Re: [Xen-devel] [PATCH] Re: blktap2 problem with pvops kernel 2.

The way your patch + zfs-24 patch work for me ( Nexenta 3.0 Xen Sample Image and profile)

root@LucidSRV:~/NexentaStor-Community-3.0.2# cat *.cfg
# This config file use for boot installation guest domain NexentaStor, hereinafter referred to as DomU

# Work directory
# work_dir = '/full/path/to/directory/with/unpacked/nexentastor-xen-image'
work_dir = '/root/NexentaStor-Community-3.0.2'

# Names of disks
disk_1_name = 'syspool.img'
disk_2_name = 'data_disk1.img'
disk_3_name = 'data_disk2.img'
disk_4_name = 'data_disk3.img'

# Bootloader for boot DomU
bootloader = "/usr/local/bin/pygrub"

# Memory for DomU, in MB
memory = 1024

# Name of DomU
name = "NexentaStor-Community-3.0.2"

# Network interfaces for DomU
# You can change the mac address of your own needs.
# mac=00:16:3E:xx:xx:xx
vif =     [
    'mac=00:16:3E:00:00:01',
'mac=00:16:3E:00:00:02'
    ]
# vif=['bridge=eth0']

# Disk's for guest domain.
# Format for added disk:
# for file devices disk:
#     'file:/full/path/to/disk_in_file,num_disk_in_DomU,access_mode_for_disk_in_DomU'
# for tap device disk (for example VHD):
#    'tap:tapdisk:vhd:/full/path/to/disk_in_file,num_disk_in_DomU,access_mode_for_disk_in_DomU'
# for physical devices disk:
#    'phy:/dev/physical_devices_in_Dom0,num_disk_in_DomU,access_mode_for_disk_in_DomU'
# num_disk_in_DomU = xvda,xvdb,xvdc,xvde,...
# access_mode_for_disk_in_DomU = w - read-write mode, r = read-only mode
#
# We recommend using the VHD disc format (blktap2 device driver).
# http://wiki.xensource.com/xenwiki/blktap2
disk =     [
    'tap:tapdisk:vhd:' + work_dir + '/' + disk_1_name + ',xvda,w',
    'tap:tapdisk:vhd:' + work_dir + '/' + disk_2_name + ',xvdb,w',
    'tap:tapdisk:vhd:' + work_dir + '/' + disk_3_name + ',xvdc,w',
    'tap:tapdisk:vhd:' + work_dir + '/' + disk_4_name + ',xvde,w',
    ]

# Configure the behaviour when a domain exits. There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash. For each of these you
# may specify:
#
#   "destroy",        meaning that the domain is cleaned up as normal;
#   "restart",        meaning that a new domain is started in place of the old
#                     one;
#   "preserve",       meaning that no clean-up is done until the domain is
#                     manually destroyed (using xm destroy, for example); or
#   "rename-restart", meaning that the old domain is not cleaned up, but is
#                     renamed and a new domain started in its place.
#
# In the event a domain stops due to a crash, you have the additional options:
#
#   "coredump-destroy", meaning dump the crashed domain's core and then destroy;
#   "coredump-restart', meaning dump the crashed domain's core and the restart.

root@LucidSRV:~/NexentaStor-Community-3.0.2# xm create -c nexentastor-community-3.0.2-xen.cfg
Using config file "./nexentastor-community-3.0.2-xen.cfg".

root@LucidSRV:~/NexentaStor-Community-3.0.2# Error: Device 51952 not connected
^C

root@LucidSRV:~/NexentaStor-Community-3.0.2# xm list
Name                                        ID   Mem VCPUs      State   Time(s)
Domain-0                                     0 7189     4     r-----     38.1

root@LucidSRV:~/NexentaStor-Community-3.0.2# xm create -c nexentastor-community-3.0.2-xen.cfg
Using config file "./nexentastor-community-3.0.2-xen.cfg".
Error: Device /dev/xvdp (51952, tap2) is already connected.

