Using Cset 10269, I was also able to boot dom0 with 2 vcpus. But the
/proc/cpuinfo only have one cpu while "xm vcpu-lis" has two. Here is the serial
console info (Cset 10269):
Xen version 3.0-unstable (build@) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)
) Sat Jun 10 01:02:38 CST 2006
Latest ChangeSet: Fri Jun 9 10:40:31 2006 -0600 10269:aa2298739112
============================================================================
(XEN) xen image pstart: 0x4000000, xenheap pend: 0x8000000
(XEN) efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
(XEN) efi.trim_top: ignoring 24KB of memory at 0x1000 due to granule hole at 0x0
(XEN) efi.trim_top: ignoring 8KB of memory at 0x7000 due to granule hole at 0x0
(XEN) efi.trim_top: ignoring 484KB of memory at 0x9000 due to granule hole at 0x
0
(XEN) efi.trim_top: ignoring 4KB of memory at 0x84000 due to granule hole at 0x0
(XEN) efi.trim_top: ignoring 108KB of memory at 0x85000 due to granule hole at 0
x0
(XEN) efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to granule hol
e at 0x0
(XEN) ready to move Dom0 to 0x8000000 with len e78a90...ready to move initrd to
0x8e7c000 with len 13e84d...Done
(XEN) find_memory: efi_memmap_walk returns max_page=bffed
(XEN) Before heap_start: f00000000411a7f0
(XEN) After heap_start: f000000004138000
(XEN) Init boot pages: 0x1000000 -> 0x4000000.
(XEN) Init boot pages: 0x8e78a90 -> 0x8e7c000.
(XEN) Init boot pages: 0x8fba84d -> 0x7f708000.
(XEN) Init boot pages: 0x7fe58000 -> 0x7ff30000.
(XEN) Init boot pages: 0x100000000 -> 0x1ffffc000.
(XEN) Init boot pages: 0x280000000 -> 0x2fee04010.
(XEN) Init boot pages: 0x2fee04070 -> 0x2fee07f66.
(XEN) Init boot pages: 0x2fee07fd1 -> 0x2fef4e010.
(XEN) Init boot pages: 0x2fef4ea00 -> 0x2ffe14000.
(XEN) Init boot pages: 0x2ffe80000 -> 0x2fffb4000.
(XEN) System RAM: 8167MB (8363152kB)
(XEN) size of virtual frame_table: 20480kB
(XEN) virtual machine to physical table: f3ffffffffa00098 size: 4144kB
(XEN) max_page: 0xbffed
(XEN) Xen heap: 62MB (64288kB)
(XEN) About to call scheduler_init()
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) ACPI: RSDP (v002 INTEL ) @ 0x000000007ff83
000
(XEN) ACPI: XSDT (v001 INTEL SR870BN4 0x01072002 MSFT 0x00010013) @ 0x000000007
ff83090
(XEN) ACPI: FADT (v003 INTEL SR870BN4 0x01072002 MSFT 0x00010013) @ 0x000000007
ff83138
(XEN) ACPI: MADT (v001 INTEL SR870BN4 0x01072002 MSFT 0x00010013) @ 0x000000007
ff83230
(XEN) ACPI: DSDT (v001 Intel SR870BN4 0x00000000 INTL 0x20030918) @ 0x000000000
0000000
(XEN) SAL 3.20: Intel Corp SR870BN4
version 3.0
(XEN) SAL Platform features: BusLock
(XEN) SAL: AP wakeup using external interrupt vector 0xf0
(XEN) cpu package is Multi-Core capable: number of cores=2
(XEN) cpu package is Multi-Threading capable: number of siblings=2
(XEN) avail:0x3170074000000000, status:0x74000000000,control:0x3170000000000000,
vm?0x10000000000
(XEN) WARNING: no opcode provided from hardware(0)!!!
