|
xen-users
Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_I
|
Attached is the captured file.
Now the machine booted up. :) 2.6.32.10 is booted.
But I dont see xen up and running.
Whe I open Virtual Machine Manager I dont see xen running. (ATTACHED IS THE SCREEN SHOT).
On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote:
> On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote:
>> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote:
>>
>>> Attached is the capture log after changing the grub.conf to
>>>
>>> ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset
>>> initcall_debug debug swiotlb=force apic=debug loglevel=10
>>>
>>> for the dom 0 kernel command line.
>>>
>>>
>> Hmm, interesting. Now it seems to crash in a different place.
>>
>> Jeremy: Have you seen this one earlier?
>>
>
> No, but it looks like the result of "apic=debug" on the kernel command
> line. That won't do anything useful (the kernel has no APICs, they all
> belong to Xen), and can only cause harm. As it appears to have done.
>
Ok, my bad.
So please remove the "apic=debug" from the dom0 kernel cmdline and try again.
It should look like this:
ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
-- Pasi
> J
>
>> .... IRQ redirection table:
>> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
>> 00 000 0 0 0 0 0 0 0 00
>> IRQ to pin mappings:
>> BUG: unable to handle kernel NULL pointer dereference at (null)
>> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
>> PGD 0
>> Oops: 0000 [#1] SMP
>> last sysfs file:
>> CPU 0
>> Modules linked in:
>> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2
>> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
>> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286
>> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01
>> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000
>> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000
>> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000
>> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
>> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000
>> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
>> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660
>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000)
>> Stack:
>> ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8
>> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002
>> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332
>> Call Trace:
>> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
>> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
>> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
>> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
>> [<ffffffff81013eaa>] child_rip+0xa/0x20
>> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
>> [<ffffffff81013810>] ? restore_args+0x0/0x30
>> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
>> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
>> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48> 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4
>> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
>> RSP<ffff880064edbe20>
>> CR2: 0000000000000000
>> ---[ end trace 0007ad9d59420718 ]---
>> swapper used greatest stack depth: 4168 bytes left
>> Kernel panic - not syncing: Attempted to kill init!
>> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2
>> Call Trace:
>> [<ffffffff8105b747>] panic+0xa5/0x167
>> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
>> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701
>> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1
>> [<ffffffff8108f823>] ? lock_release+0x179/0x184
>> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
>> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
>> [<ffffffff8105efa7>] do_exit+0x7e/0x701
>> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
>> [<ffffffff8147764c>] oops_end+0xbf/0xc7
>> [<ffffffff81038a02>] no_context+0x1f1/0x200
>> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
>> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4
>> [<ffffffff8100f452>] ? check_events+0x12/0x20
>> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15
>> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2
>> [<ffffffff814769d5>] page_fault+0x25/0x30
>> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500
>> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
>> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
>> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
>> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
>> [<ffffffff81013eaa>] child_rip+0xa/0x20
>> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
>> [<ffffffff81013810>] ? restore_args+0x0/0x30
>> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
>> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
>>
>>
>> -- Pasi
>>
>>
>>
>>>
>>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@xxxxxx> wrote:
>>>
>>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote:
>>> > pvdisplay does not work in my RHEL machine.
>>> >
>>> > I did pvscan.
>>> > below is the output.
>>> >
>>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free]
>>> >
>>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ]
>>> >
>>>
>>> Ok so /dev/sda2 is the correct device holding the VolGroup01.
>>>
>>> Looking at your latest capture.doc I see this:
>>>
>>> Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen
>>> nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10
>>>
>>> So your root= parameter is wrong! Edit grub.conf and replace it with the
>>> actual root device:
>>> root=/dev/VolGroup01/LogVol00
>>>
>>> -- Pasi
>>>
>>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen
>>> <[1][2]pasik@xxxxxx> wrote:
>>> >
>>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote:
>>> > > I did the below steps for pvops dom 0 kernel.
>>> > >
>>> > > make menuconfig
>>> > > make bzImage
>>> > > make modules
>>> > > make modules_install
>>> > > cp -a .config /boot/config-2.6.32.10
>>> > > cp -a System.map /boot/System.map-2.6.32.10
>>> > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10
>>> > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img
>>> > 2.6.32.10
>>> > > I tried root=/dev/VolGroup01/LogVol00 .
>>> > >
>>> >
>>> > Ok.
>>> >
>>> > Please run "pvdisplay" to see which actual partition is the LVM
>>> PV for
>>> > your
>>> > volume group.
>>> >
>>> > Also if you're running Fedora 12 you could try generating an
>>> initrd
>>> > image
>>> > with dracut instead of mkinitrd.
>>> >
>>> > -- Pasi
>>> >
>>> > >
>>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen
>>> > <[1][2][3]pasik@xxxxxx> wrote:
>>> > >
>>> > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar
>>> wrote:
>>> > > > Here is the output of df -h and cat /etc/fstab of my
>>> > machine.
>>> > > >
>>> > >
>>> > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and
>>> > > root=/dev/VolGroup01/LogVol00 arguments for the dom0
>>> kernel?
>>> > >
>>> > > How did you generate the initrd image for the dom0 kernel?
>>> > >
>>> > > Anyway this sounds like a grub.conf or initrd problem, not
>>> Xen or
>>> > pvops
>>> > > dom0 kernel kernel problem.
>>> > >
>>> > > -- Pasi
>>> > >
>>> > > > Please let me know your thoughts.
>>> > > >
>>> > > > [root@localhost kishore]# df -h
>>> > > >
>>> > > > Filesystem Size Used Avail Use% Mounted on
>>> > > >
>>> > > > /dev/mapper/VolGroup01-LogVol00
>>> > > >
>>> > > > 223G 29G 182G 14%
>>> /
>>> > > >
>>> > > > /dev/sda1 99M 81M 13M 87% /boot
>>> > > >
>>> > > > tmpfs 757M 0 757M 0% /dev/shm
>>> > > >
>>> > > > [root@localhost kishore]# cat /etc/fstab
>>> > > >
>>> > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
>>> > > >
>>> > > > LABEL=/boot /boot ext3 defaults 1 2
>>> > > >
>>> > > > tmpfs /dev/shm tmpfs defaults 0 0
>>> > > >
>>> > > > devpts /dev/pts devpts gid=5,mode=620 0 0
>>> > > >
>>> > > > sysfs /sys sysfs defaults 0 0
>>> > > >
>>> > > > proc /proc proc defaults 0 0
>>> > > >
>>> > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0
>>> > > >
>>> > > > [root@localhost kishore]#
>>> > > >
>>> > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen
>>> > > <[1][2][3][4]pasik@xxxxxx> wrote:
>>> > > >
>>> > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore
>>> kumar
>>> > wrote:
>>> > > > > I am not sure. Can you please let me know how
>>> to
>>> > check
>>> > > this? any
>>> > > > command
>>> > > > > ??
>>> > > >
>>> > > > well simple "df -h" will show it. and also "cat
>>> > /etc/fstab".
>>> > > > You can also check it from your grub
>>> configuration.. from
>>> > the
>>> > > working
>>> > > > baremetal (non-Xen) entry.
>>> > > >
>>> > > > -- Pasi
>>> > > > >
>>> > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi
>>> Kärkkäinen
>>> > > > <[1][2][3][4][5]pasik@xxxxxx> wrote:
>>> > > > >
>>> > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700,
>>> kishore
>>> > kumar
>>> > > wrote:
>>> > > > > > attached is the log captured in with
>>> the word
>>> > > document .
>>> > > > > >
>>> > > > >
>>> > > > > Scanning logical volumes
>>> > > > > Reading all physical volumes. This may
>>> take a
>>> > while...
>>> > > > > Activating logical volumes
>>> > > > > Volume group "VolGroup01" not found
>>> > > > > Trying to resume from
>>> /dev/VolGroup01/LogVol01
>>> > > > > Unable to access resume device
>>> > (/dev/VolGroup01/LogVol01)
>>> > > > > Creating root device.
>>> > > > > Mounting root filesystem.
>>> > > > > mount: could not find filesystem '/dev/root'
>>> > > > > Setting up other filesystems.
>>> > > > > Setting up new root fs
>>> > > > > setuproot: moving /dev failed: No such file
>>> or
>>> > directory
>>> > > > > no fstab.sys, mounting internal defaults
>>> > > > > setuproot: error mounting /proc: No such
>>> file or
>>> > directory
>>> > > > > setuproot: error mounting /sys: No such file
>>> or
>>> > directory
>>> > > > > Switching to new root and running init.
>>> > > > > unmounting old /dev
>>> > > > > unmounting old /proc
>>> > > > > unmounting old /sys
>>> > > > > switchroot: mount failed: No such file or
>>> directory
>>> > > > > init used greatest stack depth: 4088 bytes
>>> left
>>> > > > > Kernel panic - not syncing: Attempted to
>>> kill init!
>>> > > > >
>>> > > > > So it seems it gets all the way to executing
>>> the
>>> > initrd
>>> > > image,
>>> > > > > which then fails to mount the root fs.
>>> > > > >
>>> > > > > Earlier in the log:
>>> > > > > ata1: SATA link up 3.0 Gbps (SStatus 123
>>> SControl
>>> > 300)
>>> > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380,
>>> STBOA3AA,
>>> > max
>>> > > UDMA/133
>>> > > > > ata1.00: 488397168 sectors, multi 0: LBA48
>>> NCQ
>>> > (depth
>>> > > 31/32), AA
>>> > > > > ata1.00: configured for UDMA/133
>>> > > > > scsi 0:0:0:0: Direct-Access ATA
>>> Hitachi
>>> > HDT72102
>>> > > STBO
>>> > > > PQ: 0
>>> > > > > ANSI: 5
>>> > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0
>>> > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical
>>> > blocks: (250
>>> > > GB/232
>>> > > > GiB)
>>> > > > > sd 0:0:0:0: [sda] Write Protect is off
>>> > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> > > > > sd 0:0:0:0: [sda] Write cache: enabled, read
>>> cache:
>>> > > enabled,
>>> > > > doesn't
>>> > > > > support DPO or FUA
>>> > > > > sda: sda1 sda2
>>> > > > > sd 0:0:0:0: [sda] Attached SCSI disk
>>> > > > >
>>> > > > > so /dev/sda was detected. Is your root lvm
>>> volume
>>> > on
>>> > > /dev/sda ?
>>> > > > > Is /dev/VolGroup01/LogVol01 really your root
>>> fs?
>>> > > > >
>>> > > > > -- Pasi
>>> > > > >
>>> > > > > >
>>> > > > > >
>>> > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi
>>> > Kärkkäinen
>>> > > > > <[1][2][3][4][5][6]pasik@xxxxxx> wrote:
>>> > > > > >
>>> > > > > > On Tue, Mar 16, 2010 at 02:56:06PM
>>> -0700,
>>> > kishore
>>> > > kumar
>>> > > > wrote:
>>> > > > > > > Please find the attached log
>>> file after
>>> > fixing
>>> > > the
>>> > > > dom 0
>>> > > > > kernel cmd
>>> > > > > > line
>>> > > > > > > as below
>>> > > > > > >
>>> > > > > > > ro root=/dev/VolGroup01/LogVol00
>>> > console=hvc0
>>> > > > > earlyprintk=xen
>>> > > > > > nomodeset
>>> > > > > > >
>>> > > > > >
>>> > > > > > There's something wrong with the log,
>>> the
>>> > dom0
>>> > > kernel
>>> > > > parts are
>>> > > > > all on
>>> > > > > > one line..
>>> > > > > > It's really difficult to read it.
>>> > > > > >
>>> > > > > > -- Pasi
>>> > > > > >
>>> > > > > > > Thanks
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > On Tue, Mar 16, 2010 at 2:29 PM,
>>> Pasi
>>> > > Kärkkäinen
>>> > > > > > <[1][2][3][4][5][6][7]pasik@xxxxxx>
>>> wrote:
>>> > > > > > >
>>> > > > > > > On Tue, Mar 16, 2010 at
>>> 02:16:22PM
>>> > -0700,
>>> > > kishore
>>> > > > kumar
>>> > > > > wrote:
>>> > > > > > > > I did below steps.
>>> > > > > > > >
>>> > > > > > > >
>>> > > > > > > > I pulled DOM 0 kernel
>>> from
>>> > > > > > > > git clone
>>> > > > > > >
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > > > > > > linux-2.6-xen
>>> > > > > > > >
>>> > > > > > > > cd linux-2.6-xen
>>> > > > > > > >
>>> > > > > > > > make clean
>>> > > > > > > >
>>> > > > > > > > cp -a .config .config-old
>>> > > > > > > >
>>> > > > > > > > wget -O .config
>>> > > > > > > >
>>> > > > > > >
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> [2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > > > > > >
>>> > > > > > > > make oldconfig
>>> > > > > > > >
>>> > > > > > > > make bzImage
>>> > > > > > > >
>>> > > > > > > > make modules
>>> > > > > > > >
>>> > > > > > > > make modules_install
>>> > > > > > > >
>>> > > > > > > > cp -a .config
>>> > /boot/config-2.6.32.9
>>> > > > > > > >
>>> > > > > > > > cp -a System.map
>>> > > /boot/System.map-2.6.32.9
>>> > > > > > > >
>>> > > > > > > > cp -a
>>> arch/x86/boot/bzImage
>>> > > > /boot/vmlinuz-2.6.32.9
>>> > > > > > > >
>>> > > > > > > > and modified the
>>> grub.conf as
>>> > below
>>> > > > > > > >
>>> > > > > > > >
>>> > > > > > > > Root(hd0,0)
>>> > > > > > > >
>>> > > > > > > > kernel /xen.gz
>>> console=vga,com1
>>> > > > com1=115200,8n1
>>> > > > > msi=1
>>> > > > > > iommu=1
>>> > > > > > > >
>>> > > > > > > > module /vmlinuz-2.6.32.9
>>> ro
>>> > > > > root=/dev/VolGroup01/LogVo100
>>> > > > > > rhgb
>>> > > > > > > quiet
>>> > > > > > > >
>>> > > > > > > > module
>>> /initrd-2.6.32.9.img
>>> > > > > > > >
>>> > > > > > > >
>>> > > > > > > > and rebooted the machine.
>>> Then
>>> > It
>>> > > booted with
>>> > > > some
>>> > > > > xen
>>> > > > > > messages
>>> > > > > > > and
>>> > > > > > > > stopped. Those were the
>>> > messages
>>> > > captured
>>> > > > from
>>> > > > > serial
>>> > > > > > console.
>>> > > > > > > >
>>> > > > > > > > Please let me know if I
>>> did
>>> > something
>>> > > wrong
>>> > > > here.
>>> > > > > > > >
>>> > > > > > >
>>> > > > > > > Please fix the kernel cmdline
>>> based
>>> > on my
>>> > > earlier
>>> > > > email,
>>> > > > > and
>>> > > > > > capture and
>>> > > > > > > post the
>>> > > > > > > serial console log again!
>>> > > > > > >
>>> > > > > > > -- Pasi
>>> > > > > > > >
>>> > > > > > > >
>>> > > > > > > > On Tue, Mar 16, 2010 at
>>> 1:20 PM,
>>> > Pasi
>>> > > > Kärkkäinen
>>> > > > > > >
>>> <[3][4][5][6][7][8][9][10]pasik@xxxxxx>
>>> > wrote:
>>> > > > > > > >
>>> > > > > > > > On Tue, Mar 16, 2010 at
>>> > 01:16:28PM
>>> > > -0700,
>>> > > > Jeremy
>>> > > > > > Fitzhardinge
>>> > > > > > > wrote:
>>> > > > > > > > > On 03/16/2010 12:48
>>> PM, Pasi
>>> > > Kärkkäinen
>>> > > > wrote:
>>> > > > > > > > >> On Tue, Mar 16, 2010
>>> at
>>> > 09:43:44PM
>>> > > +0200,
>>> > > > Pasi
>>> > > > > > Kärkkäinen
>>> > > > > > > wrote:
>>> > > > > > > > >>
>>> > > > > > > > >>> On Tue, Mar 16,
>>> 2010 at
>>> > > 10:32:17AM
>>> > > > -0700,
>>> > > > > kishore
>>> > > > > > kumar
>>> > > > > > > wrote:
>>> > > > > > > > >>>
>>> > > > > > > > >>>> Attached is
>>> the
>>> > output
>>> > > captured
>>> > > > from
>>> > > > > serial
>>> > > > > > console.
>>> > > > > > > > >>>>
>>> > > > > > > > >>>> Machine does
>>> not boot
>>> > after
>>> > > > compiling xen
>>> > > > > 3.4.3
>>> > > > > > with
>>> > > > > > > pv_ops dom
>>> > > > > > > > 0 kernel.
>>> > > > > > > > >>>>
>>> > > > > > > > >>>> Please let me
>>> know
>>> > what is
>>> > > going
>>> > > > wrong
>>> > > > > here.
>>> > > > > > > > >>>>
>>> > > > > > > > >>>>
>>> > > > > > > > >>> Ok this looks like
>>> a bug
>>> > that is
>>> > > already
>>> > > > being
>>> > > > > sorted
>>> > > > > > out on
>>> > > > > > > > xen-devel mailinglist.
>>> > > > > > > > >>> I added CC to
>>> xen-devel.
>>> > > > > > > > >>>
>>> > > > > > > > >>>
>>> > > > > > > > >>
>>> > > > > > > > >
>>> > > > > > > > > Those messages are
>>> not a
>>> > problem in
>>> > > > themselves,
>>> > > > > but the
>>> > > > > > related
>>> > > > > > > > problem
>>> > > > > > > > > is believed to be
>>> fixed in
>>> > current
>>> > > > > xen/stable-2.6.32.x.
>>> > > > > > It
>>> > > > > > > looks like
>>> > > > > > > > > the output stops
>>> there
>>> > because the
>>> > > Xen
>>> > > > console
>>> > > > > isn't set
>>> > > > > > up
>>> > > > > > > properly
>>> > > > > > > > for
>>> > > > > > > > > some reason.
>>> > > > > > > > >
>>> > > > > > > >
>>> > > > > > > > Yeah, remove "rhgb
>>> quiet" from
>>> > the
>>> > > options..
>>> > > > the
>>> > > > > dom0
>>> > > > > > kernel
>>> > > > > > > cmdline
>>> > > > > > > > should be like this:
>>> > > > > > > > ro
>>> > root=/dev/VolGroup01/LogVol00
>>> > > > console=hvc0
>>> > > > > > earlyprintk=xen
>>> > > > > > > nomodeset
>>> > > > > > > > -- Pasi
>>> > > > > > > >
>>> > > > > > > > References
>>> > > > > > > >
>>> > > > > > > > Visible links
>>> > > > > > > > 1.
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> [5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > > > > > > 2.
>>> > > > > > >
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> [6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > > > > > > 3.
>>> > mailto:[7][8][9][10][11][12][13]pasik@xxxxxx
>>> > > > > > >
>>> > > > > > > References
>>> > > > > > >
>>> > > > > > > Visible links
>>> > > > > > > 1.
>>> > mailto:[9][10][11][12][13][14]pasik@xxxxxx
>>> > > > > > > 2.
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> [10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > > > > > 3.
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> [11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > > > > > 4.
>>> > mailto:[12][13][14][15][16][17]pasik@xxxxxx
>>> > > > > > > 5.
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> [13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > > > > > 6.
>>> > > > > >
>>> > > > >
>>> > > >
>>> > >
>>> >
>>> [14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > > > > > 7.
>>> > mailto:[15][16][17][18][19][20]pasik@xxxxxx
>>> > > > > > > Asserting Post complete GPIO!!!
>>> > > > > > > Transfer control to CSM 16-bit
>>> binary for
>>> > legacy
>>> > > boot
>>> > > > > > > __ __ _____ _ _
>>> _____
>>> > > _ _
>>> > > > > > > \ \/ /___ _ __ |___ /| || |
>>> |___ /
>>> > _ __
>>> > > ___| || |
>>> > > > _
>>> > > > > __ _
>>> > > > > > __ ___
>>> > > > > > > \ // _ \ '_ \ |_ \| || |_
>>> |_ \ __|
>>> > '__/
>>> > > __| ||
>>> > > > |_ __|
>>> > > > > '_ \|
>>> > > > > > '__/ _ \
>>> > > > > > > / \ __/ | | | ___) |__ _|
>>> ___) |__|
>>> > | |
>>> > > (__|__
>>> > > > _|__|
>>> > > > > |_) | |
>>> > > > > > | __/
>>> > > > > > > /_/\_\___|_| |_| |____(_)
>>> |_|(_)____/
>>> > |_|
>>> > > \___| |_|
>>> > > > |
>>> > > > > .__/|_|
>>> > > > > > \___|
>>> > > > > > >
>>> > > > |_|
>>> > > > > > > (XEN) Xen version 3.4.3-rc4-pre
>>> > > (kishore@localdomain)
>>> > > > (gcc
>>> > > > > version
>>> > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46))
>>> Mon Mar
>>> > 15
>>> > > 13:44:31 PDT
>>> > > > 2010
>>> > > > > > > (XEN) Latest ChangeSet: Tue Mar 09
>>> > 18:15:52 2010
>>> > > +0000
>>> > > > > > 19924:6e72f8c3c017
>>> > > > > > > (XEN) Command line:
>>> console=vga,com1
>>> > > com1=115200,8n1
>>> > > > msi=1
>>> > > > > iommu=1
>>> > > > > > > (XEN) Video information:
>>> > > > > > > (XEN) VGA is text mode 80x25, font
>>> 8x16
>>> > > > > > > (XEN) VBE/DDC methods: none; EDID
>>> > transfer time:
>>> > > 0
>>> > > > seconds
>>> > > > > > > (XEN) EDID info not retrieved
>>> because no
>>> > DDC
>>> > > retrieval
>>> > > > method
>>> > > > > > detected
>>> > > > > > > (XEN) Disc information:
>>> > > > > > > (XEN) Found 1 MBR signatures
>>> > > > > > > (XEN) Found 1 EDD information
>>> structures
>>> > > > > > > (XEN) Xen-e820 RAM map:
>>> > > > > > > (XEN) 0000000000000000 -
>>> 000000000009d000
>>> > > (usable)
>>> > > > > > > (XEN) 000000000009d000 -
>>> 00000000000a0000
>>> > > (reserved)
>>> > > > > > > (XEN) 00000000000e0000 -
>>> 0000000000100000
>>> > > (reserved)
>>> > > > > > > (XEN) 0000000000100000 -
>>> 000000006d597000
>>> > > (usable)
>>> > > > > > > (XEN) 000000006d597000 -
>>> 000000006d686000
>>> > > (reserved)
>>> > > > > > > (XEN) 000000006d686000 -
>>> 000000006f598000
>>> > > (usable)
>>> > > > > > > (XEN) 000000006f598000 -
>>> 000000006f59a000
>>> > > (reserved)
>>> > > > > > > (XEN) 000000006f59a000 -
>>> 000000006f5af000
>>> > (ACPI
>>> > > NVS)
>>> > > > > > > (XEN) 000000006f5af000 -
>>> 000000006f5d9000
>>> > > (reserved)
>>> > > > > > > (XEN) 000000006f5d9000 -
>>> 000000006f5f9000
>>> > (ACPI
>>> > > data)
>>> > > > > > > (XEN) 000000006f5f9000 -
>>> 000000006f6df000
>>> > (ACPI
>>> > > NVS)
>>> > > > > > > (XEN) 000000006f6df000 -
>>> 000000006f700000
>>> > (ACPI
>>> > > data)
>>> > > > > > > (XEN) 000000006f700000 -
>>> 0000000080000000
>>> > > (reserved)
>>> > > > > > > (XEN) 00000000a0000000 -
>>> 00000000b0000000
>>> > > (reserved)
>>> > > > > > > (XEN) 00000000fc000000 -
>>> 00000000fd000000
>>> > > (reserved)
>>> > > > > > > (XEN) 00000000fed1c000 -
>>> 00000000fed20000
>>> > > (reserved)
>>> > > > > > > (XEN) 00000000ffc00000 -
>>> 0000000100000000
>>> > > (reserved)
>>> > > > > > > (XEN) System RAM: 1780MB
>>> (1823000kB)
>>> > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2
>>> INTEL
>>> > )
>>> > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1
>>> INTEL
>>> > THRLY
>>> > > > 0
>>> > > > > > 1000013)
>>> > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4
>>> INTEL
>>> > THRLY
>>> > > > 0
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2
>>> INTEL
>>> > THRLY
>>> > > > 3
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040
>>> > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2
>>> INTEL
>>> > THRLY
>>> > > > 0
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1
>>> INTEL
>>> > THRLY
>>> > > > 1
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1
>>> INTEL
>>> > THRLY
>>> > > > 1
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1
>>> INTEL
>>> > THRLY
>>> > > > 1
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1
>>> INTEL
>>> > THRLY
>>> > > > 0
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC
>>> (r1
>>> > INTEL SSDT
>>> > > PM
>>> > > > 4000
>>> > > > > INTL
>>> > > > > > 20061109)
>>> > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1
>>> INTEL
>>> > THRLY
>>> > > > 1
>>> > > > > MSFT
>>> > > > > > 100000D)
>>> > > > > > > (XEN) Domain heap initialised
>>> > > > > > > (XEN) Processor #0 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #2 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #4 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #16 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #18 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #20 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #1 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #3 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #5 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #17 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #19 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) Processor #21 6:12 APIC
>>> version 21
>>> > > > > > > (XEN) IOAPIC[0]: apic_id 8, version
>>> 32,
>>> > address
>>> > > > 0xfec00000, GSI
>>> > > > > 0-23
>>> > > > > > > (XEN) IOAPIC[1]: apic_id 9, version
>>> 32,
>>> > address
>>> > > > 0xfec90000, GSI
>>> > > > > 24-47
>>> > > > > > > (XEN) Enabling APIC mode: Phys.
