WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOA

To: Pasi Kärkkäinen <pasik@xxxxxx>
Subject: Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9
From: kishore kumar <bodkekumar@xxxxxxxxx>
Date: Wed, 17 Mar 2010 15:20:13 -0700
Cc: Jeremy Fitzhardinge <jeremy@xxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Wed, 17 Mar 2010 15:25:13 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:cc:content-type; bh=wxDqC9rsLYqeze5UtBhuljB5H6yi+lSWuwkzvOp+b70=; b=dm6i8H93f7skR50BMg2giL7eIDI1ik7GiTgXNp2ChxquOsVTKMW4LkxXOyiS0GDjus SJnk9U48akyCLzEJuOSxcCdUDqRzuimVe6NRms57CLtr+HVlbXIT9sxD5XixUXNUcs7c XruiLRW+Fvashjul5nFQkOj0WlIXnq1D0EFgE=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=oft9PMyDtUx9mEnTPuYWbnub8j1wBNBu/y9fNd/Aofr5P6r2EixawRcqsBeKR+W/ts ACfhAr7FA+xXStn71EPOaqBMb6X1HLlu5uLC2jwTwBaxbFncIdeONKzt4ri0Tv1BmHkF Af2Hneuu7OwaaXTdu3GjIRTYclAModBYZ4QbA=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <20100316231804.GE1878@xxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <20100316194831.GX1878@xxxxxxxxxxx> <20100316202056.GZ1878@xxxxxxxxxxx> <9f975f341003161416k78eb1717pb08fdcb2e4cddfef@xxxxxxxxxxxxxx> <20100316212928.GA1878@xxxxxxxxxxx> <9f975f341003161456w59d2a65bj31ea43e37972fe17@xxxxxxxxxxxxxx> <20100316220353.GC1878@xxxxxxxxxxx> <9f975f341003161522q7786a910mfe65e79d937bb03@xxxxxxxxxxxxxx> <20100316222927.GD1878@xxxxxxxxxxx> <9f975f341003161540l2ff1404ft2a6698d0a8738348@xxxxxxxxxxxxxx> <20100316231804.GE1878@xxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Here is the output of df -h and cat /etc/fstab of my machine.
 
Please let me know your thoughts.
 
[root@localhost kishore]# df -h

Filesystem Size Used Avail Use% Mounted on

/dev/mapper/VolGroup01-LogVol00

                                    223G 29G 182G 14% /

/dev/sda1 99M 81M 13M 87% /boot

tmpfs 757M 0 757M 0% /dev/shm

[root@localhost kishore]# cat /etc/fstab

/dev/VolGroup01/LogVol00 / ext3 defaults 1 1

LABEL=/boot /boot ext3 defaults 1 2

tmpfs /dev/shm tmpfs defaults 0 0

devpts /dev/pts devpts gid=5,mode=620 0 0

sysfs /sys sysfs defaults 0 0

proc /proc proc defaults 0 0

/dev/VolGroup01/LogVol01 swap swap defaults 0 0

[root@localhost kishore]#



On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote:
>    I am not sure.  Can you please let me know how to check this? any command
>    ??

well simple "df -h" will show it. and also "cat /etc/fstab".
You can also check it from your grub configuration.. from the working baremetal (non-Xen) entry.