(XEN) vm buffer size: 1048576, order: 6
(XEN) cpu_init: current=f0000000040cc000
(XEN) vm_buffer: 0xf000000007e00000
(XEN) vhpt_init: vhpt paddr=0x1fffe0000, end=0x1fffeffff
(XEN) iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
(XEN) ACPI: Local APIC address e8000000fee00000
(XEN) ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0xc0] lsapic_eid[0x18] enabled)
(XEN) CPU 0 (0xc018) enabled (BSP)
(XEN) ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0xc2] lsapic_eid[0x18] disabled)
(XEN) CPU 1 (0xc218) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x02] lsapic_id[0xc4] lsapic_eid[0x18] disabled)
(XEN) CPU 2 (0xc418) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x03] lsapic_id[0xc6] lsapic_eid[0x18] disabled)
(XEN) CPU 3 (0xc618) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x04] lsapic_id[0xc1] lsapic_eid[0x18] enabled)
(XEN) CPU 4 (0xc118) enabled
(XEN) ACPI: LSAPIC (acpi_id[0x05] lsapic_id[0xc3] lsapic_eid[0x18] disabled)
(XEN) CPU 5 (0xc318) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x06] lsapic_id[0xc5] lsapic_eid[0x18] disabled)
(XEN) CPU 6 (0xc518) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x07] lsapic_id[0xc7] lsapic_eid[0x18] disabled)
(XEN) CPU 7 (0xc718) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x08] lsapic_id[0xc0] lsapic_eid[0x98] disabled)
(XEN) CPU 8 (0xc098) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x09] lsapic_id[0xc2] lsapic_eid[0x98] disabled)
(XEN) CPU 9 (0xc298) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x0a] lsapic_id[0xc4] lsapic_eid[0x98] disabled)
(XEN) CPU 10 (0xc498) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x0b] lsapic_id[0xc6] lsapic_eid[0x98] disabled)
(XEN) CPU 11 (0xc698) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x0c] lsapic_id[0xc1] lsapic_eid[0x98] disabled)
(XEN) CPU 12 (0xc198) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x0d] lsapic_id[0xc3] lsapic_eid[0x98] disabled)
(XEN) CPU 13 (0xc398) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x0e] lsapic_id[0xc5] lsapic_eid[0x98] disabled)
(XEN) CPU 14 (0xc598) disabled
(XEN) ACPI: LSAPIC (acpi_id[0x0f] lsapic_id[0xc7] lsapic_eid[0x98] disabled)
(XEN) CPU 15 (0xc798) disabled
(XEN) ACPI: IOSAPIC (id[0x0] address[00000000fec00000] gsi_base[0])
(XEN) ACPI: IOSAPIC (id[0x1] address[00000000fec10000] gsi_base[24])
(XEN) ACPI: IOSAPIC (id[0x2] address[00000000fec20000] gsi_base[48])
(XEN) ACPI: IOSAPIC (id[0x3] address[00000000fec30000] gsi_base[72])
(XEN) ACPI: IOSAPIC (id[0x4] address[00000000fec40000] gsi_base[96])
(XEN) ACPI: IOSAPIC (id[0x5] address[00000000fec50000] gsi_base[120])
(XEN) ACPI: IOSAPIC (id[0x6] address[00000000fec60000] gsi_base[144])
(XEN) ACPI: PLAT_INT_SRC (low level type[0x3] id[0x00c0] eid[0x18] iosapic_vecto
r[0x1e] global_irq[0x16]
(XEN) PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
(XEN) 2 CPUs available, 16 CPUs total
(XEN) ia64_mca_init() skipped (Machine check abort handling)
(XEN) About to call init_xen_time()
(XEN) CPU 0: base freq=199.458MHz, ITC ratio=6/4, ITC freq=299.187MHz
(XEN) Time init:
(XEN) .... System Time: 3119096ns
(XEN) .... scale: 357A6F358
(XEN) About to call timer_init()
(XEN) Boot processor id 0x0/0xc018
(XEN) num_online_cpus=1, max_cpus=64
(XEN) cpu_init: current=f000000007ff0000
(XEN) vhpt_init: vhpt paddr=0x2fee10000, end=0x2fee1ffff
(XEN) CPU 1: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 127 cycles
)
(XEN) CPU 1: base freq=199.458MHz, ITC ratio=6/4, ITC freq=299.187MHz
(XEN) Brought up 2 CPUs
(XEN) Total of 2 processors activated (0.52 BogoMIPS).
(XEN) About to call sort_main_extable()
(XEN) Maximum number of domains: 63; 18 RID bits per domain
(XEN) About to call domain_create()
(XEN) ### domain f000000007ffaa30: rid=40000-80000 mp_rid=1000
(XEN) arch_domain_create: domain=f000000007ffaa30
(XEN) About to call construct_dom0()
(XEN) *** LOADING DOMAIN 0 ***
(XEN) METAPHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 4000000->4fe3dc8
(XEN) Entry address: 400ff20
(XEN) Init. ramdisk: 3fac0000 len 13e84d
(XEN) Start info.: 4fe4000->4fe8000
(XEN) Dom0 max_vcpus=2
(XEN) Dom0: 0xf000000007ffaa30, domain: 0xf000000007ffaa30
(XEN) Domain0 EFI passthrough: MPS=0x7ff82000enable lsapic entry: 0xf00000007ff8
325c
(XEN) enable lsapic entry: 0xf00000007ff8328c
(XEN) __assign_domain_page: mpaddr 7ff80000 already mapped!
