Hi all,
I am having a problem with Xen 4.0.1, PCI Passthrough with
VT-d and Linux PV Guests, and I was wondering if anyone else had seen it.
In both Dom 0 and Dom U’s I am using 64bit PV-OPS 2.6.32.26
Kernels from Jeremy Fitzhartridge’s Git repo.
I am using dual port SR-IOV NIC’s to test, passing
through physical functions only.
Passthrough appears to work, I can passthrough the NIC and
it will appear in the guest with lspci.
The guest detects the new device and loads the driver to
service the NIC, as you would expect.
The guest is complaining about the NIC being hung, the
message “Detected Tx Unit Hang...” is appearing in
the system log on the guest.
In the Xen log, VT-d is producing errors similar to this one;
(XEN) [VT-D]iommu.c:824: iommu_fault_status: Primary Pending
Fault
(XEN) [VT-D]iommu.c:799: DMAR:[DMA Read] Request device
[03:00.0] fault addr 7c584000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu = ffff83016fffa5f0 bdf =
3:0.0 gmfn = 7c584
(XEN) root_entry = ffff83016ff38000
(XEN) root_entry[3] = 14d90a001
(XEN) context = ffff83014d90a000
(XEN) context[0] = 102_152209005
(XEN) l4 = ffff830152209000
(XEN) l4_index = 0
(XEN) l4[0] = 152208003
(XEN) l3 = ffff830152208000
(XEN) l3_index = 1
(XEN) l3[1] = 0
(XEN) l3[1] not present
My understanding of what is happening here is that page
table mappings are missing from VT-d’s page table, mapping machine physical
addresses to my PV guest’s physical addresses. I have
had a look at iommu_populate_page_table and I dumped the mappings as they are
being setup but couldn’t see a mapping for the GPA 0x7c584000 above?
Has anyone else encountered this issue?
Thanks,
Ray Kinsella
Home