-- Pasi

>
>    On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
>      On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote:
>      >    attached  is the log captured in with the word document .
>      >
>
>      Scanning logical volumes
>       Reading all physical volumes.  This may take a while...
>      Activating logical volumes
>       Volume group "VolGroup01" not found
>      Trying to resume from /dev/VolGroup01/LogVol01
>      Unable to access resume device (/dev/VolGroup01/LogVol01)
>      Creating root device.
>      Mounting root filesystem.
>      mount: could not find filesystem '/dev/root'
>      Setting up other filesystems.
>      Setting up new root fs
>      setuproot: moving /dev failed: No such file or directory
>      no fstab.sys, mounting internal defaults
>      setuproot: error mounting /proc: No such file or directory
>      setuproot: error mounting /sys: No such file or directory
>      Switching to new root and running init.
>      unmounting old /dev
>      unmounting old /proc
>      unmounting old /sys
>      switchroot: mount failed: No such file or directory
>      init used greatest stack depth: 4088 bytes left
>      Kernel panic - not syncing: Attempted to kill init!
>
>      So it seems it gets all the way to executing the initrd image,
>      which then fails to mount the root fs.
>
>      Earlier in the log:
>      ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>      ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133
>      ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>      ata1.00: configured for UDMA/133
>      scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72102 STBO PQ: 0
>      ANSI: 5
>      sd 0:0:0:0: Attached scsi generic sg0 type 0
>      sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>      sd 0:0:0:0: [sda] Write Protect is off
>      sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>      sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>      support DPO or FUA
>       sda: sda1 sda2
>      sd 0:0:0:0: [sda] Attached SCSI disk
>
>      so /dev/sda was detected. Is your root lvm volume on /dev/sda ?
>      Is /dev/VolGroup01/LogVol01 really your root fs?
>
>      -- Pasi
>
>      >
>      >
>      >    On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen
>      <[1][2]pasik@xxxxxx> wrote:
>      >
>      >      On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar wrote:
>      >      >    Please find the attached log file after fixing the dom 0
>      kernel cmd
>      >      line
>      >      >    as below
>      >      >
>      >      >    ro root=/dev/VolGroup01/LogVol00 console=hvc0
>      earlyprintk=xen
>      >      nomodeset
>      >      >
>      >
>      >      There's something wrong with the log, the dom0 kernel parts are
>      all on
>      >      one line..
>      >      It's really difficult to read it.
>      >
>      >      -- Pasi
>      >
>      >      >    Thanks
>      >      >
>      >      >
>      >      >    On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen
>      >      <[1][2][3]pasik@xxxxxx> wrote:
>      >      >
>      >      >      On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore kumar
>      wrote:
>      >      >      >    I did below steps.
>      >      >      >
>      >      >      >
>      >      >      >     I pulled DOM 0 kernel from
>      >      >      >    git clone
>      >      >
>      >
>      git://[1][2][3][4]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >    linux-2.6-xen
>      >      >      >
>      >      >      >    cd linux-2.6-xen
>      >      >      >
>      >      >      >    make clean
>      >      >      >
>      >      >      >    cp -a .config .config-old
>      >      >      >
>      >      >      >    wget -O .config
>      >      >      >
>      >      >
>      >
>       [2][3][4][5]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >
>      >      >      >    make oldconfig
>      >      >      >
>      >      >      >    make bzImage
>      >      >      >
>      >      >      >    make modules
>      >      >      >
>      >      >      >    make modules_install
>      >      >      >
>      >      >      >    cp -a .config /boot/config-2.6.32.9
>      >      >      >
>      >      >      >    cp -a System.map /boot/System.map-2.6.32.9
>      >      >      >
>      >      >      >    cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.9
>      >      >      >
>      >      >      >    and modified the grub.conf as below
>      >      >      >
>      >      >      >
>      >      >      >    Root(hd0,0)
>      >      >      >
>      >      >      >     kernel /xen.gz console=vga,com1 com1=115200,8n1
>      msi=1
>      >      iommu=1
>      >      >      >
>      >      >      >     module /vmlinuz-2.6.32.9 ro
>      root=/dev/VolGroup01/LogVo100
>      >       rhgb
>      >      >      quiet
>      >      >      >
>      >      >      >     module /initrd-2.6.32.9.img
>      >      >      >
>      >      >      >
>      >      >      >    and rebooted the machine.  Then It booted with some
>      xen
>      >      messages
>      >      >      and
>      >      >      >    stopped.  Those were the messages captured from
>      serial
>      >      console.
>      >      >      >
>      >      >      >    Please let me know if I did something wrong here.
>      >      >      >
>      >      >
>      >      >      Please fix the kernel cmdline based on my earlier email,