(XEN) __assign_domain_page: mpaddr 7ff84000 already mapped!
(XEN) ACPI 2.0=0x7ff83000__assign_domain_page: mpaddr 7ff84000 already mapped!
(XEN) ACPI=0x7ff84000 SMBIOS=0xf0000
(XEN) domain mem: type=13, attr=0x8000000000000008, range=[0x0000000000100000-0x
0000000000200000) (1MB)
(XEN) domain mem: type= 5, attr=0x8000000000000009, range=[0x0000000000100000-0x
0000000000100000) (0MB)
(XEN) domain mem: type= 5, attr=0x8000000000000009, range=[0x000000007f70a000-0x
000000007fb00000) (3MB)
(XEN) domain mem: type= 5, attr=0x8000000000000009, range=[0x000000007fe00000-0x
000000007fe58000) (0MB)
(XEN) domain mem: type= 5, attr=0x8000000000000009, range=[0x00000002ffe14000-0x
00000002ffe80000) (0MB)
(XEN) domain mem: type= 6, attr=0x8000000000000009, range=[0x0000000000082000-0x
0000000000082000) (0MB)
(XEN) __assign_domain_page: mpaddr 7ff80000 already mapped!
(XEN) __assign_domain_page: mpaddr 7ff84000 already mapped!
(XEN) domain mem: type= 6, attr=0x8000000000000009, range=[0x000000007ff30000-0x
0000000080000000) (0MB)
(XEN) domain mem: type= 6, attr=0x8000000000000001, range=[0x00000000ff000000-0x
0000000100000000) (16MB)
(XEN) domain mem: type= 6, attr=0x8000000000000009, range=[0x00000001ffffe000-0x
0000000200000000) (0MB)
(XEN) domain mem: type= 6, attr=0x8000000000000009, range=[0x00000002fffb6000-0x
0000000300000000) (0MB)
(XEN) domain mem: type=11, attr=0x0000000000000001, range=[0x00000000fe000000-0x
00000000ff000000) (16MB)
(XEN) domain mem: type=11, attr=0x8000000000000001, range=[0x00000ffff8000000-0x
00000ffffc000000) (64MB)
(XEN) domain mem: type=12, attr=0x8000000000000001, range=[0x00000ffffc000000-0x
0000100000000000) (64MB)
(XEN) domain mem: type= 7, attr=0x0000000000000009, range=[0x0000000000001000-0x
0000000000001000) (0MB)
(XEN) domain mem: type= 7, attr=0x0000000000000009, range=[0x0000000000009000-0x
0000000000009000) (0MB)
(XEN) domain mem: type= 7, attr=0x0000000000000009, range=[0x0000000000084000-0x
0000000000084000) (0MB)
(XEN) domain mem: type= 7, attr=0x0000000000000008, range=[0x0000000000200000-0x
0000000040000000) (1022MB)
(XEN) initrd start 0x3fac0000 initrd size 0x13e84d
(XEN) Scrubbing Free RAM: ......................................................
.....................................................................done.
(XEN) About to call init_trace_bufs()
(XEN) Xen trace buffers: disabled
(XEN) About to call schedulers_start dom0=f000000007ffaa30, idle_dom=f0000000040
d3e08
(XEN) About to call startup_cpu_idle_loop()
(XEN) vcpu_get_lrr0: Unmasked interrupts unsupported
(XEN) vcpu_get_lrr1: Unmasked interrupts unsupported
(XEN) Linux version 2.6.16.13-xen (build@hp-build) (gcc version 3.4.5 20051201 (
Red Hat 3.4.5-2)) #1 SMP Sat Jun 10 01:14:12 CST 2006
(XEN) EFI v1.00 by Xen/ia64: SALsystab=0x178 MPS=0x7ff82000 ACPI 2.0=0x7ff83000
ACPI=0
x7ff84000 SMBIOS=0xf0000
(XEN) Initial ramdisk at: 0xe00000003fac0000 (1304653 bytes)
(XEN) SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
(XEN) SAL: AP wakeup using external interrupt vector 0xf3
(XEN) xen_pal_emulator: UNIMPLEMENTED PAL CALL 42!!!!
