Hi, Kayvan
I suspect Linux CD-ROM driver cannot use DVD.iso image.
So you should not specify it as cdrom.
Best Regards,
Akio Takebe
>Yes, I run HVM SMP guests all the time too.
>
>Removing the "quiet" option and setting vcpu=4, I see this:
>
>Initial ramdisk at: 0xe00000007dc19000 (4523092 bytes)
>SAL 3.0: Xen/ia64 Tianocore SAL Xen/ia64 SAL version 2.0
>No logical to physical processor mapping available
>iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
>ACPI: Local APIC address c0000000fee00000
>register_intr: changing vector 47 from IO-SAPIC-edge to IO-SAPIC-level
>register_intr: changing vector 43 from IO-SAPIC-edge to IO-SAPIC-level
>register_intr: changing vector 42 from IO-SAPIC-edge to IO-SAPIC-level
>register_intr: changing vector 38 from IO-SAPIC-edge to IO-SAPIC-level
>register_intr: changing vector 37 from IO-SAPIC-edge to IO-SAPIC-level
>4 CPUs available, 4 CPUs total
>MCA related initialization done
>Zone PFN ranges:
> DMA 1024 -> 262144
> Normal 262144 -> 262144
>Movable zone start PFN for each node
>early_node_map[10] active PFN ranges
> 0: 1024 -> 129050
> 0: 129076 -> 129159
> 0: 129160 -> 130426
> 0: 130459 -> 130462
> 0: 130464 -> 130491
> 0: 130492 -> 130544
> 0: 130545 -> 130582
> 0: 130583 -> 131025
> 0: 131026 -> 131027
> 0: 131029 -> 131072
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>Built 1 zonelists in Node order. Total pages: 129536
>Policy zone: DMA
>Kernel command line: BOOT_IMAGE=atapi0:EFI\redhat\vmlinuz-2.6.23.1-42.fc8
>console=ttyS0 rhgb root=LABEL=/ ro
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Placing software IO TLB between 0xd02c000 - 0x1102c000
>Memory: 1854224k/2058928k available (6393k code, 225456k reserved, 5112k
>data, 480k init)
>McKinley Errata 9 workaround not needed; disabling it
>SLUB: Genslabs=26, HWalign=128, Order=0-2, MinObjects=8, CPUs=4, Nodes=1024
>Security Framework v1.0.0 initialized
>SELinux: Initializing.
>selinux_register_security: Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
>Mount-cache hash table entries: 1024
>ACPI: Core revision 20070126
>Boot processor id 0x0/0x0
>Fixed BSP b0 value from CPU 1
>CPU 1: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 320 cycles)
>CPU 2: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 320 cycles)
>CPU 3: synchronized ITC with CPU 0 (last diff 3 cycles, maxerr 320 cycles)
>Brought up 4 CPUs
>Total of 4 processors activated (12550.14 BogoMIPS).
>DMI 2.4 present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOSAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1f40-1f7f claimed by PIIX4 ACPI
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>NetLabel: Initializing
>NetLabel: domain hash size = 128
>NetLabel: protocols = UNLABELED CIPSOv4
>NetLabel: unlabeled traffic allowed by default
>Time: itc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9ffff has been reserved
>NET: Registered protocol family 2
>IP route cache hash table entries: 16384 (order: 3, 131072 bytes)
>TCP established hash table entries: 65536 (order: 6, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4400kB freed
>perfmon: version 2.0 IRQ 238
>perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
>PAL Information Facility v0.5
>perfmon: added sampling format default_format
>perfmon_default_smpl: default_format v2.0 registered
>audit: initializing netlink socket (disabled)
>audit(1201644821.864:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 17B0446D71E5B7D2
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
>Activating ISA DMA hang workarounds.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not
>present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not
>present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not
>present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not
>present [20070126]
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2M.
>_STA] (Node e00000007ff40b80), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2K.
>_STA] (Node e00000007ff40c20), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.FDC0.
>_STA] (Node e00000007ff40ca0), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.UAR1.