>      and
>      >      capture and
>      >      >      post the
>      >      >      serial console log again!
>      >      >
>      >      >      -- Pasi
>      >      >      >
>      >      >      >
>      >      >      >    On Tue, Mar 16, 2010 at 1:20 PM, Pasi Kärkkäinen
>      >      >      <[3][4][5][6]pasik@xxxxxx> wrote:
>      >      >      >
>      >      >      >      On Tue, Mar 16, 2010 at 01:16:28PM -0700, Jeremy
>      >      Fitzhardinge
>      >      >      wrote:
>      >      >      >      > On 03/16/2010 12:48 PM, Pasi Kärkkäinen wrote:
>      >      >      >      >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, Pasi
>      >      Kärkkäinen
>      >      >      wrote:
>      >      >      >      >>
>      >      >      >      >>> On Tue, Mar 16, 2010 at 10:32:17AM -0700,
>      kishore
>      >      kumar
>      >      >      wrote:
>      >      >      >      >>>
>      >      >      >      >>>>     Attached is the output captured from
>      serial
>      >      console.
>      >      >      >      >>>>
>      >      >      >      >>>>     Machine does not boot after compiling xen
>      3.4.3
>      >      with
>      >      >      pv_ops dom
>      >      >      >      0 kernel.
>      >      >      >      >>>>
>      >      >      >      >>>>     Please let me know what is going wrong
>      here.
>      >      >      >      >>>>
>      >      >      >      >>>>
>      >      >      >      >>> Ok this looks like a bug that is already being
>      sorted
>      >      out on
>      >      >      >      xen-devel mailinglist.
>      >      >      >      >>> I added CC to xen-devel.
>      >      >      >      >>>
>      >      >      >      >>>
>      >      >      >      >>
>      >      >      >      >
>      >      >      >      > Those messages are not a problem in themselves,
>      but the
>      >      related
>      >      >      >      problem
>      >      >      >      > is believed to be fixed in current
>      xen/stable-2.6.32.x.
>      >       It
>      >      >      looks like
>      >      >      >      > the output stops there because the Xen console
>      isn't set
>      >      up
>      >      >      properly
>      >      >      >      for
>      >      >      >      > some reason.
>      >      >      >      >
>      >      >      >
>      >      >      >      Yeah, remove "rhgb quiet" from the options.. the
>      dom0
>      >      kernel
>      >      >      cmdline
>      >      >      >      should be like this:
>      >      >      >      ro root=/dev/VolGroup01/LogVol00 console=hvc0
>      >      earlyprintk=xen
>      >      >      nomodeset
>      >      >      >      -- Pasi
>      >      >      >
>      >      >      > References
>      >      >      >
>      >      >      >    Visible links
>      >      >      >    1.
>      >
>       [5][6][7]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >    2.
>      >      >
>      >
>      [6][7][8]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >    3. mailto:[7][8][9]pasik@xxxxxx
>      >      >
>      >      > References
>      >      >
>      >      >    Visible links
>      >      >    1. mailto:[9][10]pasik@xxxxxx
>      >      >    2.
>      >
>       [10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >    3.
>      >
>       [11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >    4. mailto:[12][13]pasik@xxxxxx
>      >      >    5.
>      >
>       [13][14]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >    6.
>      >
>       [14][15]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >    7. mailto:[15][16]pasik@xxxxxx
>      >      > Asserting Post complete GPIO!!!
>      >      > Transfer control to CSM 16-bit binary for legacy boot
>      >      >  __  __            _____ _  _    _____             _  _
>      >      >  \ \/ /___ _ __   |___ /| || |  |___ /    _ __ ___| || |     _
>      __  _
>      >      __ ___
>      >      >   \  // _ \ '_ \    |_ \| || |_   |_ \ __| '__/ __| || |_ __|
>      '_ \|
>      >      '__/ _ \
>      >      >   /  \  __/ | | |  ___) |__   _| ___) |__| | | (__|__   _|__|
>      |_) | |
>      >      |  __/
>      >      >  /_/\_\___|_| |_| |____(_) |_|(_)____/   |_|  \___|  |_|    |
>      .__/|_|
>      >       \___|
>      >      >                                                             |_|
>      >      > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) (gcc
>      version
>      >      4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT 2010
>      >      > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000
>      >      19924:6e72f8c3c017
>      >      > (XEN) Command line: console=vga,com1 com1=115200,8n1 msi=1
>      iommu=1
>      >      > (XEN) Video information:
>      >      > (XEN)  VGA is text mode 80x25, font 8x16
>      >      > (XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
>      >      > (XEN)  EDID info not retrieved because no DDC retrieval method
>      >      detected
>      >      > (XEN) Disc information:
>      >      > (XEN)  Found 1 MBR signatures
>      >      > (XEN)  Found 1 EDD information structures
>      >      > (XEN) Xen-e820 RAM map:
>      >      > (XEN)  0000000000000000 - 000000000009d000 (usable)
>      >      > (XEN)  000000000009d000 - 00000000000a0000 (reserved)
>      >      > (XEN)  00000000000e0000 - 0000000000100000 (reserved)
>      >      > (XEN)  0000000000100000 - 000000006d597000 (usable)
>      >      > (XEN)  000000006d597000 - 000000006d686000 (reserved)
>      >      > (XEN)  000000006d686000 - 000000006f598000 (usable)
>      >      > (XEN)  000000006f598000 - 000000006f59a000 (reserved)
>      >      > (XEN)  000000006f59a000 - 000000006f5af000 (ACPI NVS)
>      >      > (XEN)  000000006f5af000 - 000000006f5d9000 (reserved)
>      >      > (XEN)  000000006f5d9000 - 000000006f5f9000 (ACPI data)
>      >      > (XEN)  000000006f5f9000 - 000000006f6df000 (ACPI NVS)
>      >      > (XEN)  000000006f6df000 - 000000006f700000 (ACPI data)
>      >      > (XEN)  000000006f700000 - 0000000080000000 (reserved)
>      >      > (XEN)  00000000a0000000 - 00000000b0000000 (reserved)
>      >      > (XEN)  00000000fc000000 - 00000000fd000000 (reserved)
>      >      > (XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
>      >      > (XEN)  00000000ffc00000 - 0000000100000000 (reserved)
>      >      > (XEN) System RAM: 1780MB (1823000kB)
>      >      > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL )
>      >      > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL  THRLY           0
>      >      1000013)
>      >      > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL  THRLY           0
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL  THRLY           3
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: FACS 6F5F9000, 0040
>      >      > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL  THRLY           0
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL  THRLY           0
>      MSFT
>      >       100000D)
>      >      > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1  INTEL SSDT  PM     4000
>      INTL
>      >      20061109)
>      >      > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL  THRLY           1
>      MSFT
>      >       100000D)
>      >      > (XEN) Domain heap initialised
>      >      > (XEN) Processor #0 6:12 APIC version 21
>      >      > (XEN) Processor #2 6:12 APIC version 21
>      >      > (XEN) Processor #4 6:12 APIC version 21
>      >      > (XEN) Processor #16 6:12 APIC version 21
>      >      > (XEN) Processor #18 6:12 APIC version 21
>      >      > (XEN) Processor #20 6:12 APIC version 21
>      >      > (XEN) Processor #1 6:12 APIC version 21
>      >      > (XEN) Processor #3 6:12 APIC version 21
>      >      > (XEN) Processor #5 6:12 APIC version 21
>      >      > (XEN) Processor #17 6:12 APIC version 21
>      >      > (XEN) Processor #19 6:12 APIC version 21
>      >      > (XEN) Processor #21 6:12 APIC version 21
>      >      > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
>      0-23
>      >      > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI
>      24-47
>      >      > (XEN) Enabling APIC mode:  Phys.  Using 2 I/O APICs
>      >      > (XEN) Intel VT-d DMAR tables have been parsed.
>      >      > (XEN) Using scheduler: SMP Credit Scheduler (credit)
>      >      > (XEN) Detected 3200.207 MHz processor.
>      >      > (XEN) VMX: Supported advanced features:
>      >      > (XEN)  - APIC MMIO access virtualisation
>      >      > (XEN)  - APIC TPR shadow
>      >      > (XEN)  - Extended Page Tables (EPT)
>      >      > (XEN)  - Virtual-Processor Identifiers (VPID)
>      >      > (XEN)  - Virtual NMI
>      >      > (XEN)  - MSR direct-access bitmap
>      >      > (XEN) VMX: EPT is available.
>      >      > (XEN) VMX: VPID is available.
>      >      > (XEN) HVM: VMX enabled
>      >      > (XEN) HVM: Hardware Assisted Paging detected.
>      >      > (XEN) CPU0: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 1/2 eip 88000
>      >      > (XEN) CPU1: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 2/4 eip 88000
>      >      > (XEN) CPU2: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 3/16 eip 88000
>      >      > (XEN) CPU3: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 4/18 eip 88000
>      >      > (XEN) CPU4: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 5/20 eip 88000
>      >      > (XEN) CPU5: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 6/1 eip 88000
>      >      > (XEN) CPU6: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 7/3 eip 88000
>      >      > (XEN) CPU7: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 8/5 eip 88000
>      >      > (XEN) CPU8: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 9/17 eip 88000
>      >      > (XEN) CPU9: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 10/19 eip 88000
>      >      > (XEN) CPU10: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Booting processor 11/21 eip 88000
>      >      > (XEN) CPU11: Intel Genuine Intel(R) CPU             000  @
>      3.20GHz
>      >      stepping 00
>      >      > (XEN) Total of 12 processors activated.
>      >      > (XEN) ENABLING IO-APIC IRQs
>      >      > (XEN)  -> Using new ACK method
>      >      > (XEN) checking TSC synchronization across 12 CPUs: passed.
>      >      > (XEN) Platform timer is 14.318MHz HPET
>      >      > ?(XEN) Brought up 12 CPUs
>      >      > (XEN) Intel VT-d Snoop Control supported.
>      >      > (XEN) Intel VT-d DMA Passthrough not supported.
>      >      > (XEN) Intel VT-d Queued Invalidation supported.
>      >      > (XEN) Intel VT-d Interrupt Remapping supported.
>      >      > (XEN) I/O virtualisation enabled
>      >      > (XEN) I/O virtualisation for PV guests disabled
>      >      > (XEN) xenoprof: Initialization failed. Intel processor model 44
>      for P6
>      >      class family is not supported
>      >      > (XEN) *** LOADING DOMAIN 0 ***
>      >      > (XEN)  Xen  kernel: 64-bit, lsb, compat32
>      >      > (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->
>      0x26bb000
>      >      > (XEN) PHYSICAL MEMORY ARRANGEMENT:
>      >      > (XEN)  Dom0 alloc.:   0000000064000000->0000000068000000
>      (404490 pages
>      >      to be allocated)
>      >      > (XEN) VIRTUAL MEMORY ARRANGEMENT:
>      >      > (XEN)  Loaded kernel: ffffffff81000000->ffffffff826bb000
>      >      > (XEN)  Init. ramdisk: ffffffff826bb000->ffffffff82d0d800
>      >      > (XEN)  Phys-Mach map: ffffffff82d0e000->ffffffff83044050
>      >      > (XEN)  Start info:    ffffffff83045000->ffffffff830454b4
>      >      > (XEN)  Page tables:   ffffffff83046000->ffffffff83063000
>      >      > (XEN)  Boot stack:    ffffffff83063000->ffffffff83064000
>      >      > (XEN)  TOTAL:         ffffffff80000000->ffffffff83400000
>      >      > (XEN)  ENTRY ADDRESS: ffffffff819c1200
>      >      > (XEN) Dom0 has maximum 12 VCPUs
>      >      > (XEN) Scrubbing Free RAM: .done.
>      >      > (XEN) Xen trace buffers: disabled
>      >      > (XEN) Std. Loglevel: Errors and warnings
>      >      > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
>      warnings)
>      >      > (XEN) Xen is relinquishing VGA console.
>      >      > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to
>      switch
>      >      input to Xen)
>      >      > (XEN) Freed 128kB init memory.
>      >      > mapping kernel into physical memory
>      >      > Xen: setup ISA identity maps
>      >      > about to get started...
>      >      > Initializing cgroup subsys cpuset
>      >      > Initializing cgroup subsys cpu
>      >      > Linux version 2.6.32.9 (kishore@xxxxxxxxxxxxxxxxxxxxx) (gcc
>      version
>      >      4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 15:16:28 PDT
>      2010
>      >      > Command line: ro root=/dev/VolGroup01/LogVol00 console=hvc0
>      >      earlyprintk=xen nomodeset
>      >      > KERNEL supported cpus:
>      >      >   Intel GenuineIntel
>      >      >   AMD AuthenticAMD
>      >      >   Centaur CentaurHauls
>      >      > BIOS-provided physical RAM map:
>      >      >  Xen: 0000000000000000 - 000000000009d000 (usable)
>      >      >  Xen: 000000000009d000 - 0000000000100000 (reserved)
>      >      >  Xen: 0000000000100000 - 0000000066c0a000 (usable)
>      >      >  Xen: 000000006d597000 - 000000006d686000 (reserved)
>      >      >  Xen: 000000006f598000 - 000000006f59a000 (reserved)
>      >      >  Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS)
>      >      >  Xen: 000000006f5af000 - 000000006f5d9000 (reserved)
>      >      >  Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data)
>      >      >  Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS)
>      >      >  Xen: 000000006f6df000 - 000000006f700000 (ACPI data)
>      >      >  Xen: 000000006f700000 - 0000000080000000 (reserved)
>      >      >  Xen: 00000000a0000000 - 00000000b0000000 (reserved)
>      >      >  Xen: 00000000fc000000 - 00000000fd000000 (reserved)
>      >      >  Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
>      >      >  Xen: 00000000ffc00000 - 0000000100000000 (reserved)
>      >      > bootconsole [xenboot0] enabled
>      >      > DMI 2.4 present.
>      >      > last_pfn = 0x66c0a max_arch_pfn = 0x400000000
>      >      > init_memory_mapping: 0000000000000000-0000000066c0a000
>      >      > RAMDISK: 026bb000 - 02d0d800
>      >      > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL )
>      >      > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL  THRLY    00000000
>      >       01000013)
>      >      > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL  THRLY    00000000
>      MSFT
>      >      0100000D)
>      >      > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL  THRLY    00000003
>      MSFT
>      >      0100000D)
>      >      > ACPI: FACS 000000006f5f9000 00040
>      >      > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL  THRLY    00000000
>      MSFT
>      >      0100000D)
>      >      > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL  THRLY    00000000
>      MSFT
>      >      0100000D)
>      >      > ACPI: SSDT 000000006f5d9000 1FDDC (v01  INTEL SSDT  PM 00004000
>      INTL
>      >      20061109)
>      >      > ACPI:      000000006f6ee000 001D0 (v01 INTEL  THRLY    00000001
>      MSFT
>      >      0100000D)
>      >      > No NUMA configuration found
>      >      > Faking a node at 0000000000000000-0000000066c0a000
>      >      > Bootmem setup node 0 0000000000000000-0000000066c0a000
>      >      >   NODE_DATA [0000000000008000 - 000000000001ffff]
>      >      >   bootmap [0000000000020000 -  000000000002cd87] pages d
>      >      > (9 early reservations) ==> bootmem [0000000000 - 0066c0a000]
>      >      >   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000
>      -
>      >      0000001000]
>      >      >   #1 [0003046000 - 0003063000]   XEN PAGETABLES ==> [0003046000
>      -
>      >      0003063000]
>      >      >   #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000
>      -
>      >      0000008000]
>      >      >   #3 [0001000000 - 000269ae98]    TEXT DATA BSS ==> [0001000000
>      -
>      >      000269ae98]
>      >      >   #4 [00026bb000 - 0002d0d800]          RAMDISK ==> [00026bb000
