On Mon, Mar 22, 2010 at 01:23:24PM -0700, kishore kumar wrote:
> xend was not running so I did below steps and rebooted. The system did
> not boot up. SO I removed the line added in /proc/fstab and again
> rebooted. Attached is the captured file. Can you please let me know what
> is going wrong again?
>
Please send the logs as text files, not word documents!
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Looks like wrong root= parameter again..
Command line: ro root=/dev/VolGroup01/Logvol00 console=hvc0 earlyprintk=xen
nomodeset initcall_debug debug loglevel=10
Was "/dev/VolGroup01/Logvol00" your root device?
-- Pasi
> step 1. I loaded the xen-evtchn.ko by insmod.
>
>
>
> step 2: And added the below line in /proc/fstab.
>
>
>
> none /proc/xen xenfs defaults 0 0
>
>
> Thanks
>
> On Fri, Mar 19, 2010 at 1:03 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
> On Fri, Mar 19, 2010 at 12:57:58PM -0700, kishore kumar wrote:
> > Attached is the captured file.
> >
> > Now the machine booted up. :) 2.6.32.10 is booted.
> >
> > But I dont see xen up and running.
> >
> > Whe I open Virtual Machine Manager I dont see xen running.
> (ATTACHED IS
> > THE SCREEN SHOT).
> >
>
> - Do you have /proc/xen (xenfs) mounted?
> - Do you have xen-evtchn driver module loaded in dom0?
> - Do you have xend running?
>
> Please see and read this wiki page:
> [2]http://wiki.xensource.com/xenwiki/XenParavirtOps
>
> It explains the other configurations you need to do for Xen/xend to
> actually work.
>
> Anyway, the problem for you was wrong grub.conf root= option for the
> dom0 kernel.
>
> -- Pasi
>
> > On Fri, Mar 19, 2010 at 12:05 PM, Pasi Kärkkäinen
> <[1][3]pasik@xxxxxx> wrote:
> >
> > On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge
> wrote:
> > > On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote:
> > >> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote:
> > >>
> > >>> Attached is the capture log after changing the grub.conf
> to
> > >>>
> > >>> ro root=/dev/VolGroup01/LogVol00 console=hvc0
> earlyprintk=xen
> > nomodeset
> > >>> initcall_debug debug swiotlb=force apic=debug loglevel=10
> > >>>
> > >>> for the dom 0 kernel command line.
> > >>>
> > >>>
> > >> Hmm, interesting. Now it seems to crash in a different place.
> > >>
> > >> Jeremy: Have you seen this one earlier?
> > >>
> > >
> > > No, but it looks like the result of "apic=debug" on the kernel
> command
> > > line. That won't do anything useful (the kernel has no APICs,
> they
> > all
> > > belong to Xen), and can only cause harm. As it appears to have
> done.
> > >
> >
> > Ok, my bad.
> >
> > So please remove the "apic=debug" from the dom0 kernel cmdline
> and try
> > again.
> > It should look like this:
> >
> > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen
> nomodeset
> > initcall_debug debug loglevel=10
> >
> > -- Pasi
> >
> > > J
> > >
> > >> .... IRQ redirection table:
> > >> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> > >> 00 000 0 0 0 0 0 0 0 00
> > >> IRQ to pin mappings:
> > >> BUG: unable to handle kernel NULL pointer dereference at
> (null)
> > >> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
> > >> PGD 0
> > >> Oops: 0000 [#1] SMP
> > >> last sysfs file:
> > >> CPU 0
> > >> Modules linked in:
> > >> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2
> > >> RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>]
> > print_all_ICs+0x487/0x500
> > >> RSP: e02b:ffff880064edbe20 EFLAGS: 00010286
> > >> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX:
> 000000000f640f01
> > >> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI:
> 0000000000000000
> > >> RBP: ffff880064edbea0 R08: 0000000000000002 R09:
> 0000000000000000
> > >> R10: 0000000000000000 R11: ffff880064edbce0 R12:
> 0000000000000000
> > >> R13: 0000000000000000 R14: 0000000000000000 R15:
> 0000000000000000
> > >> FS: 0000000000000000(0000) GS:ffff880005ec8000(0000)
> > knlGS:0000000000000000
> > >> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> > >> CR2: 0000000000000000 CR3: 0000000001001000 CR4:
> 0000000000002660
> > >> DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> > >> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
> 0000000000000400
> > >> Process swapper (pid: 1, threadinfo ffff880064eda000, task
> > ffff880064ee0000)
> > >> Stack:
> > >> ffff880000000000 ffffffff00000000 ffff880000000000
> ffffffff811ebee8
> > >> <0> ffff880064edbe60 0000000181083e7c 000000ff00000002
> > 0000000000000002
> > >> <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660
> > 00000000291fd332
> > >> Call Trace:
> > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
> > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
> > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
> > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
> > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
> > >> [<ffffffff81013eaa>] child_rip+0xa/0x20
> > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
> > >> [<ffffffff81013810>] ? restore_args+0x0/0x30
> > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
> > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
> > >> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31
> e4 e8
> > 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58
> 40<48>
> > 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4
> > >> RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
> > >> RSP<ffff880064edbe20>
> > >> CR2: 0000000000000000
> > >> ---[ end trace 0007ad9d59420718 ]---
> > >> swapper used greatest stack depth: 4168 bytes left
> > >> Kernel panic - not syncing: Attempted to kill init!
> > >> Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2
> > >> Call Trace:
> > >> [<ffffffff8105b747>] panic+0xa5/0x167
> > >> [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
> > >> [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701
> > >> [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1
> > >> [<ffffffff8108f823>] ? lock_release+0x179/0x184
> > >> [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
> > >> [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
> > >> [<ffffffff8105efa7>] do_exit+0x7e/0x701
> > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
> > >> [<ffffffff8147764c>] oops_end+0xbf/0xc7
> > >> [<ffffffff81038a02>] no_context+0x1f1/0x200
> > >> [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
> > >> [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4
> > >> [<ffffffff8100f452>] ? check_events+0x12/0x20
> > >> [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15
> > >> [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2
> > >> [<ffffffff814769d5>] page_fault+0x25/0x30
> > >> [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500
> > >> [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
> > >> [<ffffffff810846f0>] ? ktime_get+0x78/0x93
> > >> [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
> > >> [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
> > >> [<ffffffff819ae961>] kernel_init+0x172/0x1cc
> > >> [<ffffffff81013eaa>] child_rip+0xa/0x20
> > >> [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
> > >> [<ffffffff81013810>] ? restore_args+0x0/0x30
> > >> [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
> > >> [<ffffffff81013ea0>] ? child_rip+0x0/0x20
> > >>
> > >>
> > >> -- Pasi
> > >>
> > >>
> > >>
> > >>>
> > >>> On Thu, Mar 18, 2010 at 2:27 PM, Pasi
> > Kärkkäinen<[1][2][4]pasik@xxxxxx> wrote:
> > >>>
> > >>> On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar
> wrote:
> > >>> > pvdisplay does not work in my RHEL machine.
> > >>> >
> > >>> > I did pvscan.
> > >>> > below is the output.
> > >>> >
> > >>> > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0
> free]
> > >>> >
> > >>> > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in
> no VG:
> > 0 [0 ]
> > >>> >
> > >>>
> > >>> Ok so /dev/sda2 is the correct device holding the
> VolGroup01.
> > >>>
> > >>> Looking at your latest capture.doc I see this:
> > >>>
> > >>> Command line: ro root=/dev/vg00/lv01 console=hvc0
> > earlyprintk=xen
> > >>> nomodeset initcall_debug debug swiotlb=force apic=debug
> > loglevel=10
> > >>>
> > >>> So your root= parameter is wrong! Edit grub.conf and
> replace
> > it with the
> > >>> actual root device:
> > >>> root=/dev/VolGroup01/LogVol00
> > >>>
> > >>> -- Pasi
> > >>>
> > >>> > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen
> > >>> <[1][2][3][5]pasik@xxxxxx> wrote:
> > >>> >
> > >>> > On Thu, Mar 18, 2010 at 11:16:26AM -0700,
> kishore
> > kumar wrote:
> > >>> > > I did the below steps for pvops dom 0
> kernel.
> > >>> > >
> > >>> > > make menuconfig
> > >>> > > make bzImage
> > >>> > > make modules
> > >>> > > make modules_install
> > >>> > > cp -a .config /boot/config-2.6.32.10
> > >>> > > cp -a System.map
> /boot/System.map-2.6.32.10
> > >>> > > cp -a arch/x86/boot/bzImage
> > /boot/vmlinuz-2.6.32.10
> > >>> > > /sbin/mkinitrd -f --builtin=ahci
> > /boot/initrd-2.6.32.10.img
> > >>> > 2.6.32.10
> > >>> > > I tried root=/dev/VolGroup01/LogVol00 .
> > >>> > >
> > >>> >
> > >>> > Ok.
> > >>> >
> > >>> > Please run "pvdisplay" to see which actual
> partition
> > is the LVM
> > >>> PV for
> > >>> > your
> > >>> > volume group.
> > >>> >
> > >>> > Also if you're running Fedora 12 you could try
> > generating an
> > >>> initrd
> > >>> > image
> > >>> > with dracut instead of mkinitrd.
> > >>> >
> > >>> > -- Pasi
> > >>> >
> > >>> > >
> > >>> > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi
> Kärkkäinen
> > >>> > <[1][2][3][4][6]pasik@xxxxxx> wrote:
> > >>> > >
> > >>> > > On Wed, Mar 17, 2010 at 03:20:13PM
> -0700,
> > kishore kumar
> > >>> wrote:
> > >>> > > > Here is the output of df -h and
> cat
> > /etc/fstab of my
> > >>> > machine.
> > >>> > > >
> > >>> > >
> > >>> > > Did you try both
> > root=/dev/mapper/VolGroup01-LogVol00 and
> > >>> > > root=/dev/VolGroup01/LogVol00 arguments
> for
> > the dom0
> > >>> kernel?
> > >>> > >
> > >>> > > How did you generate the initrd image
> for the
> > dom0 kernel?
> > >>> > >
> > >>> > > Anyway this sounds like a grub.conf or
> initrd
> > problem, not
> > >>> Xen or
> > >>> > pvops
> > >>> > > dom0 kernel kernel problem.
> > >>> > >
> > >>> > > -- Pasi
> > >>> > >
> > >>> > > > Please let me know your thoughts.
> > >>> > > >
> > >>> > > > [root@localhost kishore]# df -h
> > >>> > > >
> > >>> > > > Filesystem Size Used Avail Use%
> Mounted
> > on
> > >>> > > >
> > >>> > > > /dev/mapper/VolGroup01-LogVol00
> > >>> > > >
> > >>> > > >
> 223G
> > 29G 182G 14%
> > >>> /
> > >>> > > >
> > >>> > > > /dev/sda1 99M 81M 13M 87% /boot
> > >>> > > >
> > >>> > > > tmpfs 757M 0 757M 0% /dev/shm
> > >>> > > >
> > >>> > > > [root@localhost kishore]# cat
> /etc/fstab
> > >>> > > >
> > >>> > > > /dev/VolGroup01/LogVol00 / ext3
> defaults
> > 1 1
> > >>> > > >
> > >>> > > > LABEL=/boot /boot ext3 defaults 1
> 2
> > >>> > > >
> > >>> > > > tmpfs /dev/shm tmpfs defaults 0 0
> > >>> > > >
> > >>> > > > devpts /dev/pts devpts
> gid=5,mode=620 0
> > 0
> > >>> > > >
> > >>> > > > sysfs /sys sysfs defaults 0 0
> > >>> > > >
> > >>> > > > proc /proc proc defaults 0 0
> > >>> > > >
> > >>> > > > /dev/VolGroup01/LogVol01 swap
> swap
> > defaults 0 0
> > >>> > > >
> > >>> > > > [root@localhost kishore]#
> > >>> > > >
> > >>> > > > On Tue, Mar 16, 2010 at 4:18 PM,
> Pasi
> > Kärkkäinen
> > >>> > > <[1][2][3][4][5][7]pasik@xxxxxx>
> wrote:
> > >>> > > >
> > >>> > > > On Tue, Mar 16, 2010 at
> 03:40:46PM
> > -0700, kishore
> > >>> kumar
> > >>> > wrote:
> > >>> > > > > I am not sure. Can you
> please
> > let me know how
> > >>> to
> > >>> > check
> > >>> > > this? any
> > >>> > > > command
> > >>> > > > > ??
> > >>> > > >
> > >>> > > > well simple "df -h" will show
> it. and
> > also "cat
> > >>> > /etc/fstab".
> > >>> > > > You can also check it from your
> grub
> > >>> configuration.. from
> > >>> > the
> > >>> > > working
> > >>> > > > baremetal (non-Xen) entry.
> > >>> > > >
> > >>> > > > -- Pasi
> > >>> > > > >
> > >>> > > > > On Tue, Mar 16, 2010 at
> 3:29 PM,
> > Pasi
> > >>> Kärkkäinen
> > >>> > > >
> <[1][2][3][4][5][6][8]pasik@xxxxxx>
> > wrote:
> > >>> > > > >
> > >>> > > > > On Tue, Mar 16, 2010 at
> > 03:22:50PM -0700,
> > >>> kishore
> > >>> > kumar
> > >>> > > wrote:
> > >>> > > > > > attached is the
> log
> > captured in with
> > >>> the word
> > >>> > > document .
> > >>> > > > > >
> > >>> > > > >
> > >>> > > > > Scanning logical
> volumes
> > >>> > > > > Reading all physical
> volumes.
> > This may
> > >>> take a
> > >>> > while...
> > >>> > > > > Activating logical
> volumes
> > >>> > > > > Volume group
> "VolGroup01" not
> > found
> > >>> > > > > Trying to resume from
> > >>> /dev/VolGroup01/LogVol01
> > >>> > > > > Unable to access resume
> device
> > >>> > (/dev/VolGroup01/LogVol01)
> > >>> > > > > Creating root device.
> > >>> > > > > Mounting root
> filesystem.
> > >>> > > > > mount: could not find
> > filesystem '/dev/root'
> > >>> > > > > Setting up other
> filesystems.
> > >>> > > > > Setting up new root fs
> > >>> > > > > setuproot: moving /dev
> failed:
> > No such file
> > >>> or
> > >>> > directory
> > >>> > > > > no fstab.sys, mounting
> > internal defaults
> > >>> > > > > setuproot: error
> mounting
> > /proc: No such
> > >>> file or
> > >>> > directory
> > >>> > > > > setuproot: error
> mounting
> > /sys: No such file
> > >>> or
> > >>> > directory
> > >>> > > > > Switching to new root
> and
> > running init.
> > >>> > > > > unmounting old /dev
> > >>> > > > > unmounting old /proc
> > >>> > > > > unmounting old /sys
> > >>> > > > > switchroot: mount
> failed: No
> > such file or
> > >>> directory
> > >>> > > > > init used greatest
> stack
> > depth: 4088 bytes
> > >>> left
> > >>> > > > > Kernel panic - not
> syncing:
> > Attempted to
> > >>> kill init!
> > >>> > > > >
> > >>> > > > > So it seems it gets all
> the
> > way to executing
> > >>> the
> > >>> > initrd
> > >>> > > image,
> > >>> > > > > which then fails to
> mount the
> > root fs.
> > >>> > > > >
> > >>> > > > > Earlier in the log:
> > >>> > > > > ata1: SATA link up 3.0
> Gbps
> > (SStatus 123
> > >>> SControl
> > >>> > 300)
> > >>> > > > > ata1.00: ATA-8: Hitachi
> > HDT721025SLA380,
> > >>> STBOA3AA,
> > >>> > max
> > >>> > > UDMA/133
> > >>> > > > > ata1.00: 488397168
> sectors,
> > multi 0: LBA48
> > >>> NCQ
> > >>> > (depth
> > >>> > > 31/32), AA
> > >>> > > > > ata1.00: configured for
> > UDMA/133
> > >>> > > > > scsi 0:0:0:0:
> Direct-Access
> > ATA
> > >>> Hitachi
> > >>> > HDT72102
> > >>> > > STBO
> > >>> > > > PQ: 0
> > >>> > > > > ANSI: 5
> > >>> > > > > sd 0:0:0:0: Attached
> scsi
> > generic sg0 type 0
> > >>> > > > > sd 0:0:0:0: [sda]
> 488397168
> > 512-byte logical
> > >>> > blocks: (250
> > >>> > > GB/232
> > >>> > > > GiB)
> > >>> > > > > sd 0:0:0:0: [sda] Write
> > Protect is off
> > >>> > > > > sd 0:0:0:0: [sda] Mode
> Sense:
> > 00 3a 00 00
> > >>> > > > > sd 0:0:0:0: [sda] Write
> cache:
> > enabled, read
> > >>> cache:
> > >>> > > enabled,
> > >>> > > > doesn't
> > >>> > > > > support DPO or FUA
> > >>> > > > > sda: sda1 sda2
> > >>> > > > > sd 0:0:0:0: [sda]
> Attached
> > SCSI disk
> > >>> > > > >
> > >>> > > > > so /dev/sda was
> detected. Is
> > your root lvm
> > >>> volume
> > >>> > on
> > >>> > > /dev/sda ?
> > >>> > > > > Is
> /dev/VolGroup01/LogVol01
> > really your root
> > >>> fs?
> > >>> > > > >
> > >>> > > > > -- Pasi
> > >>> > > > >
> > >>> > > > > >
> > >>> > > > > >
> > >>> > > > > > On Tue, Mar 16,
> 2010 at
> > 3:03 PM, Pasi
> > >>> > Kärkkäinen
> > >>> > > > >
> > <[1][2][3][4][5][6][7][9]pasik@xxxxxx> wrote:
> > >>> > > > > >
> > >>> > > > > > On Tue, Mar 16,
> 2010
> > at 02:56:06PM
> > >>> -0700,
> > >>> > kishore
> > >>> > > kumar
> > >>> > > > wrote:
> > >>> > > > > > > Please
> find the
> > attached log
> > >>> file after
> > >>> > fixing
> > >>> > > the
> > >>> > > > dom 0
> > >>> > > > > kernel cmd
> > >>> > > > > > line
> > >>> > > > > > > as below
> > >>> > > > > > >
> > >>> > > > > > > ro
> > root=/dev/VolGroup01/LogVol00
> > >>> > console=hvc0
> > >>> > > > > earlyprintk=xen
> > >>> > > > > > nomodeset
> > >>> > > > > > >
> > >>> > > > > >
> > >>> > > > > > There's
> something
> > wrong with the log,
> > >>> the
> > >>> > dom0
> > >>> > > kernel
> > >>> > > > parts are
> > >>> > > > > all on
> > >>> > > > > > one line..
> > >>> > > > > > It's really
> difficult
> > to read it.
> > >>> > > > > >
> > >>> > > > > > -- Pasi
> > >>> > > > > >
> > >>> > > > > > > Thanks
> > >>> > > > > > >
> > >>> > > > > > >
> > >>> > > > > > > On Tue,
> Mar 16,
> > 2010 at 2:29 PM,
> > >>> Pasi
> > >>> > > Kärkkäinen
> > >>> > > > > >
> > <[1][2][3][4][5][6][7][8][10]pasik@xxxxxx>
> > >>> wrote:
> > >>> > > > > > >
> > >>> > > > > > > On Tue,
> Mar
> > 16, 2010 at
> > >>> 02:16:22PM
> > >>> > -0700,
> > >>> > > kishore
> > >>> > > > kumar
> > >>> > > > > wrote:
> > >>> > > > > > > > I
> did
> > below steps.
> > >>> > > > > > > >
> > >>> > > > > > > >
> > >>> > > > > > > >
> I
> > pulled DOM 0 kernel
> > >>> from
> > >>> > > > > > > >
> git
> > clone
> > >>> > > > > > >
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> git://[1][2][3][4][5][6][7][8][9][11]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > > > > > >
> > linux-2.6-xen
> > >>> > > > > > > >
> > >>> > > > > > > >
> cd
> > linux-2.6-xen
> > >>> > > > > > > >
> > >>> > > > > > > >
> make
> > clean
> > >>> > > > > > > >
> > >>> > > > > > > >
> cp -a
> > .config .config-old
> > >>> > > > > > > >
> > >>> > > > > > > >
> wget -O
> > .config
> > >>> > > > > > > >
> > >>> > > > > > >
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> [2][3][4][5][6][7][8][9][10][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > > > > > >
> > >>> > > > > > > >
> make
> > oldconfig
> > >>> > > > > > > >
> > >>> > > > > > > >
> make
> > bzImage
> > >>> > > > > > > >
> > >>> > > > > > > >
> make
> > modules
> > >>> > > > > > > >
> > >>> > > > > > > >
> make
> > modules_install
> > >>> > > > > > > >
> > >>> > > > > > > >
> cp -a
> > .config
> > >>> > /boot/config-2.6.32.9
> > >>> > > > > > > >
> > >>> > > > > > > >
> cp -a
> > System.map
> > >>> > > /boot/System.map-2.6.32.9
> > >>> > > > > > > >
> > >>> > > > > > > >
> cp -a
> > >>> arch/x86/boot/bzImage
> > >>> > > > /boot/vmlinuz-2.6.32.9
> > >>> > > > > > > >
> > >>> > > > > > > >
> and
> > modified the
> > >>> grub.conf as
> > >>> > below
> > >>> > > > > > > >
> > >>> > > > > > > >
> > >>> > > > > > > >
> > Root(hd0,0)
> > >>> > > > > > > >
> > >>> > > > > > > >
> kernel
> > /xen.gz
> > >>> console=vga,com1
> > >>> > > > com1=115200,8n1
> > >>> > > > > msi=1
> > >>> > > > > > iommu=1
> > >>> > > > > > > >
> > >>> > > > > > > >
> module
> > /vmlinuz-2.6.32.9
> > >>> ro
> > >>> > > > >
> root=/dev/VolGroup01/LogVo100
> > >>> > > > > > rhgb
> > >>> > > > > > > quiet
> > >>> > > > > > > >
> > >>> > > > > > > >
> module
> > >>> /initrd-2.6.32.9.img
> > >>> > > > > > > >
> > >>> > > > > > > >
> > >>> > > > > > > >
> and
> > rebooted the machine.
> > >>> Then
> > >>> > It
> > >>> > > booted with
> > >>> > > > some
> > >>> > > > > xen
> > >>> > > > > > messages
> > >>> > > > > > > and
> > >>> > > > > > > >
> stopped.
> > Those were the
> > >>> > messages
> > >>> > > captured
> > >>> > > > from
> > >>> > > > > serial
> > >>> > > > > > console.
> > >>> > > > > > > >
> > >>> > > > > > > >
> Please
> > let me know if I
> > >>> did
> > >>> > something
> > >>> > > wrong
> > >>> > > > here.
> > >>> > > > > > > >
> > >>> > > > > > >
> > >>> > > > > > > Please
> fix the
> > kernel cmdline
> > >>> based
> > >>> > on my
> > >>> > > earlier
> > >>> > > > email,
> > >>> > > > > and
> > >>> > > > > > capture and
> > >>> > > > > > > post
> the
> > >>> > > > > > > serial
> console
> > log again!
> > >>> > > > > > >
> > >>> > > > > > > -- Pasi
> > >>> > > > > > > >
> > >>> > > > > > > >
> > >>> > > > > > > >
> On Tue,
> > Mar 16, 2010 at
> > >>> 1:20 PM,
> > >>> > Pasi
> > >>> > > > Kärkkäinen
> > >>> > > > > > >
> > >>> <[3][4][5][6][7][8][9][10][11][13]pasik@xxxxxx>
> > >>> > wrote:
> > >>> > > > > > > >
> > >>> > > > > > > >
> On
> > Tue, Mar 16, 2010 at
> > >>> > 01:16:28PM
> > >>> > > -0700,
> > >>> > > > Jeremy
> > >>> > > > > > Fitzhardinge
> > >>> > > > > > > wrote:
> > >>> > > > > > > >
> > On
> > 03/16/2010 12:48
> > >>> PM, Pasi
> > >>> > > Kärkkäinen
> > >>> > > > wrote:
> > >>> > > > > > > >
> >> On
> > Tue, Mar 16, 2010
> > >>> at
> > >>> > 09:43:44PM
> > >>> > > +0200,
> > >>> > > > Pasi
> > >>> > > > > > Kärkkäinen
> > >>> > > > > > > wrote:
> > >>> > > > > > > >
> >>
> > >>> > > > > > > >
> >>>
> > On Tue, Mar 16,
> > >>> 2010 at
> > >>> > > 10:32:17AM
> > >>> > > > -0700,
> > >>> > > > > kishore
> > >>> > > > > > kumar
> > >>> > > > > > > wrote:
> > >>> > > > > > > >
> >>>
> > >>> > > > > > > >
> >>>>
> > Attached is
> > >>> the
> > >>> > output
> > >>> > > captured
> > >>> > > > from
> > >>> > > > > serial
> > >>> > > > > > console.
> > >>> > > > > > > >
> >>>>
> > >>> > > > > > > >
> >>>>
> > Machine does
> > >>> not boot
> > >>> > after
> > >>> > > > compiling xen
> > >>> > > > > 3.4.3
> > >>> > > > > > with
> > >>> > > > > > > pv_ops
> dom
> > >>> > > > > > > >
> 0
> > kernel.
> > >>> > > > > > > >
> >>>>
> > >>> > > > > > > >
> >>>>
> > Please let me
> > >>> know
> > >>> > what is
> > >>> > > going
> > >>> > > > wrong
> > >>> > > > > here.
> > >>> > > > > > > >
> >>>>
> > >>> > > > > > > >
> >>>>
> > >>> > > > > > > >
> >>>
> > Ok this looks like
> > >>> a bug
> > >>> > that is
> > >>> > > already
> > >>> > > > being
> > >>> > > > > sorted
> > >>> > > > > > out on
> > >>> > > > > > > >
> > xen-devel mailinglist.
> > >>> > > > > > > >
> >>> I
> > added CC to
> > >>> xen-devel.
> > >>> > > > > > > >
> >>>
> > >>> > > > > > > >
> >>>
> > >>> > > > > > > >
> >>
> > >>> > > > > > > >
> >
> > >>> > > > > > > >
> >
> > Those messages are
> > >>> not a
> > >>> > problem in
> > >>> > > > themselves,
> > >>> > > > > but the
> > >>> > > > > > related
> > >>> > > > > > > >
> > problem
> > >>> > > > > > > >
> > is
> > believed to be
> > >>> fixed in
> > >>> > current
> > >>> > > > > xen/stable-2.6.32.x.
> > >>> > > > > > It
> > >>> > > > > > > looks
> like
> > >>> > > > > > > >
> > the
> > output stops
> > >>> there
> > >>> > because the
> > >>> > > Xen
> > >>> > > > console
> > >>> > > > > isn't set
> > >>> > > > > > up
> > >>> > > > > > >
> properly
> > >>> > > > > > > >
> for
> > >>> > > > > > > >
> >
> > some reason.
> > >>> > > > > > > >
> >
> > >>> > > > > > > >
> > >>> > > > > > > >
> Yeah,
> > remove "rhgb
> > >>> quiet" from
> > >>> > the
> > >>> > > options..
> > >>> > > > the
> > >>> > > > > dom0
> > >>> > > > > > kernel
> > >>> > > > > > > cmdline
> > >>> > > > > > > >
> should
> > be like this:
> > >>> > > > > > > >
> ro
> > >>> > root=/dev/VolGroup01/LogVol00
> > >>> > > > console=hvc0
> > >>> > > > > > earlyprintk=xen
> > >>> > > > > > >
> nomodeset
> > >>> > > > > > > >
> --
> > Pasi
> > >>> > > > > > > >
> > >>> > > > > > > >
> References
> > >>> > > > > > > >
> > >>> > > > > > > >
> Visible
> > links
> > >>> > > > > > > >
> 1.
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> [5][6][7][8][9][10][11][12][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > > > > > >
> 2.
> > >>> > > > > > >
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> [6][7][8][9][10][11][12][13][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > > > > > >
> 3.
> > >>> >
> mailto:[7][8][9][10][11][12][13][14][16]pasik@xxxxxx
> > >>> > > > > > >
> > >>> > > > > > > References
> > >>> > > > > > >
> > >>> > > > > > > Visible
> links
> > >>> > > > > > > 1.
> > >>> >
> mailto:[9][10][11][12][13][14][15][17]pasik@xxxxxx
> > >>> > > > > > > 2.
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> [10][11][12][13][14][15][16][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > > > > > 3.
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> [11][12][13][14][15][16][17][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > > > > > 4.
> > >>> >
> mailto:[12][13][14][15][16][17][18][20]pasik@xxxxxx
> > >>> > > > > > > 5.
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> [13][14][15][16][17][18][19][21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > > > > > 6.
> > >>> > > > > >
> > >>> > > > >
> > >>> > > >
> > >>> > >
> > >>> >
> > >>>
> >
>
> [14][15][16][17][18][19][20][22]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > > > > > 7.
> > >>> >
> mailto:[15][16][17][18][19][20][21][23]pasik@xxxxxx
> > >>> > > > > > > Asserting
> Post
> > complete GPIO!!!
> > >>> > > > > > > Transfer
> control to
> > CSM 16-bit
> > >>> binary for
> > >>> > legacy
> > >>> > > boot
> > >>> > > > > > > __ __
> > _____ _ _
> > >>> _____
> > >>> > > _ _
> > >>> > > > > > > \ \/ /___ _
> __
> > |___ /| || |
> > >>> |___ /
> > >>> > _ __
> > >>> > > ___| || |
> > >>> > > > _
> > >>> > > > > __ _
> > >>> > > > > > __ ___
> > >>> > > > > > > \ // _ \
> '_ \
> > |_ \| || |_
> > >>> |_ \ __|
> > >>> > '__/
> > >>> > > __| ||
> > >>> > > > |_ __|
> > >>> > > > > '_ \|
> > >>> > > > > > '__/ _ \
> > >>> > > > > > > / \ __/
> | | |
> > ___) |__ _|
> > >>> ___) |__|
> > >>> > | |
> > >>> > > (__|__
> > >>> > > > _|__|
> > >>> > > > > |_) | |
> > >>> > > > > > | __/
> > >>> > > > > > >
> /_/\_\___|_| |_|
> > |____(_)
> > >>> |_|(_)____/
> > >>> > |_|
> > >>> > > \___| |_|
> > >>> > > > |
> > >>> > > > > .__/|_|
> > >>> > > > > > \___|
> > >>> > > > > > >
> > >>> > > > |_|
> > >>> > > > > > > (XEN) Xen
> version
> > 3.4.3-rc4-pre
> > >>> > > (kishore@localdomain)
> > >>> > > > (gcc
> > >>> > > > > version
> > >>> > > > > > 4.1.2 20080704
> (Red
> > Hat 4.1.2-46))
> > >>> Mon Mar
> > >>> > 15
> > >>> > > 13:44:31 PDT
> > >>> > > > 2010
> > >>> > > > > > > (XEN) Latest
> > ChangeSet: Tue Mar 09
> > >>> > 18:15:52 2010
> > >>> > > +0000
> > >>> > > > > >
> 19924:6e72f8c3c017
> > >>> > > > > > > (XEN)
> Command line:
> > >>> console=vga,com1
> > >>> > > com1=115200,8n1
> > >>> > > > msi=1
> > >>> > > > > iommu=1
> > >>> > > > > > > (XEN) Video
> > information:
> > >>> > > > > > > (XEN) VGA
> is text
> > mode 80x25, font
> > >>> 8x16
> > >>> > > > > > > (XEN)
> VBE/DDC
> > methods: none; EDID
> > >>> > transfer time:
> > >>> > > 0
> > >>> > > > seconds
> > >>> > > > > > > (XEN) EDID
> info
> > not retrieved
> > >>> because no
> > >>> > DDC
> > >>> > > retrieval
> > >>> > > > method
> > >>> > > > > > detected
> > >>> > > > > > > (XEN) Disc
> > information:
> > >>> > > > > > > (XEN) Found
> 1 MBR
> > signatures
> > >>> > > > > > > (XEN) Found
> 1 EDD
> > information
> > >>> structures
> > >>> > > > > > > (XEN)
> Xen-e820 RAM
> > map:
> > >>> > > > > > > (XEN)
> > 0000000000000000 -
> > >>> 000000000009d000
> > >>> > > (usable)
> > >>> > > > > > > (XEN)
> > 000000000009d000 -
> > >>> 00000000000a0000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 00000000000e0000 -
> > >>> 0000000000100000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 0000000000100000 -
> > >>> 000000006d597000
> > >>> > > (usable)
> > >>> > > > > > > (XEN)
> > 000000006d597000 -
> > >>> 000000006d686000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 000000006d686000 -
> > >>> 000000006f598000
> > >>> > > (usable)
> > >>> > > > > > > (XEN)
> > 000000006f598000 -
> > >>> 000000006f59a000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 000000006f59a000 -
> > >>> 000000006f5af000
> > >>> > (ACPI
> > >>> > > NVS)
> > >>> > > > > > > (XEN)
> > 000000006f5af000 -
> > >>> 000000006f5d9000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 000000006f5d9000 -
> > >>> 000000006f5f9000
> > >>> > (ACPI
> > >>> > > data)
> > >>> > > > > > > (XEN)
> > 000000006f5f9000 -
> > >>> 000000006f6df000
> > >>> > (ACPI
> > >>> > > NVS)
> > >>> > > > > > > (XEN)
> > 000000006f6df000 -
> > >>> 000000006f700000
> > >>> > (ACPI
> > >>> > > data)
> > >>> > > > > > > (XEN)
> > 000000006f700000 -
> > >>> 0000000080000000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 00000000a0000000 -
> > >>> 00000000b0000000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 00000000fc000000 -
> > >>> 00000000fd000000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 00000000fed1c000 -
> > >>> 00000000fed20000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN)
> > 00000000ffc00000 -
> > >>> 0000000100000000
> > >>> > > (reserved)
> > >>> > > > > > > (XEN) System
> RAM:
> > 1780MB
> > >>> (1823000kB)
> > >>> > > > > > > (XEN) ACPI:
> RSDP
> > 000F03F0, 0024 (r2
> > >>> INTEL
> > >>> > )
> > >>> > > > > > > (XEN) ACPI:
> XSDT
> > 6F6FE120, 0064 (r1
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 0
> > >>> > > > > > 1000013)
> > >>> > > > > > > (XEN) ACPI:
> FACP
> > 6F6FD000, 00F4 (r4
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 0
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) ACPI:
> DSDT
> > 6F6F5000, 74F1 (r2
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 3
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) ACPI:
> FACS
> > 6F5F9000, 0040
> > >>> > > > > > > (XEN) ACPI:
> APIC
> > 6F6F4000, 01CC (r2
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 0
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) ACPI:
> MCFG
> > 6F6F3000, 003C (r1
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 1
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) ACPI:
> HPET
> > 6F6F2000, 0038 (r1
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 1
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) ACPI:
> SLIT
> > 6F6F1000, 0030 (r1
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 1
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) ACPI:
> WDDT
> > 6F6F0000, 0040 (r1
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 0
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) ACPI:
> SSDT
> > 6F5D9000, 1FDDC
> > >>> (r1
> > >>> > INTEL SSDT
> > >>> > > PM
> > >>> > > > 4000
> > >>> > > > > INTL
> > >>> > > > > > 20061109)
> > >>> > > > > > > (XEN) ACPI:
> DMAR
> > 6F6EE000, 01D0 (r1
> > >>> INTEL
> > >>> > THRLY
> > >>> > > > 1
> > >>> > > > > MSFT
> > >>> > > > > > 100000D)
> > >>> > > > > > > (XEN) Domain
> heap
> > initialised
> > >>> > > > > > > (XEN)
> Processor #0
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #2
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #4
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #16
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #18
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #20
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #1
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #3
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #5
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #17
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #19
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> Processor #21
> > 6:12 APIC
> > >>> version 21
> > >>> > > > > > > (XEN)
> IOAPIC[0]:
> > apic_id 8, version
> > >>> 32,
> > >>> > address
> > >>> > > > 0xfec00000, GSI
> > >>> > > > > 0-23
> > >>> > > > > > > (XEN)
> IOAPIC[1]:
> > apic_id 9, version
> > >>> 32,
> > >>> > address
> > >>> > > > 0xfec90000, GSI
> > >>> > > > > 24-47
> > >>> > > > > > > (XEN)
> Enabling APIC
> > mode: Phys.
> > >>> Using 2
> > >>> > I/O
> > >>> > > APICs
> > >>> > > > > > > (XEN) Intel
> VT-d
> > DMAR tables have
> > >>> been
> > >>> > parsed.
> > >>> > > > > > > (XEN) Using
> > scheduler: SMP Credit
> > >>> > Scheduler
> > >>> > > (credit)
> > >>> > > > > > > (XEN)
> Detected
> > 3200.207 MHz
> > >>> processor.
> > >>> > > > > > > (XEN) VMX:
> > Supported advanced
> > >>> features:
> > >>> > > > > > > (XEN) -
> APIC MMIO
> > access
> > >>> virtualisation
> > >>> > > > > > > (XEN) -
> APIC TPR
> > shadow
> > >>> > > > > > > (XEN) -
> Extended
> > Page Tables (EPT)
> > >>> > > > > > > (XEN) -
> > Virtual-Processor
> > >>> Identifiers
> > >>> > (VPID)
> > >>> > > > > > > (XEN) -
> Virtual
> > NMI
> > >>> > > > > > > (XEN) - MSR
> > direct-access bitmap
> > >>> > > > > > > (XEN) VMX:
> EPT is
> > available.
> > >>> > > > > > > (XEN) VMX:
> VPID is
> > available.
> > >>> > > > > > > (XEN) HVM:
> VMX
> > enabled
> > >>> > > > > > > (XEN) HVM:
> Hardware
> > Assisted Paging
> > >>> > detected.
> > >>> > > > > > > (XEN) CPU0:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 1/2 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU1:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 2/4 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU2:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 3/16 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU3:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 4/18 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU4:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 5/20 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU5:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 6/1 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU6:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 7/3 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU7:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 8/5 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU8:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 9/17 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU9:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 10/19 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU10:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN)
> Booting
> > processor 11/21 eip
> > >>> 88000
> > >>> > > > > > > (XEN) CPU11:
> Intel
> > Genuine Intel(R)
> > >>> CPU
> > >>> > > 000
> > >>> > > > @
> > >>> > > > > 3.20GHz
> > >>> > > > > > stepping 00
> > >>> > > > > > > (XEN) Total
> of 12
> > processors
> > >>> activated.
> > >>> > > > > > > (XEN)
> ENABLING
> > IO-APIC IRQs
> > >>> > > > > > > (XEN) ->
> Using
> > new ACK method
> > >>> > > > > > > (XEN)
> checking TSC
> > synchronization
> > >>> across
> > >>> > 12
> > >>> > > CPUs:
> > >>> > > > passed.
> > >>> > > > > > > (XEN)
> Platform
> > timer is 14.318MHz
> > >>> HPET
> > >>> > > > > > > ?(XEN)
> Brought up
> > 12 CPUs
> > >>> > > > > > > (XEN) Intel
> VT-d
> > Snoop Control
> > >>> supported.
> > >>> > > > > > > (XEN) Intel
> VT-d
> > DMA Passthrough
> > >>> not
> > >>> > supported.
> > >>> > > > > > > (XEN) Intel
> VT-d
> > Queued
> > >>> Invalidation
> > >>> > supported.
> > >>> > > > > > > (XEN) Intel
> VT-d
> > Interrupt
> > >>> Remapping
> > >>> > supported.
> > >>> > > > > > > (XEN) I/O
> > virtualisation enabled
> > >>> > > > > > > (XEN) I/O
> > virtualisation for PV
> > >>> guests
> > >>> > disabled
> > >>> > > > > > > (XEN)
> xenoprof:
> > Initialization
> > >>> failed.
> > >>> > Intel
> > >>> > > processor
> > >>> > > > model 44
> > >>> > > > > for P6
> > >>> > > > > > class family is
> not
> > supported
> > >>> > > > > > > (XEN) ***
> LOADING
> > DOMAIN 0 ***
> > >>> > > > > > > (XEN) Xen
> kernel:
> > 64-bit, lsb,
> > >>> compat32
> > >>> > > > > > > (XEN) Dom0
> kernel:
> > 64-bit, PAE,
> > >>> lsb,
> > >>> > paddr
> > >>> > > 0x1000000 ->
> > >>> > > > > 0x26bb000
> > >>> > > > > > > (XEN)
> PHYSICAL
> > MEMORY ARRANGEMENT:
> > >>> > > > > > > (XEN) Dom0
> alloc.:
> > >>> > > 0000000064000000->0000000068000000
> > >>> > > > > (404490 pages
> > >>> > > > > > to be
> allocated)
> > >>> > > > > > > (XEN)
> VIRTUAL
> > MEMORY ARRANGEMENT:
> > >>> > > > > > > (XEN)
> Loaded
> > kernel:
> > >>> > > ffffffff81000000->ffffffff826bb000
> > >>> > > > > > > (XEN) Init.
> > ramdisk:
> > >>> > > ffffffff826bb000->ffffffff82d0d800
> > >>> > > > > > > (XEN)
> Phys-Mach
> > map:
> > >>> > > ffffffff82d0e000->ffffffff83044050
> > >>> > > > > > > (XEN) Start
> info:
> > >>> > > ffffffff83045000->ffffffff830454b4
> > >>> > > > > > > (XEN) Page
> tables:
> > >>> > > ffffffff83046000->ffffffff83063000
> > >>> > > > > > > (XEN) Boot
> stack:
> > >>> > > ffffffff83063000->ffffffff83064000
> > >>> > > > > > > (XEN)
> TOTAL:
> > >>> > > ffffffff80000000->ffffffff83400000
> > >>> > > > > > > (XEN) ENTRY
> > ADDRESS:
> > >>> ffffffff819c1200
> > >>> > > > > > > (XEN) Dom0
> has
> > maximum 12 VCPUs
> > >>> > > > > > > (XEN)
> Scrubbing
> > Free RAM: .done.
> > >>> > > > > > > (XEN) Xen
> trace
> > buffers: disabled
> > >>> > > > > > > (XEN) Std.
> > Loglevel: Errors and
> > >>> warnings
> > >>> > > > > > > (XEN) Guest
> > Loglevel: Nothing
> > >>> > (Rate-limited:
> > >>> > > Errors and
> > >>> > > > > warnings)
> > >>> > > > > > > (XEN) Xen is
> > relinquishing VGA
> > >>> console.
> > >>> > > > > > > (XEN) ***
> Serial
> > input -> DOM0
> > >>> (type
> > >>> > 'CTRL-a'
> > >>> > > three
> > >>> > > > times to
> > >>> > > > > switch
> > >>> > > > > > input to Xen)
> > >>> > > > > > > (XEN) Freed
> 128kB
> > init memory.
> > >>> > > > > > > mapping
> kernel into
> > physical memory
> > >>> > > > > > > Xen: setup
> ISA
> > identity maps
> > >>> > > > > > > about to get
> > started...
> > >>> > > > > > > Initializing
> cgroup
> > subsys cpuset
> > >>> > > > > > > Initializing
> cgroup
> > subsys cpu
> > >>> > > > > > > Linux
> version
> > 2.6.32.9
> > >>> > > (kishore@xxxxxxxxxxxxxxxxxxxxx)
> > >>> > > > (gcc
> > >>> > > > > version
> > >>> > > > > > 4.1.2 20080704
> (Red
> > Hat 4.1.2-46)) #1
> > >>> SMP
> > >>> > Mon Mar
> > >>> > > 15
> > >>> > > > 15:16:28 PDT
> > >>> > > > > 2010
> > >>> > > > > > > Command
> line: ro
> > >>> > root=/dev/VolGroup01/LogVol00
> > >>> > > > console=hvc0
> > >>> > > > > > earlyprintk=xen
> > nomodeset
> > >>> > > > > > > KERNEL
> supported
> > cpus:
> > >>> > > > > > > Intel
> > GenuineIntel
> > >>> > > > > > > AMD
> AuthenticAMD
> > >>> > > > > > > Centaur
> > CentaurHauls
> > >>> > > > > > >
> BIOS-provided
> > physical RAM map:
> > >>> > > > > > > Xen:
> > 0000000000000000 -
> > >>> 000000000009d000
> > >>> > > (usable)
> > >>> > > > > > > Xen:
> > 000000000009d000 -
> > >>> 0000000000100000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 0000000000100000 -
> > >>> 0000000066c0a000
> > >>> > > (usable)
> > >>> > > > > > > Xen:
> > 000000006d597000 -
> > >>> 000000006d686000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 000000006f598000 -
> > >>> 000000006f59a000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 000000006f59a000 -
> > >>> 000000006f5af000
> > >>> > (ACPI
> > >>> > > NVS)
> > >>> > > > > > > Xen:
> > 000000006f5af000 -
> > >>> 000000006f5d9000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 000000006f5d9000 -
> > >>> 000000006f5f9000
> > >>> > (ACPI
> > >>> > > data)
> > >>> > > > > > > Xen:
> > 000000006f5f9000 -
> > >>> 000000006f6df000
> > >>> > (ACPI
> > >>> > > NVS)
> > >>> > > > > > > Xen:
> > 000000006f6df000 -
> > >>> 000000006f700000
> > >>> > (ACPI
> > >>> > > data)
> > >>> > > > > > > Xen:
> > 000000006f700000 -
> > >>> 0000000080000000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 00000000a0000000 -
> > >>> 00000000b0000000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 00000000fc000000 -
> > >>> 00000000fd000000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 00000000fed1c000 -
> > >>> 00000000fed20000
> > >>> > > (reserved)
> > >>> > > > > > > Xen:
> > 00000000ffc00000 -
> > >>> 0000000100000000
> > >>> > > (reserved)
> > >>> > > > > > > bootconsole
> > [xenboot0] enabled
> > >>> > > > > > > DMI 2.4
> present.
> > >>> > > > > > > last_pfn =
> 0x66c0a
> > max_arch_pfn =
> > >>> > 0x400000000
> > >>> > > > > > >
> > init_memory_mapping:
> > >>> > > 0000000000000000-0000000066c0a000
> > >>> > > > > > > RAMDISK:
> 026bb000 -
> > 02d0d800
> > >>> > > > > > > ACPI: RSDP
> > 00000000000f03f0 00024
> > >>> (v02
> > >>> > INTEL )
> > >>> > > > > > > ACPI: XSDT
> > 000000006f6fe120 00064
> > >>> (v01
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000000
> > >>> > > > > > 01000013)
> > >>> > > > > > > ACPI: FACP
> > 000000006f6fd000 000F4
> > >>> (v04
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000000
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > ACPI: DSDT
> > 000000006f6f5000 074F1
> > >>> (v02
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000003
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > ACPI: FACS
> > 000000006f5f9000 00040
> > >>> > > > > > > ACPI: APIC
> > 000000006f6f4000 001CC
> > >>> (v02
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000000
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > ACPI: MCFG
> > 000000006f6f3000 0003C
> > >>> (v01
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000001
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > ACPI: HPET
> > 000000006f6f2000 00038
> > >>> (v01
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000001
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > ACPI: SLIT
> > 000000006f6f1000 00030
> > >>> (v01
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000001
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > ACPI: WDDT
> > 000000006f6f0000 00040
> > >>> (v01
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000000
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > ACPI: SSDT
> > 000000006f5d9000 1FDDC
> > >>> (v01
> > >>> > INTEL
> > >>> > > SSDT PM
> > >>> > > > 00004000
> > >>> > > > > INTL
> > >>> > > > > > 20061109)
> > >>> > > > > > > ACPI:
> > 000000006f6ee000 001D0
> > >>> (v01
> > >>> > INTEL
> > >>> > > THRLY
> > >>> > > > 00000001
> > >>> > > > > MSFT
> > >>> > > > > > 0100000D)
> > >>> > > > > > > No NUMA
> > configuration found
> > >>> > > > > > > Faking a
> node at
> > >>> > > 0000000000000000-0000000066c0a000
> > >>> > > > > > > Bootmem
> setup node
> > 0
> > >>> > > 0000000000000000-0000000066c0a000
> > >>> > > > > > > NODE_DATA
> > [0000000000008000 -
> > >>> > 000000000001ffff]
> > >>> > > > > > > bootmap
> > [0000000000020000 -
> > >>> > 000000000002cd87]
> > >>> > > pages d
> > >>> > > > > > > (9 early
> > reservations) ==> bootmem
> > >>> > [0000000000 -
> > >>> > > > 0066c0a000]
> > >>> > > > > > > #0
> [0000000000 -
> > 0000001000]
> > >>> BIOS data
> > >>> > page
> > >>> > > ==>
> > >>> > > > [0000000000
> > >>> > > > > -
> > >>> > > > > > 0000001000]
> > >>> > > > > > > #1
> [0003046000 -
> > 0003063000]
> > >>> XEN
> > >>> > PAGETABLES
> > >>> > > ==>
> > >>> > > > [0003046000
> > >>> > > > > -
> > >>> > > > > > 0003063000]
> > >>> > > > > > > #2
> [0000006000 -
> > 0000008000]
> > >>> > TRAMPOLINE
> > >>> > > ==>
> > >>> > > > [0000006000
> > >>> > > > > -
> > >>> > > > > > 0000008000]
> > >>> > > > > > > #3
> [0001000000 -
> > 000269ae98]
> > >>> TEXT
> > >>> > DATA BSS
> > >>> > > ==>
> > >>> > > > [0001000000
> > >>> > > > > -
> > >>> > > > > > 000269ae98]
> > >>> > > > > > > #4
> [00026bb000 -
> > 0002d0d800]
> > >>> > RAMDISK
> > >>> > > ==>
> > >>> > > > [00026bb000
> > >>> > > > > -
> > >>> > > > > > 0002d0d800]
> > >>> > > > > > > #5
> [0002d0e000 -
> > 0003046000]
> > >>> XEN START
> > >>> > INFO
> > >>> > > ==>
> > >>> > > > [0002d0e000
> > >>> > > > > -
> > >>> > > > > > 0003046000]
> > >>> > > > > > > #6
> [000269b000 -
> > 000269b011]
> > >>> > BRK
> > >>> > > ==>
> > >>> > > > [000269b000
> > >>> > > > > -
> > >>> > > > > > 000269b011]
> > >>> > > > > > > #7
> [0000100000 -
> > 000041a000]
> > >>> > PGTABLE
> > >>> > > ==>
> > >>> > > > [0000100000
> > >>> > > > > -
> > >>> > > > > > 000041a000]
> > >>> > > > > > > #8
> [0000001000 -
> > 0000001030]
> > >>> ACPI
> > >>> > SLIT
> > >>> > > ==>
> > >>> > > > [0000001000
> > >>> > > > > -
> > >>> > > > > > 0000001030]
> > >>> > > > > > > found SMP
> MP-table
> > at
> > >>> [ffff8800000fd750]
> > >>> > fd750
> > >>> > > > > > > Zone PFN
> ranges:
> > >>> > > > > > > DMA
> > 0x00000000 -> 0x00001000
> > >>> > > > > > > DMA32
> > 0x00001000 -> 0x00100000
> > >>> > > > > > > Normal
> > 0x00100000 -> 0x00100000
> > >>> > > > > > > Movable zone
> start
> > PFN for each
> > >>> node
> > >>> > > > > > >
> early_node_map[2]
> > active PFN ranges
> > >>> > > > > > > 0:
> 0x00000000
> > -> 0x0000009d
> > >>> > > > > > > 0:
> 0x00000100
> > -> 0x00066c0a
> > >>> > > > > > > ACPI:
> PM-Timer IO
> > Port: 0x408
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x00]
> > >>> lapic_id[0x00]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x01]
> > >>> lapic_id[0x02]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x02]
> > >>> lapic_id[0x04]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x03]
> > >>> lapic_id[0x10]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x04]
> > >>> lapic_id[0x12]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x05]
> > >>> lapic_id[0x14]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x06]
> > >>> lapic_id[0x01]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x07]
> > >>> lapic_id[0x03]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x08]
> > >>> lapic_id[0x05]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x09]
> > >>> lapic_id[0x11]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x0a]
> > >>> lapic_id[0x13]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x0b]
> > >>> lapic_id[0x15]
> > >>> > > enabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x0c]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x0d]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x0e]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x0f]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x10]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x11]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x12]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x13]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x14]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x15]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x16]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI: LAPIC
> > (acpi_id[0x17]
> > >>> lapic_id[0xff]
> > >>> > > disabled)
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x00] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x01] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x02] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x03] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x04] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x05] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x06] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x07] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x08] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x09] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x0a] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x0b] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x0c] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x0d] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x0e] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x0f] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x10] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x11] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x12] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x13] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x14] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x15] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x16] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI:
> LAPIC_NMI
> > (acpi_id[0x17] high
> > >>> level
> > >>> > > lint[0x1])
> > >>> > > > > > > ACPI: IOAPIC
> > (id[0x08]
> > >>> address[0xfec00000]
> > >>> > > gsi_base[0])
> > >>> > > > > > > IOAPIC[0]:
> apic_id
> > 8, version 0,
> > >>> address
> > >>> > > 0xfec00000, GSI
> > >>> > > > 0-0
> > >>> > > > > > > ACPI: IOAPIC
> > (id[0x09]
> > >>> address[0xfec90000]
> > >>> > > gsi_base[24])
> > >>> > > > > > > IOAPIC[1]:
> apic_id
> > 9, version 0,
> > >>> address
> > >>> > > 0xfec90000, GSI
> > >>> > > > 24-24
> > >>> > > > > > > ACPI:
> INT_SRC_OVR
> > (bus 0 bus_irq 0
> > >>> > global_irq 2
> > >>> > > dfl dfl)
> > >>> > > > > > > ERROR:
> Unable to
> > locate IOAPIC for
> > >>> GSI 2
> > >>> > > > > > > ACPI:
> INT_SRC_OVR
> > (bus 0 bus_irq 9
> > >>> > global_irq 9
> > >>> > > high
> > >>> > > > level)
> > >>> > > > > > > ERROR:
> Unable to
> > locate IOAPIC for
> > >>> GSI 9
> > >>> > > > > > > Using ACPI
> (MADT)
> > for SMP
> > >>> configuration
> > >>> > > information
> > >>> > > > > > > ACPI: HPET
> id:
> > 0x8086a401 base:
> > >>> 0xfed00000
> > >>> > > > > > > SMP:
> Allowing 12
> > CPUs, 0 hotplug
> > >>> CPUs
> > >>> > > > > > > PM:
> Registered
> > nosave memory:
> > >>> > 000000000009d000 -
> > >>> > > > > 0000000000100000
> > >>> > > > > > > Allocating
> PCI
> > resources starting
> > >>> at
> > >>> > b0000000
> > >>> > > (gap:
> > >>> > > > > b0000000:4c000000)
> > >>> > > > > > > Booting
> > paravirtualized kernel on
> > >>> Xen
> > >>> > > > > > > Xen version:
> > 3.4.3-rc4-pre
> > >>> (preserve-AD)
> > >>> > (dom0)
> > >>> > > > > > > NR_CPUS:512
> > nr_cpumask_bits:512
> > >>> > nr_cpu_ids:12
> > >>> > > > nr_node_ids:1
> > >>> > > > > > > PERCPU:
> Embedded
> > 478 pages/cpu
> > >>> > @ffff880005ebc000
> > >>> > > > s1928024 r8192
> > >>> > > > > d21672
> > >>> > > > > > u1957888
> > >>> > > > > > > pcpu-alloc:
> > s1928024 r8192 d21672
> > >>> u1957888
> > >>> > > > alloc=478*4096
> > >>> > > > > > > pcpu-alloc:
> [0] 00
> > [0] 01 [0] 02
> > >>> [0] 03
> > >>> > [0] 04
> > >>> > > [0] 05
> > >>> > > > [0] 06
> > >>> > > > > [0] 07
> > >>> > > > > > > pcpu-alloc:
> [0] 08
> > [0] 09 [0] 10
> > >>> [0] 11
> > >>> > > > > > > Xen: using
> > vcpu_info placement
> > >>> > > > > > > Built 1
> zonelists
> > in Node order,
> > >>> mobility
> > >>> > > grouping on.
> > >>> > > > Total
> > >>> > > > > pages:
> > >>> > > > > > 409291
> > >>> > > > > > > Policy zone:
> DMA32
> > >>> > > > > > > Kernel
> command
> > line: ro
> > >>> > > root=/dev/VolGroup01/LogVol00
> > >>> > > > > console=hvc0
> > >>> > > > > > earlyprintk=xen
> > nomodeset
> > >>> > > > > > > PID hash
> table
> > entries: 4096
> > >>> (order: 3,
> > >>> > 32768
> > >>> > > bytes)
> > >>> > > > > > > Initializing
> CPU#0
> > >>> > > > > > > DMA: Placing
> 64MB
> > software IO TLB
> > >>> between
> > >>> > > > ffff880007525000 -
> > >>> > > > > >
> ffff88000b525000
> > >>> > > > > > > DMA:
> software IO
> > TLB at phys
> > >>> 0x7525000 -
> > >>> > > 0xb525000
> > >>> > > > > > >
> xen_swiotlb_fixup:
> > >>> buf=ffff880007525000
> > >>> > > size=67108864
> > >>> > > > > > >
> xen_swiotlb_fixup:
> > >>> buf=ffff88000b585000
> > >>> > > size=32768
> > >>> > > > > > > Memory:
> > 1514268k/1683496k available
> > >>> (4654k
> > >>> > kernel
> > >>> > > code,
> > >>> > > > 396k
> > >>> > > > > absent,
> > >>> > > > > > 168832k
> reserved,
> > 3443k data, 3396k
> > >>> init)
> > >>> > > > > > > SLUB:
> Genslabs=14,
> > HWalign=64,
> > >>> Order=0-3,
> > >>> > > MinObjects=0,
> > >>> > > > > CPUs=12,
> > >>> > > > > > Nodes=1
> > >>> > > > > > > Hierarchical
> RCU
> > implementation.
> > >>> > > > > > > NR_IRQS:4352
> > nr_irqs:3072
> > >>> > > > > > > Already
> setup the
> > GSI :0
> > >>> > > > > > > Already
> setup the
> > GSI :1
> > >>> > > > > > > Already
> setup the
> > GSI :2
> > >>> > > > > > > Already
> setup the
> > GSI :3
> > >>> > > > > > > Already
> setup the
> > GSI :4
> > >>> > > > > > > Already
> setup the
> > GSI :5
> > >>> > > > > > > Already
> setup the
> > GSI :6
> > >>> > > > > > > Already
> setup the
> > GSI :7
> > >>> > > > > > > Already
> setup the
> > GSI :8
> > >>> > > > > > > Already
> setup the
> > GSI :9
> > >>> > > > > > > Already
> setup the
> > GSI :10
> > >>> > > > > > > Already
> setup the
> > GSI :11
> > >>> > > > > > > Already
> setup the
> > GSI :12
> > >>> > > > > > > Already
> setup the
> > GSI :13
> > >>> > > > > > > Already
> setup the
> > GSI :14
> > >>> > > > > > > Already
> setup the
> > GSI :15
> > >>> > > > > > > ACPI:
> INT_SRC_OVR
> > (bus 0 bus_irq 0
> > >>> > global_irq 2
> > >>> > > dfl dfl)
> > >>> > > > > > > ACPI:
> INT_SRC_OVR
> > (bus 0 bus_irq 9
> > >>> > global_irq 9
> > >>> > > high
> > >>> > > > level)
> > >>> > > > > > > xen: sci
> override:
> > source_irq=9
> > >>> > global_irq=9
> > >>> > > trigger=c
> > >>> > > > > polarity=1
> > >>> > > > > > >
> xen_allocate_pirq:
> > returning irq 9
> > >>> for gsi
> > >>> > 9
> > >>> > > > > > > Already
> setup the
> > GSI :9
> > >>> > > > > > > xen: acpi
> sci 9
> > >>> > > > > > > Console:
> colour
> > VGA+ 80x25
> > >>> > > > > > > console
> [hvc0]
> > enabled, bootconsole
> > >>> > disabled
> > >>> > > console
> > >>> > > > [hvc0]
> > >>> > > > > enabled,
> > >>> > > > > > bootconsole
> disabled
> > >>> > > > > > > Lock
> dependency
> > validator:
> > >>> Copyright (c)
> > >>> > 2006 Red
> > >>> > > Hat,
> > >>> > > > Inc.,
> > >>> > > > > Ingo
> > >>> > > > > > Molnar ...
> > MAX_LOCKDEP_SUBCLASSES: 8
> > >>> ...
> > >>> > > MAX_LOCK_DEPTH:
> > >>> > > > > 48
> > >>> > > > > > ...
> MAX_LOCKDEP_KEYS:
> > 8191 ...
> > >>> > > CLASSHASH_SIZE:
> > >>> > > > > 4096 ...
> > >>> > > > > >
> MAX_LOCKDEP_ENTRIES:
> > 16384 ...
> > >>> > > MAX_LOCKDEP_CHAINS:
> > >>> > > > 32768
> > >>> > > > > ...
> > >>> > > > > > CHAINHASH_SIZE:
> > 16384
> > >>> memory used
> > >>> > by lock
> > >>> > > > dependency
> > >>> > > > > info:
> > >>> > > > > > 6367 kB per
> > task-struct memory
> > >>> footprint:
> > >>> > 2688
> > >>> > > bytes
> > >>> > > > allocated
> > >>> > > > > 17039360
> > >>> > > > > > bytes of
> page_cgroup
> > please try
> > >>> > > 'cgroup_disable=memory'
> > >>> > > > option if
> > >>> > > > > you
> > >>> > > > > > don't want
> memory
> > cgroups installing
> > >>> Xen
> > >>> > timer for
> > >>> > > CPU 0
> > >>> > > > Detected
> > >>> > > > > > 3200.206 MHz
> > processor. Calibrating
> > >>> delay
> > >>> > loop
> > >>> > > (skipped),
> > >>> > > > value
> > >>> > > > > > calculated
> using timer
> > frequency..
> > >>> 6400.41
> > >>> > BogoMIPS
> > >>> > > > (lpj=3200206)
> > >>> > > > > > Security
> Framework
> > initialized
> > >>> SELinux:
> > >>> > > Initializing.
> > >>> > > > Dentry
> > >>> > > > > cache hash
> > >>> > > > > > table entries:
> 262144
> > (order: 9,
> > >>> 2097152
> > >>> > bytes)
> > >>> > > > Inode-cache hash
> > >>> > > > > table
> > >>> > > > > > entries: 131072
> > (order: 8, 1048576
> > >>> bytes)
> > >>> > > Mount-cache hash
> > >>> > > > table
> > >>> > > > > > entries: 256
> > Initializing cgroup
> > >>> subsys ns
> > >>> > > Initializing
> > >>> > > > cgroup
> > >>> > > > > subsys
> > >>> > > > > > cpuacct
> Initializing
> > cgroup subsys
> > >>> memory
> > >>> > > Initializing
> > >>> > > > cgroup
> > >>> > > > > subsys
> > >>> > > > > > devices
> Initializing
> > cgroup subsys
> > >>> freezer
> > >>> > > Initializing
> > >>> > > > cgroup
> > >>> > > > > subsys
> > >>> > > > > > net_cls CPU: L1
> I
> > cache: 32K, L1 D
> > >>> cache:
> > >>> > 32K CPU:
> > >>> > > L2
> > >>> > > > cache: 256K
> > >>> > > > > CPU:
> > >>> > > > > > L3 cache:
> 12288K CPU
> > 0/0x0 -> Node 0
> > >>> CPU:
> > >>> > > Unsupported
> > >>> > > > number of
> > >>> > > > > siblings
> > >>> > > > > > 32 Performance
> Events:
> > unsupported p6
> > >>> CPU
> > >>> > model 44
> > >>> > > no PMU
> > >>> > > > driver,
> > >>> > > > > > software events
> only.
> > lockdep: fixing
> > >>> up
> > >>> > > alternatives. SMP
> > >>> > > > > alternatives:
> > >>> > > > > > switching to UP
> code
> > ACPI: Core
> > >>> revision
> > >>> > 20090903
> > >>> > > ftrace:
> > >>> > > > > converting
> > >>> > > > > > mcount calls to
> 0f 1f
> > 44 00 00
> > >>> ftrace:
> > >>> > allocating
> > >>> > > 27971
> > >>> > > > entries
> > >>> > > > > in 110
> > >>> > > > > > pages
> installing Xen
> > timer for CPU 1
> > >>> > lockdep:
> > >>> > > fixing up
> > >>> > > > > alternatives.
> > >>> > > > > > SMP
> alternatives:
> > switching to SMP
> > >>> code
> > >>> > > Initializing CPU#1
> > >>> > > > CPU:
> > >>> > > > > L1 I
> > >>> > > > > > cache: 32K, L1
> D
> > cache: 32K CPU: L2
> > >>> cache:
> > >>> > 256K
> > >>> > > CPU: L3
> > >>> > > > cache:
> > >>> > > > > 12288K
> > >>> > > > > > CPU 1/0x0 ->
> Node 0
> > CPU: Unsupported
> > >>> number
> > >>> > of
> > >>> > > siblings 32
> > >>> > > > > installing
> > >>> > > > > > Xen timer for
> CPU 2
> > Initializing
> > >>> CPU#2 CPU:
> > >>> > L1 I
> > >>> > > cache:
> > >>> > > > 32K, L1 D
> > >>> > > > > cache:
> > >>> > > > > > 32K CPU: L2
> cache:
> > 256K CPU: L3
> > >>> cache:
> > >>> > 12288K CPU
> > >>> > > 2/0x0 ->
> > >>> > > > Node 0
> > >>> > > > > CPU:
> > >>> > > > > > Unsupported
> number of
> > siblings 32
> > >>> installing
> > >>> > Xen
> > >>> > > timer for
> > >>> > > > CPU 3
> > >>> > > > > > Initializing
> CPU#3
> > CPU: L1 I cache:
> > >>> 32K, L1
> > >>> > D
> > >>> > > cache: 32K
> > >>> > > > CPU: L2
> > >>> > > > > cache:
> > >>> > > > > > 256K CPU: L3
> cache:
> > 12288K CPU 3/0x0
> > >>> -> Node
> > >>> > 0 CPU:
> > >>> > > > Unsupported
> > >>> > > > > number
> > >>> > > > > > of siblings 32
> > installing Xen timer
> > >>> for CPU
> > >>> > 4
> > >>> > > Initializing
> > >>> > > > CPU#4
> > >>> > > > > CPU: L1
> > >>> > > > > > I cache: 32K,
> L1 D
> > cache: 32K CPU: L2
> > >>> cache:
> > >>> > 256K
> > >>> > > CPU: L3
> > >>> > > > cache:
> > >>> > > > > 12288K
> > >>> > > > > > CPU 4/0x0 ->
> Node 0
> > CPU: Unsupported
> > >>> number
> > >>> > of
> > >>> > > siblings 32
> > >>> > > > > installing
> > >>> > > > > > Xen timer for
> CPU 5
> > Initializing
> > >>> CPU#5 CPU:
> > >>> > L1 I
> > >>> > > cache:
> > >>> > > > 32K, L1 D
> > >>> > > > > cache:
> > >>> > > > > > 32K CPU: L2
> cache:
> > 256K CPU: L3
> > >>> cache:
> > >>> > 12288K CPU
> > >>> > > 5/0x0 ->
> > >>> > > > Node 0
> > >>> > > > > CPU:
> > >>> > > > > > Unsupported
> number of
> > siblings 32
> > >>> installing
> > >>> > Xen
> > >>> > > timer for
> > >>> > > > CPU 6
> > >>> > > > > > Initializing
> CPU#6
> > CPU: L1 I cache:
> > >>> 32K, L1
> > >>> > D
> > >>> > > cache: 32K
> > >>> > > > CPU: L2
> > >>> > > > > cache:
> > >>> > > > > > 256K CPU: L3
> cache:
> > 12288K CPU 6/0x0
> > >>> -> Node
> > >>> > 0 CPU:
> > >>> > > > Unsupported
> > >>> > > > > number
> > >>> > > > > > of siblings 32
> > installing Xen timer
> > >>> for CPU
> > >>> > 7
> > >>> > > Initializing
> > >>> > > > CPU#7
> > >>> > > > > CPU: L1
> > >>> > > > > > I cache: 32K,
> L1 D
> > cache: 32K CPU: L2
> > >>> cache:
> > >>> > 256K
> > >>> > > CPU: L3
> > >>> > > > cache:
> > >>> > > > > 12288K
> > >>> > > > > > CPU 7/0x0 ->
> Node 0
> > CPU: Unsupported
> > >>> number
> > >>> > of
> > >>> > > siblings 32
> > >>> > > > > installing
> > >>> > > > > > Xen timer for
> CPU 8
> > Initializing
> > >>> CPU#8 CPU:
> > >>> > L1 I
> > >>> > > cache:
> > >>> > > > 32K, L1 D
> > >>> > > > > cache:
> > >>> > > > > > 32K CPU: L2
> cache:
> > 256K CPU: L3
> > >>> cache:
> > >>> > 12288K CPU
> > >>> > > 8/0x0 ->
> > >>> > > > Node 0
> > >>> > > > > CPU:
> > >>> > > > > > Unsupported
> number of
> > siblings 32
> > >>> installing
> > >>> > Xen
> > >>> > > timer for
> > >>> > > > CPU 9
> > >>> > > > > > Initializing
> CPU#9
> > CPU: L1 I cache:
> > >>> 32K, L1
> > >>> > D
> > >>> > > cache: 32K
> > >>> > > > CPU: L2
> > >>> > > > > cache:
> > >>> > > > > > 256K CPU: L3
> cache:
> > 12288K CPU 9/0x0
> > >>> -> Node
> > >>> > 0 CPU:
> > >>> > > > Unsupported
> > >>> > > > > number
> > >>> > > > > > of siblings 32
> > installing Xen timer
> > >>> for CPU
> > >>> > 10
> > >>> > > > Initializing
> > >>> > > > > CPU#10 CPU:
> > >>> > > > > > L1 I cache:
> 32K, L1 D
> > cache: 32K CPU:
> > >>> L2
> > >>> > cache:
> > >>> > > 256K CPU:
> > >>> > > > L3
> > >>> > > > > cache:
> > >>> > > > > > 12288K CPU
> 10/0x0 ->
> > Node 0 CPU:
> > >>> Unsupported
> > >>> > number
> > >>> > > of
> > >>> > > > siblings
> > >>> > > > > 32
> > >>> > > > > > installing Xen
> timer
> > for CPU 11
> > >>> Initializing
> > >>> > CPU#11
> > >>> > > CPU:
> > >>> > > > L1 I
> > >>> > > > > cache:
> > >>> > > > > > 32K, L1 D
> cache: 32K
> > CPU: L2 cache:
> > >>> 256K
> > >>> > CPU: L3
> > >>> > > cache:
> > >>> > > > 12288K
> > >>> > > > > CPU
> > >>> > > > > > 11/0x0 -> Node
> 0 CPU:
> > Unsupported
> > >>> number of
> > >>> > > siblings 32
> > >>> > > > Brought
> > >>> > > > > up 12
> > >>> > > > > > CPUs Grant
> table
> > initialized
> > >>> regulator: core
> > >>> > > version 0.5
> > >>> > > > Time:
> > >>> > > > > 14:45:00
> > >>> > > > > > Date: 03/16/10
> NET:
> > Registered
> > >>> protocol
> > >>> > family 16
> > >>> > > > > xenbus_probe_init ok
> > >>> > > > > > ACPI FADT
> declares the
> > system doesn't
> > >>> > support PCIe
> > >>> > > ASPM,
> > >>> > > > so
> > >>> > > > > disable it
> > >>> > > > > > ACPI: bus type
> pci
> > registered PCI:
> > >>> MCFG
> > >>> > > configuration 0:
> > >>> > > > base
> > >>> > > > > a0000000
> > >>> > > > > > segment 0 buses
> 0 -
> > 255 PCI: MCFG
> > >>> area at
> > >>> > a0000000
> > >>> > > > reserved in
> > >>> > > > > E820 PCI:
> > >>> > > > > > Using MMCONFIG
> at
> > a0000000 - afffffff
> > >>> PCI:
> > >>> > Using
> > >>> > > > configuration
> > >>> > > > > type 1
> > >>> > > > > > for base access
> bio:
> > create slab
> > >>> <bio-0> at
> > >>> > 0 ACPI
> > >>> > > Error:
> > >>> > > > Field
> > >>> > > > > [CPB3]
> > >>> > > > > > at 96 exceeds
> Buffer
> > [NULL] size 64
> > >>> (bits)
> > >>> > > > > (20090903/dsopcode-596)
> ACPI
> > >>> > > > > > Error
> (psparse-0537):
> > Method
> > >>> parse/execution
> > >>> > failed
> > >>> > > > [\_SB_._OSC]
> > >>> > > > > (Node
> > >>> > > > > >
> ffff880064e00c98),
> > >>> AE_AML_BUFFER_LIMIT ACPI:
> > >>> > > Interpreter
> > >>> > > > enabled
> > >>> > > > > ACPI:
> > >>> > > > > > (supports S0 S1
> S3 S4
> > S5) ACPI: Using
> > >>> IOAPIC
> > >>> > for
> > >>> > > interrupt
> > >>> > > > > routing ACPI
> > >>> > > > > > Warning:
> Incorrect
> > checksum in table
> > >>> [ ]
> > >>> > - 97,
> > >>> > > should
> > >>> > > > be DB
> > >>> > > > > >
> (20090903/tbutils-314)
> > ACPI: No dock
> > >>> devices
> > >>> > found.
> > >>> > > ACPI:
> > >>> > > > PCI
> > >>> > > > > Root
> > >>> > > > > > Bridge [PCI0]
> > (0000:00) pci
> > >>> 0000:00:01.0:
> > >>> > PME#
> > >>> > > supported
> > >>> > > > from D0
> > >>> > > > > D3hot
> > >>> > > > > > D3cold pci
> > 0000:00:01.0: PME#
> > >>> disabled pci
> > >>> > > 0000:00:02.0:
> > >>> > > > PME#
> > >>> > > > > supported
> > >>> > > > > > from D0 D3hot
> D3cold
> > pci
> > >>> 0000:00:02.0: PME#
> > >>> > > disabled pci
> > >>> > > > > 0000:00:03.0:
> > >>> > > > > > PME# supported
> from D0
> > D3hot D3cold
> > >>> pci
> > >>> > > 0000:00:03.0: PME#
> > >>> > > > > disabled pci
> > >>> > > > > > 0000:00:04.0:
> PME#
> > supported from D0
> > >>> D3hot
> > >>> > D3cold
> > >>> > > pci
> > >>> > > > > 0000:00:04.0: PME#
> > >>> > > > > > disabled pci
> > 0000:00:05.0: PME#
> > >>> supported
> > >>> > from D0
> > >>> > > D3hot
> > >>> > > > D3cold
> > >>> > > > > pci
> > >>> > > > > > 0000:00:05.0:
> PME#
> > disabled pci
> > >>> > 0000:00:06.0: PME#
> > >>> > > > supported from
> > >>> > > > > D0
> > >>> > > > > > D3hot D3cold
> pci
> > 0000:00:06.0: PME#
> > >>> disabled
> > >>> > pci
> > >>> > > > 0000:00:07.0:
> > >>> > > > > PME#
> > >>> > > > > > supported from
> D0
> > D3hot D3cold pci
> > >>> > 0000:00:07.0:
> > >>> > > PME#
> > >>> > > > disabled
> > >>> > > > > pci
> > >>> > > > > > 0000:00:08.0:
> PME#
> > supported from D0
> > >>> D3hot
> > >>> > D3cold
> > >>> > > pci
> > >>> > > > > 0000:00:08.0: PME#
> > >>> > > > > > disabled pci
> > 0000:00:09.0: PME#
> > >>> supported
> > >>> > from D0
> > >>> > > D3hot
> > >>> > > > D3cold
> > >>> > > > > pci
> > >>> > > > > > 0000:00:09.0:
> PME#
> > disabled pci
> > >>> > 0000:00:0a.0: PME#
> > >>> > > > supported from
> > >>> > > > > D0
> > >>> > > > > > D3hot D3cold
> pci
> > 0000:00:0a.0: PME#
> > >>> disabled
> > >>> > pci
> > >>> > > > 0000:00:13.0:
> > >>> > > > > PME#
> > >>> > > > > > supported from
> D0
> > D3hot D3cold pci
> > >>> > 0000:00:13.0:
> > >>> > > PME#
> > >>> > > > disabled
> > >>> > > > > pci
> > >>> > > > > > 0000:00:1a.7:
> PME#
> > supported from D0
> > >>> D3hot
> > >>> > D3cold
> > >>> > > pci
> > >>> > > > > 0000:00:1a.7: PME#
> > >>> > > > > > disabled pci
> > 0000:00:1c.0: PME#
> > >>> supported
> > >>> > from D0
> > >>> > > D3hot
> > >>> > > > D3cold
> > >>> > > > > pci
> > >>> > > > > > 0000:00:1c.0:
> PME#
> > disabled pci
> > >>> > 0000:00:1c.4: PME#
> > >>> > > > supported from
> > >>> > > > > D0
> > >>> > > > > > D3hot D3cold
> pci
> > 0000:00:1c.4: PME#
> > >>> disabled
> > >>> > pci
> > >>> > > > 0000:00:1c.5:
> > >>> > > > > PME#
> > >>> > > > > > supported from
> D0
> > D3hot D3cold pci
> > >>> > 0000:00:1c.5:
> > >>> > > PME#
> > >>> > > > disabled
> > >>> > > > > pci
> > >>> > > > > > 0000:00:1d.7:
> PME#
> > supported from D0
> > >>> D3hot
> > >>> > D3cold
> > >>> > > pci
> > >>> > > > > 0000:00:1d.7: PME#
> > >>> > > > > > disabled pci
> > 0000:00:1f.0: quirk:
> > >>> region
> > >>> > 0400-047f
> > >>> > > claimed
> > >>> > > > by
> > >>> > > > > ICH6
> > >>> > > > > > ACPI/GPIO/TCO
> pci
> > 0000:00:1f.0:
> > >>> quirk:
> > >>> > region
> > >>> > > 0500-053f
> > >>> > > > claimed
> > >>> > > > > by ICH6
> > >>> > > > > > GPIO pci
> 0000:00:1f.0:
> > ICH7 LPC
> > >>> Generic IO
> > >>> > decode 1
> > >>> > > PIO at
> > >>> > > > 0680
> > >>> > > > > (mask
> > >>> > > > > > 000f) pci
> > 0000:00:1f.0: ICH7 LPC
> > >>> Generic IO
> > >>> > decode
> > >>> > > 2 PIO
> > >>> > > > at 0ca0
> > >>> > > > > (mask
> > >>> > > > > > 000f) pci
> > 0000:00:1f.0: ICH7 LPC
> > >>> Generic IO
> > >>> > decode
> > >>> > > 3 PIO
> > >>> > > > at 0600
> > >>> > > > > (mask
> > >>> > > > > > 001f) pci
> > 0000:00:1f.2: PME#
> > >>> supported from
> > >>> > D3hot
> > >>> > > pci
> > >>> > > > > 0000:00:1f.2: PME#
> > >>> > > > > > disabled pci
> > 0000:01:00.0: PME#
> > >>> supported
> > >>> > from D0
> > >>> > > D3hot
> > >>> > > > D3cold
> > >>> > > > > pci
> > >>> > > > > > 0000:01:00.0:
> PME#
> > disabled pci
> > >>> > 0000:01:00.1: PME#
> > >>> > > > supported from
> > >>> > > > > D0
> > >>> > > > > > D3hot D3cold
> pci
> > 0000:01:00.1: PME#
> > >>> disabled
> > >>> > pci
> > >>> > > > 0000:0c:00.0:
> > >>> > > > > disabling
> > >>> > > > > > ASPM on pre-1.1
> PCIe
> > device. You can
> > >>> enable
> > >>> > it
> > >>> > > with
> > >>> > > > > 'pcie_aspm=force'
> > >>> > > > > > pci
> 0000:00:1e.0:
> > transparent bridge
> > >>> ACPI:
> > >>> > PCI Root
> > >>> > > Bridge
> > >>> > > > [PCI1]
> > >>> > > > > > (0000:fe) ACPI:
> PCI
> > Root Bridge
> > >>> [PCI2]
> > >>> > (0000:ff)
> > >>> > > ACPI: PCI
> > >>> > > > > Interrupt
> > >>> > > > > > Link [LNKA]
> (IRQs 3 4
> > 5 6 7 9 10 *11
> > >>> 12 14
> > >>> > 15)
> > >>> > > ACPI: PCI
> > >>> > > > > Interrupt Link
> > >>> > > > > > [LNKB] (IRQs 3
> 4 5 6 7
> > 9 *10 11 12 14
> > >>> 15)
> > >>> > ACPI: PCI
> > >>> > > > Interrupt
> > >>> > > > > Link
> > >>> > > > > > [LNKC] (IRQs 3
> 4 5 6 7
> > *9 10 11 12 14
> > >>> 15)
> > >>> > ACPI: PCI
> > >>> > > > Interrupt
> > >>> > > > > Link
> > >>> > > > > > [LNKD] (IRQs 3
> 4 *5 6
> > 7 9 10 11 12 14
> > >>> 15)
> > >>> > ACPI: PCI
> > >>> > > > Interrupt
> > >>> > > > > Link
> > >>> > > > > > [LNKE] (IRQs 3
> 4 5 6 7
> > 9 10 11 12 14
> > >>> 15) *0,
> > >>> > > disabled.
> > >>> > > > ACPI: PCI
> > >>> > > > > > Interrupt Link
> [LNKF]
> > (IRQs 3 4 5 6 7
> > >>> 9 10
> > >>> > *11 12
> > >>> > > 14 15)
> > >>> > > > ACPI:
> > >>> > > > > PCI
> > >>> > > > > > Interrupt Link
> [LNKG]
> > (IRQs 3 4 5 6 7
> > >>> 9 10
> > >>> > 11 12 14
> > >>> > > 15)
> > >>> > > > *0,
> > >>> > > > > disabled.
> > >>> > > > > > ACPI: PCI
> Interrupt
> > Link [LNKH] (IRQs
> > >>> 3 4 5
> > >>> > 6 7 9
> > >>> > > *10 11
> > >>> > > > 12 14
> > >>> > > > > 15)
> > >>> > > > > >
> > xenbus_probe_backend_init bus
> > >>> registered ok
> > >>> > > > >
> xenbus_probe_frontend_init
> > >>> > > > > > bus registered
> ok
> > xen_balloon:
> > >>> Initialising
> > >>> > balloon
> > >>> > > driver
> > >>> > > > with
> > >>> > > > > page
> > >>> > > > > > order 0.
> vgaarb:
> > device added:
> > >>> > > > > >
> > >>> > >
> > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
> > >>> > > > vgaarb:
> > >>> > > > > loaded
> > >>> > > > > > SCSI subsystem
> > initialized usbcore:
> > >>> > registered new
> > >>> > > > interface
> > >>> > > > > driver
> > >>> > > > > > usbfs usbcore:
> > registered new
> > >>> interface
> > >>> > driver hub
> > >>> > > > usbcore:
> > >>> > > > > registered
> > >>> > > > > > new device
> driver usb
> > PCI: Using ACPI
> > >>> for
> > >>> > IRQ
> > >>> > > routing
> > >>> > > > NetLabel:
> > >>> > > > > > Initializing
> NetLabel:
> > domain hash
> > >>> size =
> > >>> > 128
> > >>> > > NetLabel:
> > >>> > > > > protocols =
> > >>> > > > > > UNLABELED
> CIPSOv4
> > NetLabel:
> > >>> unlabeled
> > >>> > traffic
> > >>> > > allowed by
> > >>> > > > default
> > >>> > > > > > Switching to
> > clocksource xen kstop/0
> > >>> used
> > >>> > greatest
> > >>> > > stack
> > >>> > > > depth:
> > >>> > > > > 6568
> > >>> > > > > > bytes left
> kstop/1
> > used greatest
> > >>> stack
> > >>> > depth: 6536
> > >>> > > bytes
> > >>> > > > left
> > >>> > > > > pnp: PnP
> > >>> > > > > > ACPI init ACPI:
> bus
> > type pnp
> > >>> registered
> > >>> > > xen_allocate_pirq:
> > >>> > > > > returning irq
> > >>> > > > > > 8 for gsi 8
> Already
> > setup the GSI :8
> > >>> > > xen_allocate_pirq:
> > >>> > > > returning
> > >>> > > > > irq 13
> > >>> > > > > > for gsi 13
> Already
> > setup the GSI :13
> > >>> pnp:
> > >>> > PnP ACPI:
> > >>> > > found
> > >>> > > > 13
> > >>> > > > > devices
> > >>> > > > > > ACPI: ACPI bus
> type
> > pnp unregistered
> > >>> system
> > >>> > 00:07:
> > >>> > > ioport
> > >>> > > > range
> > >>> > > > > > 0x500-0x53f has
> been
> > reserved system
> > >>> 00:07:
> > >>> > ioport
> > >>> > > range
> > >>> > > > > 0x400-0x47f has
> > >>> > > > > > been reserved
> system
> > 00:07: ioport
> > >>> range
> > >>> > > 0x800-0x81f has
> > >>> > > > been
> > >>> > > > > reserved
> > >>> > > > > > system 00:07:
> ioport
> > range
> > >>> 0x2f8-0x2ff has
> > >>> > been
> > >>> > > reserved
> > >>> > > > system
> > >>> > > > > 00:07:
> > >>> > > > > > iomem range
> > 0xfed1c000-0xfed8bffe
> > >>> could not
> > >>> > be
> > >>> > > reserved
> > >>> > > > system
> > >>> > > > > 00:07:
> > >>> > > > > > iomem range
> > 0xff000000-0xffffffff
> > >>> could not
> > >>> > be
> > >>> > > reserved
> > >>> > > > system
> > >>> > > > > 00:07:
> > >>> > > > > > iomem range
> > 0xfee00000-0xfeefffff has
> > >>> been
> > >>> > reserved
> > >>> > > system
> > >>> > > > 00:07:
> > >>> > > > > iomem
> > >>> > > > > > range
> > 0xfe900000-0xfe90001f has been
> > >>> > reserved
> > >>> > > system
> > >>> > > > 00:07: iomem
> > >>> > > > > range
> > >>> > > > > >
> 0xfea00000-0xfea0001f
> > has been
> > >>> reserved
> > >>> > system
> > >>> > > 00:07:
> > >>> > > > iomem range
> > >>> > > > > >
> 0xfed1b000-0xfed1bfff
> > has been
> > >>> reserved pci
> > >>> > > 0000:0c:00.0:
> > >>> > > > BAR 6:
> > >>> > > > > no
> > >>> > > > > > parent found
> for of
> > device
> > >>> > [0xffff0000-0xffffffff]
> > >>> > > pci
> > >>> > > > > 0000:00:01.0: PCI
> > >>> > > > > > bridge,
> secondary bus
> > 0000:01 pci
> > >>> > 0000:00:01.0:
> > >>> > > IO
> > >>> > > > window:
> > >>> > > > > > 0x1000-0x1fff
> pci
> > 0000:00:01.0: MEM
> > >>> > window:
> > >>> > > > > 0xb1900000-0xb19fffff
> pci
> > >>> > > > > > 0000:00:01.0:
> > PREFETCH window:
> > >>> disabled
> > >>> > pci
> > >>> > > > 0000:00:02.0: PCI
> > >>> > > > > bridge,
> > >>> > > > > > secondary bus
> 0000:02
> > pci
> > >>> 0000:00:02.0: IO
> > >>> > > window:
> > >>> > > > disabled pci
> > >>> > > > > > 0000:00:02.0:
> MEM
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:02.0:
> > >>> > > > PREFETCH
> > >>> > > > > > window:
> disabled pci
> > 0000:00:03.0:
> > >>> PCI
> > >>> > bridge,
> > >>> > > secondary
> > >>> > > > bus
> > >>> > > > > 0000:03 pci
> > >>> > > > > > 0000:00:03.0:
> IO
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:03.0:
> > >>> > > > MEM
> > >>> > > > > window:
> > >>> > > > > > disabled pci
> > 0000:00:03.0: PREFETCH
> > >>> > window:
> > >>> > > disabled pci
> > >>> > > > > 0000:00:04.0:
> > >>> > > > > > PCI bridge,
> secondary
> > bus 0000:04 pci
> > >>> > 0000:00:04.0:
> > >>> > > IO
> > >>> > > > window:
> > >>> > > > > > disabled pci
> > 0000:00:04.0: MEM
> > >>> window:
> > >>> > disabled
> > >>> > > pci
> > >>> > > > > 0000:00:04.0:
> > >>> > > > > > PREFETCH
> window:
> > disabled pci
> > >>> 0000:00:05.0:
> > >>> > PCI
> > >>> > > bridge,
> > >>> > > > secondary
> > >>> > > > > bus
> > >>> > > > > > 0000:05 pci
> > 0000:00:05.0: IO
> > >>> window:
> > >>> > disabled pci
> > >>> > > > 0000:00:05.0:
> > >>> > > > > MEM
> > >>> > > > > > window:
> disabled pci
> > 0000:00:05.0:
> > >>> > PREFETCH
> > >>> > > window:
> > >>> > > > disabled
> > >>> > > > > pci
> > >>> > > > > > 0000:00:06.0:
> PCI
> > bridge, secondary
> > >>> bus
> > >>> > 0000:06 pci
> > >>> > > > 0000:00:06.0:
> > >>> > > > > IO
> > >>> > > > > > window:
> disabled pci
> > 0000:00:06.0:
> > >>> MEM
> > >>> > window:
> > >>> > > disabled
> > >>> > > > pci
> > >>> > > > > > 0000:00:06.0:
> > PREFETCH window:
> > >>> disabled
> > >>> > pci
> > >>> > > > 0000:00:07.0: PCI
> > >>> > > > > bridge,
> > >>> > > > > > secondary bus
> 0000:07
> > pci
> > >>> 0000:00:07.0: IO
> > >>> > > window:
> > >>> > > > disabled pci
> > >>> > > > > > 0000:00:07.0:
> MEM
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:07.0:
> > >>> > > > PREFETCH
> > >>> > > > > > window:
> disabled pci
> > 0000:00:08.0:
> > >>> PCI
> > >>> > bridge,
> > >>> > > secondary
> > >>> > > > bus
> > >>> > > > > 0000:08 pci
> > >>> > > > > > 0000:00:08.0:
> IO
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:08.0:
> > >>> > > > MEM
> > >>> > > > > window:
> > >>> > > > > > disabled pci
> > 0000:00:08.0: PREFETCH
> > >>> > window:
> > >>> > > disabled pci
> > >>> > > > > 0000:00:09.0:
> > >>> > > > > > PCI bridge,
> secondary
> > bus 0000:09 pci
> > >>> > 0000:00:09.0:
> > >>> > > IO
> > >>> > > > window:
> > >>> > > > > > 0x3000-0x3fff
> pci
> > 0000:00:09.0: MEM
> > >>> > window:
> > >>> > > > > 0xb1b00000-0xb1cfffff
> pci
> > >>> > > > > > 0000:00:09.0:
> > PREFETCH window:
> > >>> > > > >
> > 0x000000b1d00000-0x000000b1efffff pci
> > >>> > > > > > 0000:00:0a.0:
> PCI
> > bridge, secondary
> > >>> bus
> > >>> > 0000:0a pci
> > >>> > > > 0000:00:0a.0:
> > >>> > > > > IO
> > >>> > > > > > window:
> disabled pci
> > 0000:00:0a.0:
> > >>> MEM
> > >>> > window:
> > >>> > > disabled
> > >>> > > > pci
> > >>> > > > > > 0000:00:0a.0:
> > PREFETCH window:
> > >>> disabled
> > >>> > pci
> > >>> > > > 0000:00:1c.0: PCI
> > >>> > > > > bridge,
> > >>> > > > > > secondary bus
> 0000:0b
> > pci
> > >>> 0000:00:1c.0: IO
> > >>> > > window:
> > >>> > > > disabled pci
> > >>> > > > > > 0000:00:1c.0:
> MEM
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:1c.0:
> > >>> > > > PREFETCH
> > >>> > > > > > window:
> disabled pci
> > 0000:00:1c.4:
> > >>> PCI
> > >>> > bridge,
> > >>> > > secondary
> > >>> > > > bus
> > >>> > > > > 0000:0c pci
> > >>> > > > > > 0000:00:1c.4:
> IO
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:1c.4:
> > >>> > > > MEM
> > >>> > > > > window:
> > >>> > > > > >
> 0xb1000000-0xb18fffff
> > pci
> > >>> 0000:00:1c.4:
> > >>> > PREFETCH
> > >>> > > window:
> > >>> > > > > >
> > 0x000000b0000000-0x000000b0ffffff pci
> > >>> > 0000:00:1c.5:
> > >>> > > PCI
> > >>> > > > bridge,
> > >>> > > > > > secondary bus
> 0000:0d
> > pci
> > >>> 0000:00:1c.5: IO
> > >>> > > window:
> > >>> > > > disabled pci
> > >>> > > > > > 0000:00:1c.5:
> MEM
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:1c.5:
> > >>> > > > PREFETCH
> > >>> > > > > > window:
> disabled pci
> > 0000:00:1e.0:
> > >>> PCI
> > >>> > bridge,
> > >>> > > secondary
> > >>> > > > bus
> > >>> > > > > 0000:0e pci
> > >>> > > > > > 0000:00:1e.0:
> IO
> > window: disabled
> > >>> pci
> > >>> > > 0000:00:1e.0:
> > >>> > > > MEM
> > >>> > > > > window:
> > >>> > > > > > disabled pci
> > 0000:00:1e.0: PREFETCH
> > >>> > window:
> > >>> > > disabled pci
> > >>> > > > > 0000:00:01.0:
> > >>> > > > > > PCI INT A ->
> GSI 28
> > (level, low) ->
> > >>> IRQ 28
> > >>> > pci
> > >>> > > > 0000:00:02.0: PCI
> > >>> > > > > INT A
> > >>> > > > > > -> GSI 29
> (level,
> > low) -> IRQ 29 pci
> > >>> > 0000:00:03.0:
> > >>> > > PCI INT
> > >>> > > > A ->
> > >>> > > > > GSI 24
> > >>> > > > > > (level, low) ->
> IRQ
> > 24 pci
> > >>> 0000:00:04.0: PCI
> > >>> > INT A
> > >>> > > -> GSI
> > >>> > > > 25
> > >>> > > > > (level,
> > >>> > > > > > low) -> IRQ 25
> pci
> > 0000:00:05.0: PCI
> > >>> INT A
> > >>> > -> GSI
> > >>> > > 26
> > >>> > > > (level, low)
> > >>> > > > > -> IRQ
> > >>> > > > > > 26 pci
> 0000:00:06.0:
> > PCI INT A -> GSI
> > >>> 27
> > >>> > (level,
> > >>> > > low) ->
> > >>> > > > IRQ 27
> > >>> > > > > pci
> > >>> > > > > > 0000:00:07.0:
> PCI INT
> > A -> GSI 30
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 30
> > >>> > > > pci
> > >>> > > > > > 0000:00:08.0:
> PCI INT
> > A -> GSI 31
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 31
> > >>> > > > pci
> > >>> > > > > > 0000:00:09.0:
> PCI INT
> > A -> GSI 32
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 32
> > >>> > > > pci
> > >>> > > > > > 0000:00:0a.0:
> PCI INT
> > A -> GSI 33
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 33
> > >>> > > > pci
> > >>> > > > > > 0000:00:1c.0:
> PCI INT
> > A -> GSI 16
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 16
> > >>> > > > > >
> xen_allocate_pirq:
> > returning irq 16
> > >>> for gsi
> > >>> > 16
> > >>> > > Already
> > >>> > > > setup the
> > >>> > > > > GSI :16
> > >>> > > > > > pci
> 0000:00:1c.4: PCI
> > INT A -> GSI 16
> > >>> > (level, low)
> > >>> > > -> IRQ
> > >>> > > > 16 pci
> > >>> > > > > > 0000:00:1c.5:
> PCI INT
> > B -> GSI 17
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 17
> > >>> > > > NET:
> > >>> > > > > Registered
> > >>> > > > > > protocol family
> 2 IP
> > route cache hash
> > >>> table
> > >>> > > entries: 65536
> > >>> > > > > (order: 7,
> > >>> > > > > > 524288 bytes)
> TCP
> > established hash
> > >>> table
> > >>> > entries:
> > >>> > > 262144
> > >>> > > > (order:
> > >>> > > > > 10,
> > >>> > > > > > 4194304 bytes)
> TCP
> > bind hash table
> > >>> entries:
> > >>> > 65536
> > >>> > > (order:
> > >>> > > > 10,
> > >>> > > > > 4718592
> > >>> > > > > > bytes) TCP:
> Hash
> > tables configured
> > >>> > (established
> > >>> > > 262144
> > >>> > > > bind
> > >>> > > > > 65536) TCP
> > >>> > > > > > reno registered
> NET:
> > Registered
> > >>> protocol
> > >>> > family 1
> > >>> > > pci
> > >>> > > > > 0000:01:00.0:
> > >>> > > > > > Disabling L0s
> pci
> > 0000:01:00.1:
> > >>> Disabling
> > >>> > L0s
> > >>> > > Trying to
> > >>> > > > unpack
> > >>> > > > > rootfs
> > >>> > > > > > image as
> initramfs...
> > Freeing initrd
> > >>> memory:
> > >>> > 6474k
> > >>> > > freed
> > >>> > > > DMA-API:
> > >>> > > > > > preallocated
> 32768
> > debug entries
> > >>> DMA-API:
> > >>> > debugging
> > >>> > > > enabled by
> > >>> > > > > kernel
> > >>> > > > > > config PCI-DMA:
> Using
> > software bounce
> > >>> > buffering for
> > >>> > > IO
> > >>> > > > (SWIOTLB)
> > >>> > > > > DMA:
> > >>> > > > > > Placing 64MB
> software
> > IO TLB between
> > >>> > > ffff880007525000 -
> > >>> > > > > ffff88000b525000
> > >>> > > > > > DMA: software
> IO TLB
> > at phys
> > >>> 0x7525000 -
> > >>> > 0xb525000
> > >>> > > audit:
> > >>> > > > > initializing
> > >>> > > > > > netlink socket
> > (disabled) type=2000
> > >>> > > > audit(1268750702.035:1):
> > >>> > > > > initialized
> > >>> > > > > > HugeTLB
> registered 2
> > MB page size,
> > >>> > pre-allocated 0
> > >>> > > pages
> > >>> > > > VFS:
> > >>> > > > > Disk
> > >>> > > > > > quotas
> dquot_6.5.2
> > Dquot-cache hash
> > >>> table
> > >>> > entries:
> > >>> > > 512
> > >>> > > > (order 0,
> > >>> > > > > 4096
> > >>> > > > > > bytes) msgmni
> has been
> > set to 2970
> > >>> > cryptomgr_test
> > >>> > > used
> > >>> > > > greatest
> > >>> > > > > stack
> > >>> > > > > > depth: 5864
> bytes left
> > cryptomgr_test
> > >>> used
> > >>> > greatest
> > >>> > > stack
> > >>> > > > depth:
> > >>> > > > > 5816
> > >>> > > > > > bytes left alg:
> No
> > test for stdrng
> > >>> (krng)
> > >>> > Block
> > >>> > > layer SCSI
> > >>> > > > > generic (bsg)
> > >>> > > > > > driver version
> 0.4
> > loaded (major 252)
> > >>> io
> > >>> > scheduler
> > >>> > > noop
> > >>> > > > > registered io
> > >>> > > > > > scheduler
> anticipatory
> > registered io
> > >>> > scheduler
> > >>> > > deadline
> > >>> > > > > registered io
> > >>> > > > > > scheduler cfq
> > registered (default)
> > >>> > pci_hotplug: PCI
> > >>> > > Hot
> > >>> > > > Plug PCI
> > >>> > > > > Core
> > >>> > > > > > version: 0.5
> pciehp
> > >>> 0000:00:09.0:pcie04: HPC
> > >>> > > vendor_id
> > >>> > > > 8086
> > >>> > > > > device_id
> > >>> > > > > > 3410 ss_vid 0
> ss_did 0
> > pciehp: PCI
> > >>> Express
> > >>> > Hot Plug
> > >>> > > > Controller
> > >>> > > > > Driver
> > >>> > > > > > version: 0.4
> acpiphp:
> > ACPI Hot Plug
> > >>> PCI
> > >>> > Controller
> > >>> > > Driver
> > >>> > > > > version: 0.5
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > acpiphp_glue:
> Slot 2
> > already
> > >>> registered by
> > >>> > another
> > >>> > > hotplug
> > >>> > > > driver
> > >>> > > > > > pci-stub:
> invalid id
> > string "" input:
> > >>> Sleep
> > >>> > Button
> > >>> > > as
> > >>> > > > > >
> > >>> > >
> > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
> > >>> > > > ACPI:
> > >>> > > > > Sleep
> > >>> > > > > > Button [SLPB]
> input:
> > Power Button as
> > >>> > > > > >
> > >>> > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> ACPI:
> > >>> > > Power
> > >>> > > > Button
> > >>> > > > > [PWRF]
> > >>> > > > > > registering
> netback
> > hpet_acpi_add: no
> > >>> > address or
> > >>> > > irqs in
> > >>> > > > _CRS
> > >>> > > > > > Non-volatile
> memory
> > driver v1.3 Linux
> > >>> > agpgart
> > >>> > > interface
> > >>> > > > v0.103
> > >>> > > > > Serial:
> > >>> > > > > > 8250/16550
> driver, 4
> > ports, IRQ
> > >>> sharing
> > >>> > enabled
> > >>> > > > serial8250: ttyS1
> > >>> > > > > at I/O
> > >>> > > > > > 0x2f8 (irq = 3)
> is a
> > 16550A brd:
> > >>> module
> > >>> > loaded
> > >>> > > loop:
> > >>> > > > module
> > >>> > > > > loaded
> > >>> > > > > > input:
> Macintosh mouse
> > button
> > >>> emulation as
> > >>> > > > >
> /devices/virtual/input/input2
> > >>> > > > > > ahci
> 0000:00:1f.2: PCI
> > INT A -> GSI
> > >>> 19
> > >>> > (level, low)
> > >>> > > -> IRQ
> > >>> > > > 19
> > >>> > > > > ahci
> > >>> > > > > > 0000:00:1f.2:
> AHCI
> > 0001.0200 32 slots
> > >>> 6
> > >>> > ports 3
> > >>> > > Gbps 0x3f
> > >>> > > > impl
> > >>> > > > > SATA mode
> > >>> > > > > > ahci
> 0000:00:1f.2:
> > flags: 64bit ncq
> > >>> sntf pm
> > >>> > led clo
> > >>> > > pio
> > >>> > > > slum part
> > >>> > > > > ccc
> > >>> > > > > > ems scsi0 :
> ahci
> > scsi1 : ahci scsi2
> > >>> : ahci
> > >>> > scsi3 :
> > >>> > > ahci
> > >>> > > > scsi4 :
> > >>> > > > > ahci
> > >>> > > > > > scsi5 : ahci
> ata1:
> > SATA max UDMA/133
> > >>> > irq_stat
> > >>> > > 0x00400040,
> > >>> > > > > connection
> > >>> > > > > > status changed
> irq
> > 2996 ata2: SATA
> > >>> max
> > >>> > UDMA/133
> > >>> > > abar
> > >>> > > > > m2048@0xb1a00000
> > >>> > > > > > port 0xb1a00180
> irq
> > 2996 ata3: SATA
> > >>> max
> > >>> > UDMA/133
> > >>> > > abar
> > >>> > > > > m2048@0xb1a00000
> > >>> > > > > > port 0xb1a00200
> irq
> > 2996 ata4: SATA
> > >>> max
> > >>> > UDMA/133
> > >>> > > abar
> > >>> > > > > m2048@0xb1a00000
> > >>> > > > > > port 0xb1a00280
> irq
> > 2996 ata5: SATA
> > >>> max
> > >>> > UDMA/133
> > >>> > > abar
> > >>> > > > > m2048@0xb1a00000
> > >>> > > > > > port 0xb1a00300
> irq
> > 2996 ata6: SATA
> > >>> max
> > >>> > UDMA/133
> > >>> > > abar
> > >>> > > > > m2048@0xb1a00000
> > >>> > > > > > port 0xb1a00380
> irq
> > 2996 Fixed MDIO
> > >>> Bus:
> > >>> > probed
> > >>> > > ehci_hcd:
> > >>> > > > USB 2.0
> > >>> > > > > > 'Enhanced' Host
> > Controller (EHCI)
> > >>> Driver
> > >>> > ehci_hcd
> > >>> > > > 0000:00:1a.7:
> > >>> > > > > PCI INT
> > >>> > > > > > C -> GSI 18
> (level,
> > low) -> IRQ 18
> > >>> ehci_hcd
> > >>> > > 0000:00:1a.7:
> > >>> > > > EHCI
> > >>> > > > > Host
> > >>> > > > > > Controller
> ehci_hcd
> > 0000:00:1a.7: new
> > >>> USB
> > >>> > bus
> > >>> > > registered,
> > >>> > > > > assigned bus
> > >>> > > > > > number 1
> ehci_hcd
> > 0000:00:1a.7: debug
> > >>> port 1
> > >>> > > ehci_hcd
> > >>> > > > > 0000:00:1a.7: irq
> > >>> > > > > > 18, io mem
> 0xb1a02000
> > ehci_hcd
> > >>> 0000:00:1a.7:
> > >>> > USB
> > >>> > > 2.0
> > >>> > > > started,
> > >>> > > > > EHCI 1.00
> > >>> > > > > > usb usb1: New
> USB
> > device found,
> > >>> > idVendor=1d6b,
> > >>> > > > idProduct=0002 usb
> > >>> > > > > usb1:
> > >>> > > > > > New USB device
> > strings: Mfr=3,
> > >>> Product=2,
> > >>> > > SerialNumber=1
> > >>> > > > usb
> > >>> > > > > usb1:
> > >>> > > > > > Product: EHCI
> Host
> > Controller usb
> > >>> usb1:
> > >>> > > Manufacturer:
> > >>> > > > Linux
> > >>> > > > > 2.6.32.9
> > >>> > > > > > ehci_hcd usb
> usb1:
> > SerialNumber:
> > >>> > 0000:00:1a.7 usb
> > >>> > > usb1:
> > >>> > > > > configuration #1
> > >>> > > > > > chosen from 1
> choice
> > hub 1-0:1.0: USB
> > >>> hub
> > >>> > found hub
> > >>> > > > 1-0:1.0: 6
> > >>> > > > > ports
> > >>> > > > > > detected
> ehci_hcd
> > 0000:00:1d.7: PCI
> > >>> INT A ->
> > >>> > GSI 23
> > >>> > > > (level, low)
> > >>> > > > > -> IRQ
> > >>> > > > > > 23 ehci_hcd
> > 0000:00:1d.7: EHCI Host
> > >>> > Controller
> > >>> > > ehci_hcd
> > >>> > > > > 0000:00:1d.7:
> > >>> > > > > > new USB bus
> > registered, assigned bus
> > >>> number
> > >>> > 2
> > >>> > > ehci_hcd
> > >>> > > > > 0000:00:1d.7:
> > >>> > > > > > debug port 1
> ehci_hcd
> > 0000:00:1d.7:
> > >>> irq 23,
> > >>> > io mem
> > >>> > > > 0xb1a01000
> > >>> > > > > ehci_hcd
> > >>> > > > > > 0000:00:1d.7:
> USB 2.0
> > started, EHCI
> > >>> 1.00 usb
> > >>> > usb2:
> > >>> > > New USB
> > >>> > > > device
> > >>> > > > > found,
> > >>> > > > > > idVendor=1d6b,
> > idProduct=0002 usb
> > >>> usb2: New
> > >>> > USB
> > >>> > > device
> > >>> > > > strings:
> > >>> > > > > Mfr=3,
> > >>> > > > > > Product=2,
> > SerialNumber=1 usb usb2:
> > >>> Product:
> > >>> > EHCI
> > >>> > > Host
> > >>> > > > Controller
> > >>> > > > > usb
> > >>> > > > > > usb2:
> Manufacturer:
> > Linux 2.6.32.9
> > >>> ehci_hcd
> > >>> > usb
> > >>> > > usb2:
> > >>> > > > > SerialNumber:
> > >>> > > > > > 0000:00:1d.7
> usb usb2:
> > configuration
> > >>> #1
> > >>> > chosen from
> > >>> > > 1
> > >>> > > > choice hub
> > >>> > > > > > 2-0:1.0: USB
> hub found
> > hub 2-0:1.0: 6
> > >>> ports
> > >>> > > detected
> > >>> > > > ohci_hcd:
> > >>> > > > > USB 1.1
> > >>> > > > > > 'Open' Host
> Controller
> > (OHCI) Driver
> > >>> > uhci_hcd: USB
> > >>> > > > Universal Host
> > >>> > > > > > Controller
> Interface
> > driver
> > >>> > xen_allocate_pirq:
> > >>> > > returning
> > >>> > > > irq 16
> > >>> > > > > for gsi
> > >>> > > > > > 16 Already
> setup the
> > GSI :16 uhci_hcd
> > >>> > 0000:00:1a.0:
> > >>> > > PCI
> > >>> > > > INT A ->
> > >>> > > > > GSI 16
> > >>> > > > > > (level, low) ->
> IRQ
> > 16 uhci_hcd
> > >>> > 0000:00:1a.0: UHCI
> > >>> > > Host
> > >>> > > > > Controller
> > >>> > > > > > uhci_hcd
> 0000:00:1a.0:
> > new USB bus
> > >>> > registered,
> > >>> > > assigned
> > >>> > > > bus
> > >>> > > > > number 3
> > >>> > > > > > uhci_hcd
> 0000:00:1a.0:
> > irq 16, io
> > >>> base
> > >>> > 0x000020e0
> > >>> > > usb
> > >>> > > > usb3: New
> > >>> > > > > USB
> > >>> > > > > > device found,
> > idVendor=1d6b,
> > >>> idProduct=0001
> > >>> > usb
> > >>> > > usb3: New
> > >>> > > > USB
> > >>> > > > > device
> > >>> > > > > > strings: Mfr=3,
> > Product=2,
> > >>> SerialNumber=1
> > >>> > usb usb3:
> > >>> > > > Product: UHCI
> > >>> > > > > Host
> > >>> > > > > > Controller usb
> usb3:
> > Manufacturer:
> > >>> Linux
> > >>> > 2.6.32.9
> > >>> > > uhci_hcd
> > >>> > > > usb
> > >>> > > > > usb3:
> > >>> > > > > > SerialNumber:
> > 0000:00:1a.0 usb usb3:
> > >>> > configuration
> > >>> > > #1
> > >>> > > > chosen from
> > >>> > > > > 1
> > >>> > > > > > choice hub
> 3-0:1.0:
> > USB hub found hub
> > >>> > 3-0:1.0: 2
> > >>> > > ports
> > >>> > > > detected
> > >>> > > > > uhci_hcd
> > >>> > > > > > 0000:00:1a.1:
> PCI INT
> > B -> GSI 21
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 21
> > >>> > > > uhci_hcd
> > >>> > > > > > 0000:00:1a.1:
> UHCI
> > Host Controller
> > >>> uhci_hcd
> > >>> > > 0000:00:1a.1:
> > >>> > > > new USB
> > >>> > > > > bus
> > >>> > > > > > registered,
> assigned
> > bus number 4
> > >>> uhci_hcd
> > >>> > > 0000:00:1a.1:
> > >>> > > > irq 21,
> > >>> > > > > io base
> > >>> > > > > > 0x000020c0 usb
> usb4:
> > New USB device
> > >>> found,
> > >>> > > idVendor=1d6b,
> > >>> > > > > idProduct=0001
> > >>> > > > > > usb usb4: New
> USB
> > device strings:
> > >>> Mfr=3,
> > >>> > Product=2,
> > >>> > > > > SerialNumber=1 usb
> > >>> > > > > > usb4: Product:
> UHCI
> > Host Controller
> > >>> usb
> > >>> > usb4:
> > >>> > > > Manufacturer: Linux
> > >>> > > > > > 2.6.32.9
> uhci_hcd usb
> > usb4:
> > >>> SerialNumber:
> > >>> > > 0000:00:1a.1 usb
> > >>> > > > usb4:
> > >>> > > > > > configuration
> #1
> > chosen from 1 choice
> > >>> hub
> > >>> > 4-0:1.0:
> > >>> > > USB hub
> > >>> > > > found
> > >>> > > > > hub
> > >>> > > > > > 4-0:1.0: 2
> ports
> > detected
> > >>> xen_allocate_pirq:
> > >>> > > returning irq
> > >>> > > > 19 for
> > >>> > > > > gsi 19
> > >>> > > > > > Already setup
> the GSI
> > :19 uhci_hcd
> > >>> > 0000:00:1a.2:
> > >>> > > PCI INT D
> > >>> > > > -> GSI
> > >>> > > > > 19
> > >>> > > > > > (level, low) ->
> IRQ
> > 19 uhci_hcd
> > >>> > 0000:00:1a.2: UHCI
> > >>> > > Host
> > >>> > > > > Controller
> > >>> > > > > > uhci_hcd
> 0000:00:1a.2:
> > new USB bus
> > >>> > registered,
> > >>> > > assigned
> > >>> > > > bus
> > >>> > > > > number 5
> > >>> > > > > > uhci_hcd
> 0000:00:1a.2:
> > irq 19, io
> > >>> base
> > >>> > 0x000020a0
> > >>> > > usb
> > >>> > > > usb5: New
> > >>> > > > > USB
> > >>> > > > > > device found,
> > idVendor=1d6b,
> > >>> idProduct=0001
> > >>> > usb
> > >>> > > usb5: New
> > >>> > > > USB
> > >>> > > > > device
> > >>> > > > > > strings: Mfr=3,
> > Product=2,
> > >>> SerialNumber=1
> > >>> > usb usb5:
> > >>> > > > Product: UHCI
> > >>> > > > > Host
> > >>> > > > > > Controller usb
> usb5:
> > Manufacturer:
> > >>> Linux
> > >>> > 2.6.32.9
> > >>> > > uhci_hcd
> > >>> > > > usb
> > >>> > > > > usb5:
> > >>> > > > > > SerialNumber:
> > 0000:00:1a.2 usb usb5:
> > >>> > configuration
> > >>> > > #1
> > >>> > > > chosen from
> > >>> > > > > 1
> > >>> > > > > > choice hub
> 5-0:1.0:
> > USB hub found hub
> > >>> > 5-0:1.0: 2
> > >>> > > ports
> > >>> > > > detected
> > >>> > > > > >
> xen_allocate_pirq:
> > returning irq 23
> > >>> for gsi
> > >>> > 23
> > >>> > > Already
> > >>> > > > setup the
> > >>> > > > > GSI :23
> > >>> > > > > > uhci_hcd
> 0000:00:1d.0:
> > PCI INT A ->
> > >>> GSI 23
> > >>> > (level,
> > >>> > > low) ->
> > >>> > > > IRQ 23
> > >>> > > > > > uhci_hcd
> 0000:00:1d.0:
> > UHCI Host
> > >>> Controller
> > >>> > > uhci_hcd
> > >>> > > > > 0000:00:1d.0: new
> > >>> > > > > > USB bus
> registered,
> > assigned bus
> > >>> number 6
> > >>> > uhci_hcd
> > >>> > > > 0000:00:1d.0:
> > >>> > > > > irq 23,
> > >>> > > > > > io base
> 0x00002080 usb
> > usb6: New USB
> > >>> device
> > >>> > found,
> > >>> > > > idVendor=1d6b,
> > >>> > > > > > idProduct=0001
> usb
> > usb6: New USB
> > >>> device
> > >>> > strings:
> > >>> > > Mfr=3,
> > >>> > > > > Product=2,
> > >>> > > > > > SerialNumber=1
> usb
> > usb6: Product:
> > >>> UHCI Host
> > >>> > > Controller usb
> > >>> > > > usb6:
> > >>> > > > > > Manufacturer:
> Linux
> > 2.6.32.9 uhci_hcd
> > >>> usb
> > >>> > usb6:
> > >>> > > > SerialNumber:
> > >>> > > > > > 0000:00:1d.0
> usb usb6:
> > configuration
> > >>> #1
> > >>> > chosen from
> > >>> > > 1
> > >>> > > > choice hub
> > >>> > > > > > 6-0:1.0: USB
> hub found
> > hub 6-0:1.0: 2
> > >>> ports
> > >>> > > detected
> > >>> > > > > xen_allocate_pirq:
> > >>> > > > > > returning irq
> 19 for
> > gsi 19 Already
> > >>> setup
> > >>> > the GSI
> > >>> > > :19
> > >>> > > > uhci_hcd
> > >>> > > > > > 0000:00:1d.1:
> PCI INT
> > B -> GSI 19
> > >>> (level,
> > >>> > low) ->
> > >>> > > IRQ 19
> > >>> > > > uhci_hcd
> > >>> > > > > > 0000:00:1d.1:
> UHCI
> > Host Controller
> > >>> uhci_hcd
> > >>> > > 0000:00:1d.1:
> > >>> > > > new USB
> > >>> > > > > bus
> > >>> > > > > > registered,
> assigned
> > bus number 7
> > >>> uhci_hcd
> > >>> > > 0000:00:1d.1:
> > >>> > > > irq 19,
> > >>> > > > > io base
> > >>> > > > > > 0x00002060 usb
> usb7:
> > New USB device
> > >>> found,
> > >>> > > idVendor=1d6b,
> > >>> > > > > idProduct=0001
> > >>> > > > > > usb usb7: New
> USB
> > device strings:
> > >>> Mfr=3,
> > >>> > Product=2,
> > >>> > > > > SerialNumber=1 usb
> > >>> > > > > > usb7: Product:
> UHCI
> > Host Controller
> > >>> usb
> > >>> > usb7:
> > >>> > > > Manufacturer: Linux
> > >>> > > > > > 2.6.32.9
> uhci_hcd usb
> > usb7:
> > >>> SerialNumber:
> > >>> > > 0000:00:1d.1 usb
> > >>> > > > usb7:
> > >>> > > > > > configuration
> #1
> > chosen from 1 choice
> > >>> hub
> > >>> > 7-0:1.0:
> > >>> > > USB hub
> > >>> > > > found
> > >>> > > > > hub
> > >>> > > > > > 7-0:1.0: 2
> ports
> > detected
> > >>> xen_allocate_pirq:
> > >>> > > returning irq
> > >>> > > > 18 for
> > >>> > > > > gsi 18
> > >>> > > > > > Already setup
> the GSI
> > :18 uhci_hcd
> > >>> > 0000:00:1d.2:
> > >>> > > PCI INT C
> > >>> > > > -> GSI
> > >>> > > > > 18
> > >>> > > > > > (level, low) ->
> IRQ
> > 18 uhci_hcd
> > >>> > 0000:00:1d.2: UHCI
> > >>> > > Host
> > >>> > > > > Controller
> > >>> > > > > > uhci_hcd
> 0000:00:1d.2:
> > new USB bus
> > >>> > registered,
> > >>> > > assigned
> > >>> > > > bus
> > >>> > > > > number 8
> > >>> > > > > > uhci_hcd
> 0000:00:1d.2:
> > irq 18, io
> > >>> base
> > >>> > 0x00002040
> > >>> > > usb
> > >>> > > > usb8: New
> > >>> > > > > USB
> > >>> > > > > > device found,
> > idVendor=1d6b,
> > >>> idProduct=0001
> > >>> > usb
> > >>> > > usb8: New
> > >>> > > > USB
> > >>> > > > > device
> > >>> > > > > > strings: Mfr=3,
> > Product=2,
> > >>> SerialNumber=1
> > >>> > usb usb8:
> > >>> > > > Product: UHCI
> > >>> > > > > Host
> > >>> > > >
> > >>> > >
> > >>> > > References
> > >>> > >
> > >>> > > Visible links
> > >>> > > 1. mailto:[20][21][22][24]pasik@xxxxxx
> > >>> > > 2. mailto:[21][22][23][25]pasik@xxxxxx
> > >>> > > 3. mailto:[22][23][24][26]pasik@xxxxxx
> > >>> > > 4. mailto:[23][24][25][27]pasik@xxxxxx
> > >>> > > 5. mailto:[24][25][26][28]pasik@xxxxxx
> > >>> > > 6.
> > >>> >
> > >>>
> >
>
> [25][26][27][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > 7.
> > >>> >
> > >>>
> >
>
> [26][27][28][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > 8. mailto:[27][28][29][31]pasik@xxxxxx
> > >>> > > 9.
> > >>> >
> > >>>
> >
>
> [28][29][30][32]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > 10.
> > >>> >
> > >>>
> >
>
> [29][30][31][33]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > 11. mailto:[30][31][32][34]pasik@xxxxxx
> > >>> > > 12. mailto:[31][32][33][35]pasik@xxxxxx
> > >>> > > 13.
> > >>> >
> > >>>
> >
>
> [32][33][34][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > 14.
> > >>> >
> > >>>
> >
>
> [33][34][35][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > 15. mailto:[34][35][36][38]pasik@xxxxxx
> > >>> > > 16.
> > >>> >
> > >>>
> >
>
> [35][36][37][39]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > > 17.
> > >>> >
> > >>>
> >
>
> [36][37][38][40]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > > 18. mailto:[37][38][39][41]pasik@xxxxxx
> > >>> >
> > >>> > References
> > >>> >
> > >>> > Visible links
> > >>> > 1. mailto:[39][40][42]pasik@xxxxxx
> > >>> > 2. mailto:[40][41][43]pasik@xxxxxx
> > >>> > 3. mailto:[41][42][44]pasik@xxxxxx
> > >>> > 4. mailto:[42][43][45]pasik@xxxxxx
> > >>> > 5. mailto:[43][44][46]pasik@xxxxxx
> > >>> > 6. mailto:[44][45][47]pasik@xxxxxx
> > >>> > 7.
> > >>>
> >
>
> [45][46][48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 8.
> > >>>
> >
>
> [46][47][49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 9. mailto:[47][48][50]pasik@xxxxxx
> > >>> > 10.
> > >>>
> >
>
> [48][49][51]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 11.
> > >>>
> >
>
> [49][50][52]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 12. mailto:[50][51][53]pasik@xxxxxx
> > >>> > 13. mailto:[51][52][54]pasik@xxxxxx
> > >>> > 14.
> > >>>
> >
>
> [52][53][55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 15.
> > >>>
> >
>
> [53][54][56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 16. mailto:[54][55][57]pasik@xxxxxx
> > >>> > 17.
> > >>>
> >
>
> [55][56][58]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 18.
> > >>>
> >
>
> [56][57][59]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 19. mailto:[57][58][60]pasik@xxxxxx
> > >>> > 20. mailto:[58][59][61]pasik@xxxxxx
> > >>> > 21. mailto:[59][60][62]pasik@xxxxxx
> > >>> > 22. mailto:[60][61][63]pasik@xxxxxx
> > >>> > 23. mailto:[61][62][64]pasik@xxxxxx
> > >>> > 24. mailto:[62][63][65]pasik@xxxxxx
> > >>> > 25.
> > >>>
> >
>
> [63][64][66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 26.
> > >>>
> >
>
> [64][65][67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 27. mailto:[65][66][68]pasik@xxxxxx
> > >>> > 28.
> > >>>
> >
>
> [66][67][69]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 29.
> > >>>
> >
>
> [67][68][70]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 30. mailto:[68][69][71]pasik@xxxxxx
> > >>> > 31. mailto:[69][70][72]pasik@xxxxxx
> > >>> > 32.
> > >>>
> >
>
> [70][71][73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 33.
> > >>>
> >
>
> [71][72][74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 34. mailto:[72][73][75]pasik@xxxxxx
> > >>> > 35.
> > >>>
> >
>
> [73][74][76]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> > 36.
> > >>>
> >
>
> [74][75][77]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> > 37. mailto:[75][76][78]pasik@xxxxxx
> > >>>
> > >>> References
> > >>>
> > >>> Visible links
> > >>> 1. mailto:[77][79]pasik@xxxxxx
> > >>> 2. mailto:[78][80]pasik@xxxxxx
> > >>> 3. mailto:[79][81]pasik@xxxxxx
> > >>> 4. mailto:[80][82]pasik@xxxxxx
> > >>> 5. mailto:[81][83]pasik@xxxxxx
> > >>> 6. mailto:[82][84]pasik@xxxxxx
> > >>> 7. mailto:[83][85]pasik@xxxxxx
> > >>> 8.
> >
> [84][86]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 9.
> >
>
> [85][87]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 10. mailto:[86][88]pasik@xxxxxx
> > >>> 11.
> >
> [87][89]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 12.
> >
>
> [88][90]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 13. mailto:[89][91]pasik@xxxxxx
> > >>> 14. mailto:[90][92]pasik@xxxxxx
> > >>> 15.
> >
> [91][93]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 16.
> >
>
> [92][94]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 17. mailto:[93][95]pasik@xxxxxx
> > >>> 18.
> >
> [94][96]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 19.
> >
>
> [95][97]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 20. mailto:[96][98]pasik@xxxxxx
> > >>> 21. mailto:[97][99]pasik@xxxxxx
> > >>> 22. mailto:[98][100]pasik@xxxxxx
> > >>> 23. mailto:[99][101]pasik@xxxxxx
> > >>> 24. mailto:[100][102]pasik@xxxxxx
> > >>> 25. mailto:[101][103]pasik@xxxxxx
> > >>> 26.
> >
> [102][104]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 27.
> >
>
> [103][105]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 28. mailto:[104][106]pasik@xxxxxx
> > >>> 29.
> >
> [105][107]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 30.
> >
>
> [106][108]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 31. mailto:[107][109]pasik@xxxxxx
> > >>> 32. mailto:[108][110]pasik@xxxxxx
> > >>> 33.
> >
> [109][111]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 34.
> >
>
> [110][112]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 35. mailto:[111][113]pasik@xxxxxx
> > >>> 36.
