On Wed, 2011-02-16 at 22:17 +0000, Konrad Rzeszutek Wilk wrote:
> I am proposing these three patches for 2.6.39.
>
> The first is to take advantage of the new method of requesting
> a Linux IRQ and providing the Xen PIRQ value. The second
> makes it possible for a PV guest to bootup if the backend has provided
> incorrect values. [*2]
I approve of being liberal in what is accepted but do we also have a
handle on why the backend is providing incorrect values in the first
place?
>
> Lastly, the third is to remove deprecated code.
>
> Konrad Rzeszutek Wilk (2):
> pci/xen: Use xen_allocate_pirq_msi
> xen-pcifront: Sanity check the MSI/MSI-X values
>
> Tejun Heo (1):
> xen-pcifront: don't use flush_scheduled_work()
>
> arch/x86/pci/xen.c | 6 +++---
> drivers/pci/xen-pcifront.c | 20 +++++++++++++++-----
> 2 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
> index 25cd4a0..6432f75 100644
> --- a/arch/x86/pci/xen.c
> +++ b/arch/x86/pci/xen.c
> @@ -157,14 +157,14 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int
> nvec, int type)
> goto error;
> i = 0;
> list_for_each_entry(msidesc, &dev->msi_list, list) {
> - irq = xen_allocate_pirq(v[i], 0, /* not sharable */
> + xen_allocate_pirq_msi(
> (type == PCI_CAP_ID_MSIX) ?
> - "pcifront-msi-x" : "pcifront-msi");
> + "pcifront-msi-x" : "pcifront-msi",
> + &irq, &v[i], XEN_ALLOC_IRQ);
> if (irq < 0) {
> ret = -1;
> goto free;
> }
> -
> ret = set_irq_msi(irq, msidesc);
> if (ret)
> goto error_while;
> diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
> index 3a5a6fc..dd615d9 100644
> --- a/drivers/pci/xen-pcifront.c
> +++ b/drivers/pci/xen-pcifront.c
> @@ -277,13 +277,20 @@ static int pci_frontend_enable_msix(struct pci_dev *dev,
> if (likely(!err)) {
> if (likely(!op.value)) {
> /* we get the result */
> - for (i = 0; i < nvec; i++)
> + for (i = 0; i < nvec; i++) {
> + if (op.msix_entries[i].vector <= 0) {
> + dev_warn(&dev->dev, "MSI-X entry %d" \
> + " is zero!\n", i);
> + err = -EINVAL;
> + continue;
> + }
> *(*vector+i) = op.msix_entries[i].vector;
> - return 0;
> + }
> + return err;
> } else {
> printk(KERN_DEBUG "enable msix get value %x\n",
> op.value);
> - return op.value;
> + return err;
> }
> } else {
> dev_err(&dev->dev, "enable msix get err %x\n", err);
> @@ -325,6 +332,10 @@ static int pci_frontend_enable_msi(struct pci_dev *dev,
> int **vector)
> err = do_pci_op(pdev, &op);
> if (likely(!err)) {
> *(*vector) = op.value;
> + if (op.value <= 0) {
> + dev_warn(&dev->dev, "MSI entry is zero!\n");
> + err = -EINVAL;
> + }
> } else {
> dev_err(&dev->dev, "pci frontend enable msi failed for dev "
> "%x:%x\n", op.bus, op.devfn);
> @@ -733,8 +744,7 @@ static void free_pdev(struct pcifront_device *pdev)
>
> pcifront_free_roots(pdev);
>
> - /*For PCIE_AER error handling job*/
> - flush_scheduled_work();
> + cancel_work_sync(&pdev->op_work);
>
> if (pdev->irq >= 0)
> unbind_from_irqhandler(pdev->irq, pdev);
>
>
> [*2]: as so:
>
> 0.877864] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
> [ 0.877874] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> [ 0.877957] e1000e 0000:00:00.0: enabling device (0000 -> 0002)
> [ 0.878054] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ27
> [ 0.878056] e1000e 0000:00:00.0: setting latency timer to 64
> [ 0.879924] e1000e 0000:00:00.0: MSI-X entry 0 is zero!
> [ 0.879935] e1000e 0000:00:00.0: MSI-X entry 1 is zero!
> [ 0.879940] e1000e 0000:00:00.0: MSI-X entry 2 is zero!
> [ 0.880207] e1000e 0000:00:00.0: (unregistered net_device): Failed to
> initialize MSI-X interrupts. Falling back to MSI interrupts.
> [ 0.880730] e1000e 0000:00:00.0: MSI entry is zero!
> [ 0.880788] e1000e 0000:00:00.0: (unregistered net_device): Failed to
> initialize MSI interrupts. Falling back to legacy interrupts.
> [ 0.880945] e1000e 0000:00:00.0: Disabling ASPM L0s
> [ 0.977188] e1000e 0000:00:00.0: eth0: (PCI Express:2.5GB/s:Width x1)
> 00:1b:21:61:49:00
> [ 0.977201] e1000e 0000:00:00.0: eth0: Intel(R) PRO/1000 Network Connection
> [ 0.977217] e1000e 0000:00:00.0: eth0: MAC: 3, PHY: 8, PBA No: E46981-003
> ...
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home