASPM on pre-1.1 PCIe
> device. You can
> >>> enable
> >>> > it
> >>> > > with
> >>> > > > > 'pcie_aspm=force'
> >>> > > > > > pci 0000:00:1e.0:
> transparent bridge
> >>> ACPI:
> >>> > PCI Root
> >>> > > Bridge
> >>> > > > [PCI1]
> >>> > > > > > (0000:fe) ACPI: PCI
> Root Bridge
> >>> [PCI2]
> >>> > (0000:ff)
> >>> > > ACPI: PCI
> >>> > > > > Interrupt
> >>> > > > > > Link [LNKA] (IRQs 3 4
> 5 6 7 9 10 *11
> >>> 12 14
> >>> > 15)
> >>> > > ACPI: PCI
> >>> > > > > Interrupt Link
> >>> > > > > > [LNKB] (IRQs 3 4 5 6 7
> 9 *10 11 12 14
> >>> 15)
> >>> > ACPI: PCI
> >>> > > > Interrupt
> >>> > > > > Link
> >>> > > > > > [LNKC] (IRQs 3 4 5 6 7
> *9 10 11 12 14
> >>> 15)
> >>> > ACPI: PCI
> >>> > > > Interrupt
> >>> > > > > Link
> >>> > > > > > [LNKD] (IRQs 3 4 *5 6
> 7 9 10 11 12 14
> >>> 15)
> >>> > ACPI: PCI
> >>> > > > Interrupt
> >>> > > > > Link
> >>> > > > > > [LNKE] (IRQs 3 4 5 6 7
> 9 10 11 12 14
> >>> 15) *0,
> >>> > > disabled.
> >>> > > > ACPI: PCI
> >>> > > > > > Interrupt Link [LNKF]
> (IRQs 3 4 5 6 7
> >>> 9 10
> >>> > *11 12
> >>> > > 14 15)
> >>> > > > ACPI:
> >>> > > > > PCI
> >>> > > > > > Interrupt Link [LNKG]
> (IRQs 3 4 5 6 7
> >>> 9 10
> >>> > 11 12 14
> >>> > > 15)
> >>> > > > *0,
> >>> > > > > disabled.
> >>> > > > > > ACPI: PCI Interrupt
> Link [LNKH] (IRQs
> >>> 3 4 5
> >>> > 6 7 9
> >>> > > *10 11
> >>> > > > 12 14
> >>> > > > > 15)
> >>> > > > > >
> xenbus_probe_backend_init bus
> >>> registered ok
> >>> > > > > xenbus_probe_frontend_init
> >>> > > > > > bus registered ok
> xen_balloon:
> >>> Initialising
> >>> > balloon
> >>> > > driver
> >>> > > > with
> >>> > > > > page
> >>> > > > > > order 0. vgaarb:
> device added:
> >>> > > > > >
> >>> > >
> PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
> >>> > > > vgaarb:
> >>> > > > > loaded
> >>> > > > > > SCSI subsystem
> initialized usbcore:
> >>> > registered new
> >>> > > > interface
> >>> > > > > driver
> >>> > > > > > usbfs usbcore:
> registered new
> >>> interface
> >>> > driver hub
> >>> > > > usbcore:
> >>> > > > > registered
> >>> > > > > > new device driver usb
> PCI: Using ACPI
> >>> for
> >>> > IRQ
> >>> > > routing
> >>> > > > NetLabel:
> >>> > > > > > Initializing NetLabel:
> domain hash
> >>> size =
> >>> > 128
> >>> > > NetLabel:
> >>> > > > > protocols =
> >>> > > > > > UNLABELED CIPSOv4
> NetLabel:
> >>> unlabeled
> >>> > traffic
> >>> > > allowed by
> >>> > > > default
> >>> > > > > > Switching to
> clocksource xen kstop/0
> >>> used
> >>> > greatest
> >>> > > stack
> >>> > > > depth:
> >>> > > > > 6568
> >>> > > > > > bytes left kstop/1
> used greatest
> >>> stack
> >>> > depth: 6536
> >>> > > bytes
> >>> > > > left
> >>> > > > > pnp: PnP
> >>> > > > > > ACPI init ACPI: bus
> type pnp
> >>> registered
> >>> > > xen_allocate_pirq:
> >>> > > > > returning irq
> >>> > > > > > 8 for gsi 8 Already
> setup the GSI :8
> >>> > > xen_allocate_pirq:
> >>> > > > returning
> >>> > > > > irq 13
> >>> > > > > > for gsi 13 Already
> setup the GSI :13
> >>> pnp:
> >>> > PnP ACPI:
> >>> > > found
> >>> > > > 13
> >>> > > > > devices
> >>> > > > > > ACPI: ACPI bus type
> pnp unregistered
> >>> system
> >>> > 00:07:
> >>> > > ioport
> >>> > > > range
> >>> > > > > > 0x500-0x53f has been
> reserved system
> >>> 00:07:
> >>> > ioport
> >>> > > range
> >>> > > > > 0x400-0x47f has
> >>> > > > > > been reserved system
> 00:07: ioport
> >>> range
> >>> > > 0x800-0x81f has
> >>> > > > been
> >>> > > > > reserved
> >>> > > > > > system 00:07: ioport
> range
> >>> 0x2f8-0x2ff has
> >>> > been
> >>> > > reserved
> >>> > > > system
> >>> > > > > 00:07:
> >>> > > > > > iomem range
> 0xfed1c000-0xfed8bffe
> >>> could not
> >>> > be
> >>> > > reserved
> >>> > > > system
> >>> > > > > 00:07:
> >>> > > > > > iomem range
> 0xff000000-0xffffffff
> >>> could not
> >>> > be
> >>> > > reserved
> >>> > > > system
> >>> > > > > 00:07:
> >>> > > > > > iomem range
> 0xfee00000-0xfeefffff has
> >>> been
> >>> > reserved
> >>> > > system
> >>> > > > 00:07:
> >>> > > > > iomem
> >>> > > > > > range
> 0xfe900000-0xfe90001f has been
> >>> > reserved
> >>> > > system
> >>> > > > 00:07: iomem
> >>> > > > > range
> >>> > > > > > 0xfea00000-0xfea0001f
> has been
> >>> reserved
> >>> > system
> >>> > > 00:07:
> >>> > > > iomem range
> >>> > > > > > 0xfed1b000-0xfed1bfff
> has been
> >>> reserved pci
> >>> > > 0000:0c:00.0:
> >>> > > > BAR 6:
> >>> > > > > no
> >>> > > > > > parent found for of
> device
> >>> > [0xffff0000-0xffffffff]
> >>> > > pci
> >>> > > > > 0000:00:01.0: PCI
> >>> > > > > > bridge, secondary bus
> 0000:01 pci
> >>> > 0000:00:01.0:
> >>> > > IO
> >>> > > > window:
> >>> > > > > > 0x1000-0x1fff pci
> 0000:00:01.0: MEM
> >>> > window:
> >>> > > > > 0xb1900000-0xb19fffff pci
> >>> > > > > > 0000:00:01.0:
> PREFETCH window:
> >>> disabled
> >>> > pci
> >>> > > > 0000:00:02.0: PCI
> >>> > > > > bridge,
> >>> > > > > > secondary bus 0000:02
> pci
> >>> 0000:00:02.0: IO
> >>> > > window:
> >>> > > > disabled pci
> >>> > > > > > 0000:00:02.0: MEM
> window: disabled
> >>> pci
> >>> > > 0000:00:02.0:
> >>> > > > PREFETCH
> >>> > > > > > window: disabled pci
> 0000:00:03.0:
> >>> PCI
> >>> > bridge,
> >>> > > secondary
> >>> > > > bus
> >>> > > > > 0000:03 pci
> >>> > > > > > 0000:00:03.0: IO
> window: disabled
> >>> pci
> >>> > > 0000:00:03.0:
> >>> > > > MEM
> >>> > > > > window:
> >>> > > > > > disabled pci
> 0000:00:03.0: PREFETCH
> >>> > window:
> >>> > > disabled pci
> >>> > > > > 0000:00:04.0:
> >>> > > > > > PCI bridge, secondary
> bus 0000:04 pci
> >>> > 0000:00:04.0:
> >>> > > IO
> >>> > > > window:
> >>> > > > > > disabled pci
> 0000:00:04.0: MEM
> >>> window:
> >>> > disabled
> >>> > > pci
> >>> > > > > 0000:00:04.0:
> >>> > > > > > PREFETCH window:
> disabled pci
> >>> 0000:00:05.0:
> >>> > PCI
> >>> > > bridge,
> >>> > > > secondary
> >>> > > > > bus
> >>> > > > > > 0000:05 pci
> 0000:00:05.0: IO
> >>> window:
> >>> > disabled pci
> >>> > > > 0000:00:05.0:
> >>> > > > > MEM
> >>> > > > > > window: disabled pci
> 0000:00:05.0:
> >>> > PREFETCH
> >>> > > window:
> >>> > > > disabled
> >>> > > > > pci
> >>> > > > > > 0000:00:06.0: PCI
> bridge, secondary
> >>> bus
> >>> > 0000:06 pci
> >>> > > > 0000:00:06.0:
> >>> > > > > IO
> >>> > > > > > window: disabled pci
> 0000:00:06.0:
> >>> MEM
> >>> > window:
> >>> > > disabled
> >>> > > > pci
> >>> > > > > > 0000:00:06.0:
> PREFETCH window:
> >>> disabled
> >>> > pci
> >>> > > > 0000:00:07.0: PCI
> >>> > > > > bridge,
> >>> > > > > > secondary bus 0000:07
> pci
> >>> 0000:00:07.0: IO
> >>> > > window:
> >>> > > > disabled pci
> >>> > > > > > 0000:00:07.0: MEM
> window: disabled
> >>> pci
> >>> > > 0000:00:07.0:
> >>> > > > PREFETCH
> >>> > > > > > window: disabled pci
> 0000:00:08.0:
> >>> PCI
> >>> > bridge,
> >>> > > secondary
> >>> > > > bus
> >>> > > > > 0000:08 pci
> >>> > > > > > 0000:00:08.0: IO
> window: disabled
> >>> pci
> >>> > > 0000:00:08.0:
> >>> > > > MEM
> >>> > > > > window:
> >>> > > > > > disabled pci
> 0000:00:08.0: PREFETCH
> >>> > window:
> >>> > > disabled pci
> >>> > > > > 0000:00:09.0:
> >>> > > > > > PCI bridge, secondary
> bus 0000:09 pci
> >>> > 0000:00:09.0:
> >>> > > IO
> >>> > > > window:
> >>> > > > > > 0x3000-0x3fff pci
> 0000:00:09.0: MEM
> >>> > window:
> >>> > > > > 0xb1b00000-0xb1cfffff pci
> >>> > > > > > 0000:00:09.0:
> PREFETCH window:
> >>> > > > >
> 0x000000b1d00000-0x000000b1efffff pci
> >>> > > > > > 0000:00:0a.0: PCI
> bridge, secondary
> >>> bus
> >>> > 0000:0a pci
> >>> > > > 0000:00:0a.0:
> >>> > > > > IO
> >>> > > > > > window: disabled pci
> 0000:00:0a.0:
> >>> MEM
> >>> > window:
> >>> > > disabled
> >>> > > > pci
> >>> > > > > > 0000:00:0a.0:
> PREFETCH window:
> >>> disabled
> >>> > pci
> >>> > > > 0000:00:1c.0: PCI
> >>> > > > > bridge,
> >>> > > > > > secondary bus 0000:0b
> pci
> >>> 0000:00:1c.0: IO
> >>> > > window:
> >>> > > > disabled pci
> >>> > > > > > 0000:00:1c.0: MEM
> window: disabled
> >>> pci
> >>> > > 0000:00:1c.0:
> >>> > > > PREFETCH
> >>> > > > > > window: disabled pci
> 0000:00:1c.4:
> >>> PCI
> >>> > bridge,
> >>> > > secondary
> >>> > > > bus
> >>> > > > > 0000:0c pci
> >>> > > > > > 0000:00:1c.4: IO
> window: disabled
> >>> pci
> >>> > > 0000:00:1c.4:
> >>> > > > MEM
> >>> > > > > window:
> >>> > > > > > 0xb1000000-0xb18fffff
> pci
> >>> 0000:00:1c.4:
> >>> > PREFETCH
> >>> > > window:
> >>> > > > > >
> 0x000000b0000000-0x000000b0ffffff pci
> >>> > 0000:00:1c.5:
> >>> > > PCI
> >>> > > > bridge,
> >>> > > > > > secondary bus 0000:0d
> pci
> >>> 0000:00:1c.5: IO
> >>> > > window:
> >>> > > > disabled pci
> >>> > > > > > 0000:00:1c.5: MEM
> window: disabled
> >>> pci
> >>> > > 0000:00:1c.5:
> >>> > > > PREFETCH
> >>> > > > > > window: disabled pci
> 0000:00:1e.0:
> >>> PCI
> >>> > bridge,
> >>> > > secondary
> >>> > > > bus
> >>> > > > > 0000:0e pci
> >>> > > > > > 0000:00:1e.0: IO
> window: disabled
> >>> pci
> >>> > > 0000:00:1e.0:
> >>> > > > MEM
> >>> > > > > window:
> >>> > > > > > disabled pci
> 0000:00:1e.0: PREFETCH
> >>> > window:
> >>> > > disabled pci
> >>> > > > > 0000:00:01.0:
> >>> > > > > > PCI INT A -> GSI 28
> (level, low) ->
> >>> IRQ 28
> >>> > pci
> >>> > > > 0000:00:02.0: PCI
> >>> > > > > INT A
> >>> > > > > > -> GSI 29 (level,
> low) -> IRQ 29 pci
> >>> > 0000:00:03.0:
> >>> > > PCI INT
> >>> > > > A ->
> >>> > > > > GSI 24
> >>> > > > > > (level, low) -> IRQ
> 24 pci
> >>> 0000:00:04.0: PCI
> >>> > INT A
> >>> > > -> GSI
> >>> > > > 25
> >>> > > > > (level,
> >>> > > > > > low) -> IRQ 25 pci
> 0000:00:05.0: PCI
> >>> INT A
> >>> > -> GSI
> >>> > > 26
> >>> > > > (level, low)
> >>> > > > > -> IRQ
> >>> > > > > > 26 pci 0000:00:06.0:
> PCI INT A -> GSI
> >>> 27
> >>> > (level,
> >>> > > low) ->
> >>> > > > IRQ 27
> >>> > > > > pci
> >>> > > > > > 0000:00:07.0: PCI INT
> A -> GSI 30
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 30
> >>> > > > pci
> >>> > > > > > 0000:00:08.0: PCI INT
> A -> GSI 31
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 31
> >>> > > > pci
> >>> > > > > > 0000:00:09.0: PCI INT
> A -> GSI 32
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 32
> >>> > > > pci
> >>> > > > > > 0000:00:0a.0: PCI INT
> A -> GSI 33
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 33
> >>> > > > pci
> >>> > > > > > 0000:00:1c.0: PCI INT
> A -> GSI 16
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 16
> >>> > > > > > xen_allocate_pirq:
> returning irq 16
> >>> for gsi
> >>> > 16
> >>> > > Already
> >>> > > > setup the
> >>> > > > > GSI :16
> >>> > > > > > pci 0000:00:1c.4: PCI
> INT A -> GSI 16
> >>> > (level, low)
> >>> > > -> IRQ
> >>> > > > 16 pci
> >>> > > > > > 0000:00:1c.5: PCI INT
> B -> GSI 17
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 17
> >>> > > > NET:
> >>> > > > > Registered
> >>> > > > > > protocol family 2 IP
> route cache hash
> >>> table
> >>> > > entries: 65536
> >>> > > > > (order: 7,
> >>> > > > > > 524288 bytes) TCP
> established hash
> >>> table
> >>> > entries:
> >>> > > 262144
> >>> > > > (order:
> >>> > > > > 10,
> >>> > > > > > 4194304 bytes) TCP
> bind hash table
> >>> entries:
> >>> > 65536
> >>> > > (order:
> >>> > > > 10,
> >>> > > > > 4718592
> >>> > > > > > bytes) TCP: Hash
> tables configured
> >>> > (established
> >>> > > 262144
> >>> > > > bind
> >>> > > > > 65536) TCP
> >>> > > > > > reno registered NET:
> Registered
> >>> protocol
> >>> > family 1
> >>> > > pci
> >>> > > > > 0000:01:00.0:
> >>> > > > > > Disabling L0s pci
> 0000:01:00.1:
> >>> Disabling
> >>> > L0s
> >>> > > Trying to
> >>> > > > unpack
> >>> > > > > rootfs
> >>> > > > > > image as initramfs...