(XEN) No logical to physical processor mapping available
(XEN) vcpu_set_itc: Setting ar.itc is currently disabled
(XEN) (this message is only displayed one)
(XEN) ACPI: Local APIC address c0000000fee00000
(XEN) ACPI: [APIC:0x07] ignored 12 entries of 16 found
(XEN) PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30
(XEN) 1 CPUs available, 4 CPUs total
(XEN) Running on Xen! start_info_pfn=0x13f9 nr_pages=65536 flags=0x3
(XEN) SMP: Allowing 4 CPUs, 3 hotplug CPUs
(XEN) Built 1 zonelists
(XEN) Kernel command line: nomca console=tty0 console=ttyS1,57600,8n1
root=/dev/sda2 r
o
(XEN) PID hash table entries: 4096 (order: 12, 131072 bytes)
(XEN) Console: colour VGA+ 80x25
(XEN) Linux version 2.6.16.13-xen (build@hp-build) (gcc version 3.4.5 20051201
(Red Ha
t 3.4.5-2)) #1 SMP Sat Jun 10 01:14:12 CST 2006
EFI v1.00 by Xen/ia64: SALsystab=0x178 MPS=0x7ff82000 ACPI 2.0=0x7ff83000 ACPI=0
x7ff84000 SMBIOS=0xf0000
Initial ramdisk at: 0xe00000003fac0000 (1304653 bytes)
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
SAL: AP wakeup using external interrupt vector 0xf3
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
ACPI: [APIC:0x07] ignored 12 entries of 16 found
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30
1 CPUs available, 4 CPUs total
Running on Xen! start_info_pfn=0x13f9 nr_pages=65536 flags=0x3
SMP: Allowing 4 CPUs, 3 hotplug CPUs
Built 1 zonelists
Kernel command line: nomca console=tty0 console=ttyS1,57600,8n1 root=/dev/sda2 r
o
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Bus range: 0x000000000c000000 - 0x0000000010000000
Kernel range: 0xe000000004fe8000 - 0xe000000008fe8000
Memory: 940368k/1032192k available (10402k code, 91200k reserved, 4349k data, 30
4k init)
McKinley Errata 9 workaround not needed; disabling it
register RESCHEDULE_VECTOR (€) to xen irq (256)
Percpu irq 15 is unsupported by xen!
register IPI_VECTOR (€) to xen irq (257)
Percpu irq 238 is unsupported by xen!
register VIRQ_ITC (€) to xen irq (258)
Mount-cache hash table entries: 1024
Boot processor id 0x0/0xc018
Brought up 1 CPUs
Total of 1 processors activated (2785.28 BogoMIPS).
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 1264kB freed
grant table at e000010000000000
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0c00-0c7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
ACPI: PCI Root Bridge [PCI1] (0000:02)
ACPI: PCI Root Bridge [PCI3] (0000:08)
ACPI: PCI Root Bridge [PCI4] (0000:0e)
ACPI: Device [CSFF] status [00000008]: functional but not present; setting prese
nt
ACPI: PCI Root Bridge [CSFF] (0000:ff)
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
ACPI: Power Button (FF) [PWRF]
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.1 20051102
serio: i8042 AUX port at 0x60,0x64 irq 36
serio: i8042 KBD port at 0x60,0x64 irq 32
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
acpi_serial_port: zero-length IO port range?
serial8250: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
acpi_serial_port: zero-length IO port range?
serial8250: ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
Linux version 2.6.16.13-xen (build@hp-build) (gcc version 3.4.5 20051201 (Red Ha
t 3.4.5-2)) #1 SMP Sat Jun 10 01:14:12 CST 2006
Linux version 2.6.16.13-xen (build@hp-build) (gcc version 3.4.5 20051201 (Red Ha
t 3.4.5-2)) #1 SMP Sat Jun 10 01:14:12 CST 2006
EFI v1.00 by Xen/ia64: SALsystab=0x178 MPS=0x7ff82000 ACPI 2.0=0x7ff83000 ACPI=0
x7ff84000 SMBIOS=0xf0000
EFI v1.00 by Xen/ia64: SALsystab=0x178 MPS=0x7ff82000 ACPI 2.0=0x7ff83000 ACPI=0
x7ff84000 SMBIOS=0xf0000
Initial ramdisk at: 0xe00000003fac0000 (1304653 bytes)
Initial ramdisk at: 0xe00000003fac0000 (1304653 bytes)
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
SAL: AP wakeup using external interrupt vector 0xf3
SAL: AP wakeup using external interrupt vector 0xf3
No logical to physical processor mapping available
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
ACPI: Local APIC address c0000000fee00000
ACPI: [APIC:0x07] ignored 12 entries of 16 found
ACPI: [APIC:0x07] ignored 12 entries of 16 found
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector 30
1 CPUs available, 4 CPUs total
1 CPUs available, 4 CPUs total
Running on Xen! start_info_pfn=0x13f9 nr_pages=65536 flags=0x3
Running on Xen! start_info_pfn=0x13f9 nr_pages=65536 flags=0x3
SMP: Allowing 4 CPUs, 3 hotplug CPUs
SMP: Allowing 4 CPUs, 3 hotplug CPUs
Built 1 zonelists
Built 1 zonelists
Kernel command line: nomca console=tty0 console=ttyS1,57600,8n1 root=/dev/sda2 r
o
Kernel command line: nomca console=tty0 console=ttyS1,57600,8n1 root=/dev/sda2 r
o
PID hash table entries: 4096 (order: 12, 131072 bytes)
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
Software IO TLB enabled:
Software IO TLB enabled:
Aperture: 64 megabytes
Aperture: 64 megabytes
Bus range: 0x000000000c000000 - 0x0000000010000000
Bus range: 0x000000000c000000 - 0x0000000010000000
Kernel range: 0xe000000004fe8000 - 0xe000000008fe8000
Kernel range: 0xe000000004fe8000 - 0xe000000008fe8000
Memory: 940368k/1032192k available (10402k code, 91200k reserved, 4349k data, 30
4k init)
Memory: 940368k/1032192k available (10402k code, 91200k reserved, 4349k data, 30
4k init)
McKinley Errata 9 workaround not needed; disabling it
McKinley Errata 9 workaround not needed; disabling it
register RESCHEDULE_VECTOR (€) to xen irq (256)
register RESCHEDULE_VECTOR (€) to xen irq (256)
Percpu irq 15 is unsupported by xen!
Percpu irq 15 is unsupported by xen!
register IPI_VECTOR (€) to xen irq (257)
register IPI_VECTOR (€) to xen irq (257)
Percpu irq 238 is unsupported by xen!
Percpu irq 238 is unsupported by xen!
register VIRQ_ITC (€) to xen irq (258)
register VIRQ_ITC (€) to xen irq (258)
Mount-cache hash table entries: 1024
Mount-cache hash table entries: 1024
Boot processor id 0x0/0xc018
Boot processor id 0x0/0xc018
Brought up 1 CPUs
Brought up 1 CPUs
Total of 1 processors activated (2785.28 BogoMIPS).
Total of 1 processors activated (2785.28 BogoMIPS).
migration_cost=0
migration_cost=0
checking if image is initramfs... it is
checking if image is initramfs... it is
Freeing initrd memory: 1264kB freed
Freeing initrd memory: 1264kB freed
grant table at e000010000000000
grant table at e000010000000000
Grant table initialized
Grant table initialized
NET: Registered protocol family 16
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: bus type pci registered
ACPI: Subsystem revision 20060127
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0c00-0c7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0c00-0c7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
ACPI: PCI Root Bridge [PCI1] (0000:02)
ACPI: PCI Root Bridge [PCI1] (0000:02)
ACPI: PCI Root Bridge [PCI3] (0000:08)
ACPI: PCI Root Bridge [PCI3] (0000:08)
ACPI: PCI Root Bridge [PCI4] (0000:0e)
ACPI: PCI Root Bridge [PCI4] (0000:0e)
ACPI: Device [CSFF] status [00000008]: functional but not present; setting prese
nt
ACPI: Device [CSFF] status [00000008]: functional but not present; setting prese
nt
ACPI: PCI Root Bridge [CSFF] (0000:ff)
ACPI: PCI Root Bridge [CSFF] (0000:ff)
xen_mem: Initialising balloon driver.
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hub
perfmon: version 2.0 IRQ 238
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
perfmon_default_smpl: default_format v2.0 registered
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
SGI XFS with large block/inode numbers, no debug enabled
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
Initializing Cryptographic API
io scheduler noop registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [8] registered
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (FF) [PWRF]
EFI Time Services Driver v0.4
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized drm 1.0.1 20051102
serio: i8042 AUX port at 0x60,0x64 irq 36
serio: i8042 AUX port at 0x60,0x64 irq 36
serio: i8042 KBD port at 0x60,0x64 irq 32
serio: i8042 KBD port at 0x60,0x64 irq 32
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
acpi_serial_port: zero-length IO port range?
acpi_serial_port: zero-length IO port range?
serial8250: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
acpi_serial_port: zero-length IO port range?
acpi_serial_port: zero-length IO port range?
serial8250: ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
isa bounce pool size: 16 pages
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
loop: loaded (max 8 devices)
nbd: registered device at major 43
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
Copyright (c) 1999-2005 Intel Corporation.
Copyright (c) 1999-2005 Intel Corporation.
GSI 18 (level, low) -> CPU 0 (0xc018) vector 48
GSI 18 (level, low) -> CPU 0 (0xc018) vector 48
ACPI: PCI Interrupt 0000:01:00.0[A] -> ACPI: PCI Interrupt 0000:01:00.0[A] -> GS
I 18 (level, low) -> IRQ 48
GSI 18 (level, low) -> IRQ 48
e1000: 0000:01:00.0: e1000_probe: (PCI:33MHz:32-bit) e1000: 0000:01:00.0: e1000_
probe: (PCI:33MHz:32-bit) 00:00:07:07:e9:e9:d8:d8:16:16:95
95
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 24 (level, low) -> CPU 0 (0xc018) vector 49
GSI 24 (level, low) -> CPU 0 (0xc018) vector 49
ACPI: PCI Interrupt 0000:06:01.0[A] -> ACPI: PCI Interrupt 0000:06:01.0[A] -> GS
I 24 (level, low) -> IRQ 49
GSI 24 (level, low) -> IRQ 49
e1000: 0000:06:01.0: e1000_probe: (PCI:66MHz:64-bit) e1000: 0000:06:01.0: e1000_
probe: (PCI:66MHz:64-bit) 00:00:03:03:47:47:72:72:3b:3b:43
43
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
e100: Copyright(c) 1999-2005 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al.
arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al.
netconsole: not configured, aborting
netconsole: not configured, aborting
Linux video capture interface: v1.00
Linux video capture interface: v1.00
WARNING: Failed to register Xen virtual console driver as 'ttyS0'
WARNING: Failed to register Xen virtual console driver as 'ttyS0'
Event-channel device installed.
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xe00000003d000000
blkif_init: reqs=64, pages=704, mmap_vstart=0xe00000003d000000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Device 0000:00:1f.1 not available because of resource collisions
PCI: Device 0000:00:1f.1 not available because of resource collisions
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSIACPI: PCI Interrupt 0000:00:1f.1[A]:
no GSI
ICH4: BIOS configuration fixed.
ICH4: BIOS configuration fixed.
ICH4: chipset revision 2
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007 ide0: BM-DMA at 0x1000-0x1007, BIOS setting
s: hda:DMA, hdb:pio, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f ide1: BM-DMA at 0x1008-0x100f, BIOS setting
s: hdc:pio, hdd:pio, BIOS settings: hdc:pio, hdd:pio
hda: MATSHITADVD-ROM SR-8177, hda: MATSHITADVD-ROM SR-8177, ATAPI ATAPI CD/DVD-R
OMCD/DVD-ROM drive
drive
hdb: LS-120/240 00 UHD Floppy, hdb: LS-120/240 00 UHD Floppy, ATAPI ATAPI FLOPPY
FLOPPY drive
drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 34ide0 at 0x1f0-0x1f7,0x3f6 on irq 34
hda: ATAPIhda: ATAPI 24X 24X DVD-ROM DVD-ROM drive drive, 256kB Cache, 256kB Cac
he, UDMA(33), UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
hdb: No disk in drive
hdb: No disk in drive
hdb: 234752kB, 262/32/56 CHS, 2995 kBps, 512 sector size, 1500 rpm
hdb: 234752kB, 262/32/56 CHS, 2995 kBps, 512 sector size, 1500 rpm
st: Version 20050830, fixed bufsize 32768, s/g segs 256
st: Version 20050830, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.3
osst :I: Tape driver with OnStream support version 0.99.3
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Fusion MPT base driver 3.03.07
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
Fusion MPT SPI Host driver 3.03.07
GSI 28 (level, low) -> CPU 0 (0xc018) vector 50
GSI 28 (level, low) -> CPU 0 (0xc018) vector 50
ACPI: PCI Interrupt 0000:06:02.0[A] -> ACPI: PCI Interrupt 0000:06:02.0[A] -> GS
I 28 (level, low) -> IRQ 50
GSI 28 (level, low) -> IRQ 50
mptbase: Initiating ioc0 bringup
mptbase: Initiating ioc0 bringup
ioc0: ioc0: 53C1030: 53C1030: Capabilities={Capabilities={InitiatorInitiator}
}
scsi0 : ioc0: LSI53C1030, FwRev=01030a00h, Ports=1, MaxQ=255, IRQ=50
scsi0 : ioc0: LSI53C1030, FwRev=01030a00h, Ports=1, MaxQ=255, IRQ=50
Vendor: Vendor: MMAAXXTTOORR Model: Model: AATTLLAASSUU332200__1188__
SSCCAA Rev: Rev: BB112200
Type: Direct-Access Type: Direct-Access ANSI SC
SI revision: 03 ANSI SCSI revision: 03
SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
sda: Write Protect is off
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
sda: Write Protect is off
sda: Write Protect is off
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: drive cache: write back w/ FUA
sda: sda: sda1 sda1 sda2 sda2 sda3 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: Vendor: MMAAXXTTOORR Model: Model: AATTLLAASS1100KK44__7733SS
CCAA Rev: Rev: DDFFVV00
Type: Direct-Access Type: Direct-Access ANSI SC
SI revision: 03 ANSI SCSI revision: 03
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb: sdb1 sdb1 sdb2 sdb2
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
Vendor: Vendor: EESSGG--SSHHVV Model: Model: SSCCAA HHSSBBPP MM1177
Rev: Rev: 00110011
Type: Processor Type: Processor ANSI SC
SI revision: 02 ANSI SCSI revision: 02
0:0:6:0: Attached scsi generic sg2 type 3
0:0:6:0: Attached scsi generic sg2 type 3
GSI 29 (level, low) -> CPU 0 (0xc018) vector 51
GSI 29 (level, low) -> CPU 0 (0xc018) vector 51
ACPI: PCI Interrupt 0000:06:02.1[B] -> ACPI: PCI Interrupt 0000:06:02.1[B] -> GS
I 29 (level, low) -> IRQ 51
GSI 29 (level, low) -> IRQ 51
mptbase: Initiating ioc1 bringup
mptbase: Initiating ioc1 bringup
ioc1: ioc1: 53C1030: 53C1030: Capabilities={Capabilities={InitiatorInitiator}
}
scsi1 : ioc1: LSI53C1030, FwRev=01030a00h, Ports=1, MaxQ=255, IRQ=51
scsi1 : ioc1: LSI53C1030, FwRev=01030a00h, Ports=1, MaxQ=255, IRQ=51
Fusion MPT SAS Host driver 3.03.07
Fusion MPT SAS Host driver 3.03.07
usbmon: debugfs is not available
usbmon: debugfs is not available
GSI 23 (level, low) -> CPU 0 (0xc018) vector 52
GSI 23 (level, low) -> CPU 0 (0xc018) vector 52
ACPI: PCI Interrupt 0000:00:1d.7[D] -> ACPI: PCI Interrupt 0000:00:1d.7[D] -> GS
I 23 (level, low) -> IRQ 52
GSI 23 (level, low) -> IRQ 52
__assign_domain_page: mpaddr f9ff0000 already mapped!
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: slot 0000:00:1d.7 has incorrect PCI cache line size of 0 bytes,PCI: slot 00
00:00:1d.7 has incorrect PCI cache line size of 0 bytes, correcting to 128
correcting to 128
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 52, io mem 0xf9ff0000
ehci_hcd 0000:00:1d.7: irq 52, io mem 0xf9ff0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
USB Universal Host Controller Interface driver v2.3
GSI 16 (level, low) -> CPU 0 (0xc018) vector 53
GSI 16 (level, low) -> CPU 0 (0xc018) vector 53
ACPI: PCI Interrupt 0000:00:1d.0[A] -> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GS
I 16 (level, low) -> IRQ 53
GSI 16 (level, low) -> IRQ 53
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 53, io base 0x00005cc0
uhci_hcd 0000:00:1d.0: irq 53, io base 0x00005cc0
usb usb2: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: 2 ports detected
GSI 19 (level, low) -> CPU 0 (0xc018) vector 54
GSI 19 (level, low) -> CPU 0 (0xc018) vector 54
ACPI: PCI Interrupt 0000:00:1d.1[B] -> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GS
I 19 (level, low) -> IRQ 54
GSI 19 (level, low) -> IRQ 54
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 54, io base 0x00005ce0
uhci_hcd 0000:00:1d.1: irq 54, io base 0x00005ce0
usb usb3: configuration #1 chosen from 1 choice
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
Initializing USB Mass Storage driver...
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver hiddev
input: ATEN ATEN CS-1716/08/04 as /class/input/input0
input: ATEN ATEN CS-1716/08/04 as /class/input/input0
inputinput: USB HID v1.10 Keyboard [ATEN ATEN CS-1716/08/04] on usb-0000:00:1d.
