--- linux-2.6.12-xen0-arch.orig/include/asm-i386/floppy.h
+++ linux-2.6.12-xen0-arch/include/asm-i386/floppy.h
@@ -10,310 +10,6 @@
#ifndef __ASM_I386_FLOPPY_H
#define __ASM_I386_FLOPPY_H
-#include <linux/vmalloc.h>
-
-
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- */
-#define _CROSS_64KB(a,s,vdma) \
-(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
-
-#define SW fd_routine[use_virtual_dma&1]
-#define CSW fd_routine[can_use_virtual_dma & 1]
-
-
-#define fd_inb(port) inb_p(port)
-#define fd_outb(value,port) outb_p(value,port)
-
-#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
-#define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
-#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
-#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
-#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
-
-#define FLOPPY_CAN_FALLBACK_ON_NODMA
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_pdma;
-
-static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
-{
- register unsigned char st;
-
-#undef TRACE_FLPY_INT
-#define NO_FLOPPY_ASSEMBLER
-
-#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
-#endif
- if (!doing_pdma)
- return floppy_interrupt(irq, dev_id, regs);
-
-#ifdef TRACE_FLPY_INT
- if(!calls)
- bytes = virtual_dma_count;
-#endif
-
-#ifndef NO_FLOPPY_ASSEMBLER
- __asm__ (
- "testl %1,%1"
- "je 3f"
-"1: inb %w4,%b0"
- "andb $160,%b0"
- "cmpb $160,%b0"
- "jne 2f"
- "incw %w4"
- "testl %3,%3"
- "jne 4f"
- "inb %w4,%b0"
- "movb %0,(%2)"
- "jmp 5f"
-"4: movb (%2),%0"
- "outb %b0,%w4"
-"5: decw %w4"
- "outb %0,$0x80"
- "decl %1"
- "incl %2"
- "testl %1,%1"
- "jne 1b"
-"3: inb %w4,%b0"
-"2: "
- : "=a" ((char) st),
- "=c" ((long) virtual_dma_count),
- "=S" ((long) virtual_dma_addr)
- : "b" ((long) virtual_dma_mode),
- "d" ((short) virtual_dma_port+4),
- "1" ((long) virtual_dma_count),
- "2" ((long) virtual_dma_addr));
-#else
- {
- register int lcount;
- register char *lptr;
-
- st = 1;
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if(st != 0xa0)
- break;
- if(virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
- }
-#endif
-
-#ifdef TRACE_FLPY_INT
- calls++;
-#endif
- if(st == 0x20)
- return IRQ_HANDLED;
- if(!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
- virtual_dma_count, virtual_dma_residue, calls, bytes,
- dma_wait);
- calls = 0;
- dma_wait=0;
-#endif
- doing_pdma = 0;
- floppy_interrupt(irq, dev_id, regs);
- return IRQ_HANDLED;
- }
-#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
- dma_wait++;
-#endif
- return IRQ_HANDLED;
-}
-
-static void fd_disable_dma(void)
-{
- if(! (can_use_virtual_dma & 1))
- disable_dma(FLOPPY_DMA);
- doing_pdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
- return 0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
- if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
- else
- return request_irq(FLOPPY_IRQ, floppy_interrupt,
-
SA_INTERRUPT|SA_SAMPLE_RANDOM,
- "floppy", NULL);
-
-}
-
-static unsigned long dma_mem_alloc(unsigned long size)
-{
- return __get_dma_pages(GFP_KERNEL,get_order(size));
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
- return (unsigned long) vmalloc(size);
-
-}
-
-#define nodma_mem_alloc(size) vdma_mem_alloc(size)
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
- if((unsigned int) addr >= (unsigned int) high_memory)
- vfree((void *)addr);
- else
- free_pages(addr, get_order(size));
-}
-
-#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size)
-
-static void _fd_chose_dma_mode(char *addr, unsigned long size)
-{
- if(can_use_virtual_dma == 2) {
- if((unsigned int) addr >= (unsigned int) high_memory ||
- isa_virt_to_bus(addr) >= 0x1000000 ||
- _CROSS_64KB(addr, size, 0))
- use_virtual_dma = 1;
- else
- use_virtual_dma = 0;
- } else {
- use_virtual_dma = can_use_virtual_dma & 1;
- }
-}
-
-#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
-
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_pdma = 1;
- virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-#ifdef FLOPPY_SANITY_CHECK
- if (CROSS_64KB(addr, size)) {
- printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
- return -1;
- }
-#endif
- /* actual, physical DMA */
- doing_pdma = 0;
- clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr));
- set_dma_count(FLOPPY_DMA,size);
- enable_dma(FLOPPY_DMA);
- return 0;
-}
-
-static struct fd_routine_l {
- int (*_request_dma)(unsigned int dmanr, const char * device_id);
- void (*_free_dma)(unsigned int dmanr);
- int (*_get_dma_residue)(unsigned int dummy);
- unsigned long (*_dma_mem_alloc) (unsigned long size);
- int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-} fd_routine[] = {
- {
- request_dma,
- free_dma,
- get_dma_residue,
- dma_mem_alloc,
- hard_dma_setup
- },
- {
- vdma_request_dma,
- vdma_nop,
- vdma_get_dma_residue,
- vdma_mem_alloc,
- vdma_dma_setup
- }
-};
-
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
- * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
- * coincides with another rtc CMOS user. Paul G.