> Freeing initrd
> >>> memory:
> >>> > 6474k
> >>> > > freed
> >>> > > > DMA-API:
> >>> > > > > > preallocated 32768
> debug entries
> >>> DMA-API:
> >>> > debugging
> >>> > > > enabled by
> >>> > > > > kernel
> >>> > > > > > config PCI-DMA: Using
> software bounce
> >>> > buffering for
> >>> > > IO
> >>> > > > (SWIOTLB)
> >>> > > > > DMA:
> >>> > > > > > Placing 64MB software
> IO TLB between
> >>> > > ffff880007525000 -
> >>> > > > > ffff88000b525000
> >>> > > > > > DMA: software IO TLB
> at phys
> >>> 0x7525000 -
> >>> > 0xb525000
> >>> > > audit:
> >>> > > > > initializing
> >>> > > > > > netlink socket
> (disabled) type=2000
> >>> > > > audit(1268750702.035:1):
> >>> > > > > initialized
> >>> > > > > > HugeTLB registered 2
> MB page size,
> >>> > pre-allocated 0
> >>> > > pages
> >>> > > > VFS:
> >>> > > > > Disk
> >>> > > > > > quotas dquot_6.5.2
> Dquot-cache hash
> >>> table
> >>> > entries:
> >>> > > 512
> >>> > > > (order 0,
> >>> > > > > 4096
> >>> > > > > > bytes) msgmni has been
> set to 2970
> >>> > cryptomgr_test
> >>> > > used
> >>> > > > greatest
> >>> > > > > stack
> >>> > > > > > depth: 5864 bytes left
> cryptomgr_test
> >>> used
> >>> > greatest
> >>> > > stack
> >>> > > > depth:
> >>> > > > > 5816
> >>> > > > > > bytes left alg: No
> test for stdrng
> >>> (krng)
> >>> > Block
> >>> > > layer SCSI
> >>> > > > > generic (bsg)
> >>> > > > > > driver version 0.4
> loaded (major 252)
> >>> io
> >>> > scheduler
> >>> > > noop
> >>> > > > > registered io
> >>> > > > > > scheduler anticipatory
> registered io
> >>> > scheduler
> >>> > > deadline
> >>> > > > > registered io
> >>> > > > > > scheduler cfq
> registered (default)
> >>> > pci_hotplug: PCI
> >>> > > Hot
> >>> > > > Plug PCI
> >>> > > > > Core
> >>> > > > > > version: 0.5 pciehp
> >>> 0000:00:09.0:pcie04: HPC
> >>> > > vendor_id
> >>> > > > 8086
> >>> > > > > device_id
> >>> > > > > > 3410 ss_vid 0 ss_did 0
> pciehp: PCI
> >>> Express
> >>> > Hot Plug
> >>> > > > Controller
> >>> > > > > Driver
> >>> > > > > > version: 0.4 acpiphp:
> ACPI Hot Plug
> >>> PCI
> >>> > Controller
> >>> > > Driver
> >>> > > > > version: 0.5
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > acpiphp_glue: Slot 2
> already
> >>> registered by
> >>> > another
> >>> > > hotplug
> >>> > > > driver
> >>> > > > > > pci-stub: invalid id
> string "" input:
> >>> Sleep
> >>> > Button
> >>> > > as
> >>> > > > > >
> >>> > >
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
> >>> > > > ACPI:
> >>> > > > > Sleep
> >>> > > > > > Button [SLPB] input:
> Power Button as
> >>> > > > > >
> >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
> >>> > > Power
> >>> > > > Button
> >>> > > > > [PWRF]
> >>> > > > > > registering netback
> hpet_acpi_add: no
> >>> > address or
> >>> > > irqs in
> >>> > > > _CRS
> >>> > > > > > Non-volatile memory
> driver v1.3 Linux
> >>> > agpgart
> >>> > > interface
> >>> > > > v0.103
> >>> > > > > Serial:
> >>> > > > > > 8250/16550 driver, 4
> ports, IRQ
> >>> sharing
> >>> > enabled
> >>> > > > serial8250: ttyS1
> >>> > > > > at I/O
> >>> > > > > > 0x2f8 (irq = 3) is a
> 16550A brd:
> >>> module
> >>> > loaded
> >>> > > loop:
> >>> > > > module
> >>> > > > > loaded
> >>> > > > > > input: Macintosh mouse
> button
> >>> emulation as
> >>> > > > > /devices/virtual/input/input2
> >>> > > > > > ahci 0000:00:1f.2: PCI
> INT A -> GSI
> >>> 19
> >>> > (level, low)
> >>> > > -> IRQ
> >>> > > > 19
> >>> > > > > ahci
> >>> > > > > > 0000:00:1f.2: AHCI
> 0001.0200 32 slots
> >>> 6
> >>> > ports 3
> >>> > > Gbps 0x3f
> >>> > > > impl
> >>> > > > > SATA mode
> >>> > > > > > ahci 0000:00:1f.2:
> flags: 64bit ncq
> >>> sntf pm
> >>> > led clo
> >>> > > pio
> >>> > > > slum part
> >>> > > > > ccc
> >>> > > > > > ems scsi0 : ahci
> scsi1 : ahci scsi2
> >>> : ahci
> >>> > scsi3 :
> >>> > > ahci
> >>> > > > scsi4 :
> >>> > > > > ahci
> >>> > > > > > scsi5 : ahci ata1:
> SATA max UDMA/133
> >>> > irq_stat
> >>> > > 0x00400040,
> >>> > > > > connection
> >>> > > > > > status changed irq
> 2996 ata2: SATA
> >>> max
> >>> > UDMA/133
> >>> > > abar
> >>> > > > > m2048@0xb1a00000
> >>> > > > > > port 0xb1a00180 irq
> 2996 ata3: SATA
> >>> max
> >>> > UDMA/133
> >>> > > abar
> >>> > > > > m2048@0xb1a00000
> >>> > > > > > port 0xb1a00200 irq
> 2996 ata4: SATA
> >>> max
> >>> > UDMA/133
> >>> > > abar
> >>> > > > > m2048@0xb1a00000
> >>> > > > > > port 0xb1a00280 irq
> 2996 ata5: SATA
> >>> max
> >>> > UDMA/133
> >>> > > abar
> >>> > > > > m2048@0xb1a00000
> >>> > > > > > port 0xb1a00300 irq
> 2996 ata6: SATA
> >>> max
> >>> > UDMA/133
> >>> > > abar
> >>> > > > > m2048@0xb1a00000
> >>> > > > > > port 0xb1a00380 irq
> 2996 Fixed MDIO
> >>> Bus:
> >>> > probed
> >>> > > ehci_hcd:
> >>> > > > USB 2.0
> >>> > > > > > 'Enhanced' Host
> Controller (EHCI)
> >>> Driver
> >>> > ehci_hcd
> >>> > > > 0000:00:1a.7:
