WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-devel] Re: [Xen-users] XEN 4.1.1 + IGD passthrough and Intel DQ

On Sat, Aug 27, 2011 at 08:51:40PM +0200, Erik Lind wrote:
> Hi Pasi,
> and thank you for your reply.
> 
> Currently I use Debian squeeze as Dom0,
> I use a kernel from the devel/xen-pciback-0.6.1 branch at
> git.kernel.org/?p=linux/kernel/git/konrad/xen.git. It is a 3.0.0-rc4
> based kernel.
> 
> I have been trying for the last day to get some other Dom0 kernel to
> work but I have so far been unable to get the pciback module to work
> on those kernels (such as the master branch or stable/2.6.39.x). I
> do prefer a fairly late kernel to get problem support for the
> motherboard and cpu.

Um, try the #master brach - it has been updated to 3.0.3.

But the problem is likely not with the kernel - but rather with the
QEMU toolstack. I should one of these days try to pass in some form
of video card to see how it fares.

> 
> I have been using a few different Intel drivers, the ones included
> in Windows 7 which are from March and newer ones ( from mid August)
> but with the same result.
> 
> I have been trying with a few different boot options, but the last
> try was with the most basic configuration possible. (included as
> grub.conf.gz)
> 
> Also included is the somewhat messy vm config file, xen_htpc1.cfg.gz
> 
> I have included startup logs for two different runs, one with
> Windows standard vga drivers (taged with svga_) and with Intel
> drivers (taged with intel_). Not sure if that gives any further
> clues.
> 
> I also added info from lspci -vv.
> 
> /Erik
> 
> On 08/26/2011 03:31 PM, Pasi Kärkkäinen wrote:
> >On Sat, Aug 20, 2011 at 01:59:07PM +0200, Erik Lind wrote:
> >>Hi
> >>
> >Hi,
> >
> >added xen-devel to cc.
> >
> >>I'm running XEN 4.1.1 (have tested 4.2 unstable too) and I'm trying to
> >>do graphics passthrough of my on board/chip GPU.
> >>
> >What distro is dom0? and what dom0 kernel?
> >
> >>I have been struggling for quite some time without success.
> >>
> >>Passthrough as such does work but when loading the proper drivers for
> >>the GPU it does not, and then Windows just stops loading.
> >>
> >What version of Intel gfx drivers?
> >
> >
> >>First attempt was to use Windows 7, I did try both 32 and 64 bit
> >>versions and it did not work.
> >>
> >>Then I did an attempt with XP 32bit and to much surprise it did work (at
> >>least it starts up properly haven't tested it that much yet).
> >>
> >>After that I tried with Vista 32 bit, just to see, and it did not work.
> >>
> >>In short I suppose there is some issue with the gfx drivers for Vista
> >>and Windows 7 or possibly there is some other difference between the
> >>OS:es. Or is it just something else that I'm missing?
> >>
> >>Has anyone been able to get XEN and IGD passthrough to work with proper
> >>drivers in Windows 7 and fairly new HW? Any suggestions how to proceed
> >>with troubleshooting?
> >>
> >>Thanks in advance
> >>
> >Please also post your grub.conf entry and /etc/xen/<vm>  cfgfile!
> >
> >-- Pasi
> >
> >
> 










> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel