>-----Original Message-----
>From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
>[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Liang Yang
>Sent: 2006年9月12日 8:57
>To: xen-users@xxxxxxxxxxxxxxxxxxx
>Subject: [Xen-users] Help: Xen HVM Domain can ONLY support four hard
>drivesat most???
>
>Hi,
>
>I have 5 SATA hard drives and I want to expose all these five drives to
>Windows HVM domain (domain name: w2k3-001) from dom0. Here is the
>related
>setting in my Windows config file:
>disk = ['phy:/dev/VG_Dom3_Windows/w2k3-001,ioemu:hda,w',
>'phy:/dev/sde,ioemu:hdb,w', 'phy:/dev/sdf,ioemu:hdc,w',
>'phy:/dev/sdg,ioemu:hdd,w', 'phy:/dev/sdh,ioemu:hde,w' ]
>
>When I start Windows domain, I got the following error:
>Error: hvm: for qemu vbd type=file&dev=hda~hdd
Em. The error should mean you can only use had~hdd for ioemu. hde+ is for vbd.
You can have a try with:
disk = ['phy:/dev/VG_Dom3_Windows/w2k3-001,ioemu:hda,w',
'phy:/dev/sde,ioemu:hdb,w', 'phy:/dev/sdf,ioemu:hdc,w',
'phy:/dev/sdg,ioemu:hdd,w', 'phy:/dev/sdh,hde,w' ]
Well, Windows doesn't support vbd yet. So you can not use more than 4 IDE disks
for Windows HVM.
>
>I then changed to the following format:
>disk = ['phy:/dev/VG_Dom3_Windows/w2k3-001,hda1,w',
>'phy:/dev/sde,hdb1,w',
>'phy:/dev/sdf,hdc1,w', 'phy:/dev/sdg,hdd1,w', 'phy:/dev/sdh,hde2,w' ]
>
This is not a correct usage for HVM. You can only use hda, hdb etc, but not
hda1, hdb1 etc.
>But the Windows domain console Windows does not show up after I typed "xm
>create w2k3.hvm -c" and I also got the following error:
I think your Windows doesn't open serial console output. So don't using "-c".
"xm create w2k3.hvm" is okay.
Best Regards,
Yongkang (Kangkang) 永康
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home