|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] CentOS routing table gone
Hello all,
I tried to install Xen on my CentOS server, and everything seems to go
right, but once I reboot, there is no default gateway for my network
connections, so I cannot connect in or out. That is all on dom0.
I spent about two hours in the centos channel to get this sorted out,
and all the scripts seem to be okay.
Note that the last line from netstat -rn was manually added via KVM by
me, so it doesn't appear when the system is rebooted.
Here is the output for netstat -rn ; ifconfig eth0 ; ifconfig eth1 ;
cat /etc/sysconfig/network ; cat
/etc/sysconfig/network-scripts/ifcfg-eth0 ; cat
/etc/sysconfig/network-scripts/ifcfg-eth1
[root@dhcp-123 xen]# netstat -rn ; ifconfig eth0 ; ifconfig eth1 ; cat
/etc/sysconfig/network ; cat /etc/sysconfig/network-scripts/ifcfg-eth0
; cat /etc/sysconfig/network-scripts/ifcfg-eth1
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
64.182.165.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
0.0.0.0 64.182.165.1 0.0.0.0 UG 0 0 0 eth0
eth0 Link encap:Ethernet HWaddr 00:E0:81:5D:C4:E4
inet addr:64.182.165.190 Bcast:64.182.165.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:81ff:fe5d:c4e4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3028 errors:0 dropped:0 overruns:0 frame:0
TX packets:171 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:207927 (203.0 KiB) TX bytes:27973 (27.3 KiB)
eth1 Link encap:Ethernet HWaddr 00:E0:81:5D:C4:E3
inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:81ff:fe5d:c4e3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2365 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:149737 (146.2 KiB) TX bytes:678 (678.0 b)
Interrupt:20 Base address:0x6000
NETWORKING=yes
HOSTNAME=dhcp-123.installer.lan
GATEWAY=64.182.165.1
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=64.182.165.190
NETMASK=255.255.255.0
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=static
IPADDR=10.0.0.1
NETMASK=255.255.255.0
Do you guys have any ideas?
Thanks!
Christoph
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] CentOS routing table gone,
Christoph Koehler <=
|
|
|
|
|