Boris
--- On Mon, 5/31/10, eXeC001er <execooler@xxxxxxxxx> wrote:

From: eXeC001er <execooler@xxxxxxxxx>
Subject: Re: [Xen-devel] [PATCH] Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>, "Keir Fraser" <keir.fraser@xxxxxxxxxxxxx>
Date: Monday, May 31, 2010, 12:28 PM

I have same error with xen-unstable.

in attach patch for xen-4.0-testing.hg

Signed-off-by: eXeC001er <execooler@xxxxxxxxx>
---

2010/5/31 Boris Derzhavets <bderzhavets@xxxxxxxxx>

Xen-unstable patched via yours patch , built and installed on top of Ubuntu 10.04.
Dom0 loaded with 2.6.32.14 pvops ( 2.6.32.10 same results)
Environment:-

host                   : LucidSRV
release                : 2.6.32.14
version                : #6 SMP Mon May 31 18:08:00 MSD 2010
machine                : x86_64
nr_cpus                : 4
nr_nodes               : 1
cores_per_socket       : 4
threads_per_core       : 1
cpu_mhz                : 2833
hw_caps                : bfebfbff:20100800:00000000:00000940:0408e3fd:00000000:00000001:00000000
virt_caps              : hvm
total_memory           : 8190
free_memory            : 2052
free_cpus              : 0
xen_major              : 4
xen_minor              : 1
xen_extra              : -unstable
xen_caps               : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler          : credit
xen_pagesize           : 4096
platform_params        : virt_start=0xffff800000000000
xen_changeset          : Fri May 28 10:54:07 2010 +0100 21492:96917cf25bf3
xen_commandline        :
cc_compiler            : gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)
cc_compile_by          : root
cc_compile_domain      :
cc_compile_date        : Mon May 31 19:00:21 MSD 2010
xend_config_format     : 4

Attempted to load F13 PV DomU ( working fine inder Xen 4.0 & 2.6.32.14)

┌────────────────────────────────────────────────────────────────────────┐
│ Fedora (2.6.33.3-85.fc13.x86_64)                                       │
│                                                                        │
│                                                                        │
│                                                                        │
│                                                                        │
│                                                                        │
│                                                                        │
│                                                                        │
└────────────────────────────────────────────────────────────────────────┘
     Use the ^ and v keys to select which entry is highlighted.
     Press enter to boot the selected OS, 'e' to edit the
     commands before booting, 'a' to modify the kernel arguments
     before booting, or 'c' for a command line.

root@LucidSRV:/home/boris/fedora# Error: (4, 'Out of memory', "panic: xc_dom_boot.c:144: xc_dom_boot_mem_init: can't allocate low memory for domain")

Boris.

--- On Mon, 5/31/10, eXeC001er <execooler@xxxxxxxxx> wrote:

From: eXeC001er <execooler@xxxxxxxxx>
Subject: Re: [Xen-devel] [PATCH] Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1

To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>, "Keir Fraser" <keir.fraser@xxxxxxxxxxxxx>
Date: Monday, May 31, 2010, 6:27 AM

Patch for xen-unstable.hg

2010/5/31 Boris Derzhavets <bderzhavets@xxxxxxxxx>

I've attempted to process patch for xen-4.0.0-0.7.f12.src.rpm it gives an errors.
Is it written for xen 4.0 ? I did some manual check .

Boris.

--- On Sun, 5/30/10, eXeC001er <execooler@xxxxxxxxx> wrote:

From: eXeC001er <execooler@xxxxxxxxx>
Subject: Re: [Xen-devel] [PATCH] Re: blktap2 problem with pvops kernel 2.6.32.13 and xen 4.0-rc1
To: "Keir Fraser" <keir.fraser@xxxxxxxxxxxxx>
Cc: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>, "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Date: Sunday, May 30, 2010, 11:00 AM

this patch remove problems with blktap2 devices:

1. If we use blktap2 disk device then DomU does not boot. Returned error: File 'vhd:/path/.../disk.img' doesn't exist.

2. Created blktap2 disk device does not accessible immediately after connecting: If we use pygrub then DomU does not boot. Returned error: Disk is not accessible.

Signed-off-by: eXeC001er <execooler@xxxxxxxxx>
---

2010/5/30 Keir Fraser <keir.fraser@xxxxxxxxxxxxx>
Needs a patch description and a signed-off-by line.

-- Keir

On 30/05/2010 13:21, "eXeC001er" <execooler@xxxxxxxxx> wrote:

> My python-experience is small, but i tied to rewrite.
> New in attach.
>
> 2010/5/30 Keir Fraser <keir.fraser@xxxxxxxxxxxxx>
>> On 30/05/2010 11:37, "Pasi Kärkkäinen" <pasik@xxxxxx> wrote:
>>
>>> On Sun, May 30, 2010 at 02:02:06PM +0400, eXeC001er wrote:
>>>> I have already sent a patch 1 weak ago. (blktap2_control_func.patch)
>>>> repeat in attach.
>>>> Thanks.
>>>
>>> Ok, thanks.
>>>
>>> Keir: I guess this is not committed yet?
>>
>> I'm not too happy about the sleep(5). I guess if there's no better solution
>> coming up I should just whack this patch in?
>>
>> -- Keir
>>
>>> -- Pasi
>>>
>>>> 2010/5/30 Pasi Kärkkäinen <[1]pasik@xxxxxx>
>>>>
>>>> On Sun, May 30, 2010 at 11:17:51AM +0400, eXeC001er wrote:
>>>>> I've attempted to install Nexenta Core 3 image under Xen 4.0
>>>> (2.6.32.13
>>>>> pvops) on top of F13. Sample nexenta3.cfg profile contains 4
>>>> lines like
>>>>> this:-
>>>>>
>>>>> disk=['tat:tapdisk:vhd:/path/../disk.img,xvda,w'] ( from sample)
>>>>>
>>>>> It generates message
>>>>> Â File 'vhd:/path/.../disk.img' doesn't exist.
>>>>>
>>>>> Boris.
>>>>> P.S. It was already in one of the threads @xen-users.
>>>>>
>>>>> This bug in "def _parse_uname(uname):"
>>>> (tools/python/xen/util/blkif.py)
>>>>> (taptype, fn) = fn.split(":", 1) >>>>>>Â (taptype, fn) =
>>>> fn.split(":",
>>>>> 2)[1:3]
>>>>
>>>> Can you send a proper patch, as unified diff (diff -u), with a
>>>> Signed-off-by line?
>>>> -- Pasi
>>>>
>>>> References
>>>>
>>>> Visible links
>>>> 1. mailto:pasik@xxxxxx
>>>
>>>> diff -r d0420ab97345 tools/python/xen/util/blkif.py
>>>> --- a/tools/python/xen/util/blkif.py Fri May 21 16:21:39 2010 +0100
>>>> +++ b/tools/python/xen/util/blkif.py Sat May 22 01:21:15 2010 +0400
>>>> @@ -87,7 +87,7 @@
>>>> fn = "/dev/%s" %(fn,)
>>>>
>>>> if typ in ("tap", "tap2"):
>>>> - (taptype, fn) = fn.split(":", 1)
>>>> + (taptype, fn) = fn.split(":", 2)[1:]
>>>> return (fn, taptype)
>>>>
>>>> def blkdev_uname_to_file(uname):
>>>> diff -r d0420ab97345 tools/python/xen/xend/XendDomainInfo.py
>>>> --- a/tools/python/xen/xend/XendDomainInfo.py Fri May 21 16:21:39 2010
>>>> +0100
>>>> +++ b/tools/python/xen/xend/XendDomainInfo.py Sat May 22 01:21:15 2010
>>>> +0400
>>>> @@ -3292,6 +3292,7 @@
>>>> fn = BOOTLOADER_LOOPBACK_DEVICE
>>>>
>>>> try:
>>>> + time.sleep(5)
>>>> blcfg = bootloader(blexec, fn, self, False,
>>>> bootloader_args, kernel, ramdisk, args)
>>>> finally:
>>>> @@ -3299,7 +3300,7 @@

>>>> log.info <http://log.info> ("Unmounting %s from %s." %

>>>> (fn, BOOTLOADER_LOOPBACK_DEVICE))
>>>>
>>>> - dom0.destroyDevice('tap', BOOTLOADER_LOOPBACK_DEVICE)
>>>> + dom0.destroyDevice(devtype,
>>>> BOOTLOADER_LOOPBACK_DEVICE)
>>>>
>>>> if blcfg is None:
>>>> msg = "Had a bootloader specified, but can't find disk"
>>>
>>
>>
>
>

-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

WARNING - OLD ARCHIVES

xen-devel

Re: [Xen-devel] [PATCH] Re: blktap2 problem with pvops kernel 2.6.32.13