> >
> [112][114]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 37.
> >
>
> [113][115]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 38. mailto:[114][116]pasik@xxxxxx
> > >>> 39. mailto:[115][117]pasik@xxxxxx
> > >>> 40. mailto:[116][118]pasik@xxxxxx
> > >>> 41. mailto:[117][119]pasik@xxxxxx
> > >>> 42. mailto:[118][120]pasik@xxxxxx
> > >>> 43. mailto:[119][121]pasik@xxxxxx
> > >>> 44. mailto:[120][122]pasik@xxxxxx
> > >>> 45.
> >
> [121][123]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 46.
> >
>
> [122][124]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 47. mailto:[123][125]pasik@xxxxxx
> > >>> 48.
> >
> [124][126]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 49.
> >
>
> [125][127]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 50. mailto:[126][128]pasik@xxxxxx
> > >>> 51. mailto:[127][129]pasik@xxxxxx
> > >>> 52.
> >
> [128][130]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 53.
> >
>
> [129][131]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 54. mailto:[130][132]pasik@xxxxxx
> > >>> 55.
> >
> [131][133]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 56.
> >
>
> [132][134]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 57. mailto:[133][135]pasik@xxxxxx
> > >>> 58. mailto:[134][136]pasik@xxxxxx
> > >>> 59. mailto:[135][137]pasik@xxxxxx
> > >>> 60. mailto:[136][138]pasik@xxxxxx
> > >>> 61. mailto:[137][139]pasik@xxxxxx
> > >>> 62. mailto:[138][140]pasik@xxxxxx
> > >>> 63.
> >
> [139][141]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 64.
> >
>
> [140][142]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 65. mailto:[141][143]pasik@xxxxxx
> > >>> 66.
> >
> [142][144]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 67.
> >
>
> [143][145]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 68. mailto:[144][146]pasik@xxxxxx
> > >>> 69. mailto:[145][147]pasik@xxxxxx
> > >>> 70.
> >
> [146][148]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 71.
> >
>
> [147][149]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 72. mailto:[148][150]pasik@xxxxxx
> > >>> 73.
> >
> [149][151]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > >>> 74.
> >
>
> [150][152]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > >>> 75. mailto:[151][153]pasik@xxxxxx
> > >>>
> > >>
> > >>
> > >
> >
> > References
> >
> > Visible links
> > 1. mailto:[154]pasik@xxxxxx
> > 2. mailto:[155]pasik@xxxxxx
> > 3. mailto:[156]pasik@xxxxxx
> > 4. mailto:[157]pasik@xxxxxx
> > 5. mailto:[158]pasik@xxxxxx
> > 6. mailto:[159]pasik@xxxxxx
> > 7. mailto:[160]pasik@xxxxxx
> > 8. mailto:[161]pasik@xxxxxx
> > 9.
> [162]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 10.
>
> [163]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 11. mailto:[164]pasik@xxxxxx
> > 12.
> [165]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 13.
>
> [166]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 14. mailto:[167]pasik@xxxxxx
> > 15. mailto:[168]pasik@xxxxxx
> > 16.
> [169]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 17.
>
> [170]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 18. mailto:[171]pasik@xxxxxx
> > 19.
> [172]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 20.
>
> [173]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 21. mailto:[174]pasik@xxxxxx
> > 22. mailto:[175]pasik@xxxxxx
> > 23. mailto:[176]pasik@xxxxxx
> > 24. mailto:[177]pasik@xxxxxx
> > 25. mailto:[178]pasik@xxxxxx
> > 26. mailto:[179]pasik@xxxxxx
> > 27.
> [180]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 28.
>
> [181]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 29. mailto:[182]pasik@xxxxxx
> > 30.
> [183]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 31.
>
> [184]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 32. mailto:[185]pasik@xxxxxx
> > 33. mailto:[186]pasik@xxxxxx
> > 34.
> [187]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 35.
>
> [188]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 36. mailto:[189]pasik@xxxxxx
> > 37.
> [190]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 38.
>
> [191]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 39. mailto:[192]pasik@xxxxxx
> > 40. mailto:[193]pasik@xxxxxx
> > 41. mailto:[194]pasik@xxxxxx
> > 42. mailto:[195]pasik@xxxxxx
> > 43. mailto:[196]pasik@xxxxxx
> > 44. mailto:[197]pasik@xxxxxx
> > 45. mailto:[198]pasik@xxxxxx
> > 46.
> [199]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 47.
>
> [200]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 48. mailto:[201]pasik@xxxxxx
> > 49.
> [202]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 50.
>
> [203]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 51. mailto:[204]pasik@xxxxxx
> > 52. mailto:[205]pasik@xxxxxx
> > 53.
> [206]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 54.
>
> [207]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 55. mailto:[208]pasik@xxxxxx
> > 56.
> [209]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 57.
>
> [210]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 58. mailto:[211]pasik@xxxxxx
> > 59. mailto:[212]pasik@xxxxxx
> > 60. mailto:[213]pasik@xxxxxx
> > 61. mailto:[214]pasik@xxxxxx
> > 62. mailto:[215]pasik@xxxxxx
> > 63. mailto:[216]pasik@xxxxxx
> > 64.
> [217]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 65.
>
> [218]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 66. mailto:[219]pasik@xxxxxx
> > 67.
> [220]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 68.
>
> [221]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 69. mailto:[222]pasik@xxxxxx
> > 70. mailto:[223]pasik@xxxxxx
> > 71.
> [224]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 72.
>
> [225]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 73. mailto:[226]pasik@xxxxxx
> > 74.
> [227]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 75.
>
> [228]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 76. mailto:[229]pasik@xxxxxx
> > 77. mailto:[230]pasik@xxxxxx
> > 78. mailto:[231]pasik@xxxxxx
> > 79. mailto:[232]pasik@xxxxxx
> > 80. mailto:[233]pasik@xxxxxx
> > 81. mailto:[234]pasik@xxxxxx
> > 82. mailto:[235]pasik@xxxxxx
> > 83. mailto:[236]pasik@xxxxxx
> > 84.
> [237]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 85.
>
> [238]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 86. mailto:[239]pasik@xxxxxx
> > 87.
> [240]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 88.
>
> [241]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 89. mailto:[242]pasik@xxxxxx
> > 90. mailto:[243]pasik@xxxxxx
> > 91.
> [244]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 92.
>
> [245]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 93. mailto:[246]pasik@xxxxxx
> > 94.
> [247]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 95.
>
> [248]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 96. mailto:[249]pasik@xxxxxx
> > 97. mailto:[250]pasik@xxxxxx
> > 98. mailto:[251]pasik@xxxxxx
> > 99. mailto:[252]pasik@xxxxxx
> > 100. mailto:[253]pasik@xxxxxx
> > 101. mailto:[254]pasik@xxxxxx
> > 102.
> [255]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 103.
>
> [256]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 104. mailto:[257]pasik@xxxxxx
> > 105.
> [258]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 106.
>
> [259]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 107. mailto:[260]pasik@xxxxxx
> > 108. mailto:[261]pasik@xxxxxx
> > 109.
> [262]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 110.
>
> [263]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 111. mailto:[264]pasik@xxxxxx
> > 112.
> [265]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 113.
>
> [266]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 114. mailto:[267]pasik@xxxxxx
> > 115. mailto:[268]pasik@xxxxxx
> > 116. mailto:[269]pasik@xxxxxx
> > 117. mailto:[270]pasik@xxxxxx
> > 118. mailto:[271]pasik@xxxxxx
> > 119. mailto:[272]pasik@xxxxxx
> > 120. mailto:[273]pasik@xxxxxx
> > 121.
> [274]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 122.
>
> [275]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 123. mailto:[276]pasik@xxxxxx
> > 124.
> [277]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 125.
>
> [278]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 126. mailto:[279]pasik@xxxxxx
> > 127. mailto:[280]pasik@xxxxxx
> > 128.
> [281]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 129.
>
> [282]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 130. mailto:[283]pasik@xxxxxx
> > 131.
> [284]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 132.
>
> [285]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 133. mailto:[286]pasik@xxxxxx
> > 134. mailto:[287]pasik@xxxxxx
> > 135. mailto:[288]pasik@xxxxxx
> > 136. mailto:[289]pasik@xxxxxx
> > 137. mailto:[290]pasik@xxxxxx
> > 138. mailto:[291]pasik@xxxxxx
> > 139.
> [292]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 140.
>
> [293]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 141. mailto:[294]pasik@xxxxxx
> > 142.
> [295]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 143.
>
> [296]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 144. mailto:[297]pasik@xxxxxx
> > 145. mailto:[298]pasik@xxxxxx
> > 146.
> [299]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 147.
>
> [300]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 148. mailto:[301]pasik@xxxxxx
> > 149.
> [302]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 150.
>
> [303]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> > 151. mailto:[304]pasik@xxxxxx
>
> References
>
> Visible links
> 1. mailto:pasik@xxxxxx
> 2. http://wiki.xensource.com/xenwiki/XenParavirtOps
> 3. mailto:pasik@xxxxxx
> 4. mailto:pasik@xxxxxx
> 5. mailto:pasik@xxxxxx
> 6. mailto:pasik@xxxxxx
> 7. mailto:pasik@xxxxxx
> 8. mailto:pasik@xxxxxx
> 9. mailto:pasik@xxxxxx
> 10. mailto:pasik@xxxxxx
> 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 12.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 13. mailto:pasik@xxxxxx
> 14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 15.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 16. mailto:pasik@xxxxxx
> 17. mailto:pasik@xxxxxx
> 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 19.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 20. mailto:pasik@xxxxxx
> 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 22.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 23. mailto:pasik@xxxxxx
> 24. mailto:pasik@xxxxxx
> 25. mailto:pasik@xxxxxx
> 26. mailto:pasik@xxxxxx
> 27. mailto:pasik@xxxxxx
> 28. mailto:pasik@xxxxxx
> 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 30.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 31. mailto:pasik@xxxxxx
> 32. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 33.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 34. mailto:pasik@xxxxxx
> 35. mailto:pasik@xxxxxx
> 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 37.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 38. mailto:pasik@xxxxxx
> 39. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 40.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 41. mailto:pasik@xxxxxx
> 42. mailto:pasik@xxxxxx
> 43. mailto:pasik@xxxxxx
> 44. mailto:pasik@xxxxxx
> 45. mailto:pasik@xxxxxx
> 46. mailto:pasik@xxxxxx
> 47. mailto:pasik@xxxxxx
> 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 49.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 50. mailto:pasik@xxxxxx
> 51. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 52.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 53. mailto:pasik@xxxxxx
> 54. mailto:pasik@xxxxxx
> 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 56.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 57. mailto:pasik@xxxxxx
> 58. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 59.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 60. mailto:pasik@xxxxxx
> 61. mailto:pasik@xxxxxx
> 62. mailto:pasik@xxxxxx
> 63. mailto:pasik@xxxxxx
> 64. mailto:pasik@xxxxxx
> 65. mailto:pasik@xxxxxx
> 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 67.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 68. mailto:pasik@xxxxxx
> 69. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 70.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 71. mailto:pasik@xxxxxx
> 72. mailto:pasik@xxxxxx
> 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 74.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 75. mailto:pasik@xxxxxx
> 76. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 77.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 78. mailto:pasik@xxxxxx
> 79. mailto:pasik@xxxxxx
> 80. mailto:pasik@xxxxxx
> 81. mailto:pasik@xxxxxx
> 82. mailto:pasik@xxxxxx
> 83. mailto:pasik@xxxxxx
> 84. mailto:pasik@xxxxxx
> 85. mailto:pasik@xxxxxx
> 86. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 87.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 88. mailto:pasik@xxxxxx
> 89. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 90.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 91. mailto:pasik@xxxxxx
> 92. mailto:pasik@xxxxxx
> 93. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 94.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 95. mailto:pasik@xxxxxx
> 96. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 97.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 98. mailto:pasik@xxxxxx
> 99. mailto:pasik@xxxxxx
> 100. mailto:pasik@xxxxxx
> 101. mailto:pasik@xxxxxx
> 102. mailto:pasik@xxxxxx
> 103. mailto:pasik@xxxxxx
> 104. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 105.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 106. mailto:pasik@xxxxxx
> 107. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 108.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 109. mailto:pasik@xxxxxx
> 110. mailto:pasik@xxxxxx
> 111. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 112.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 113. mailto:pasik@xxxxxx
> 114. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 115.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 116. mailto:pasik@xxxxxx
> 117. mailto:pasik@xxxxxx
> 118. mailto:pasik@xxxxxx
> 119. mailto:pasik@xxxxxx
> 120. mailto:pasik@xxxxxx
> 121. mailto:pasik@xxxxxx
> 122. mailto:pasik@xxxxxx
> 123. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 124.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 125. mailto:pasik@xxxxxx
> 126. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 127.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 128. mailto:pasik@xxxxxx
> 129. mailto:pasik@xxxxxx
> 130. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 131.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 132. mailto:pasik@xxxxxx
> 133. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 134.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 135. mailto:pasik@xxxxxx
> 136. mailto:pasik@xxxxxx
> 137. mailto:pasik@xxxxxx
> 138. mailto:pasik@xxxxxx
> 139. mailto:pasik@xxxxxx
> 140. mailto:pasik@xxxxxx
> 141. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 142.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 143. mailto:pasik@xxxxxx
> 144. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 145.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 146. mailto:pasik@xxxxxx
> 147. mailto:pasik@xxxxxx
> 148. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 149.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 150. mailto:pasik@xxxxxx
> 151. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 152.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 153. mailto:pasik@xxxxxx
> 154. mailto:pasik@xxxxxx
> 155. mailto:pasik@xxxxxx
> 156. mailto:pasik@xxxxxx
> 157. mailto:pasik@xxxxxx
> 158. mailto:pasik@xxxxxx
> 159. mailto:pasik@xxxxxx
> 160. mailto:pasik@xxxxxx
> 161. mailto:pasik@xxxxxx
> 162. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 163.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 164. mailto:pasik@xxxxxx
> 165. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 166.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 167. mailto:pasik@xxxxxx
> 168. mailto:pasik@xxxxxx
> 169. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 170.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 171. mailto:pasik@xxxxxx
> 172. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 173.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 174. mailto:pasik@xxxxxx
> 175. mailto:pasik@xxxxxx
> 176. mailto:pasik@xxxxxx
> 177. mailto:pasik@xxxxxx
> 178. mailto:pasik@xxxxxx
> 179. mailto:pasik@xxxxxx
> 180. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 181.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 182. mailto:pasik@xxxxxx
> 183. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 184.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 185. mailto:pasik@xxxxxx
> 186. mailto:pasik@xxxxxx
> 187. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 188.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 189. mailto:pasik@xxxxxx
> 190. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 191.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 192. mailto:pasik@xxxxxx
> 193. mailto:pasik@xxxxxx
> 194. mailto:pasik@xxxxxx
> 195. mailto:pasik@xxxxxx
> 196. mailto:pasik@xxxxxx
> 197. mailto:pasik@xxxxxx
> 198. mailto:pasik@xxxxxx
> 199. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 200.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 201. mailto:pasik@xxxxxx
> 202. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 203.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 204. mailto:pasik@xxxxxx
> 205. mailto:pasik@xxxxxx
> 206. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 207.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 208. mailto:pasik@xxxxxx
> 209. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 210.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 211. mailto:pasik@xxxxxx
> 212. mailto:pasik@xxxxxx
> 213. mailto:pasik@xxxxxx
> 214. mailto:pasik@xxxxxx
> 215. mailto:pasik@xxxxxx
> 216. mailto:pasik@xxxxxx
> 217. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 218.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 219. mailto:pasik@xxxxxx
> 220. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 221.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 222. mailto:pasik@xxxxxx
> 223. mailto:pasik@xxxxxx
> 224. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 225.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 226. mailto:pasik@xxxxxx
> 227. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 228.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 229. mailto:pasik@xxxxxx
> 230. mailto:pasik@xxxxxx
> 231. mailto:pasik@xxxxxx
> 232. mailto:pasik@xxxxxx
> 233. mailto:pasik@xxxxxx
> 234. mailto:pasik@xxxxxx
> 235. mailto:pasik@xxxxxx
> 236. mailto:pasik@xxxxxx
> 237. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 238.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 239. mailto:pasik@xxxxxx
> 240. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 241.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 242. mailto:pasik@xxxxxx
> 243. mailto:pasik@xxxxxx
> 244. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 245.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 246. mailto:pasik@xxxxxx
> 247. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 248.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 249. mailto:pasik@xxxxxx
> 250. mailto:pasik@xxxxxx
> 251. mailto:pasik@xxxxxx
> 252. mailto:pasik@xxxxxx
> 253. mailto:pasik@xxxxxx
> 254. mailto:pasik@xxxxxx
> 255. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 256.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 257. mailto:pasik@xxxxxx
> 258. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 259.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 260. mailto:pasik@xxxxxx
> 261. mailto:pasik@xxxxxx
> 262. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 263.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 264. mailto:pasik@xxxxxx
> 265. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 266.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 267. mailto:pasik@xxxxxx
> 268. mailto:pasik@xxxxxx
> 269. mailto:pasik@xxxxxx
> 270. mailto:pasik@xxxxxx
> 271. mailto:pasik@xxxxxx
> 272. mailto:pasik@xxxxxx
> 273. mailto:pasik@xxxxxx
> 274. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 275.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 276. mailto:pasik@xxxxxx
> 277. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 278.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 279. mailto:pasik@xxxxxx
> 280. mailto:pasik@xxxxxx
> 281. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 282.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 283. mailto:pasik@xxxxxx
> 284. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 285.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 286. mailto:pasik@xxxxxx
> 287. mailto:pasik@xxxxxx
> 288. mailto:pasik@xxxxxx
> 289. mailto:pasik@xxxxxx
> 290. mailto:pasik@xxxxxx
> 291. mailto:pasik@xxxxxx
> 292. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 293.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 294. mailto:pasik@xxxxxx
> 295. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 296.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 297. mailto:pasik@xxxxxx
> 298. mailto:pasik@xxxxxx
> 299. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 300.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 301. mailto:pasik@xxxxxx
> 302. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 303.
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
> 304. mailto:pasik@xxxxxx
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home