>_STA] (Node e00000007ff40d40), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.LTP1.
>_STA] (Node e00000007ff40de0), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2M.
>_STA] (Node e00000007ff40b80), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2K.
>_STA] (Node e00000007ff40c20), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.FDC0.
>_STA] (Node e00000007ff40ca0), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.UAR1.
>_STA] (Node e00000007ff40d40), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.LTP1.
>_STA] (Node e00000007ff40de0), AE_NOT_EXIST
>mspec 4.0 initialized devices: Cached, Uncached
>EFI Time Services Driver v0.4
>Linux agpgart interface v0.102
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2M.
>_STA] (Node e00000007ff40b80), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2K.
>_STA] (Node e00000007ff40c20), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.FDC0.
>_STA] (Node e00000007ff40ca0), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.UAR1.
>_STA] (Node e00000007ff40d40), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.LTP1.
>_STA] (Node e00000007ff40de0), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2M.
>_STA] (Node e00000007ff40b80), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.PS2K.
>_STA] (Node e00000007ff40c20), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.FDC0.
>_STA] (Node e00000007ff40ca0), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.UAR1.
>_STA] (Node e00000007ff40d40), AE_NOT_EXIST
>ACPI Error (uteval-0244): No object was returned from [\_SB_.PCI0.ISA_.LTP1.
>_STA] (Node e00000007ff40de0), AE_NOT_EXIST
>Serial: 8250/16550 driver $Revision: 1.90 $ 16 ports, IRQ sharing enabled
>00:0a: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
>console [ttyS0] enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 32,36
>serio: i8042 KBD port at 0x60,0x64 irq 32
>serio: i8042 AUX port at 0x60,0x64 irq 36
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 480kB freed
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
>Red Hat nash version 6.0.19 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading ehci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>Loading ohci-hcd.ko module
>Loading uhci-hcd.ko module
>Loading mbcache.ko module
>SCSI subsystem initialized
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>Loading sd_mod.ko module
>Loading libata.ko module
>scsi0 : ata_piix
>Loading ata_piix.ko module
>scsi1 : ata_piix
>ata1: PATA max MWDMA2 cmd 0x00000001000001f0 ctl 0x00000001000003f6 bmdma
>0x000000010000c000 irq 34
>ata2: PATA max MWDMA2 cmd 0x0000000100000170 ctl 0x0000000100000376 bmdma
>0x000000010000c008 irq 33
>ata1.00: ATA-7: QEMU HARDDISK, 0.9.0, max UDMA/100
>ata1.00: 20971520 sectors, multi 16: LBA48
>ata1.00: configured for MWDMA2
>ata2.00: ATAPI: QEMU CD-ROM, 0.9.0, max UDMA/100
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.9. PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 20971520 512-byte hardware sectors (10737 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
>sd 0:0:0:0: [sda] 20971520 512-byte hardware sectors (10737 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.9. PQ: 0 ANSI: 5
>Kernel panic - not syncing: Attempted to kill init!
>Waiting for driv
>
>-----Original Message-----
>From: Alex Williamson [mailto:alex.williamson@xxxxxx]
>Sent: Tuesday, January 29, 2008 2:11 PM
>To: Kayvan Sylvan
>Cc: xen-ia64-devel
>Subject: Re: [Xen-ia64-devel] RE: Has anyone seen this before? vcpus > 1
>panics DomU kernel
>
>
> Very odd, I run 4-way HVM guests all the time. The domain boots if
>vcpus=1 is set in the config file? You might try removing the quiet
>option from the guest elilo to see if you get any informative boot
>messages.
>
> Alex
>
>On Tue, 2008-01-29 at 13:51 -0800, Kayvan Sylvan wrote:
>> I am running xen-3.3-unstable and the latest guest firmware binary.
>> Dom0 is running CentOS-4.6
>
>_______________________________________________
>Xen-ia64-devel mailing list
>Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>http://lists.xensource.com/xen-ia64-devel
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home