>      -
>      >      0002d0d800]
>      >      >   #5 [0002d0e000 - 0003046000]   XEN START INFO ==> [0002d0e000
>      -
>      >      0003046000]
>      >      >   #6 [000269b000 - 000269b011]              BRK ==> [000269b000
>      -
>      >      000269b011]
>      >      >   #7 [0000100000 - 000041a000]          PGTABLE ==> [0000100000
>      -
>      >      000041a000]
>      >      >   #8 [0000001000 - 0000001030]        ACPI SLIT ==> [0000001000
>      -
>      >      0000001030]
>      >      > found SMP MP-table at [ffff8800000fd750] fd750
>      >      > Zone PFN ranges:
>      >      >   DMA      0x00000000 -> 0x00001000
>      >      >   DMA32    0x00001000 -> 0x00100000
>      >      >   Normal   0x00100000 -> 0x00100000
>      >      > Movable zone start PFN for each node
>      >      > early_node_map[2] active PFN ranges
>      >      >     0: 0x00000000 -> 0x0000009d
>      >      >     0: 0x00000100 -> 0x00066c0a
>      >      > ACPI: PM-Timer IO Port: 0x408
>      >      > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
>      >      > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
>      >      > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
>      >      > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
>      >      > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>      >      > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
>      >      > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24])
>      >      > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>      >      > ERROR: Unable to locate IOAPIC for GSI 2
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>      >      > ERROR: Unable to locate IOAPIC for GSI 9
>      >      > Using ACPI (MADT) for SMP configuration information
>      >      > ACPI: HPET id: 0x8086a401 base: 0xfed00000
>      >      > SMP: Allowing 12 CPUs, 0 hotplug CPUs
>      >      > PM: Registered nosave memory: 000000000009d000 -
>      0000000000100000
>      >      > Allocating PCI resources starting at b0000000 (gap:
>      b0000000:4c000000)
>      >      > Booting paravirtualized kernel on Xen
>      >      > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0)
>      >      > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
>      >      > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 s1928024 r8192
>      d21672
>      >      u1957888
>      >      > pcpu-alloc: s1928024 r8192 d21672 u1957888 alloc=478*4096
>      >      > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06
>      [0] 07
>      >      > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
>      >      > Xen: using vcpu_info placement
>      >      > Built 1 zonelists in Node order, mobility grouping on.  Total
>      pages:
>      >      409291
>      >      > Policy zone: DMA32
>      >      > Kernel command line: ro root=/dev/VolGroup01/LogVol00
>      console=hvc0
>      >      earlyprintk=xen nomodeset
>      >      > PID hash table entries: 4096 (order: 3, 32768 bytes)
>      >      > Initializing CPU#0
>      >      > DMA: Placing 64MB software IO TLB between ffff880007525000 -
>      >      ffff88000b525000
>      >      > DMA: software IO TLB at phys 0x7525000 - 0xb525000
>      >      > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864
>      >      > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768
>      >      > Memory: 1514268k/1683496k available (4654k kernel code, 396k
>      absent,
>      >      168832k reserved, 3443k data, 3396k init)
>      >      > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
>      CPUs=12,
>      >      Nodes=1
>      >      > Hierarchical RCU implementation.
>      >      > NR_IRQS:4352 nr_irqs:3072
>      >      > Already setup the GSI :0
>      >      > Already setup the GSI :1
>      >      > Already setup the GSI :2
>      >      > Already setup the GSI :3
>      >      > Already setup the GSI :4
>      >      > Already setup the GSI :5
>      >      > Already setup the GSI :6
>      >      > Already setup the GSI :7
>      >      > Already setup the GSI :8
>      >      > Already setup the GSI :9
>      >      > Already setup the GSI :10
>      >      > Already setup the GSI :11
>      >      > Already setup the GSI :12
>      >      > Already setup the GSI :13
>      >      > Already setup the GSI :14
>      >      > Already setup the GSI :15
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>      >      > xen: sci override: source_irq=9 global_irq=9 trigger=c
>      polarity=1
>      >      > xen_allocate_pirq: returning irq 9 for gsi 9
>      >      > Already setup the GSI :9
>      >      > xen: acpi sci 9
>      >      > Console: colour VGA+ 80x25
>      >      > console [hvc0] enabled, bootconsole disabled console [hvc0]
>      enabled,
>      >      bootconsole disabled
>      >      > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
>      Ingo
>      >      Molnar ... MAX_LOCKDEP_SUBCLASSES:  8 ... MAX_LOCK_DEPTH:
>       48
>      >      ... MAX_LOCKDEP_KEYS:        8191 ... CLASSHASH_SIZE:
>       4096 ...
>      >      MAX_LOCKDEP_ENTRIES:     16384 ... MAX_LOCKDEP_CHAINS:      32768
>      ...
>      >      CHAINHASH_SIZE:          16384  memory used by lock dependency
>      info:
>      >      6367 kB  per task-struct memory footprint: 2688 bytes allocated
>      17039360
>      >      bytes of page_cgroup please try 'cgroup_disable=memory' option if
>      you