>>> Using 2
>>> > I/O
>>> > > APICs
>>> > > > > > > (XEN) Intel VT-d DMAR tables have
>>> been
>>> > parsed.
>>> > > > > > > (XEN) Using scheduler: SMP Credit
>>> > Scheduler
>>> > > (credit)
>>> > > > > > > (XEN) Detected 3200.207 MHz
>>> processor.
>>> > > > > > > (XEN) VMX: Supported advanced
>>> features:
>>> > > > > > > (XEN) - APIC MMIO access
>>> virtualisation
>>> > > > > > > (XEN) - APIC TPR shadow
>>> > > > > > > (XEN) - Extended Page Tables (EPT)
>>> > > > > > > (XEN) - Virtual-Processor
>>> Identifiers
>>> > (VPID)
>>> > > > > > > (XEN) - Virtual NMI
>>> > > > > > > (XEN) - MSR direct-access bitmap
>>> > > > > > > (XEN) VMX: EPT is available.
>>> > > > > > > (XEN) VMX: VPID is available.
>>> > > > > > > (XEN) HVM: VMX enabled
>>> > > > > > > (XEN) HVM: Hardware Assisted Paging
>>> > detected.
>>> > > > > > > (XEN) CPU0: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 1/2 eip
>>> 88000
>>> > > > > > > (XEN) CPU1: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 2/4 eip
>>> 88000
>>> > > > > > > (XEN) CPU2: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 3/16 eip
>>> 88000
>>> > > > > > > (XEN) CPU3: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 4/18 eip
>>> 88000
>>> > > > > > > (XEN) CPU4: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 5/20 eip
>>> 88000
>>> > > > > > > (XEN) CPU5: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 6/1 eip
>>> 88000
>>> > > > > > > (XEN) CPU6: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 7/3 eip
>>> 88000
>>> > > > > > > (XEN) CPU7: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 8/5 eip
>>> 88000
>>> > > > > > > (XEN) CPU8: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 9/17 eip
>>> 88000
>>> > > > > > > (XEN) CPU9: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 10/19 eip
>>> 88000
>>> > > > > > > (XEN) CPU10: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Booting processor 11/21 eip
>>> 88000
>>> > > > > > > (XEN) CPU11: Intel Genuine Intel(R)
>>> CPU
>>> > > 000
>>> > > > @
>>> > > > > 3.20GHz
>>> > > > > > stepping 00
>>> > > > > > > (XEN) Total of 12 processors
>>> activated.
>>> > > > > > > (XEN) ENABLING IO-APIC IRQs
>>> > > > > > > (XEN) -> Using new ACK method
>>> > > > > > > (XEN) checking TSC synchronization
>>> across
>>> > 12
>>> > > CPUs:
>>> > > > passed.
>>> > > > > > > (XEN) Platform timer is 14.318MHz
>>> HPET
>>> > > > > > > ?(XEN) Brought up 12 CPUs
>>> > > > > > > (XEN) Intel VT-d Snoop Control
>>> supported.
>>> > > > > > > (XEN) Intel VT-d DMA Passthrough
>>> not
>>> > supported.
>>> > > > > > > (XEN) Intel VT-d Queued
>>> Invalidation
>>> > supported.
>>> > > > > > > (XEN) Intel VT-d Interrupt
>>> Remapping
>>> > supported.
>>> > > > > > > (XEN) I/O virtualisation enabled
>>> > > > > > > (XEN) I/O virtualisation for PV
>>> guests
>>> > disabled
>>> > > > > > > (XEN) xenoprof: Initialization
>>> failed.
>>> > Intel
>>> > > processor
>>> > > > model 44
>>> > > > > for P6
>>> > > > > > class family is not supported
>>> > > > > > > (XEN) *** LOADING DOMAIN 0 ***
>>> > > > > > > (XEN) Xen kernel: 64-bit, lsb,
>>> compat32
>>> > > > > > > (XEN) Dom0 kernel: 64-bit, PAE,
>>> lsb,
>>> > paddr
>>> > > 0x1000000 ->
>>> > > > > 0x26bb000
>>> > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>> > > > > > > (XEN) Dom0 alloc.:
>>> > > 0000000064000000->0000000068000000
>>> > > > > (404490 pages
>>> > > > > > to be allocated)
>>> > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>> > > > > > > (XEN) Loaded kernel:
>>> > > ffffffff81000000->ffffffff826bb000
>>> > > > > > > (XEN) Init. ramdisk:
>>> > > ffffffff826bb000->ffffffff82d0d800
>>> > > > > > > (XEN) Phys-Mach map:
>>> > > ffffffff82d0e000->ffffffff83044050
>>> > > > > > > (XEN) Start info:
>>> > > ffffffff83045000->ffffffff830454b4
>>> > > > > > > (XEN) Page tables:
>>> > > ffffffff83046000->ffffffff83063000
>>> > > > > > > (XEN) Boot stack:
>>> > > ffffffff83063000->ffffffff83064000
>>> > > > > > > (XEN) TOTAL:
>>> > > ffffffff80000000->ffffffff83400000
>>> > > > > > > (XEN) ENTRY ADDRESS:
>>> ffffffff819c1200
>>> > > > > > > (XEN) Dom0 has maximum 12 VCPUs
>>> > > > > > > (XEN) Scrubbing Free RAM: .done.
>>> > > > > > > (XEN) Xen trace buffers: disabled
>>> > > > > > > (XEN) Std. Loglevel: Errors and
>>> warnings
>>> > > > > > > (XEN) Guest Loglevel: Nothing
>>> > (Rate-limited:
>>> > > Errors and
>>> > > > > warnings)
>>> > > > > > > (XEN) Xen is relinquishing VGA
>>> console.
>>> > > > > > > (XEN) *** Serial input -> DOM0
>>> (type
>>> > 'CTRL-a'
>>> > > three
>>> > > > times to
>>> > > > > switch
>>> > > > > > input to Xen)
>>> > > > > > > (XEN) Freed 128kB init memory.
>>> > > > > > > mapping kernel into physical memory
>>> > > > > > > Xen: setup ISA identity maps
>>> > > > > > > about to get started...
>>> > > > > > > Initializing cgroup subsys cpuset
>>> > > > > > > Initializing cgroup subsys cpu
>>> > > > > > > Linux version 2.6.32.9
>>> > > (kishore@xxxxxxxxxxxxxxxxxxxxx)
>>> > > > (gcc
>>> > > > > version
>>> > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1
>>> SMP
>>> > Mon Mar
>>> > > 15
>>> > > > 15:16:28 PDT
>>> > > > > 2010
>>> > > > > > > Command line: ro
>>> > root=/dev/VolGroup01/LogVol00
>>> > > > console=hvc0
>>> > > > > > earlyprintk=xen nomodeset
>>> > > > > > > KERNEL supported cpus:
>>> > > > > > > Intel GenuineIntel
>>> > > > > > > AMD AuthenticAMD
>>> > > > > > > Centaur CentaurHauls
>>> > > > > > > BIOS-provided physical RAM map:
>>> > > > > > > Xen: 0000000000000000 -
>>> 000000000009d000
>>> > > (usable)
>>> > > > > > > Xen: 000000000009d000 -
>>> 0000000000100000
>>> > > (reserved)
>>> > > > > > > Xen: 0000000000100000 -
>>> 0000000066c0a000
>>> > > (usable)
>>> > > > > > > Xen: 000000006d597000 -
>>> 000000006d686000
>>> > > (reserved)
>>> > > > > > > Xen: 000000006f598000 -
>>> 000000006f59a000
>>> > > (reserved)
>>> > > > > > > Xen: 000000006f59a000 -
>>> 000000006f5af000
>>> > (ACPI
>>> > > NVS)
>>> > > > > > > Xen: 000000006f5af000 -
>>> 000000006f5d9000
>>> > > (reserved)
>>> > > > > > > Xen: 000000006f5d9000 -
>>> 000000006f5f9000
>>> > (ACPI
>>> > > data)
>>> > > > > > > Xen: 000000006f5f9000 -
>>> 000000006f6df000
>>> > (ACPI
>>> > > NVS)
>>> > > > > > > Xen: 000000006f6df000 -
>>> 000000006f700000
>>> > (ACPI
>>> > > data)
>>> > > > > > > Xen: 000000006f700000 -
>>> 0000000080000000
>>> > > (reserved)
>>> > > > > > > Xen: 00000000a0000000 -
>>> 00000000b0000000
>>> > > (reserved)
>>> > > > > > > Xen: 00000000fc000000 -
>>> 00000000fd000000
>>> > > (reserved)
>>> > > > > > > Xen: 00000000fed1c000 -
>>> 00000000fed20000
>>> > > (reserved)
>>> > > > > > > Xen: 00000000ffc00000 -
>>> 0000000100000000
>>> > > (reserved)
>>> > > > > > > bootconsole [xenboot0] enabled
>>> > > > > > > DMI 2.4 present.
>>> > > > > > > last_pfn = 0x66c0a max_arch_pfn =
>>> > 0x400000000
>>> > > > > > > init_memory_mapping:
>>> > > 0000000000000000-0000000066c0a000
>>> > > > > > > RAMDISK: 026bb000 - 02d0d800
>>> > > > > > > ACPI: RSDP 00000000000f03f0 00024
>>> (v02
>>> > INTEL )
>>> > > > > > > ACPI: XSDT 000000006f6fe120 00064
>>> (v01
>>> > INTEL
>>> > > THRLY
>>> > > > 00000000
>>> > > > > > 01000013)
>>> > > > > > > ACPI: FACP 000000006f6fd000 000F4
>>> (v04
>>> > INTEL
>>> > > THRLY
>>> > > > 00000000
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > ACPI: DSDT 000000006f6f5000 074F1
>>> (v02
>>> > INTEL
>>> > > THRLY
>>> > > > 00000003
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > ACPI: FACS 000000006f5f9000 00040
>>> > > > > > > ACPI: APIC 000000006f6f4000 001CC
>>> (v02
>>> > INTEL
>>> > > THRLY
>>> > > > 00000000
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > ACPI: MCFG 000000006f6f3000 0003C
>>> (v01
>>> > INTEL
>>> > > THRLY
>>> > > > 00000001
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > ACPI: HPET 000000006f6f2000 00038
>>> (v01
>>> > INTEL
>>> > > THRLY
>>> > > > 00000001
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > ACPI: SLIT 000000006f6f1000 00030
>>> (v01
>>> > INTEL
>>> > > THRLY
>>> > > > 00000001
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > ACPI: WDDT 000000006f6f0000 00040
>>> (v01
>>> > INTEL
>>> > > THRLY
>>> > > > 00000000
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC
>>> (v01
>>> > INTEL
>>> > > SSDT PM
>>> > > > 00004000
>>> > > > > INTL
>>> > > > > > 20061109)
>>> > > > > > > ACPI: 000000006f6ee000 001D0
>>> (v01
>>> > INTEL
>>> > > THRLY
>>> > > > 00000001
>>> > > > > MSFT
>>> > > > > > 0100000D)
>>> > > > > > > No NUMA configuration found
>>> > > > > > > Faking a node at
>>> > > 0000000000000000-0000000066c0a000
>>> > > > > > > Bootmem setup node 0
>>> > > 0000000000000000-0000000066c0a000
>>> > > > > > > NODE_DATA [0000000000008000 -
>>> > 000000000001ffff]
>>> > > > > > > bootmap [0000000000020000 -
>>> > 000000000002cd87]
>>> > > pages d
>>> > > > > > > (9 early reservations) ==> bootmem
>>> > [0000000000 -
>>> > > > 0066c0a000]
>>> > > > > > > #0 [0000000000 - 0000001000]
>>> BIOS data
>>> > page
>>> > > ==>
>>> > > > [0000000000
>>> > > > > -
>>> > > > > > 0000001000]
>>> > > > > > > #1 [0003046000 - 0003063000]
>>> XEN
>>> > PAGETABLES
>>> > > ==>
>>> > > > [0003046000
>>> > > > > -
>>> > > > > > 0003063000]
>>> > > > > > > #2 [0000006000 - 0000008000]
>>> > TRAMPOLINE
>>> > > ==>
>>> > > > [0000006000
>>> > > > > -
>>> > > > > > 0000008000]
>>> > > > > > > #3 [0001000000 - 000269ae98]
>>> TEXT
>>> > DATA BSS
>>> > > ==>
>>> > > > [0001000000
>>> > > > > -
>>> > > > > > 000269ae98]
>>> > > > > > > #4 [00026bb000 - 0002d0d800]
>>> > RAMDISK
>>> > > ==>
>>> > > > [00026bb000
>>> > > > > -
>>> > > > > > 0002d0d800]
>>> > > > > > > #5 [0002d0e000 - 0003046000]
>>> XEN START
>>> > INFO
>>> > > ==>
>>> > > > [0002d0e000
>>> > > > > -
>>> > > > > > 0003046000]
>>> > > > > > > #6 [000269b000 - 000269b011]
>>> > BRK
>>> > > ==>
>>> > > > [000269b000
>>> > > > > -
>>> > > > > > 000269b011]
>>> > > > > > > #7 [0000100000 - 000041a000]
>>> > PGTABLE
>>> > > ==>
>>> > > > [0000100000
>>> > > > > -
>>> > > > > > 000041a000]
>>> > > > > > > #8 [0000001000 - 0000001030]
>>> ACPI
>>> > SLIT
>>> > > ==>
>>> > > > [0000001000
>>> > > > > -
>>> > > > > > 0000001030]
>>> > > > > > > found SMP MP-table at
>>> [ffff8800000fd750]
>>> > fd750
>>> > > > > > > Zone PFN ranges:
>>> > > > > > > DMA 0x00000000 -> 0x00001000
>>> > > > > > > DMA32 0x00001000 -> 0x00100000
>>> > > > > > > Normal 0x00100000 -> 0x00100000
>>> > > > > > > Movable zone start PFN for each
>>> node
>>> > > > > > > early_node_map[2] active PFN ranges
>>> > > > > > > 0: 0x00000000 -> 0x0000009d
>>> > > > > > > 0: 0x00000100 -> 0x00066c0a
>>> > > > > > > ACPI: PM-Timer IO Port: 0x408
>>> > > > > > > ACPI: LAPIC (acpi_id[0x00]
>>> lapic_id[0x00]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x01]
>>> lapic_id[0x02]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x02]
>>> lapic_id[0x04]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x03]
>>> lapic_id[0x10]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x04]
>>> lapic_id[0x12]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x05]
>>> lapic_id[0x14]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x06]
>>> lapic_id[0x01]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x07]
>>> lapic_id[0x03]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x08]
>>> lapic_id[0x05]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x09]
>>> lapic_id[0x11]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x0a]
>>> lapic_id[0x13]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x0b]
>>> lapic_id[0x15]
>>> > > enabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x0c]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x0d]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x0e]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x0f]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x10]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x11]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x12]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x13]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x14]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x15]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x16]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC (acpi_id[0x17]
>>> lapic_id[0xff]
>>> > > disabled)
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high
>>> level
>>> > > lint[0x1])
>>> > > > > > > ACPI: IOAPIC (id[0x08]
>>> address[0xfec00000]
>>> > > gsi_base[0])
>>> > > > > > > IOAPIC[0]: apic_id 8, version 0,
>>> address
>>> > > 0xfec00000, GSI
>>> > > > 0-0
>>> > > > > > > ACPI: IOAPIC (id[0x09]
>>> address[0xfec90000]
>>> > > gsi_base[24])
>>> > > > > > > IOAPIC[1]: apic_id 9, version 0,
>>> address
>>> > > 0xfec90000, GSI
>>> > > > 24-24
>>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0
>>> > global_irq 2
>>> > > dfl dfl)
>>> > > > > > > ERROR: Unable to locate IOAPIC for
>>> GSI 2
>>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9
>>> > global_irq 9
>>> > > high
>>> > > > level)
>>> > > > > > > ERROR: Unable to locate IOAPIC for
>>> GSI 9
>>> > > > > > > Using ACPI (MADT) for SMP
>>> configuration
>>> > > information
>>> > > > > > > ACPI: HPET id: 0x8086a401 base:
>>> 0xfed00000
>>> > > > > > > SMP: Allowing 12 CPUs, 0 hotplug
>>> CPUs
>>> > > > > > > PM: Registered nosave memory:
>>> > 000000000009d000 -
>>> > > > > 0000000000100000
>>> > > > > > > Allocating PCI resources starting
>>> at
>>> > b0000000
>>> > > (gap:
>>> > > > > b0000000:4c000000)
>>> > > > > > > Booting paravirtualized kernel on
>>> Xen
>>> > > > > > > Xen version: 3.4.3-rc4-pre
>>> (preserve-AD)
>>> > (dom0)
>>> > > > > > > NR_CPUS:512 nr_cpumask_bits:512
>>> > nr_cpu_ids:12
>>> > > > nr_node_ids:1
>>> > > > > > > PERCPU: Embedded 478 pages/cpu
>>> > @ffff880005ebc000
>>> > > > s1928024 r8192
>>> > > > > d21672
>>> > > > > > u1957888
>>> > > > > > > pcpu-alloc: s1928024 r8192 d21672
>>> u1957888
>>> > > > alloc=478*4096
>>> > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02
>>> [0] 03
>>> > [0] 04
>>> > > [0] 05
>>> > > > [0] 06
>>> > > > > [0] 07
>>> > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10
>>> [0] 11
>>> > > > > > > Xen: using vcpu_info placement
>>> > > > > > > Built 1 zonelists in Node order,
>>> mobility
>>> > > grouping on.
>>> > > > Total
>>> > > > > pages:
>>> > > > > > 409291
>>> > > > > > > Policy zone: DMA32
>>> > > > > > > Kernel command line: ro
>>> > > root=/dev/VolGroup01/LogVol00
>>> > > > > console=hvc0
>>> > > > > > earlyprintk=xen nomodeset
>>> > > > > > > PID hash table entries: 4096
>>> (order: 3,
>>> > 32768
>>> > > bytes)
>>> > > > > > > Initializing CPU#0
>>> > > > > > > DMA: Placing 64MB software IO TLB
>>> between
>>> > > > ffff880007525000 -
>>> > > > > > ffff88000b525000
>>> > > > > > > DMA: software IO TLB at phys
>>> 0x7525000 -
>>> > > 0xb525000
>>> > > > > > > xen_swiotlb_fixup:
>>> buf=ffff880007525000
>>> > > size=67108864
>>> > > > > > > xen_swiotlb_fixup:
>>> buf=ffff88000b585000
>>> > > size=32768
>>> > > > > > > Memory: 1514268k/1683496k available
>>> (4654k
>>> > kernel
>>> > > code,
>>> > > > 396k
>>> > > > > absent,
>>> > > > > > 168832k reserved, 3443k data, 3396k
>>> init)
>>> > > > > > > SLUB: Genslabs=14, HWalign=64,
>>> Order=0-3,
>>> > > MinObjects=0,
>>> > > > > CPUs=12,
>>> > > > > > Nodes=1
>>> > > > > > > Hierarchical RCU implementation.
>>> > > > > > > NR_IRQS:4352 nr_irqs:3072
>>> > > > > > > Already setup the GSI :0
>>> > > > > > > Already setup the GSI :1
>>> > > > > > > Already setup the GSI :2
>>> > > > > > > Already setup the GSI :3
>>> > > > > > > Already setup the GSI :4
>>> > > > > > > Already setup the GSI :5
>>> > > > > > > Already setup the GSI :6
>>> > > > > > > Already setup the GSI :7
>>> > > > > > > Already setup the GSI :8
>>> > > > > > > Already setup the GSI :9
>>> > > > > > > Already setup the GSI :10
>>> > > > > > > Already setup the GSI :11
>>> > > > > > > Already setup the GSI :12
>>> > > > > > > Already setup the GSI :13
>>> > > > > > > Already setup the GSI :14
>>> > > > > > > Already setup the GSI :15
>>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0
>>> > global_irq 2
>>> > > dfl dfl)
>>> > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9
>>> > global_irq 9
>>> > > high
>>> > > > level)
>>> > > > > > > xen: sci override: source_irq=9
>>> > global_irq=9
>>> > > trigger=c
>>> > > > > polarity=1
>>> > > > > > > xen_allocate_pirq: returning irq 9
>>> for gsi
>>> > 9
>>> > > > > > > Already setup the GSI :9
>>> > > > > > > xen: acpi sci 9
>>> > > > > > > Console: colour VGA+ 80x25
>>> > > > > > > console [hvc0] enabled, bootconsole
>>> > disabled
>>> > > console
>>> > > > [hvc0]
>>> > > > > enabled,
>>> > > > > > bootconsole disabled
>>> > > > > > > Lock dependency validator:
>>> Copyright (c)
>>> > 2006 Red
>>> > > Hat,
>>> > > > Inc.,
>>> > > > > Ingo
>>> > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8
>>> ...
>>> > > MAX_LOCK_DEPTH:
>>> > > > > 48
>>> > > > > > ... MAX_LOCKDEP_KEYS: 8191 ...
>>> > > CLASSHASH_SIZE:
>>> > > > > 4096 ...
>>> > > > > > MAX_LOCKDEP_ENTRIES: 16384 ...
>>> > > MAX_LOCKDEP_CHAINS:
>>> > > > 32768
>>> > > > > ...
>>> > > > > > CHAINHASH_SIZE: 16384
>>> memory used
>>> > by lock
>>> > > > dependency
>>> > > > > info:
>>> > > > > > 6367 kB per task-struct memory
>>> footprint:
>>> > 2688
>>> > > bytes
>>> > > > allocated
>>> > > > > 17039360
>>> > > > > > bytes of page_cgroup please try
>>> > > 'cgroup_disable=memory'
>>> > > > option if
>>> > > > > you
>>> > > > > > don't want memory cgroups installing
>>> Xen
>>> > timer for
>>> > > CPU 0
>>> > > > Detected
>>> > > > > > 3200.206 MHz processor. Calibrating
>>> delay
>>> > loop
>>> > > (skipped),
>>> > > > value
>>> > > > > > calculated using timer frequency..
>>> 6400.41
>>> > BogoMIPS
>>> > > > (lpj=3200206)
>>> > > > > > Security Framework initialized
>>> SELinux:
>>> > > Initializing.
>>> > > > Dentry
>>> > > > > cache hash
>>> > > > > > table entries: 262144 (order: 9,
>>> 2097152
>>> > bytes)
>>> > > > Inode-cache hash
>>> > > > > table
>>> > > > > > entries: 131072 (order: 8, 1048576
>>> bytes)
>>> > > Mount-cache hash
>>> > > > table
>>> > > > > > entries: 256 Initializing cgroup
>>> subsys ns
>>> > > Initializing
>>> > > > cgroup
>>> > > > > subsys
>>> > > > > > cpuacct Initializing cgroup subsys
>>> memory
>>> > > Initializing
>>> > > > cgroup
>>> > > > > subsys
>>> > > > > > devices Initializing cgroup subsys
>>> freezer
>>> > > Initializing
>>> > > > cgroup
>>> > > > > subsys
>>> > > > > > net_cls CPU: L1 I cache: 32K, L1 D
>>> cache:
>>> > 32K CPU:
>>> > > L2
>>> > > > cache: 256K
>>> > > > > CPU:
>>> > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0
>>> CPU:
>>> > > Unsupported
>>> > > > number of
>>> > > > > siblings
>>> > > > > > 32 Performance Events: unsupported p6
>>> CPU
>>> > model 44
>>> > > no PMU
>>> > > > driver,
>>> > > > > > software events only. lockdep: fixing
>>> up
>>> > > alternatives. SMP
>>> > > > > alternatives:
>>> > > > > > switching to UP code ACPI: Core
>>> revision
>>> > 20090903
>>> > > ftrace:
>>> > > > > converting
>>> > > > > > mcount calls to 0f 1f 44 00 00
>>> ftrace:
>>> > allocating
>>> > > 27971
>>> > > > entries
>>> > > > > in 110
>>> > > > > > pages installing Xen timer for CPU 1
>>> > lockdep:
>>> > > fixing up
>>> > > > > alternatives.
>>> > > > > > SMP alternatives: switching to SMP
>>> code
>>> > > Initializing CPU#1
>>> > > > CPU:
>>> > > > > L1 I
>>> > > > > > cache: 32K, L1 D cache: 32K CPU: L2
>>> cache:
>>> > 256K
>>> > > CPU: L3
>>> > > > cache:
>>> > > > > 12288K
>>> > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported
>>> number
>>> > of
>>> > > siblings 32
>>> > > > > installing
>>> > > > > > Xen timer for CPU 2 Initializing
>>> CPU#2 CPU:
>>> > L1 I
>>> > > cache:
>>> > > > 32K, L1 D
>>> > > > > cache:
>>> > > > > > 32K CPU: L2 cache: 256K CPU: L3
>>> cache:
>>> > 12288K CPU
>>> > > 2/0x0 ->
>>> > > > Node 0
>>> > > > > CPU:
>>> > > > > > Unsupported number of siblings 32
>>> installing
>>> > Xen
>>> > > timer for
>>> > > > CPU 3
>>> > > > > > Initializing CPU#3 CPU: L1 I cache:
>>> 32K, L1
>>> > D
>>> > > cache: 32K
>>> > > > CPU: L2
>>> > > > > cache:
>>> > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0
>>> -> Node
>>> > 0 CPU:
>>> > > > Unsupported
>>> > > > > number
>>> > > > > > of siblings 32 installing Xen timer
>>> for CPU
>>> > 4
>>> > > Initializing
>>> > > > CPU#4
>>> > > > > CPU: L1
>>> > > > > > I cache: 32K, L1 D cache: 32K CPU: L2
>>> cache:
>>> > 256K
>>> > > CPU: L3
>>> > > > cache:
>>> > > > > 12288K
>>> > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported
>>> number
>>> > of
>>> > > siblings 32
>>> > > > > installing
>>> > > > > > Xen timer for CPU 5 Initializing
>>> CPU#5 CPU:
>>> > L1 I
>>> > > cache:
>>> > > > 32K, L1 D
>>> > > > > cache:
>>> > > > > > 32K CPU: L2 cache: 256K CPU: L3
>>> cache:
>>> > 12288K CPU
>>> > > 5/0x0 ->
>>> > > > Node 0
>>> > > > > CPU:
>>> > > > > > Unsupported number of siblings 32
>>> installing
>>> > Xen
>>> > > timer for
>>> > > > CPU 6
>>> > > > > > Initializing CPU#6 CPU: L1 I cache:
>>> 32K, L1
>>> > D
>>> > > cache: 32K
>>> > > > CPU: L2
>>> > > > > cache:
>>> > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0
>>> -> Node
>>> > 0 CPU:
>>> > > > Unsupported
>>> > > > > number
>>> > > > > > of siblings 32 installing Xen timer
>>> for CPU
>>> > 7
>>> > > Initializing
>>> > > > CPU#7
>>> > > > > CPU: L1
>>> > > > > > I cache: 32K, L1 D cache: 32K CPU: L2
>>> cache:
>>> > 256K
>>> > > CPU: L3
>>> > > > cache:
>>> > > > > 12288K
>>> > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported
>>> number
>>> > of
>>> > > siblings 32
>>> > > > > installing
>>> > > > > > Xen timer for CPU 8 Initializing
>>> CPU#8 CPU:
>>> > L1 I
>>> > > cache:
>>> > > > 32K, L1 D
>>> > > > > cache:
>>> > > > > > 32K CPU: L2 cache: 256K CPU: L3
>>> cache:
>>> > 12288K CPU
>>> > > 8/0x0 ->
>>> > > > Node 0
>>> > > > > CPU:
>>> > > > > > Unsupported number of siblings 32
>>> installing
>>> > Xen
>>> > > timer for
>>> > > > CPU 9
>>> > > > > > Initializing CPU#9 CPU: L1 I cache:
>>> 32K, L1
>>> > D
>>> > > cache: 32K
>>> > > > CPU: L2
>>> > > > > cache:
>>> > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0
>>> -> Node
>>> > 0 CPU:
>>> > > > Unsupported
>>> > > > > number
>>> > > > > > of siblings 32 installing Xen timer
>>> for CPU
>>> > 10
>>> > > > Initializing
>>> > > > > CPU#10 CPU:
>>> > > > > > L1 I cache: 32K, L1 D cache: 32K CPU:
>>> L2
>>> > cache:
>>> > > 256K CPU:
>>> > > > L3
>>> > > > > cache:
>>> > > > > > 12288K CPU 10/0x0 -> Node 0 CPU:
>>> Unsupported
>>> > number
>>> > > of
>>> > > > siblings
>>> > > > > 32
>>> > > > > > installing Xen timer for CPU 11
>>> Initializing
>>> > CPU#11
>>> > > CPU:
>>> > > > L1 I
>>> > > > > cache:
>>> > > > > > 32K, L1 D cache: 32K CPU: L2 cache:
>>> 256K
>>> > CPU: L3
>>> > > cache:
>>> > > > 12288K
>>> > > > > CPU
>>> > > > > > 11/0x0 -> Node 0 CPU: Unsupported
>>> number of
>>> > > siblings 32
>>> > > > Brought
>>> > > > > up 12
>>> > > > > > CPUs Grant table initialized
>>> regulator: core
>>> > > version 0.5
>>> > > > Time:
>>> > > > > 14:45:00
>>> > > > > > Date: 03/16/10 NET: Registered
>>> protocol
>>> > family 16
>>> > > > > xenbus_probe_init ok
>>> > > > > > ACPI FADT declares the system doesn't
>>> > support PCIe
>>> > > ASPM,
>>> > > > so
>>> > > > > disable it
>>> > > > > > ACPI: bus type pci registered PCI:
>>> MCFG
>>> > > configuration 0:
>>> > > > base
>>> > > > > a0000000
>>> > > > > > segment 0 buses 0 - 255 PCI: MCFG
>>> area at
>>> > a0000000
>>> > > > reserved in
>>> > > > > E820 PCI:
>>> > > > > > Using MMCONFIG at a0000000 - afffffff
>>> PCI:
>>> > Using
>>> > > > configuration
>>> > > > > type 1
>>> > > > > > for base access bio: create slab
>>> <bio-0> at
>>> > 0 ACPI
>>> > > Error:
>>> > > > Field
>>> > > > > [CPB3]
>>> > > > > > at 96 exceeds Buffer [NULL] size 64
>>> (bits)
>>> > > > > (20090903/dsopcode-596) ACPI
>>> > > > > > Error (psparse-0537): Method
>>> parse/execution
>>> > failed
>>> > > > [\_SB_._OSC]
>>> > > > > (Node
>>> > > > > > ffff880064e00c98),
>>> AE_AML_BUFFER_LIMIT ACPI:
>>> > > Interpreter
>>> > > > enabled
>>> > > > > ACPI:
>>> > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using
>>> IOAPIC
>>> > for
>>> > > interrupt
>>> > > > > routing ACPI
>>> > > > > > Warning: Incorrect checksum in table
>>> [ ]
>>> > - 97,
>>> > > should
>>> > > > be DB
>>> > > > > > (20090903/tbutils-314) ACPI: No dock
>>> devices
>>> > found.
>>> > > ACPI:
>>> > > > PCI
>>> > > > > Root
>>> > > > > > Bridge [PCI0] (0000:00) pci
>>> 0000:00:01.0:
>>> > PME#
>>> > > supported
>>> > > > from D0
>>> > > > > D3hot
>>> > > > > > D3cold pci 0000:00:01.0: PME#
>>> disabled pci
>>> > > 0000:00:02.0:
>>> > > > PME#
>>> > > > > supported
>>> > > > > > from D0 D3hot D3cold pci
>>> 0000:00:02.0: PME#
>>> > > disabled pci
>>> > > > > 0000:00:03.0:
>>> > > > > > PME# supported from D0 D3hot D3cold
>>> pci
>>> > > 0000:00:03.0: PME#
>>> > > > > disabled pci
>>> > > > > > 0000:00:04.0: PME# supported from D0
>>> D3hot
>>> > D3cold
>>> > > pci
>>> > > > > 0000:00:04.0: PME#
>>> > > > > > disabled pci 0000:00:05.0: PME#
>>> supported
>>> > from D0
>>> > > D3hot
>>> > > > D3cold
>>> > > > > pci
>>> > > > > > 0000:00:05.0: PME# disabled pci
>>> > 0000:00:06.0: PME#
>>> > > > supported from
>>> > > > > D0
>>> > > > > > D3hot D3cold pci 0000:00:06.0: PME#
>>> disabled
>>> > pci
>>> > > > 0000:00:07.0:
>>> > > > > PME#
>>> > > > > > supported from D0 D3hot D3cold pci
>>> > 0000:00:07.0:
>>> > > PME#
>>> > > > disabled
>>> > > > > pci
>>> > > > > > 0000:00:08.0: PME# supported from D0
>>> D3hot
>>> > D3cold
>>> > > pci
>>> > > > > 0000:00:08.0: PME#
>>> > > > > > disabled pci 0000:00:09.0: PME#
>>> supported
>>> > from D0
>>> > > D3hot
>>> > > > D3cold
>>> > > > > pci
>>> > > > > > 0000:00:09.0: PME# disabled pci
>>> > 0000:00:0a.0: PME#
>>> > > > supported from
>>> > > > > D0
>>> > > > > > D3hot D3cold pci 0000:00:0a.0: PME#
>>> disabled
>>> > pci
>>> > > > 0000:00:13.0:
>>> > > > > PME#
>>> > > > > > supported from D0 D3hot D3cold pci
>>> > 0000:00:13.0:
>>> > > PME#
>>> > > > disabled
>>> > > > > pci
>>> > > > > > 0000:00:1a.7: PME# supported from D0
>>> D3hot
>>> > D3cold
>>> > > pci
>>> > > > > 0000:00:1a.7: PME#
>>> > > > > > disabled pci 0000:00:1c.0: PME#
>>> supported
>>> > from D0
>>> > > D3hot
>>> > > > D3cold
>>> > > > > pci
>>> > > > > > 0000:00:1c.0: PME# disabled pci
>>> > 0000:00:1c.4: PME#
>>> > > > supported from
>>> > > > > D0
>>> > > > > > D3hot D3cold pci 0000:00:1c.4: PME#
>>> disabled
>>> > pci
>>> > > > 0000:00:1c.5:
>>> > > > > PME#
>>> > > > > > supported from D0 D3hot D3cold pci
>>> > 0000:00:1c.5:
>>> > > PME#
>>> > > > disabled
>>> > > > > pci
>>> > > > > > 0000:00:1d.7: PME# supported from D0
>>> D3hot
>>> > D3cold
>>> > > pci
>>> > > > > 0000:00:1d.7: PME#
>>> > > > > > disabled pci 0000:00:1f.0: quirk:
>>> region
>>> > 0400-047f
>>> > > claimed
>>> > > > by
>>> > > > > ICH6
>>> > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0:
>>> quirk:
>>> > region
>>> > > 0500-053f
>>> > > > claimed
>>> > > > > by ICH6
>>> > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC
>>> Generic IO
>>> > decode 1
>>> > > PIO at
>>> > > > 0680
>>> > > > > (mask
>>> > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC
>>> Generic IO
>>> > decode
>>> > > 2 PIO
>>> > > > at 0ca0
>>> > > > > (mask
>>> > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC
>>> Generic IO
>>> > decode
>>> > > 3 PIO
>>> > > > at 0600
>>> > > > > (mask
>>> > > > > > 001f) pci 0000:00:1f.2: PME#
>>> supported from
>>> > D3hot
>>> > > pci
>>> > > > > 0000:00:1f.2: PME#
>>> > > > > > disabled pci 0000:01:00.0: PME#
>>> supported
>>> > from D0
>>> > > D3hot
>>> > > > D3cold
>>> > > > > pci
>>> > > > > > 0000:01:00.0: PME# disabled pci
>>> > 0000:01:00.1: PME#
>>> > > > supported from
>>> > > > > D0
>>> > > > > > D3hot D3cold pci 0000:01:00.1: PME#
>>> disabled
>>> > pci
>>> > > > 0000:0c:00.0:
>>> > > > > disabling
>>> > > > > > ASPM on pre-1.1 PCIe device. You can
>>> enable
>>> > it
>>> > > with
>>> > > > > 'pcie_aspm=force'
>>> > > > > > pci 0000:00:1e.0: transparent bridge
>>> ACPI:
>>> > PCI Root
>>> > > Bridge
>>> > > > [PCI1]
>>> > > > > > (0000:fe) ACPI: PCI Root Bridge
>>> [PCI2]
>>> > (0000:ff)
>>> > > ACPI: PCI
>>> > > > > Interrupt
>>> > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11
>>> 12 14
>>> > 15)
>>> > > ACPI: PCI
>>> > > > > Interrupt Link
>>> > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14
>>> 15)
>>> > ACPI: PCI
>>> > > > Interrupt
>>> > > > > Link
>>> > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14
>>> 15)
>>> > ACPI: PCI
>>> > > > Interrupt
>>> > > > > Link
>>> > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14
>>> 15)
>>> > ACPI: PCI
>>> > > > Interrupt
>>> > > > > Link
>>> > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
>>> 15) *0,
>>> > > disabled.
>>> > > > ACPI: PCI
>>> > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7
>>> 9 10
>>> > *11 12
>>> > > 14 15)
>>> > > > ACPI:
>>> > > > > PCI
>>> > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7
>>> 9 10
>>> > 11 12 14
>>> > > 15)
>>> > > > *0,
>>> > > > > disabled.
>>> > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs
>>> 3 4 5
>>> > 6 7 9
>>> > > *10 11
>>> > > > 12 14
>>> > > > > 15)
>>> > > > > > xenbus_probe_backend_init bus
>>> registered ok
>>> > > > > xenbus_probe_frontend_init
>>> > > > > > bus registered ok xen_balloon:
>>> Initialising
>>> > balloon
>>> > > driver
>>> > > > with
>>> > > > > page
>>> > > > > > order 0. vgaarb: device added:
>>> > > > > >
>>> > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
>>> > > > vgaarb:
>>> > > > > loaded
>>> > > > > > SCSI subsystem initialized usbcore:
>>> > registered new
>>> > > > interface
>>> > > > > driver
>>> > > > > > usbfs usbcore: registered new
>>> interface
>>> > driver hub
>>> > > > usbcore:
>>> > > > > registered
>>> > > > > > new device driver usb PCI: Using ACPI
>>> for
>>> > IRQ
>>> > > routing
>>> > > > NetLabel:
>>> > > > > > Initializing NetLabel: domain hash
>>> size =
>>> > 128
>>> > > NetLabel:
>>> > > > > protocols =
>>> > > > > > UNLABELED CIPSOv4 NetLabel:
>>> unlabeled
>>> > traffic
>>> > > allowed by
>>> > > > default
>>> > > > > > Switching to clocksource xen kstop/0
>>> used
>>> > greatest
>>> > > stack
>>> > > > depth:
>>> > > > > 6568
>>> > > > > > bytes left kstop/1 used greatest
>>> stack
>>> > depth: 6536
>>> > > bytes
>>> > > > left
>>> > > > > pnp: PnP
>>> > > > > > ACPI init ACPI: bus type pnp
>>> registered
>>> > > xen_allocate_pirq:
>>> > > > > returning irq
>>> > > > > > 8 for gsi 8 Already setup the GSI :8
>>> > > xen_allocate_pirq:
>>> > > > returning
>>> > > > > irq 13
>>> > > > > > for gsi 13 Already setup the GSI :13
>>> pnp:
>>> > PnP ACPI:
>>> > > found
>>> > > > 13
>>> > > > > devices
>>> > > > > > ACPI: ACPI bus type pnp unregistered
>>> system
>>> > 00:07:
>>> > > ioport
>>> > > > range
>>> > > > > > 0x500-0x53f has been reserved system
>>> 00:07:
>>> > ioport
>>> > > range
>>> > > > > 0x400-0x47f has
>>> > > > > > been reserved system 00:07: ioport
>>> range
>>> > > 0x800-0x81f has
>>> > > > been
>>> > > > > reserved
>>> > > > > > system 00:07: ioport range
>>> 0x2f8-0x2ff has
>>> > been
>>> > > reserved
>>> > > > system
>>> > > > > 00:07:
>>> > > > > > iomem range 0xfed1c000-0xfed8bffe
>>> could not
>>> > be
>>> > > reserved
>>> > > > system
>>> > > > > 00:07:
>>> > > > > > iomem range 0xff000000-0xffffffff
>>> could not
>>> > be
>>> > > reserved
>>> > > > system
>>> > > > > 00:07:
>>> > > > > > iomem range 0xfee00000-0xfeefffff has
>>> been
>>> > reserved
>>> > > system
>>> > > > 00:07:
>>> > > > > iomem
>>> > > > > > range 0xfe900000-0xfe90001f has been
>>> > reserved
>>> > > system
>>> > > > 00:07: iomem
>>> > > > > range
>>> > > > > > 0xfea00000-0xfea0001f has been
>>> reserved
>>> > system
>>> > > 00:07:
>>> > > > iomem range
>>> > > > > > 0xfed1b000-0xfed1bfff has been
>>> reserved pci
>>> > > 0000:0c:00.0:
>>> > > > BAR 6:
>>> > > > > no
>>> > > > > > parent found for of device
>>> > [0xffff0000-0xffffffff]
>>> > > pci
>>> > > > > 0000:00:01.0: PCI
>>> > > > > > bridge, secondary bus 0000:01 pci
>>> > 0000:00:01.0:
>>> > > IO
>>> > > > window:
>>> > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM
>>> > window:
>>> > > > > 0xb1900000-0xb19fffff pci
>>> > > > > > 0000:00:01.0: PREFETCH window:
>>> disabled
>>> > pci
>>> > > > 0000:00:02.0: PCI
>>> > > > > bridge,
>>> > > > > > secondary bus 0000:02 pci
>>> 0000:00:02.0: IO
>>> > > window:
>>> > > > disabled pci
>>> > > > > > 0000:00:02.0: MEM window: disabled
>>> pci
>>> > > 0000:00:02.0:
>>> > > > PREFETCH
>>> > > > > > window: disabled pci 0000:00:03.0:
>>> PCI
>>> > bridge,
>>> > > secondary
>>> > > > bus
>>> > > > > 0000:03 pci
>>> > > > > > 0000:00:03.0: IO window: disabled
>>> pci
>>> > > 0000:00:03.0:
>>> > > > MEM
>>> > > > > window:
>>> > > > > > disabled pci 0000:00:03.0: PREFETCH
>>> > window:
>>> > > disabled pci
>>> > > > > 0000:00:04.0:
>>> > > > > > PCI bridge, secondary bus 0000:04 pci
>>> > 0000:00:04.0:
>>> > > IO
>>> > > > window:
>>> > > > > > disabled pci 0000:00:04.0: MEM
>>> window:
>>> > disabled
>>> > > pci
>>> > > > > 0000:00:04.0:
>>> > > > > > PREFETCH window: disabled pci
>>> 0000:00:05.0:
>>> > PCI
>>> > > bridge,
>>> > > > secondary
>>> > > > > bus
>>> > > > > > 0000:05 pci 0000:00:05.0: IO
>>> window:
>>> > disabled pci
>>> > > > 0000:00:05.0:
>>> > > > > MEM
>>> > > > > > window: disabled pci 0000:00:05.0:
>>> > PREFETCH
>>> > > window:
>>> > > > disabled
>>> > > > > pci
>>> > > > > > 0000:00:06.0: PCI bridge, secondary
>>> bus
>>> > 0000:06 pci
>>> > > > 0000:00:06.0:
>>> > > > > IO
>>> > > > > > window: disabled pci 0000:00:06.0:
>>> MEM
>>> > window:
>>> > > disabled
>>> > > > pci
>>> > > > > > 0000:00:06.0: PREFETCH window:
>>> disabled
>>> > pci
>>> > > > 0000:00:07.0: PCI
>>> > > > > bridge,
>>> > > > > > secondary bus 0000:07 pci
>>> 0000:00:07.0: IO
>>> > > window:
>>> > > > disabled pci
>>> > > > > > 0000:00:07.0: MEM window: disabled
>>> pci
>>> > > 0000:00:07.0:
>>> > > > PREFETCH
>>> > > > > > window: disabled pci 0000:00:08.0:
>>> PCI
>>> > bridge,
>>> > > secondary
>>> > > > bus
>>> > > > > 0000:08 pci
>>> > > > > > 0000:00:08.0: IO window: disabled
>>> pci
>>> > > 0000:00:08.0:
>>> > > > MEM
>>> > > > > window:
>>> > > > > > disabled pci 0000:00:08.0: PREFETCH
>>> > window:
>>> > > disabled pci
>>> > > > > 0000:00:09.0:
>>> > > > > > PCI bridge, secondary bus 0000:09 pci
>>> > 0000:00:09.0:
>>> > > IO
>>> > > > window:
>>> > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM
>>> > window:
>>> > > > > 0xb1b00000-0xb1cfffff pci
>>> > > > > > 0000:00:09.0: PREFETCH window:
>>> > > > > 0x000000b1d00000-0x000000b1efffff pci
>>> > > > > > 0000:00:0a.0: PCI bridge, secondary
>>> bus
>>> > 0000:0a pci
>>> > > > 0000:00:0a.0:
>>> > > > > IO
>>> > > > > > window: disabled pci 0000:00:0a.0:
>>> MEM
>>> > window:
>>> > > disabled
>>> > > > pci
>>> > > > > > 0000:00:0a.0: PREFETCH window:
>>> disabled
>>> > pci
>>> > > > 0000:00:1c.0: PCI
>>> > > > > bridge,
>>> > > > > > secondary bus 0000:0b pci
>>> 0000:00:1c.0: IO
>>> > > window:
>>> > > > disabled pci
>>> > > > > > 0000:00:1c.0: MEM window: disabled
>>> pci
>>> > > 0000:00:1c.0:
>>> > > > PREFETCH
>>> > > > > > window: disabled pci 0000:00:1c.4:
>>> PCI
>>> > bridge,
>>> > > secondary
>>> > > > bus
>>> > > > > 0000:0c pci
>>> > > > > > 0000:00:1c.4: IO window: disabled
>>> pci
>>> > > 0000:00:1c.4:
>>> > > > MEM
>>> > > > > window:
>>> > > > > > 0xb1000000-0xb18fffff pci
>>> 0000:00:1c.4:
>>> > PREFETCH
>>> > > window:
>>> > > > > > 0x000000b0000000-0x000000b0ffffff pci
>>> > 0000:00:1c.5:
>>> > > PCI
>>> > > > bridge,
>>> > > > > > secondary bus 0000:0d pci
>>> 0000:00:1c.5: IO
>>> > > window:
>>> > > > disabled pci
>>> > > > > > 0000:00:1c.5: MEM window: disabled
>>> pci
>>> > > 0000:00:1c.5:
>>> > > > PREFETCH
>>> > > > > > window: disabled pci 0000:00:1e.0:
>>> PCI
>>> > bridge,
>>> > > secondary
>>> > > > bus
>>> > > > > 0000:0e pci
>>> > > > > > 0000:00:1e.0: IO window: disabled
>>> pci
>>> > > 0000:00:1e.0:
>>> > > > MEM
>>> > > > > window:
>>> > > > > > disabled pci 0000:00:1e.0: PREFETCH
>>> > window:
>>> > > disabled pci
>>> > > > > 0000:00:01.0:
>>> > > > > > PCI INT A -> GSI 28 (level, low) ->
>>> IRQ 28
>>> > pci
>>> > > > 0000:00:02.0: PCI
>>> > > > > INT A
>>> > > > > > -> GSI 29 (level, low) -> IRQ 29 pci
>>> > 0000:00:03.0:
>>> > > PCI INT
>>> > > > A ->
>>> > > > > GSI 24
>>> > > > > > (level, low) -> IRQ 24 pci
>>> 0000:00:04.0: PCI
>>> > INT A
>>> > > -> GSI
>>> > > > 25
>>> > > > > (level,
>>> > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI
>>> INT A
>>> > -> GSI
>>> > > 26
>>> > > > (level, low)
>>> > > > > -> IRQ
>>> > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI
>>> 27
>>> > (level,
>>> > > low) ->
>>> > > > IRQ 27
>>> > > > > pci
>>> > > > > > 0000:00:07.0: PCI INT A -> GSI 30
>>> (level,
>>> > low) ->
>>> > > IRQ 30
>>> > > > pci
>>> > > > > > 0000:00:08.0: PCI INT A -> GSI 31
>>> (level,
>>> > low) ->
>>> > > IRQ 31
>>> > > > pci
>>> > > > > > 0000:00:09.0: PCI INT A -> GSI 32
>>> (level,
>>> > low) ->
>>> > > IRQ 32
>>> > > > pci
>>> > > > > > 0000:00:0a.0: PCI INT A -> GSI 33
>>> (level,
>>> > low) ->
>>> > > IRQ 33
>>> > > > pci
>>> > > > > > 0000:00:1c.0: PCI INT A -> GSI 16
>>> (level,
>>> > low) ->
>>> > > IRQ 16
>>> > > > > > xen_allocate_pirq: returning irq 16
>>> for gsi
>>> > 16
>>> > > Already
>>> > > > setup the
>>> > > > > GSI :16
>>> > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16
>>> > (level, low)
>>> > > -> IRQ
>>> > > > 16 pci
>>> > > > > > 0000:00:1c.5: PCI INT B -> GSI 17
>>> (level,
>>> > low) ->
>>> > > IRQ 17
>>> > > > NET:
>>> > > > > Registered
>>> > > > > > protocol family 2 IP route cache hash
>>> table
>>> > > entries: 65536
>>> > > > > (order: 7,
>>> > > > > > 524288 bytes) TCP established hash
>>> table
>>> > entries:
>>> > > 262144
>>> > > > (order:
>>> > > > > 10,
>>> > > > > > 4194304 bytes) TCP bind hash table
>>> entries:
>>> > 65536
>>> > > (order:
>>> > > > 10,
>>> > > > > 4718592
>>> > > > > > bytes) TCP: Hash tables configured
>>> > (established
>>> > > 262144
>>> > > > bind
>>> > > > > 65536) TCP
>>> > > > > > reno registered NET: Registered
>>> protocol
>>> > family 1
>>> > > pci
>>> > > > > 0000:01:00.0:
>>> > > > > > Disabling L0s pci 0000:01:00.1:
>>> Disabling
>>> > L0s
>>> > > Trying to
>>> > > > unpack
>>> > > > > rootfs
>>> > > > > > image as initramfs... Freeing initrd
>>> memory:
>>> > 6474k
>>> > > freed
>>> > > > DMA-API:
>>> > > > > > preallocated 32768 debug entries
>>> DMA-API:
>>> > debugging
>>> > > > enabled by
>>> > > > > kernel
>>> > > > > > config PCI-DMA: Using software bounce
>>> > buffering for
>>> > > IO
>>> > > > (SWIOTLB)
>>> > > > > DMA:
>>> > > > > > Placing 64MB software IO TLB between
>>> > > ffff880007525000 -
>>> > > > > ffff88000b525000
>>> > > > > > DMA: software IO TLB at phys
>>> 0x7525000 -
>>> > 0xb525000
>>> > > audit:
>>> > > > > initializing
>>> > > > > > netlink socket (disabled) type=2000
>>> > > > audit(1268750702.035:1):
>>> > > > > initialized
>>> > > > > > HugeTLB registered 2 MB page size,
>>> > pre-allocated 0
>>> > > pages
>>> > > > VFS:
>>> > > > > Disk
>>> > > > > > quotas dquot_6.5.2 Dquot-cache hash
>>> table
>>> > entries:
>>> > > 512
>>> > > > (order 0,
>>> > > > > 4096
>>> > > > > > bytes) msgmni has been set to 2970
>>> > cryptomgr_test
>>> > > used
>>> > > > greatest
>>> > > > > stack
>>> > > > > > depth: 5864 bytes left cryptomgr_test
>>> used
>>> > greatest
>>> > > stack
>>> > > > depth:
>>> > > > > 5816
>>> > > > > > bytes left alg: No test for stdrng
>>> (krng)
>>> > Block
>>> > > layer SCSI
>>> > > > > generic (bsg)
>>> > > > > > driver version 0.4 loaded (major 252)
>>> io
>>> > scheduler
>>> > > noop
>>> > > > > registered io
>>> > > > > > scheduler anticipatory registered io
>>> > scheduler
>>> > > deadline
>>> > > > > registered io
>>> > > > > > scheduler cfq registered (default)
>>> > pci_hotplug: PCI
>>> > > Hot
>>> > > > Plug PCI
>>> > > > > Core
>>> > > > > > version: 0.5 pciehp
>>> 0000:00:09.0:pcie04: HPC
>>> > > vendor_id
>>> > > > 8086
>>> > > > > device_id
>>> > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI
>>> Express
>>> > Hot Plug
>>> > > > Controller
>>> > > > > Driver
>>> > > > > > version: 0.4 acpiphp: ACPI Hot Plug
>>> PCI
>>> > Controller
>>> > > Driver
>>> > > > > version: 0.5
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > acpiphp_glue: Slot 2 already
>>> registered by
>>> > another
>>> > > hotplug
>>> > > > driver
>>> > > > > > pci-stub: invalid id string "" input:
>>> Sleep
>>> > Button
>>> > > as
>>> > > > > >
>>> > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>>> > > > ACPI:
>>> > > > > Sleep
>>> > > > > > Button [SLPB] input: Power Button as
>>> > > > > >
>>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
>>> > > Power
>>> > > > Button
>>> > > > > [PWRF]
>>> > > > > > registering netback hpet_acpi_add: no
>>> > address or
>>> > > irqs in
>>> > > > _CRS
>>> > > > > > Non-volatile memory driver v1.3 Linux
>>> > agpgart
>>> > > interface
>>> > > > v0.103
>>> > > > > Serial:
>>> > > > > > 8250/16550 driver, 4 ports, IRQ
>>> sharing
>>> > enabled
>>> > > > serial8250: ttyS1
>>> > > > > at I/O
>>> > > > > > 0x2f8 (irq = 3) is a 16550A brd:
>>> module
>>> > loaded
>>> > > loop:
>>> > > > module
>>> > > > > loaded
>>> > > > > > input: Macintosh mouse button
>>> emulation as
>>> > > > > /devices/virtual/input/input2
>>> > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI
>>> 19
>>> > (level, low)
>>> > > -> IRQ
>>> > > > 19
>>> > > > > ahci
>>> > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots
>>> 6
>>> > ports 3
>>> > > Gbps 0x3f
>>> > > > impl
>>> > > > > SATA mode
>>> > > > > > ahci 0000:00:1f.2: flags: 64bit ncq
>>> sntf pm
>>> > led clo
>>> > > pio
>>> > > > slum part
>>> > > > > ccc
>>> > > > > > ems scsi0 : ahci scsi1 : ahci scsi2
>>> : ahci
>>> > scsi3 :
>>> > > ahci
>>> > > > scsi4 :
>>> > > > > ahci
>>> > > > > > scsi5 : ahci ata1: SATA max UDMA/133
>>> > irq_stat
>>> > > 0x00400040,
>>> > > > > connection
>>> > > > > > status changed irq 2996 ata2: SATA
>>> max
>>> > UDMA/133
>>> > > abar
>>> > > > > m2048@0xb1a00000
>>> > > > > > port 0xb1a00180 irq 2996 ata3: SATA
>>> max
>>> > UDMA/133
>>> > > abar
>>> > > > > m2048@0xb1a00000
>>> > > > > > port 0xb1a00200 irq 2996 ata4: SATA
>>> max
>>> > UDMA/133
>>> > > abar
>>> > > > > m2048@0xb1a00000
>>> > > > > > port 0xb1a00280 irq 2996 ata5: SATA
>>> max
>>> > UDMA/133
>>> > > abar
>>> > > > > m2048@0xb1a00000
>>> > > > > > port 0xb1a00300 irq 2996 ata6: SATA
>>> max
>>> > UDMA/133
>>> > > abar
>>> > > > > m2048@0xb1a00000
>>> > > > > > port 0xb1a00380 irq 2996 Fixed MDIO
>>> Bus:
>>> > probed
>>> > > ehci_hcd:
>>> > > > USB 2.0
>>> > > > > > 'Enhanced' Host Controller (EHCI)
>>> Driver
>>> > ehci_hcd
>>> > > > 0000:00:1a.7:
>>> > > > > PCI INT
>>> > > > > > C -> GSI 18 (level, low) -> IRQ 18
>>> ehci_hcd
>>> > > 0000:00:1a.7:
>>> > > > EHCI
>>> > > > > Host
>>> > > > > > Controller ehci_hcd 0000:00:1a.7: new
>>> USB
>>> > bus
>>> > > registered,
>>> > > > > assigned bus
>>> > > > > > number 1 ehci_hcd 0000:00:1a.7: debug
>>> port 1
>>> > > ehci_hcd
>>> > > > > 0000:00:1a.7: irq
>>> > > > > > 18, io mem 0xb1a02000 ehci_hcd
>>> 0000:00:1a.7:
>>> > USB
>>> > > 2.0
>>> > > > started,
>>> > > > > EHCI 1.00
>>> > > > > > usb usb1: New USB device found,
>>> > idVendor=1d6b,
>>> > > > idProduct=0002 usb
>>> > > > > usb1:
>>> > > > > > New USB device strings: Mfr=3,
>>> Product=2,
>>> > > SerialNumber=1
>>> > > > usb
>>> > > > > usb1:
>>> > > > > > Product: EHCI Host Controller usb
>>> usb1:
>>> > > Manufacturer:
>>> > > > Linux
>>> > > > > 2.6.32.9
>>> > > > > > ehci_hcd usb usb1: SerialNumber:
>>> > 0000:00:1a.7 usb
>>> > > usb1:
>>> > > > > configuration #1
>>> > > > > > chosen from 1 choice hub 1-0:1.0: USB
>>> hub
>>> > found hub
>>> > > > 1-0:1.0: 6
>>> > > > > ports
>>> > > > > > detected ehci_hcd 0000:00:1d.7: PCI
>>> INT A ->
>>> > GSI 23
>>> > > > (level, low)
>>> > > > > -> IRQ
>>> > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host
>>> > Controller
>>> > > ehci_hcd
>>> > > > > 0000:00:1d.7:
>>> > > > > > new USB bus registered, assigned bus
>>> number
>>> > 2
>>> > > ehci_hcd
>>> > > > > 0000:00:1d.7:
>>> > > > > > debug port 1 ehci_hcd 0000:00:1d.7:
>>> irq 23,
>>> > io mem
>>> > > > 0xb1a01000
>>> > > > > ehci_hcd
>>> > > > > > 0000:00:1d.7: USB 2.0 started, EHCI
>>> 1.00 usb
>>> > usb2:
>>> > > New USB
>>> > > > device
>>> > > > > found,
>>> > > > > > idVendor=1d6b, idProduct=0002 usb
>>> usb2: New
>>> > USB
>>> > > device
>>> > > > strings:
>>> > > > > Mfr=3,
>>> > > > > > Product=2, SerialNumber=1 usb usb2:
>>> Product:
>>> > EHCI
>>> > > Host
>>> > > > Controller
>>> > > > > usb
>>> > > > > > usb2: Manufacturer: Linux 2.6.32.9
>>> ehci_hcd
>>> > usb
>>> > > usb2:
>>> > > > > SerialNumber:
>>> > > > > > 0000:00:1d.7 usb usb2: configuration
>>> #1
>>> > chosen from
>>> > > 1
>>> > > > choice hub
>>> > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6
>>> ports
>>> > > detected
>>> > > > ohci_hcd:
>>> > > > > USB 1.1
>>> > > > > > 'Open' Host Controller (OHCI) Driver
>>> > uhci_hcd: USB
>>> > > > Universal Host
>>> > > > > > Controller Interface driver
>>> > xen_allocate_pirq:
>>> > > returning
>>> > > > irq 16
>>> > > > > for gsi
>>> > > > > > 16 Already setup the GSI :16 uhci_hcd
>>> > 0000:00:1a.0:
>>> > > PCI
>>> > > > INT A ->
>>> > > > > GSI 16
>>> > > > > > (level, low) -> IRQ 16 uhci_hcd
>>> > 0000:00:1a.0: UHCI
>>> > > Host
>>> > > > > Controller
>>> > > > > > uhci_hcd 0000:00:1a.0: new USB bus
>>> > registered,
>>> > > assigned
>>> > > > bus
>>> > > > > number 3
>>> > > > > > uhci_hcd 0000:00:1a.0: irq 16, io
>>> base
>>> > 0x000020e0
>>> > > usb
>>> > > > usb3: New
>>> > > > > USB
>>> > > > > > device found, idVendor=1d6b,
>>> idProduct=0001
>>> > usb
>>> > > usb3: New
>>> > > > USB
>>> > > > > device
>>> > > > > > strings: Mfr=3, Product=2,
>>> SerialNumber=1
>>> > usb usb3:
>>> > > > Product: UHCI
>>> > > > > Host
>>> > > > > > Controller usb usb3: Manufacturer:
>>> Linux
>>> > 2.6.32.9
>>> > > uhci_hcd
>>> > > > usb
>>> > > > > usb3:
>>> > > > > > SerialNumber: 0000:00:1a.0 usb usb3:
>>> > configuration
>>> > > #1
>>> > > > chosen from
>>> > > > > 1
>>> > > > > > choice hub 3-0:1.0: USB hub found hub
>>> > 3-0:1.0: 2
>>> > > ports
>>> > > > detected
>>> > > > > uhci_hcd
>>> > > > > > 0000:00:1a.1: PCI INT B -> GSI 21
>>> (level,
>>> > low) ->
>>> > > IRQ 21
>>> > > > uhci_hcd
>>> > > > > > 0000:00:1a.1: UHCI Host Controller
>>> uhci_hcd
>>> > > 0000:00:1a.1:
>>> > > > new USB
>>> > > > > bus
>>> > > > > > registered, assigned bus number 4
>>> uhci_hcd
>>> > > 0000:00:1a.1:
>>> > > > irq 21,
>>> > > > > io base
>>> > > > > > 0x000020c0 usb usb4: New USB device
>>> found,
>>> > > idVendor=1d6b,
>>> > > > > idProduct=0001
>>> > > > > > usb usb4: New USB device strings:
>>> Mfr=3,
>>> > Product=2,
>>> > > > > SerialNumber=1 usb
>>> > > > > > usb4: Product: UHCI Host Controller
>>> usb
>>> > usb4:
>>> > > > Manufacturer: Linux
>>> > > > > > 2.6.32.9 uhci_hcd usb usb4:
>>> SerialNumber:
>>> > > 0000:00:1a.1 usb
>>> > > > usb4:
>>> > > > > > configuration #1 chosen from 1 choice
>>> hub
>>> > 4-0:1.0:
>>> > > USB hub
>>> > > > found
>>> > > > > hub
>>> > > > > > 4-0:1.0: 2 ports detected
>>> xen_allocate_pirq:
>>> > > returning irq
>>> > > > 19 for
>>> > > > > gsi 19
>>> > > > > > Already setup the GSI :19 uhci_hcd
>>> > 0000:00:1a.2:
>>> > > PCI INT D
>>> > > > -> GSI
>>> > > > > 19
>>> > > > > > (level, low) -> IRQ 19 uhci_hcd
>>> > 0000:00:1a.2: UHCI
>>> > > Host
>>> > > > > Controller
>>> > > > > > uhci_hcd 0000:00:1a.2: new USB bus
>>> > registered,
>>> > > assigned
>>> > > > bus
>>> > > > > number 5
>>> > > > > > uhci_hcd 0000:00:1a.2: irq 19, io
>>> base
>>> > 0x000020a0
>>> > > usb
>>> > > > usb5: New
>>> > > > > USB
>>> > > > > > device found, idVendor=1d6b,
>>> idProduct=0001
>>> > usb
>>> > > usb5: New
>>> > > > USB
>>> > > > > device
>>> > > > > > strings: Mfr=3, Product=2,
>>> SerialNumber=1
>>> > usb usb5:
>>> > > > Product: UHCI
>>> > > > > Host
>>> > > > > > Controller usb usb5: Manufacturer:
>>> Linux
>>> > 2.6.32.9
>>> > > uhci_hcd
>>> > > > usb
>>> > > > > usb5:
>>> > > > > > SerialNumber: 0000:00:1a.2 usb usb5:
>>> > configuration
>>> > > #1
>>> > > > chosen from
>>> > > > > 1
>>> > > > > > choice hub 5-0:1.0: USB hub found hub
>>> > 5-0:1.0: 2
>>> > > ports
>>> > > > detected
>>> > > > > > xen_allocate_pirq: returning irq 23
>>> for gsi
>>> > 23
>>> > > Already
>>> > > > setup the
>>> > > > > GSI :23
>>> > > > > > uhci_hcd 0000:00:1d.0: PCI INT A ->
>>> GSI 23
>>> > (level,
>>> > > low) ->
>>> > > > IRQ 23
>>> > > > > > uhci_hcd 0000:00:1d.0: UHCI Host
>>> Controller
>>> > > uhci_hcd
>>> > > > > 0000:00:1d.0: new
>>> > > > > > USB bus registered, assigned bus
>>> number 6
>>> > uhci_hcd
>>> > > > 0000:00:1d.0:
>>> > > > > irq 23,
>>> > > > > > io base 0x00002080 usb usb6: New USB
>>> device
>>> > found,
>>> > > > idVendor=1d6b,
>>> > > > > > idProduct=0001 usb usb6: New USB
>>> device
>>> > strings:
>>> > > Mfr=3,
>>> > > > > Product=2,
>>> > > > > > SerialNumber=1 usb usb6: Product:
>>> UHCI Host
>>> > > Controller usb
>>> > > > usb6:
>>> > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd
>>> usb
>>> > usb6:
>>> > > > SerialNumber:
>>> > > > > > 0000:00:1d.0 usb usb6: configuration
>>> #1
>>> > chosen from
>>> > > 1
>>> > > > choice hub
>>> > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2
>>> ports
>>> > > detected
>>> > > > > xen_allocate_pirq:
>>> > > > > > returning irq 19 for gsi 19 Already
>>> setup
>>> > the GSI
>>> > > :19
>>> > > > uhci_hcd
>>> > > > > > 0000:00:1d.1: PCI INT B -> GSI 19
>>> (level,
>>> > low) ->
>>> > > IRQ 19
>>> > > > uhci_hcd
>>> > > > > > 0000:00:1d.1: UHCI Host Controller
>>> uhci_hcd
>>> > > 0000:00:1d.1:
>>> > > > new USB
>>> > > > > bus
>>> > > > > > registered, assigned bus number 7
>>> uhci_hcd
>>> > > 0000:00:1d.1:
>>> > > > irq 19,
>>> > > > > io base
>>> > > > > > 0x00002060 usb usb7: New USB device
>>> found,
>>> > > idVendor=1d6b,
>>> > > > > idProduct=0001
>>> > > > > > usb usb7: New USB device strings:
>>> Mfr=3,
>>> > Product=2,
>>> > > > > SerialNumber=1 usb
>>> > > > > > usb7: Product: UHCI Host Controller
>>> usb
>>> > usb7:
>>> > > > Manufacturer: Linux
>>> > > > > > 2.6.32.9 uhci_hcd usb usb7:
>>> SerialNumber:
>>> > > 0000:00:1d.1 usb
>>> > > > usb7:
>>> > > > > > configuration #1 chosen from 1 choice
>>> hub
>>> > 7-0:1.0:
>>> > > USB hub
>>> > > > found
>>> > > > > hub
>>> > > > > > 7-0:1.0: 2 ports detected
>>> xen_allocate_pirq:
>>> > > returning irq
>>> > > > 18 for
>>> > > > > gsi 18
>>> > > > > > Already setup the GSI :18 uhci_hcd
>>> > 0000:00:1d.2:
>>> > > PCI INT C
>>> > > > -> GSI
>>> > > > > 18
>>> > > > > > (level, low) -> IRQ 18 uhci_hcd
>>> > 0000:00:1d.2: UHCI
>>> > > Host
>>> > > > > Controller
>>> > > > > > uhci_hcd 0000:00:1d.2: new USB bus
>>> > registered,
>>> > > assigned
>>> > > > bus
>>> > > > > number 8
>>> > > > > > uhci_hcd 0000:00:1d.2: irq 18, io
>>> base
>>> > 0x00002040
>>> > > usb
>>> > > > usb8: New
>>> > > > > USB
>>> > > > > > device found, idVendor=1d6b,
>>> idProduct=0001
>>> > usb
>>> > > usb8: New
>>> > > > USB
>>> > > > > device
>>> > > > > > strings: Mfr=3, Product=2,
>>> SerialNumber=1
>>> > usb usb8:
>>> > > > Product: UHCI
>>> > > > > Host
>>> > > >
>>> > >
>>> > > References
>>> > >
>>> > > Visible links
>>> > > 1. mailto:[20][21]pasik@xxxxxx
>>> > > 2. mailto:[21][22]pasik@xxxxxx
>>> > > 3. mailto:[22][23]pasik@xxxxxx
>>> > > 4. mailto:[23][24]pasik@xxxxxx
>>> > > 5. mailto:[24][25]pasik@xxxxxx
>>> > > 6.
>>> >
>>> [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > 7.
>>> >
>>> [26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > 8. mailto:[27][28]pasik@xxxxxx
>>> > > 9.
>>> >
>>> [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > 10.
>>> >
>>> [29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > 11. mailto:[30][31]pasik@xxxxxx
>>> > > 12. mailto:[31][32]pasik@xxxxxx
>>> > > 13.
>>> >
>>> [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > 14.
>>> >
>>> [33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > 15. mailto:[34][35]pasik@xxxxxx
>>> > > 16.
>>> >
>>> [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > > 17.
>>> >
>>> [36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > > 18. mailto:[37][38]pasik@xxxxxx
>>> >
>>> > References
>>> >
>>> > Visible links
>>> > 1. mailto:[39]pasik@xxxxxx
>>> > 2. mailto:[40]pasik@xxxxxx
>>> > 3. mailto:[41]pasik@xxxxxx
>>> > 4. mailto:[42]pasik@xxxxxx
>>> > 5. mailto:[43]pasik@xxxxxx
>>> > 6. mailto:[44]pasik@xxxxxx
>>> > 7.
>>> [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 8.
>>> [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 9. mailto:[47]pasik@xxxxxx
>>> > 10.
>>> [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 11.
>>> [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 12. mailto:[50]pasik@xxxxxx
>>> > 13. mailto:[51]pasik@xxxxxx
>>> > 14.
>>> [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 15.
>>> [53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 16. mailto:[54]pasik@xxxxxx
>>> > 17.
>>> [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 18.
>>> [56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 19. mailto:[57]pasik@xxxxxx
>>> > 20. mailto:[58]pasik@xxxxxx
>>> > 21. mailto:[59]pasik@xxxxxx
>>> > 22. mailto:[60]pasik@xxxxxx
>>> > 23. mailto:[61]pasik@xxxxxx
>>> > 24. mailto:[62]pasik@xxxxxx
>>> > 25.
>>> [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 26.
>>> [64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 27. mailto:[65]pasik@xxxxxx
>>> > 28.
>>> [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 29.
>>> [67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 30. mailto:[68]pasik@xxxxxx
>>> > 31. mailto:[69]pasik@xxxxxx
>>> > 32.
>>> [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 33.
>>> [71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 34. mailto:[72]pasik@xxxxxx
>>> > 35.
>>> [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> > 36.
>>> [74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> > 37. mailto:[75]pasik@xxxxxx
>>>
>>> References
>>>
>>> Visible links
>>> 1. mailto:pasik@xxxxxx
>>> 2. mailto:pasik@xxxxxx
>>> 3. mailto:pasik@xxxxxx
>>> 4. mailto:pasik@xxxxxx
>>> 5. mailto:pasik@xxxxxx
>>> 6. mailto:pasik@xxxxxx
>>> 7. mailto:pasik@xxxxxx
>>> 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 9. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 10. mailto:pasik@xxxxxx
>>> 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 12. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 13. mailto:pasik@xxxxxx
>>> 14. mailto:pasik@xxxxxx
>>> 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 16. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 17. mailto:pasik@xxxxxx
>>> 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 19. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 20. mailto:pasik@xxxxxx
>>> 21. mailto:pasik@xxxxxx
>>> 22. mailto:pasik@xxxxxx
>>> 23. mailto:pasik@xxxxxx
>>> 24. mailto:pasik@xxxxxx
>>> 25. mailto:pasik@xxxxxx
>>> 26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 27. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 28. mailto:pasik@xxxxxx
>>> 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 30. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 31. mailto:pasik@xxxxxx
>>> 32. mailto:pasik@xxxxxx
>>> 33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 34. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 35. mailto:pasik@xxxxxx
>>> 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 37. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 38. mailto:pasik@xxxxxx
>>> 39. mailto:pasik@xxxxxx
>>> 40. mailto:pasik@xxxxxx
>>> 41. mailto:pasik@xxxxxx
>>> 42. mailto:pasik@xxxxxx
>>> 43. mailto:pasik@xxxxxx
>>> 44. mailto:pasik@xxxxxx
>>> 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 46. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 47. mailto:pasik@xxxxxx
>>> 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 49. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 50. mailto:pasik@xxxxxx
>>> 51. mailto:pasik@xxxxxx
>>> 52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 53. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 54. mailto:pasik@xxxxxx
>>> 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 56. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 57. mailto:pasik@xxxxxx
>>> 58. mailto:pasik@xxxxxx
>>> 59. mailto:pasik@xxxxxx
>>> 60. mailto:pasik@xxxxxx
>>> 61. mailto:pasik@xxxxxx
>>> 62. mailto:pasik@xxxxxx
>>> 63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 64. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 65. mailto:pasik@xxxxxx
>>> 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 67. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 68. mailto:pasik@xxxxxx
>>> 69. mailto:pasik@xxxxxx
>>> 70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 71. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 72. mailto:pasik@xxxxxx
>>> 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>> 74. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>> 75. mailto:pasik@xxxxxx
>>>
>>
>>
>
mar_19.doc
Description: MS-Word document
Screenshot.png
Description: PNG image
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9, (continued)
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9, kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Jeremy Fitzhardinge
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(),
kishore kumar <=
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), kishore kumar
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
- [Xen-users] unsubscribe, Graham, Matthew S (Matthew)
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Konrad Rzeszutek Wilk
- Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs(), Pasi Kärkkäinen
|
|
|
Home
