Hi Konrad,
Thanks for your response.
My understanding of this solution is that we are essentially switching off VT-d
and using a software solution instead (bounce buffers?).
Am I correct?.
Ray Kinsella
-----Original Message-----
From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@xxxxxxxxxx]
Sent: Thursday, March 03, 2011 3:03 PM
To: Kinsella, Ray
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] PCI Passthrough and PV-OPS
On Thu, Mar 03, 2011 at 02:25:47PM +0000, Kinsella, Ray wrote:
> Hi all,
>
> I am having a problem with Xen 4.0.1, PCI Passthrough with VT-d and Linux PV
> Guests, and I was wondering if anyone else had seen it.
> In both Dom 0 and Dom U's I am using 64bit PV-OPS 2.6.32.26 Kernels from
> Jeremy Fitzhartridge's Git repo.
Do you have 'iommu=soft' in your guest configuration?
>
> I am using dual port SR-IOV NIC's to test, passing through physical functions
> only.
> Passthrough appears to work, I can passthrough the NIC and it will appear in
> the guest with lspci.
> The guest detects the new device and loads the driver to service the NIC, as
> you would expect.
>
> The guest is complaining about the NIC being hung, the message "Detected Tx
> Unit Hang..." is appearing in the system log on the guest.
> In the Xen log, VT-d is producing errors similar to this one;
>
> (XEN) [VT-D]iommu.c:824: iommu_fault_status: Primary Pending Fault
> (XEN) [VT-D]iommu.c:799: DMAR:[DMA Read] Request device [03:00.0] fault addr
> 7c584000, iommu reg = ffff82c3fff57000
> (XEN) DMAR:[fault reason 06h] PTE Read access is not set
> (XEN) print_vtd_entries: iommu = ffff83016fffa5f0 bdf = 3:0.0 gmfn = 7c584
> (XEN) root_entry = ffff83016ff38000
> (XEN) root_entry[3] = 14d90a001
> (XEN) context = ffff83014d90a000
> (XEN) context[0] = 102_152209005
> (XEN) l4 = ffff830152209000
> (XEN) l4_index = 0
> (XEN) l4[0] = 152208003
> (XEN) l3 = ffff830152208000
> (XEN) l3_index = 1
> (XEN) l3[1] = 0
> (XEN) l3[1] not present
>
> My understanding of what is happening here is that page table mappings are
> missing from VT-d's page table, mapping machine physical addresses to my PV
> guest's physical addresses. I have had a look at iommu_populate_page_table
> and I dumped the mappings as they are being setup but couldn't see a mapping
> for the GPA 0x7c584000 above?
>
> Has anyone else encountered this issue?
Yes. And it was fixed by running a PV guest with 'iommu=soft' as Linux kernel
command line argument.
--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home