> >>> > > > > PCI INT
> >>> > > > > > C -> GSI 18 (level,
> low) -> IRQ 18
> >>> ehci_hcd
> >>> > > 0000:00:1a.7:
> >>> > > > EHCI
> >>> > > > > Host
> >>> > > > > > Controller ehci_hcd
> 0000:00:1a.7: new
> >>> USB
> >>> > bus
> >>> > > registered,
> >>> > > > > assigned bus
> >>> > > > > > number 1 ehci_hcd
> 0000:00:1a.7: debug
> >>> port 1
> >>> > > ehci_hcd
> >>> > > > > 0000:00:1a.7: irq
> >>> > > > > > 18, io mem 0xb1a02000
> ehci_hcd
> >>> 0000:00:1a.7:
> >>> > USB
> >>> > > 2.0
> >>> > > > started,
> >>> > > > > EHCI 1.00
> >>> > > > > > usb usb1: New USB
> device found,
> >>> > idVendor=1d6b,
> >>> > > > idProduct=0002 usb
> >>> > > > > usb1:
> >>> > > > > > New USB device
> strings: Mfr=3,
> >>> Product=2,
> >>> > > SerialNumber=1
> >>> > > > usb
> >>> > > > > usb1:
> >>> > > > > > Product: EHCI Host
> Controller usb
> >>> usb1:
> >>> > > Manufacturer:
> >>> > > > Linux
> >>> > > > > 2.6.32.9
> >>> > > > > > ehci_hcd usb usb1:
> SerialNumber:
> >>> > 0000:00:1a.7 usb
> >>> > > usb1:
> >>> > > > > configuration #1
> >>> > > > > > chosen from 1 choice
> hub 1-0:1.0: USB
> >>> hub
> >>> > found hub
> >>> > > > 1-0:1.0: 6
> >>> > > > > ports
> >>> > > > > > detected ehci_hcd
> 0000:00:1d.7: PCI
> >>> INT A ->
> >>> > GSI 23
> >>> > > > (level, low)
> >>> > > > > -> IRQ
> >>> > > > > > 23 ehci_hcd
> 0000:00:1d.7: EHCI Host
> >>> > Controller
> >>> > > ehci_hcd
> >>> > > > > 0000:00:1d.7:
> >>> > > > > > new USB bus
> registered, assigned bus
> >>> number
> >>> > 2
> >>> > > ehci_hcd
> >>> > > > > 0000:00:1d.7:
> >>> > > > > > debug port 1 ehci_hcd
> 0000:00:1d.7:
> >>> irq 23,
> >>> > io mem
> >>> > > > 0xb1a01000
> >>> > > > > ehci_hcd
> >>> > > > > > 0000:00:1d.7: USB 2.0
> started, EHCI
> >>> 1.00 usb
> >>> > usb2:
> >>> > > New USB
> >>> > > > device
> >>> > > > > found,
> >>> > > > > > idVendor=1d6b,
> idProduct=0002 usb
> >>> usb2: New
> >>> > USB
> >>> > > device
> >>> > > > strings:
> >>> > > > > Mfr=3,
> >>> > > > > > Product=2,
> SerialNumber=1 usb usb2:
> >>> Product:
> >>> > EHCI
> >>> > > Host
> >>> > > > Controller
> >>> > > > > usb
> >>> > > > > > usb2: Manufacturer:
> Linux 2.6.32.9
> >>> ehci_hcd
> >>> > usb
> >>> > > usb2:
> >>> > > > > SerialNumber:
> >>> > > > > > 0000:00:1d.7 usb usb2:
> configuration
> >>> #1
> >>> > chosen from
> >>> > > 1
> >>> > > > choice hub
> >>> > > > > > 2-0:1.0: USB hub found
> hub 2-0:1.0: 6
> >>> ports
> >>> > > detected
> >>> > > > ohci_hcd:
> >>> > > > > USB 1.1
> >>> > > > > > 'Open' Host Controller
> (OHCI) Driver
> >>> > uhci_hcd: USB
> >>> > > > Universal Host
> >>> > > > > > Controller Interface
> driver
> >>> > xen_allocate_pirq:
> >>> > > returning
> >>> > > > irq 16
> >>> > > > > for gsi
> >>> > > > > > 16 Already setup the
> GSI :16 uhci_hcd
> >>> > 0000:00:1a.0:
> >>> > > PCI
> >>> > > > INT A ->
> >>> > > > > GSI 16
> >>> > > > > > (level, low) -> IRQ
> 16 uhci_hcd
> >>> > 0000:00:1a.0: UHCI
> >>> > > Host
> >>> > > > > Controller
> >>> > > > > > uhci_hcd 0000:00:1a.0:
> new USB bus
> >>> > registered,
> >>> > > assigned
> >>> > > > bus
> >>> > > > > number 3
> >>> > > > > > uhci_hcd 0000:00:1a.0:
> irq 16, io
> >>> base
> >>> > 0x000020e0
> >>> > > usb
> >>> > > > usb3: New
> >>> > > > > USB
> >>> > > > > > device found,
> idVendor=1d6b,
> >>> idProduct=0001
> >>> > usb
> >>> > > usb3: New
> >>> > > > USB
> >>> > > > > device
> >>> > > > > > strings: Mfr=3,
> Product=2,
> >>> SerialNumber=1
> >>> > usb usb3:
> >>> > > > Product: UHCI
> >>> > > > > Host
> >>> > > > > > Controller usb usb3:
> Manufacturer:
> >>> Linux
> >>> > 2.6.32.9
> >>> > > uhci_hcd
> >>> > > > usb
> >>> > > > > usb3:
> >>> > > > > > SerialNumber:
> 0000:00:1a.0 usb usb3:
> >>> > configuration
> >>> > > #1
> >>> > > > chosen from
> >>> > > > > 1
> >>> > > > > > choice hub 3-0:1.0:
> USB hub found hub
> >>> > 3-0:1.0: 2
> >>> > > ports
> >>> > > > detected
> >>> > > > > uhci_hcd
> >>> > > > > > 0000:00:1a.1: PCI INT
> B -> GSI 21
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 21
> >>> > > > uhci_hcd
> >>> > > > > > 0000:00:1a.1: UHCI
> Host Controller
> >>> uhci_hcd
> >>> > > 0000:00:1a.1:
> >>> > > > new USB
> >>> > > > > bus
> >>> > > > > > registered, assigned
> bus number 4
> >>> uhci_hcd
> >>> > > 0000:00:1a.1:
> >>> > > > irq 21,
> >>> > > > > io base
> >>> > > > > > 0x000020c0 usb usb4:
> New USB device
> >>> found,
> >>> > > idVendor=1d6b,
> >>> > > > > idProduct=0001
> >>> > > > > > usb usb4: New USB
> device strings:
> >>> Mfr=3,
> >>> > Product=2,
> >>> > > > > SerialNumber=1 usb
> >>> > > > > > usb4: Product: UHCI
> Host Controller
> >>> usb
> >>> > usb4:
> >>> > > > Manufacturer: Linux
> >>> > > > > > 2.6.32.9 uhci_hcd usb
> usb4:
> >>> SerialNumber:
> >>> > > 0000:00:1a.1 usb
> >>> > > > usb4:
> >>> > > > > > configuration #1
> chosen from 1 choice
> >>> hub
> >>> > 4-0:1.0:
> >>> > > USB hub
> >>> > > > found
> >>> > > > > hub
> >>> > > > > > 4-0:1.0: 2 ports
> detected
> >>> xen_allocate_pirq:
> >>> > > returning irq
> >>> > > > 19 for
> >>> > > > > gsi 19
> >>> > > > > > Already setup the GSI
> :19 uhci_hcd
> >>> > 0000:00:1a.2:
> >>> > > PCI INT D
> >>> > > > -> GSI
> >>> > > > > 19
> >>> > > > > > (level, low) -> IRQ
> 19 uhci_hcd
> >>> > 0000:00:1a.2: UHCI
> >>> > > Host
> >>> > > > > Controller
> >>> > > > > > uhci_hcd 0000:00:1a.2:
> new USB bus
> >>> > registered,
> >>> > > assigned
> >>> > > > bus
> >>> > > > > number 5
> >>> > > > > > uhci_hcd 0000:00:1a.2:
> irq 19, io
> >>> base
> >>> > 0x000020a0
> >>> > > usb
> >>> > > > usb5: New
> >>> > > > > USB
> >>> > > > > > device found,
> idVendor=1d6b,
> >>> idProduct=0001
> >>> > usb
> >>> > > usb5: New
> >>> > > > USB
> >>> > > > > device
> >>> > > > > > strings: Mfr=3,
> Product=2,
> >>> SerialNumber=1
> >>> > usb usb5:
> >>> > > > Product: UHCI
> >>> > > > > Host
> >>> > > > > > Controller usb usb5:
> Manufacturer:
> >>> Linux
> >>> > 2.6.32.9
> >>> > > uhci_hcd
> >>> > > > usb
> >>> > > > > usb5:
> >>> > > > > > SerialNumber:
> 0000:00:1a.2 usb usb5:
> >>> > configuration
> >>> > > #1
> >>> > > > chosen from
> >>> > > > > 1
> >>> > > > > > choice hub 5-0:1.0:
> USB hub found hub
> >>> > 5-0:1.0: 2
> >>> > > ports
> >>> > > > detected
> >>> > > > > > xen_allocate_pirq:
> returning irq 23
> >>> for gsi
> >>> > 23
> >>> > > Already
> >>> > > > setup the
> >>> > > > > GSI :23
> >>> > > > > > uhci_hcd 0000:00:1d.0:
> PCI INT A ->
> >>> GSI 23
> >>> > (level,
> >>> > > low) ->
> >>> > > > IRQ 23
> >>> > > > > > uhci_hcd 0000:00:1d.0:
> UHCI Host
> >>> Controller
> >>> > > uhci_hcd
> >>> > > > > 0000:00:1d.0: new
> >>> > > > > > USB bus registered,
> assigned bus
> >>> number 6
> >>> > uhci_hcd
> >>> > > > 0000:00:1d.0:
> >>> > > > > irq 23,
> >>> > > > > > io base 0x00002080 usb
> usb6: New USB
> >>> device
> >>> > found,
> >>> > > > idVendor=1d6b,
> >>> > > > > > idProduct=0001 usb
> usb6: New USB
> >>> device
> >>> > strings:
> >>> > > Mfr=3,
> >>> > > > > Product=2,
> >>> > > > > > SerialNumber=1 usb
> usb6: Product:
> >>> UHCI Host
> >>> > > Controller usb
> >>> > > > usb6:
> >>> > > > > > Manufacturer: Linux
> 2.6.32.9 uhci_hcd
> >>> usb
> >>> > usb6:
> >>> > > > SerialNumber:
> >>> > > > > > 0000:00:1d.0 usb usb6:
> configuration
> >>> #1
> >>> > chosen from
> >>> > > 1
> >>> > > > choice hub
> >>> > > > > > 6-0:1.0: USB hub found
> hub 6-0:1.0: 2
> >>> ports
> >>> > > detected
> >>> > > > > xen_allocate_pirq:
> >>> > > > > > returning irq 19 for
> gsi 19 Already
> >>> setup
> >>> > the GSI
> >>> > > :19
> >>> > > > uhci_hcd
> >>> > > > > > 0000:00:1d.1: PCI INT
> B -> GSI 19
> >>> (level,
> >>> > low) ->
> >>> > > IRQ 19
> >>> > > > uhci_hcd
> >>> > > > > > 0000:00:1d.1: UHCI
> Host Controller
> >>> uhci_hcd
> >>> > > 0000:00:1d.1:
> >>> > > > new USB
> >>> > > > > bus
> >>> > > > > > registered, assigned
> bus number 7
> >>> uhci_hcd
> >>> > > 0000:00:1d.1:
> >>> > > > irq 19,
> >>> > > > > io base
> >>> > > > > > 0x00002060 usb usb7:
> New USB device
> >>> found,
> >>> > > idVendor=1d6b,
> >>> > > > > idProduct=0001
> >>> > > > > > usb usb7: New USB
> device strings:
> >>> Mfr=3,
> >>> > Product=2,
> >>> > > > > SerialNumber=1 usb
> >>> > > > > > usb7: Product: UHCI
> Host Controller
> >>> usb
> >>> > usb7:
> >>> > > > Manufacturer: Linux
> >>> > > > > > 2.6.32.9 uhci_hcd usb
> usb7:
> >>> SerialNumber:
> >>> > > 0000:00:1d.1 usb
> >>> > > > usb7:
> >>> > > > > > configuration #1
> chosen from 1 choice
> >>> hub
> >>> > 7-0:1.0:
> >>> > > USB hub
> >>> > > > found
> >>> > > > > hub
> >>> > > > > > 7-0:1.0: 2 ports
> detected
> >>> xen_allocate_pirq:
> >>> > > returning irq
> >>> > > > 18 for
> >>> > > > > gsi 18
> >>> > > > > > Already setup the GSI
> :18 uhci_hcd
> >>> > 0000:00:1d.2:
> >>> > > PCI INT C
> >>> > > > -> GSI
> >>> > > > > 18
> >>> > > > > > (level, low) -> IRQ
> 18 uhci_hcd
> >>> > 0000:00:1d.2: UHCI
> >>> > > Host
> >>> > > > > Controller
> >>> > > > > > uhci_hcd 0000:00:1d.2:
> new USB bus
> >>> > registered,
> >>> > > assigned
> >>> > > > bus
> >>> > > > > number 8
> >>> > > > > > uhci_hcd 0000:00:1d.2:
> irq 18, io
> >>> base
> >>> > 0x00002040
> >>> > > usb
> >>> > > > usb8: New
> >>> > > > > USB
> >>> > > > > > device found,
> idVendor=1d6b,
> >>> idProduct=0001
> >>> > usb
> >>> > > usb8: New
> >>> > > > USB
> >>> > > > > device
> >>> > > > > > strings: Mfr=3,
> Product=2,
> >>> SerialNumber=1
> >>> > usb usb8:
> >>> > > > Product: UHCI
> >>> > > > > Host
> >>> > > >
> >>> > >
> >>> > > References
> >>> > >
> >>> > > Visible links
> >>> > > 1. mailto:[20][21][22]pasik@xxxxxx
> >>> > > 2. mailto:[21][22][23]pasik@xxxxxx
> >>> > > 3. mailto:[22][23][24]pasik@xxxxxx
> >>> > > 4. mailto:[23][24][25]pasik@xxxxxx
> >>> > > 5. mailto:[24][25][26]pasik@xxxxxx
> >>> > > 6.
