I am attempting a Centos 4.4 Dom0 LVM setup on a regular IBM desktop w
IDE disks. Has anyone gotten this working??
I made the OS install on LVM (VolGroup00), upgraded the kernel to latest
2.6.9-42.0.3.EL, then installed:
kernel-xen-2.6.16.33-3.0.4.1.i386.rpm
xen-3.0.4.1-1.i386.rpm
xen-devel-3.0.4.1-1.i386.rpm
depmod /lib/modules/2.6.16.33-xen_3.0.4.1
mkinitrd /boot/initrd-2.6-xen-cust.img 2.6.16.33-xen_3.0.4.1
mv /lib/tls /lib/tls.disabled
Here is relevant grub.conf:
title Xen 3.0 / XenLinux 2.6
root (hd0,0)
kernel /xen-3.0.gz dom0_mem=262144 com1=115200,8n1 noreboot
module /vmlinuz-2.6-xen root=/dev/VolGroup00/LogVol00 ro
console=ttyS0,115200
module /initrd-2.6.9-42.0.3.EL.img
title CentOS (2.6.9-42.0.3.EL)
root (hd0,0)
kernel /vmlinuz-2.6.9-42.0.3.EL ro root=/dev/VolGroup00/LogVol00
rhgb quiet
initrd /initrd-2.6.9-42.0.3.EL.img
Here is the entire boot log from the serial console (sorry it's so long,
I didn't want to miss anything)
Thanks in advance to anyone who can help!
-Trevor
===================================================
Booting 'Xen 3.0 / XenLinux 2.6'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83 kernel /xen-3.0.gz
dom0_mem=262144 com1=115200,8n1 noreboot
[Multiboot-elf, <0x100000:0x8c6e4:0x5191c>, shtab=0x1de078,
entry=0x100000] module /vmlinuz-2.6-xen root=/dev/VolGroup00/LogVol00 ro
console=ttyS0,115200
[Multiboot-module @ 0x1df000, 0x2ef074 bytes] module
/initrd-2.6-xen-trev.img
[Multiboot-module @ 0x4cf000, 0x21c800 bytes]
__ __ _____ ___ _ _ _
\ \/ /___ _ __ |___ / / _ \| || | / |
\ // _ \ '_ \ |_ \| | | | || |_ | |
/ \ __/ | | | ___) | |_| |__ _|| |
/_/\_\___|_| |_| |____(_)___(_) |_|(_)_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0.4.1 (avsm@xxxxxxxxxxxxxxxx) (gcc version 3.4.6 20060404
(Red Ha t 3.4.6-3)) Fri Jan 5 10:40:19 EST 2007 Latest ChangeSet:
unavailable
(XEN) Command line: /xen-3.0.gz dom0_mem=262144 com1=115200,8n1 noreboot
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000ca000 - 00000000000cc000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000002f770000 (usable)
(XEN) 000000002f770000 - 000000002f77a000 (ACPI data)
(XEN) 000000002f77a000 - 000000002f780000 (ACPI NVS)
(XEN) 000000002f780000 - 0000000030000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) System RAM: 759MB (777276kB)
(XEN) ACPI: RSDP (v000 PTLTD ) @
0x000f6660
(XEN) ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @
0x2f775259
(XEN) ACPI: FADT (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @
0x2f779e9d
(XEN) ACPI: TCPA (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @
0x2f779f11
(XEN) ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @
0x2f779f43
(XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @
0x2f779fa1
(XEN) ACPI: SSDT (v001 PTLTD ACPIHT 0x060400d0 LTP 0x00000001) @
0x2f779fc9
(XEN) ACPI: DSDT (v001 IBM THINKCEN 0x060400d0 MSFT 0x0100000e) @
0x00000000
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000002f770000
(XEN) Domain heap initialised: DMA width 30 bits
(XEN) Xen heap: 10MB (10348kB)
(XEN) PAE enabled, limit: 16 GB
(XEN) found SMP MP-table at 000f65b0
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:3 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 15:3 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2992.842 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
(XEN) CPU0: Thermal monitoring enabled
(XEN) CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
(XEN) Mapping cpu 0 to node 255
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) Mapping cpu 1 to node 255
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
(XEN) CPU1: Thermal monitoring enabled
(XEN) CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... works.
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000001800000->0000000002000000 (63488 pages to
be allo
cated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04482bc
(XEN) Init. ramdisk: c0449000->c0665800
(XEN) Phys-Mach map: c0666000->c06a6000
(XEN) Start info: c06a6000->c06a646c
(XEN) Page tables: c06a7000->c06b0000
(XEN) Boot stack: c06b0000->c06b1000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initrd len 0x21c800, start at 0xc0449000
(XEN) Scrubbing Free RAM: .....done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen ).
Linux version 2.6.16.33-xen_3.0.4.1 (root@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc
version
3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Jan 5 10:40:15 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable) 0MB HIGHMEM
available.
264MB LOWMEM available.
found SMP MP-table at 000f65b0
DMI present.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling
APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP
configuration information Allocating PCI resources starting at 40000000
(gap: 30000000:cec00000) Built 1 zonelists Kernel command line:
root=/dev/VolGroup00/LogVol00 ro console=ttyS0,115200 Enabling fast FPU
save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes) Xen reported:
2992.842 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Software
IO TLB enabled:
Aperture: 2 megabytes
Kernel range: 0x00000000c06b4000 - 0x00000000c08b4000 Address size: 30
bits vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
Memory: 249728k/270336k available (2004k kernel code, 12060k reserved,
758k data , 192k init, 0k highmem) Checking if this processor honours
the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5988.70 BogoMIPS
(lpj=29943526) Security Framework v1.0.0 initialized Capability LSM
initialized Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
(XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0
(XEN) ioapic_guest_write: old_entry=00010000, new_entry=000009f0
(XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!
Enabling SMP...
Brought up 2 CPUs
Initializing CPU#1
migration_cost=12
checking if image is initramfs... it is
Freeing initrd memory: 2162k freed
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI Error (evgpeblk-0284): Unknown GPE method type: NFPB (name not of
form _Lxx or _Exx) [20060127]
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk:
region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15) Linux
Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 13 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: e8100000-e81fffff
PREFETCH window: disabled.
Simple Boot Flag at 0x35 set to 0x1
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1169663297.260:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing
Cryptographic API io scheduler noop registered io scheduler anticipatory
registered io scheduler deadline registered io scheduler cfq registered
(default)
PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1 Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16
RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as ttyS0 Event-channel device
installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP
established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind
hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384) TCP reno
registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 192k freed Red Hat nash version 4.2.1.8
starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting
udev
input: AT Translated Set 2 keyboard as /class/input/input0 Loading
ide-disk.ko module
ide_disk: no version for "struct_module" found: kernel tainted.
Loading dm-mod.ko module
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
Loading jbd.ko module Loading ext3.ko module Loading dm-mirror.ko module
Loading dm-zero.ko module Loading dm-snapshot.ko module Making
device-mapper control node Scanning logical volumes
Reading all physical volumes. This may take a while...
No volume groups found
Activating logical volumes
Volume group "VolGroup00" not found
ERROR: /bin/lvm exited abnormally! (pid 824) Creating root device
Mounting root filesystem
mount: error 6 mounting ext3
mount: error 2 mounting none
Switching to new root
switchroot: mount failed: 22
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init!
(XEN) Domain 0 crashed: 'noreboot' set - not rebooting.
====================================================================
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home