- */
-#define FLOPPY0_TYPE ({ \
- unsigned long flags; \
- unsigned char val; \
- spin_lock_irqsave(&rtc_lock, flags); \
- val = (CMOS_READ(0x10) >> 4) & 15; \
- spin_unlock_irqrestore(&rtc_lock, flags); \
- val; \
-})
-
-#define FLOPPY1_TYPE ({ \
- unsigned long flags; \
- unsigned char val; \
- spin_lock_irqsave(&rtc_lock, flags); \
- val = CMOS_READ(0x10) & 15; \
- spin_unlock_irqrestore(&rtc_lock, flags); \
- val; \
-})
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-#define FLOPPY_MOTOR_MASK 0xf0
-
-#define AUTO_DMA
-
-#define EXTRA_FLOPPY_PARAMS
+#include <mach_floppy.h>
#endif /* __ASM_I386_FLOPPY_H */
--- /dev/null
+++ linux-2.6.12-xen0-arch/include/asm-i386/mach-default/mach_floppy.h
@@ -0,0 +1,319 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_MACH_FLOPPY_H
+#define __ASM_MACH_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a,s,vdma) \
+(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma&1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port) inb_p(port)
+#define fd_outb(value,port) outb_p(value,port)
+
+#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
+#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_pdma;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+ register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+ static int calls=0;
+ static int bytes=0;
+ static int dma_wait=0;
+#endif
+ if (!doing_pdma)
+ return floppy_interrupt(irq, dev_id, regs);
+
+#ifdef TRACE_FLPY_INT
+ if(!calls)
+ bytes = virtual_dma_count;
+#endif
+
+#ifndef NO_FLOPPY_ASSEMBLER
+ __asm__ (
+ "testl %1,%1"
+ "je 3f"
+"1: inb %w4,%b0"
+ "andb $160,%b0"
+ "cmpb $160,%b0"
+ "jne 2f"
+ "incw %w4"
+ "testl %3,%3"
+ "jne 4f"
+ "inb %w4,%b0"
+ "movb %0,(%2)"
+ "jmp 5f"
+"4: movb (%2),%0"
+ "outb %b0,%w4"
+"5: decw %w4"
+ "outb %0,$0x80"
+ "decl %1"
+ "incl %2"
+ "testl %1,%1"
+ "jne 1b"
+"3: inb %w4,%b0"
+"2: "
+ : "=a" ((char) st),
+ "=c" ((long) virtual_dma_count),
+ "=S" ((long) virtual_dma_addr)
+ : "b" ((long) virtual_dma_mode),
+ "d" ((short) virtual_dma_port+4),
+ "1" ((long) virtual_dma_count),
+ "2" ((long) virtual_dma_addr));
+#else
+ {
+ register int lcount;
+ register char *lptr;
+
+ st = 1;
+ for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+ st=inb(virtual_dma_port+4) & 0xa0 ;
+ if(st != 0xa0)
+ break;
+ if(virtual_dma_mode)
+ outb_p(*lptr, virtual_dma_port+5);
+ else
+ *lptr = inb_p(virtual_dma_port+5);
+ }
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+ st = inb(virtual_dma_port+4);
+ }
+#endif
+
+#ifdef TRACE_FLPY_INT
+ calls++;
+#endif
+ if(st == 0x20)
+ return IRQ_HANDLED;
+ if(!(st & 0x20)) {
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+#ifdef TRACE_FLPY_INT
+ printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+ virtual_dma_count, virtual_dma_residue, calls, bytes,
+ dma_wait);
+ calls = 0;
+ dma_wait=0;
+#endif
+ doing_pdma = 0;
+ floppy_interrupt(irq, dev_id, regs);
+ return IRQ_HANDLED;
+ }
+#ifdef TRACE_FLPY_INT
+ if(!virtual_dma_count)
+ dma_wait++;
+#endif
+ return IRQ_HANDLED;
+}
+
+static void fd_disable_dma(void)
+{
+ if(! (can_use_virtual_dma & 1))
+ disable_dma(FLOPPY_DMA);
+ doing_pdma = 0;
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+ return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+ return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+ if(can_use_virtual_dma)
+ return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+ "floppy", NULL);
+ else
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+
SA_INTERRUPT|SA_SAMPLE_RANDOM,
+ "floppy", NULL);
+
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+ return __get_dma_pages(GFP_KERNEL,get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+ return (unsigned long) vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+ if((unsigned int) addr >= (unsigned int) high_memory)
+ vfree((void *)addr);
+ else
+ free_pages(addr, get_order(size));
+}
+
+#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size)
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+ if(can_use_virtual_dma == 2) {
+ if((unsigned int) addr >= (unsigned int) high_memory ||
+ isa_virt_to_bus(addr) >= 0x1000000 ||
+ _CROSS_64KB(addr, size, 0))
+ use_virtual_dma = 1;
+ else
+ use_virtual_dma = 0;
+ } else {
+ use_virtual_dma = can_use_virtual_dma & 1;
+ }
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+ doing_pdma = 1;
+ virtual_dma_port = io;
+ virtual_dma_mode = (mode == DMA_MODE_WRITE);
+ virtual_dma_addr = addr;
+ virtual_dma_count = size;
+ virtual_dma_residue = 0;
+ return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+ if (CROSS_64KB(addr, size)) {
+ printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+ return -1;
+ }
+#endif
+ /* actual, physical DMA */
+ doing_pdma = 0;
+ clear_dma_ff(FLOPPY_DMA);
+ set_dma_mode(FLOPPY_DMA,mode);
+ set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr));
+ set_dma_count(FLOPPY_DMA,size);
+ enable_dma(FLOPPY_DMA);
+ return 0;
+}
+
+static struct fd_routine_l {
+ int (*_request_dma)(unsigned int dmanr, const char * device_id);
+ void (*_free_dma)(unsigned int dmanr);
+ int (*_get_dma_residue)(unsigned int dummy);
+ unsigned long (*_dma_mem_alloc) (unsigned long size);
+ int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+ {
+ request_dma,
+ free_dma,
+ get_dma_residue,
+ dma_mem_alloc,
+ hard_dma_setup
+ },
+ {
+ vdma_request_dma,
+ vdma_nop,
+ vdma_get_dma_residue,
+ vdma_mem_alloc,
+ vdma_dma_setup
+ }
+};
+
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
+ * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
+ * coincides with another rtc CMOS user. Paul G.
+ */
+#define FLOPPY0_TYPE ({ \
+ unsigned long flags; \
+ unsigned char val; \
+ spin_lock_irqsave(&rtc_lock, flags); \
+ val = (CMOS_READ(0x10) >> 4) & 15; \
+ spin_unlock_irqrestore(&rtc_lock, flags); \
+ val; \
+})
+
+#define FLOPPY1_TYPE ({ \
+ unsigned long flags; \
+ unsigned char val; \
+ spin_lock_irqsave(&rtc_lock, flags); \
+ val = CMOS_READ(0x10) & 15; \
+ spin_unlock_irqrestore(&rtc_lock, flags); \
+ val; \
+})
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define AUTO_DMA
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_MACH_FLOPPY_H */
--- linux-2.6.12-xen0/include/asm-i386/mach-xen/mach_floppy.h 1969-12-31
16:00:00.000000000 -0800
+++ linux-2.6.12-xen0-arch/include/asm-i386/mach-xen/mach_floppy.h
2005-08-01 22:24:55.000000000 -0700
@@ -0,0 +1,147 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ *
+ * Modifications for Xen are Copyright (c) 2004, Keir Fraser.
+ */
+#ifndef __ASM_MACH_FLOPPY_H
+#define __ASM_MACH_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+/* XEN: Hit DMA paths on the head. This trick from asm-m68k/floppy.h. */
+#include <asm/dma.h>
+#undef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS 0
+#define CROSS_64KB(a,s) (0)
+
+#define fd_inb(port) inb_p(port)
+#define fd_outb(value,port) outb_p(value,port)
+
+#define fd_request_dma() (0)
+#define fd_free_dma() ((void)0)
+#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
+#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue() (virtual_dma_count + virtual_dma_residue)
+#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io)
+/*
+ * Do not use vmalloc/vfree: floppy_release_irq_and_dma() gets called from
+ * softirq context via motor_off_callback. A generic bug we happen to trigger.
+ */
+#define fd_dma_mem_alloc(size) __get_free_pages(GFP_KERNEL, get_order(size))
+#define fd_dma_mem_free(addr, size) free_pages(addr, get_order(size))
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_pdma;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
+{
+ register unsigned char st;
+ register int lcount;
+ register char *lptr;
+
+ if (!doing_pdma)
+ return floppy_interrupt(irq, dev_id, regs);
+
+ st = 1;
+ for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+ st=inb(virtual_dma_port+4) & 0xa0 ;
+ if(st != 0xa0)
+ break;
+ if(virtual_dma_mode)
+ outb_p(*lptr, virtual_dma_port+5);
+ else
+ *lptr = inb_p(virtual_dma_port+5);
+ }
+ virtual_dma_count = lcount;
+ virtual_dma_addr = lptr;
+ st = inb(virtual_dma_port+4);
+
+ if(st == 0x20)
+ return IRQ_HANDLED;
+ if(!(st & 0x20)) {
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+ doing_pdma = 0;
+ floppy_interrupt(irq, dev_id, regs);
+ return IRQ_HANDLED;
+ }
+ return IRQ_HANDLED;
+}
+
+static void fd_disable_dma(void)
+{
+ doing_pdma = 0;
+ virtual_dma_residue += virtual_dma_count;
+ virtual_dma_count=0;
+}
+
+static int fd_request_irq(void)
+{
+ return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
+ "floppy", NULL);
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+ doing_pdma = 1;
+ virtual_dma_port = io;
+ virtual_dma_mode = (mode == DMA_MODE_WRITE);
+ virtual_dma_addr = addr;
+ virtual_dma_count = size;
+ virtual_dma_residue = 0;
+ return 0;
+}
+
+/* XEN: This trick to force 'virtual DMA' is from include/asm-m68k/floppy.h. */
+#define FDC1 xen_floppy_init()
+static int FDC2 = -1;
+
+static int xen_floppy_init(void)
+{
+ use_virtual_dma = 1;
+ can_use_virtual_dma = 1;
+ return 0x3f0;
+}
+
+/*
+ * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
+ * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
+ * coincides with another rtc CMOS user. Paul G.
+ */
+#define FLOPPY0_TYPE ({ \
+ unsigned long flags; \
+ unsigned char val; \
+ spin_lock_irqsave(&rtc_lock, flags); \
+ val = (CMOS_READ(0x10) >> 4) & 15; \
+ spin_unlock_irqrestore(&rtc_lock, flags); \
+ val; \
+})
+
+#define FLOPPY1_TYPE ({ \
+ unsigned long flags; \
+ unsigned char val; \
+ spin_lock_irqsave(&rtc_lock, flags); \
+ val = CMOS_READ(0x10) & 15; \
+ spin_unlock_irqrestore(&rtc_lock, flags); \
+ val; \
+})
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_MACH_FLOPPY_H */
--
_______________________________________________
Xen-merge mailing list
Xen-merge@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-merge
|
Home