> >>> >
> >>>
> [25][26][27]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > 7.
> >>> >
> >>>
> [26][27][28]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > 8. mailto:[27][28][29]pasik@xxxxxx
> >>> > > 9.
> >>> >
> >>>
> [28][29][30]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > 10.
> >>> >
> >>>
> [29][30][31]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > 11. mailto:[30][31][32]pasik@xxxxxx
> >>> > > 12. mailto:[31][32][33]pasik@xxxxxx
> >>> > > 13.
> >>> >
> >>>
> [32][33][34]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > 14.
> >>> >
> >>>
> [33][34][35]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > 15. mailto:[34][35][36]pasik@xxxxxx
> >>> > > 16.
> >>> >
> >>>
> [35][36][37]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > > 17.
> >>> >
> >>>
> [36][37][38]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > > 18. mailto:[37][38][39]pasik@xxxxxx
> >>> >
> >>> > References
> >>> >
> >>> > Visible links
> >>> > 1. mailto:[39][40]pasik@xxxxxx
> >>> > 2. mailto:[40][41]pasik@xxxxxx
> >>> > 3. mailto:[41][42]pasik@xxxxxx
> >>> > 4. mailto:[42][43]pasik@xxxxxx
> >>> > 5. mailto:[43][44]pasik@xxxxxx
> >>> > 6. mailto:[44][45]pasik@xxxxxx
> >>> > 7.
> >>>
> [45][46]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 8.
> >>>
> [46][47]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 9. mailto:[47][48]pasik@xxxxxx
> >>> > 10.
> >>>
> [48][49]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 11.
> >>>
> [49][50]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 12. mailto:[50][51]pasik@xxxxxx
> >>> > 13. mailto:[51][52]pasik@xxxxxx
> >>> > 14.
> >>>
> [52][53]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 15.
> >>>
> [53][54]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 16. mailto:[54][55]pasik@xxxxxx
> >>> > 17.
> >>>
> [55][56]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 18.
> >>>
> [56][57]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 19. mailto:[57][58]pasik@xxxxxx
> >>> > 20. mailto:[58][59]pasik@xxxxxx
> >>> > 21. mailto:[59][60]pasik@xxxxxx
> >>> > 22. mailto:[60][61]pasik@xxxxxx
> >>> > 23. mailto:[61][62]pasik@xxxxxx
> >>> > 24. mailto:[62][63]pasik@xxxxxx
> >>> > 25.
> >>>
> [63][64]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 26.
> >>>
> [64][65]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 27. mailto:[65][66]pasik@xxxxxx
> >>> > 28.
> >>>
> [66][67]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 29.
> >>>
> [67][68]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 30. mailto:[68][69]pasik@xxxxxx
> >>> > 31. mailto:[69][70]pasik@xxxxxx
> >>> > 32.
> >>>
> [70][71]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 33.
> >>>
> [71][72]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 34. mailto:[72][73]pasik@xxxxxx
> >>> > 35.
> >>>
> [73][74]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> > 36.
> >>>
> [74][75]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> > 37. mailto:[75][76]pasik@xxxxxx
> >>>
> >>> References
> >>>
> >>> Visible links
> >>> 1. mailto:[77]pasik@xxxxxx
> >>> 2. mailto:[78]pasik@xxxxxx
> >>> 3. mailto:[79]pasik@xxxxxx
> >>> 4. mailto:[80]pasik@xxxxxx
> >>> 5. mailto:[81]pasik@xxxxxx
> >>> 6. mailto:[82]pasik@xxxxxx
> >>> 7. mailto:[83]pasik@xxxxxx
> >>> 8.
> [84]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 9.
> [85]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 10. mailto:[86]pasik@xxxxxx
> >>> 11.
> [87]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 12.
> [88]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 13. mailto:[89]pasik@xxxxxx
> >>> 14. mailto:[90]pasik@xxxxxx
> >>> 15.
> [91]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 16.
> [92]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 17. mailto:[93]pasik@xxxxxx
> >>> 18.
> [94]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 19.
> [95]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 20. mailto:[96]pasik@xxxxxx
> >>> 21. mailto:[97]pasik@xxxxxx
> >>> 22. mailto:[98]pasik@xxxxxx
> >>> 23. mailto:[99]pasik@xxxxxx
> >>> 24. mailto:[100]pasik@xxxxxx
> >>> 25. mailto:[101]pasik@xxxxxx
> >>> 26.
> [102]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 27.
> [103]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 28. mailto:[104]pasik@xxxxxx
> >>> 29.
> [105]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 30.
> [106]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 31. mailto:[107]pasik@xxxxxx
> >>> 32. mailto:[108]pasik@xxxxxx
> >>> 33.
> [109]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 34.
> [110]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 35. mailto:[111]pasik@xxxxxx
> >>> 36.
> [112]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 37.
> [113]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 38. mailto:[114]pasik@xxxxxx
> >>> 39. mailto:[115]pasik@xxxxxx
> >>> 40. mailto:[116]pasik@xxxxxx
> >>> 41. mailto:[117]pasik@xxxxxx
> >>> 42. mailto:[118]pasik@xxxxxx
> >>> 43. mailto:[119]pasik@xxxxxx
> >>> 44. mailto:[120]pasik@xxxxxx
> >>> 45.
> [121]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 46.
> [122]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 47. mailto:[123]pasik@xxxxxx
> >>> 48.
> [124]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 49.
> [125]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 50. mailto:[126]pasik@xxxxxx
> >>> 51. mailto:[127]pasik@xxxxxx
> >>> 52.
> [128]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 53.
> [129]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 54. mailto:[130]pasik@xxxxxx
> >>> 55.
> [131]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 56.
> [132]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 57. mailto:[133]pasik@xxxxxx
> >>> 58. mailto:[134]pasik@xxxxxx
> >>> 59. mailto:[135]pasik@xxxxxx
> >>> 60. mailto:[136]pasik@xxxxxx
> >>> 61. mailto:[137]pasik@xxxxxx
> >>> 62. mailto:[138]pasik@xxxxxx
> >>> 63.
> [139]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 64.
> [140]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 65. mailto:[141]pasik@xxxxxx
> >>> 66.
> [142]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 67.
> [143]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 68. mailto:[144]pasik@xxxxxx
> >>> 69. mailto:[145]pasik@xxxxxx
> >>> 70.
> [146]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 71.
> [147]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 72. mailto:[148]pasik@xxxxxx
> >>> 73.
> [149]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> >>> 74.
> [150]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> >>> 75. mailto:[151]pasik@xxxxxx
> >>>
> >>
> >>
> >
>
> References
>
> Visible links
> 1. mailto:pasik@xxxxxx
> 2. mailto:pasik@xxxxxx
> 3. mailto:pasik@xxxxxx
> 4. mailto:pasik@xxxxxx
> 5. mailto:pasik@xxxxxx
> 6. mailto:pasik@xxxxxx
> 7. mailto:pasik@xxxxxx
> 8. mailto:pasik@xxxxxx
> 9. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 10. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 11. mailto:pasik@xxxxxx
> 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 13. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 14. mailto:pasik@xxxxxx
> 15. mailto:pasik@xxxxxx
> 16. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 17. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 18. mailto:pasik@xxxxxx
> 19. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 20. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 21. mailto:pasik@xxxxxx
> 22. mailto:pasik@xxxxxx
> 23. mailto:pasik@xxxxxx
> 24. mailto:pasik@xxxxxx
> 25. mailto:pasik@xxxxxx
> 26. mailto:pasik@xxxxxx
> 27. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 28. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 29. mailto:pasik@xxxxxx
> 30. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 31. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 32. mailto:pasik@xxxxxx
> 33. mailto:pasik@xxxxxx
> 34. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 35. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 36. mailto:pasik@xxxxxx
> 37. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 38. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 39. mailto:pasik@xxxxxx
> 40. mailto:pasik@xxxxxx
> 41. mailto:pasik@xxxxxx
> 42. mailto:pasik@xxxxxx
> 43. mailto:pasik@xxxxxx
> 44. mailto:pasik@xxxxxx
> 45. mailto:pasik@xxxxxx
> 46. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 47. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 48. mailto:pasik@xxxxxx
> 49. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 50. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 51. mailto:pasik@xxxxxx
> 52. mailto:pasik@xxxxxx
> 53. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 54. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 55. mailto:pasik@xxxxxx
> 56. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 57. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 58. mailto:pasik@xxxxxx
> 59. mailto:pasik@xxxxxx
> 60. mailto:pasik@xxxxxx
> 61. mailto:pasik@xxxxxx
> 62. mailto:pasik@xxxxxx
> 63. mailto:pasik@xxxxxx
> 64. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 65. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 66. mailto:pasik@xxxxxx
> 67. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 68. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 69. mailto:pasik@xxxxxx
> 70. mailto:pasik@xxxxxx
> 71. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 72. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 73. mailto:pasik@xxxxxx
> 74. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 75. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 76. mailto:pasik@xxxxxx
> 77. mailto:pasik@xxxxxx
> 78. mailto:pasik@xxxxxx
> 79. mailto:pasik@xxxxxx
> 80. mailto:pasik@xxxxxx
> 81. mailto:pasik@xxxxxx
> 82. mailto:pasik@xxxxxx
> 83. mailto:pasik@xxxxxx
> 84. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 85. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 86. mailto:pasik@xxxxxx
> 87. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 88. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 89. mailto:pasik@xxxxxx
> 90. mailto:pasik@xxxxxx
> 91. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 92. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 93. mailto:pasik@xxxxxx
> 94. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 95. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 96. mailto:pasik@xxxxxx
> 97. mailto:pasik@xxxxxx
> 98. mailto:pasik@xxxxxx
> 99. mailto:pasik@xxxxxx
> 100. mailto:pasik@xxxxxx
> 101. mailto:pasik@xxxxxx
> 102. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 103. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 104. mailto:pasik@xxxxxx
> 105. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 106. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 107. mailto:pasik@xxxxxx
> 108. mailto:pasik@xxxxxx
> 109. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 110. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 111. mailto:pasik@xxxxxx
> 112. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 113. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 114. mailto:pasik@xxxxxx
> 115. mailto:pasik@xxxxxx
> 116. mailto:pasik@xxxxxx
> 117. mailto:pasik@xxxxxx
> 118. mailto:pasik@xxxxxx
> 119. mailto:pasik@xxxxxx
> 120. mailto:pasik@xxxxxx
> 121. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 122. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 123. mailto:pasik@xxxxxx
> 124. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 125. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 126. mailto:pasik@xxxxxx
> 127. mailto:pasik@xxxxxx
> 128. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 129. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 130. mailto:pasik@xxxxxx
> 131. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 132. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 133. mailto:pasik@xxxxxx
> 134. mailto:pasik@xxxxxx
> 135. mailto:pasik@xxxxxx
> 136. mailto:pasik@xxxxxx
> 137. mailto:pasik@xxxxxx
> 138. mailto:pasik@xxxxxx
> 139. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 140. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 141. mailto:pasik@xxxxxx
> 142. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 143. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 144. mailto:pasik@xxxxxx
> 145. mailto:pasik@xxxxxx
> 146. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 147. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 148. mailto:pasik@xxxxxx
> 149. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 150. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 151. mailto:pasik@xxxxxx
mar_22.doc
Description: MS-Word document
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9, (continued)
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9, kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Jeremy Fitzhardinge
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(),
kishore kumar <=
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- [Xen-users] unsubscribe, Graham, Matthew S (Matthew)
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Konrad Rzeszutek Wilk
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
|
|
|
Home