Re: [Xen-devel] virtual domain partial boot then crash

[Mike Wright <mike-1@xxxxxxxxxx>]

<snip />

*** WHAT I HAD TO DO TO MAKE MY NEW REDHAT BE A GOOD GUEST ***

Apologies, but I didn't know how to cross reference this to something else; the 
information may be more useful under a different subject heading.

After having enjoyed the CD, and tried many experiments in the following days 
trying to get the CD stuff to play off the hard drive I learned the very hard 
way:  It's very doable but requires a very high level of understanding of very 
low level things.  PLEASE, save yourself alot of effort and download the 
bitkeeper software, retrieve and build xeno-1.1.bk, install it and go from 
there.  You'll live longer.

Caveat:
 the redhat9 used here was built from iso images downloaded from the redhat site.  there were no 
special configurations done other than installation of java and ant for the (soon to be obsolete) 
tools.  During installation I specified the network parameters and answered "Yes" to 
firewalling with "Medium security".  (iptables expert I'm not; I use the configs as 
examples)

Assumption:
 1) you have redhat9 installation on disk which has the new xen and xenolinux 
kernels and must successfully be able to boot into it.
 2) you have a spare partition in which you have installed another redhat.

Boot into the new (soon to be guest) installation and login.

Run /sbin/chkconfig --list | grep ":on" to see what is running.  Using 
/sbin/chkconfig --level turn off the hardware dependent and X stuff such as xfs, gpm, 
keytables, and especially iptables,  __in level 4__.  Don't lock yourself out with your 
own rules.  You can always turn iptables back on.

Edit /etc/fstab and remove any incorrect swaps (redhat loves to include them 
all) and make sure you and it know where your mount points are.

Edit /dev/rc.d/rc.sysinit and find the line with /sbin/hwclock and comment it out.  (I 
like to add the word "NOT" to the second line down that reports the status of 
that.  Makes me happy.

Using your magic:  find a copy of /lib/modules/2.4.22-xeno and cp it to your 
guest's /lib/modules directory.

Lastly, edit /etc/inittab and change the initdefault to 4, go down to the 
mingettys area and remove the runlevels for 45, go to the bottom and comment 
out the x:5:... line.

Note** after those last steps you can still boot; you just won't be able to 
talk to it from the console.

Type reboot; wait; come up in your domain0 and your new guest should be 
available for booting from the host.

The new domain should be useable from the command line instructions available 
in the READMEs.

Using these rules I can install from CD and modify, ready to boot, a guest in 
about 10 minutes.

Hope this is useful to somebody.

Mike Wright



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel