|   | 
      | 
  
  
      | 
      | 
  
 
     | 
    | 
  
  
     | 
    | 
  
  
    |   | 
      | 
  
  
    | 
         
xen-users
[Xen-users] XenSerialConsole help + GRUB2 (Machine locks up on boot)
 
Hello,
  I am trying to setup a Xen serial console for
easily debugging the full kernel boot messages even if it crashes with
the help from the following wiki pages:
 
  http://wiki.xensource.com/xenwiki/XenSerialConsole http://wiki.xensource.com/xenwiki/XenParavirtOps
 
  I
noticed the wiki was written for use with grub legacy. Therefore I am
not certain if the serial console issue is with the way the grub2
package implemented serial consoles. 
 
  My problem is the machine locks up on boot after printing the messages: 
 
    (XEN) Xen trace buffers: disabled     (XEN) Std. Loglevel: All     (XEN) Guest Loglevel: All     (XEN) **********************************************     (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS     (XEN) ******* This option is intended to aid debugging of Xen by ensuring     (XEN) ******* that all output is synchronously delivered on the serial line.     (XEN) ******* However it can introduce SIGNIFICANT latencies and affect     (XEN) ******* timekeeping. It is NOT recommended for production use!     (XEN) **********************************************     (XEN) 3... 2... 1... 
  
 
After that I just get a blank screen with a blinking "_" prompt at the
top left hand corner of the screen. I understand that this message
should not alone cause the kernel to stop booting at the output was
actually found on another thread at: http://lists.xensource.com/archives/html/xen-devel/2010-04/msg00340.html
 
  Does
any have a non-standard PCI serial port Xen serial console working with
grub2? What does your /etc/default/grub file and menuentrys look like?
What does your /etc/inittab look like?
 
  My motherboard does
not have a serial port or even serial headers connectors on the board.
Therefor I purchased an add-in serial card to obtain serial ports on
the machine.
 
  Motherboard: http://www.intel.com/products/desktop/motherboards/DP55WG/DP55WG-overview.htm http://ark.intel.com/Product.aspx?id=40078
  Add-in serial card: "Cables Unlimited IOC-2200 2-Port DB9 Serial PCI I/O Card" (http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=1431863&CatId=1422)
 
  My GRUB2 configuration files are also attached from:
  /etc/default/grub /boot/grub/grub.cfg (trying to boot "Setting up Xen 4.0.0 / PVOPS 2.6.32-4-xen-amd64 with a serial console" entry)
 
  Lastly a snippet from lspci -vvv
  05:01.0 Serial controller: NetMos Technology Device 9865 (prog-if 02 [16550])     Subsystem: Device a000:1000     Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Interrupt: pin A routed to IRQ 22     Region 0: I/O ports at 1008 [size=8]     Region 1: Memory at f0007000 (32-bit, non-prefetchable) [size=4K]     Region 4: Memory at f0006000 (32-bit, non-prefetchable) [size=4K]     Capabilities: [48] Power Management version 2         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)         Status: D0 PME-Enable- DSel=0 DScale=1 PME-
  05:01.1 Serial controller: NetMos Technology Device 9865 (prog-if 02 [16550])     Subsystem: Device a000:1000     Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Interrupt: pin B routed to IRQ 21     Region 0: I/O ports at 1000 [size=8]     Region 1: Memory at f0005000 (32-bit, non-prefetchable) [size=4K]     Region 4: Memory at f0004000 (32-bit, non-prefetchable) [size=4K]     Capabilities: [48] Power Management version 2         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)         Status: D0 PME-Enable- DSel=0 DScale=1 PME-  
  Thanks for looking!
  
-M
   		 	   		  
  Got a phone?  Get Hotmail & Messenger for mobile!
 |   
 
grub.cfg 
Description: Binary data 
 
grub 
Description: Binary data 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users 
 |   
 
| <Prev in Thread] | 
Current Thread | 
[Next in Thread>
 |  
- [Xen-users] XenSerialConsole help + GRUB2 (Machine locks up on boot),
Mike Viau <=
 
 
 |  
  
 | 
    | 
  
  
    |   | 
    |