>      >      don't want memory cgroups installing Xen timer for CPU 0 Detected
>      >      3200.206 MHz processor. Calibrating delay loop (skipped), value
>      >      calculated using timer frequency.. 6400.41 BogoMIPS (lpj=3200206)
>      >      Security Framework initialized SELinux:  Initializing. Dentry
>      cache hash
>      >      table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash
>      table
>      >      entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table
>      >      entries: 256 Initializing cgroup subsys ns Initializing cgroup
>      subsys
>      >      cpuacct Initializing cgroup subsys memory Initializing cgroup
>      subsys
>      >      devices Initializing cgroup subsys freezer Initializing cgroup
>      subsys
>      >      net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K
>      CPU:
>      >      L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported number of
>      siblings
>      >      32 Performance Events: unsupported p6 CPU model 44 no PMU driver,
>      >      software events only. lockdep: fixing up alternatives. SMP
>      alternatives:
>      >      switching to UP code ACPI: Core revision 20090903 ftrace:
>      converting
>      >      mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 entries
>      in 110
>      >      pages installing Xen timer for CPU 1 lockdep: fixing up
>      alternatives.
>      >      SMP alternatives: switching to SMP code Initializing CPU#1 CPU:
>      L1 I
>      >      cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache:
>      12288K
>      >      CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>      installing
>      >      Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D
>      cache:
>      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> Node 0
>      CPU:
>      >      Unsupported number of siblings 32 installing Xen timer for CPU 3
>      >      Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2
>      cache:
>      >      256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: Unsupported
>      number
>      >      of siblings 32 installing Xen timer for CPU 4 Initializing CPU#4
>      CPU: L1
>      >      I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache:
>      12288K
>      >      CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>      installing
>      >      Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D
>      cache:
>      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> Node 0
>      CPU:
>      >      Unsupported number of siblings 32 installing Xen timer for CPU 6
>      >      Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2
>      cache:
>      >      256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: Unsupported
>      number
>      >      of siblings 32 installing Xen timer for CPU 7 Initializing CPU#7
>      CPU: L1
>      >      I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache:
>      12288K
>      >      CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32
>      installing
>      >      Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: 32K, L1 D
>      cache:
>      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> Node 0
>      CPU:
>      >      Unsupported number of siblings 32 installing Xen timer for CPU 9
>      >      Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2
>      cache:
>      >      256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: Unsupported
>      number
>      >      of siblings 32 installing Xen timer for CPU 10 Initializing
>      CPU#10 CPU:
>      >      L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
>      cache:
>      >      12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of siblings
>      32
>      >      installing Xen timer for CPU 11 Initializing CPU#11 CPU: L1 I
>      cache:
>      >      32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K
>      CPU
>      >      11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 Brought
>      up 12
>      >      CPUs Grant table initialized regulator: core version 0.5 Time:
>      14:45:00
>      >       Date: 03/16/10 NET: Registered protocol family 16
>      xenbus_probe_init ok
>      >      ACPI FADT declares the system doesn't support PCIe ASPM, so
>      disable it
>      >      ACPI: bus type pci registered PCI: MCFG configuration 0: base
>      a0000000
>      >      segment 0 buses 0 - 255 PCI: MCFG area at a0000000 reserved in
>      E820 PCI:
>      >      Using MMCONFIG at a0000000 - afffffff PCI: Using configuration
>      type 1
>      >      for base access bio: create slab <bio-0> at 0 ACPI Error: Field
>      [CPB3]
>      >      at 96 exceeds Buffer [NULL] size 64 (bits)
>      (20090903/dsopcode-596) ACPI
>      >      Error (psparse-0537): Method parse/execution failed [\_SB_._OSC]
>      (Node
>      >      ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled
>      ACPI:
>      >      (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt
>      routing ACPI
>      >      Warning: Incorrect checksum in table [    ] - 97, should be DB
>      >      (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI
>      Root
>      >      Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0
>      D3hot
>      >      D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME#
>      supported
>      >      from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci
>      0000:00:03.0:
>      >      PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME#