0-1
: USB HID v1.10 Keyboard [ATEN ATEN CS-1716/08/04] on usb-0000:00:1d.0-1
input: ATEN ATEN CS-1716/08/04 as /class/input/input1
input: ATEN ATEN CS-1716/08/04 as /class/input/input1
inputinput: USB HID v1.10 Mouse [ATEN ATEN CS-1716/08/04] on usb-0000:00:1d.0-1
: USB HID v1.10 Mouse [ATEN ATEN CS-1716/08/04] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c /dev entries driver
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
EFI Variables Facility v0.08 2004-May-17
EFI Variables Facility v0.08 2004-May-17
efivars: get_next_variable: status=8000000000000003
efivars: get_next_variable: status=8000000000000003
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20
2006 UTC).
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20
2006 UTC).
atkbd.c: keyboard reset failed on isa0060/serio1
atkbd.c: keyboard reset failed on isa0060/serio1
atkbd.c: keyboard reset failed on isa0060/serio0
atkbd.c: keyboard reset failed on isa0060/serio0
no UART detected at 0x1
no UART detected at 0x1
specify port
specify port
snd_mpu401: probe of snd_mpu401.0 failed with error -22
snd_mpu401: probe of snd_mpu401.0 failed with error -22
ALSA device list:
ALSA device list:
#0: Dummy 1
#0: Dummy 1
#1: Virtual MIDI Card 1
#1: Virtual MIDI Card 1
NET: Registered protocol family 2
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 3, 131072 bytes)
IP route cache hash table entries: 16384 (order: 3, 131072 bytes)
TCP established hash table entries: 65536 (order: 6, 1048576 bytes)
TCP established hash table entries: 65536 (order: 6, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
TCP reno registered
TCP bic registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 17
Bridge firewalling registered
Bridge firewalling registered
xen privcmd uses pseudo physical addr range [0x300000000, 0x3ffff000000] (418200
0MB)
xen privcmd uses pseudo physical addr range [0x300000000, 0x3ffff000000] (418200
0MB)
Freeing unused kernel memory: 304kB freed
Freeing unused kernel memory: 304kB freedRed Hat nash version 4.2.1.6 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Creating root device
Mounting root filesystem
kjournald starting. Commit interval 5 seconds
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs: mounted filesystem with ordered data mode.
Switching to new root
modprobe: FATAL: Could not load /lib/modules/2.6.16.13-xen/modules.dep: No such
file or directory
INIT: version 2.85 booting
Welcome to Red Hat Enterprise Linux AS
Press 'I' to enter interactive startup.
Starting udev: [ OK ]
Initializing hardware... storage network audio done[ OK ]
raidautorun: failed to open /dev/md0: 6
Configuring kernel parameters: [ OK ]
Setting clock (localtime): Tue Jun 13 16:31:58 CST 2006 [ OK ]
Setting hostname tiger42: [ OK ]
Checking root filesystem
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda2
/: clean, 313866/1921984 files, 2091010/3840000 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
DM multipath kernel driver not loaded
No devices found
Setting up Logical Volume Management: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /mnt/sdb1] fsck.ext3 -a /dev/sdb1
/dev/sdb1: clean, 68/4889248 files, 8503192/9767512 blocks
[/sbin/fsck.ext3 (1) -- /data] fsck.ext3 -a /dev/sdb2
/dev/sdb2: clean, 22/4096000 files, 1893810/8189132 blocks
[ OK ]
Mounting local filesystems: [ OK ]
Enabling local filesystem quotas: [ OK ]
Enabling swap space: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting sysstat: [ OK ]
========================================================================
-----Original Message-----
From: Tristan Gingold [mailto:Tristan.Gingold@xxxxxxxx]
Sent: Tuesday, June 13, 2006 4:27 PM
To: Zhang, Jingke
Cc: xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-ia64-devel] how to make a "smp xen0 config file", thanks
Le Mardi 13 Juin 2006 10:25, Tristan Gingold a écrit :
> Le Mardi 13 Juin 2006 10:02, Zhang, Jingke a écrit :
> > Hi Tristan,
> > I reboot my machine with your configuration. Cset is 10022, when it
> > booted up I find only one cpu in the /proc/cpuinfo. But "xm vcpu-list"
> > showed me: Name ID VCPU CPU State Time(s) CPU Affinity
> > Domain-0 0 0 0 r-- 317.9 0
> > Domain-0 0 1 - --p 0.0 any cpu
> >
> > Very strange it is! Why they are different?
>
> Linux didn't boot the second cpu. Could you post the linux console
> messages ?
Also note using CS 10269, I was able to boot dom0 with 2 vcpus.
Tristan.
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home