Hi
all;
I
tried again, and WinXP/Xen and Win2003/Xen say now the network card is Realtek
8029, whose driver can be downloaded on the web with the inf file. However,
this file didn’t work. (I also must say that WinVista says the most appropriate
network driver is the Realtek 8139C+, which does not work well.)
I
also tried to copy again from Win2003 the inf files for the RRL8139.sys. Nevertheless,
it does not work. The message is again “The newest driver is installed (Realtek
8139C+)”
I’m
not sure why model=ne2k_pci is not detected as a Novell’s driver nor any
other options such as model=pcnet. (how many drivers do xen support as the
network card?)
According
to
http://lists.xensource.com/archives/html/xen-devel/2006-12/msg01080.html
(which
Jun must have pointed out) “Ian Pratt” could answer to my question.
I
wish there will come some additional comments…
Makoto
Sakurai
From: Artur
Linhart - Linux communication [mailto:AL.LINUX@xxxxxxxxxxx]
Sent: Friday, April 27, 2007 9:18 PM
To: 'Makoto Sakurai'; 'Nakajima, Jun'; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Network configuration error in Windows
VistaBusinessHVM / Xen 3.04
Hi,
What do You think about the using the second possibility of NIC hardware for
DomU – the NE2000 compatible card/driver? Maybe this will work... You
must just define Your virtual network interface in your DomU configuration file
with the „model“ switch similary to the line
vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci'
]
And this should bring the different HW to Windows guest – and NE2000 compatible
cards could/should be supported more than the realtec...
Good luck, Archie.
From:
xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Makoto
Sakurai
Sent: Thursday, April 26, 2007 6:04 PM
To: 'Nakajima, Jun'; xen-users@xxxxxxxxxxxxxxxxxxx
Cc: 'Makoto Sakurai'
Subject: RE: [Xen-users] Network configuration error in Windows
VistaBusinessHVM / Xen 3.04
Hi Jun,
Sorry for the late reply. I tried to
copy the Realtek driver from the Windows 2003 / Xen HVM. However, it did not
work. It is because the version of the Realtek driver installed in Windows 2003
Server was older than that of Windows Vista Business. Moreover, I could not
find out which files / directories are appropriate for the whole copying from
Win2003 to WinVista. I just copied RTL8139.sys from
c:\Windows\System32/drivers.
Is there any advice for me?
Makoto Sakurai
From:
Nakajima, Jun [mailto:jun.nakajima@xxxxxxxxx]
Sent: Monday, April 09, 2007 11:40 PM
To: Makoto Sakurai; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Network configulation error in Windows Vista
BusinessHVM / Xen 3.04
That’s a known problem. Can you try
the driver from Windows 2003? The driver on the X64 seems to be working fine,
though.
Jun
---
Intel Open Source Technology Center
From:
xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Makoto
Sakurai
Sent: Saturday, April 07, 2007 6:18 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Cc: 'Makoto Sakurai'
Subject: [Xen-users] Network configulation error in Windows Vista
BusinessHVM / Xen 3.04
Dear all;
I am trying to set up the Windows Vista Business of
Japanese version on the Fedora Core 7 test 3, which has the rpm version of
xen-3.0.4-9.fc7. I have a success to install the Windows HVM with Pentium D 750
CPU. However, I cannot configure the network, which can be worked for the
Windows XP / Xen. My network card is on board card of Gigabyte GA-8I945G-MBX motherboard,
that is recognized as the eth0.
When we checked the bridge, we have the following
message;
[root@localhost makoto]# /usr/sbin/brctl show xenbr0
bridge name bridge id STP enabled interfaces
virbr0 8000.000000000000 no
xenbr0 8000.feffffffffff no peth0
vif0.0
peth0 is recognized as the Intel Corporation 82573V
Gigabit Ethernet Controller (Copper) card under the Gnome network
configulation.
After downloading the Realtek driver, I can improved
the network status as “local and internet”; however, the network is
still “unrecognized network”, which I do not know why?
Is there anyone who have tried to install the Windows
Vista and which is successful?
I would appreciate if you would give me some advice.
Best wishes,
Makoto Sakurai
__________ Informace od NOD32 2221 (20070426) __________
Tato zprava byla proverena antivirovym systemem NOD32.
http://www.nod32.cz
Home