>      disabled pci
>      >      0000:00:04.0: PME# supported from D0 D3hot D3cold pci
>      0000:00:04.0: PME#
>      >      disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0:
>      PME#
>      >      supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled
>      pci
>      >      0000:00:08.0: PME# supported from D0 D3hot D3cold pci
>      0000:00:08.0: PME#
>      >      disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:13.0:
>      PME#
>      >      supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled
>      pci
>      >      0000:00:1a.7: PME# supported from D0 D3hot D3cold pci
>      0000:00:1a.7: PME#
>      >      disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5:
>      PME#
>      >      supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled
>      pci
>      >      0000:00:1d.7: PME# supported from D0 D3hot D3cold pci
>      0000:00:1d.7: PME#
>      >      disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by
>      ICH6
>      >      ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed
>      by ICH6
>      >      GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680
>      (mask
>      >      000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0
>      (mask
>      >      000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600
>      (mask
>      >      001f) pci 0000:00:1f.2: PME# supported from D3hot pci
>      0000:00:1f.2: PME#
>      >      disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# supported from
>      D0
>      >      D3hot D3cold pci 0000:01:00.1: PME# disabled pci 0000:0c:00.0:
>      disabling
>      >      ASPM on pre-1.1 PCIe device.  You can enable it with
>      'pcie_aspm=force'
>      >      pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge [PCI1]
>      >      (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI
>      Interrupt
>      >      Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI
>      Interrupt Link
>      >      [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt
>      Link
>      >      [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt
>      Link
>      >      [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt
>      Link
>      >      [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI
>      >      Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI:
>      PCI
>      >      Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>      disabled.
>      >      ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14
>      15)
>      >      xenbus_probe_backend_init bus registered ok
>      xenbus_probe_frontend_init
>      >      bus registered ok xen_balloon: Initialising balloon driver with
>      page
>      >      order 0. vgaarb: device added:
>      >      PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb:
>      loaded
>      >      SCSI subsystem initialized usbcore: registered new interface
>      driver
>      >      usbfs usbcore: registered new interface driver hub usbcore:
>      registered
>      >      new device driver usb PCI: Using ACPI for IRQ routing NetLabel:
>      >      Initializing NetLabel:  domain hash size = 128 NetLabel:
>       protocols =
>      >      UNLABELED CIPSOv4 NetLabel:  unlabeled traffic allowed by default
>      >      Switching to clocksource xen kstop/0 used greatest stack depth:
>      6568
>      >      bytes left kstop/1 used greatest stack depth: 6536 bytes left
>      pnp: PnP
>      >      ACPI init ACPI: bus type pnp registered xen_allocate_pirq:
>      returning irq
>      >      8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning
>      irq 13
>      >      for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found 13
>      devices
>      >      ACPI: ACPI bus type pnp unregistered system 00:07: ioport range
>      >      0x500-0x53f has been reserved system 00:07: ioport range
>      0x400-0x47f has
>      >      been reserved system 00:07: ioport range 0x800-0x81f has been
>      reserved
>      >      system 00:07: ioport range 0x2f8-0x2ff has been reserved system
>      00:07:
>      >      iomem range 0xfed1c000-0xfed8bffe could not be reserved system
>      00:07:
>      >      iomem range 0xff000000-0xffffffff could not be reserved system
>      00:07:
>      >      iomem range 0xfee00000-0xfeefffff has been reserved system 00:07:
>      iomem
>      >      range 0xfe900000-0xfe90001f has been reserved system 00:07: iomem
>      range
>      >      0xfea00000-0xfea0001f has been reserved system 00:07: iomem range
>      >      0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: BAR 6:
>      no
>      >      parent found for of device [0xffff0000-0xffffffff] pci
>      0000:00:01.0: PCI
>      >      bridge, secondary bus 0000:01 pci 0000:00:01.0:   IO window:
>      >      0x1000-0x1fff pci 0000:00:01.0:   MEM window:
>      0xb1900000-0xb19fffff pci
>      >      0000:00:01.0:   PREFETCH window: disabled pci 0000:00:02.0: PCI
>      bridge,
>      >      secondary bus 0000:02 pci 0000:00:02.0:   IO window: disabled pci
>      >      0000:00:02.0:   MEM window: disabled pci 0000:00:02.0:   PREFETCH
>      >      window: disabled pci 0000:00:03.0: PCI bridge, secondary bus
>      0000:03 pci
>      >      0000:00:03.0:   IO window: disabled pci 0000:00:03.0:   MEM
>      window:
>      >      disabled pci 0000:00:03.0:   PREFETCH window: disabled pci
>      0000:00:04.0:
>      >      PCI bridge, secondary bus 0000:04 pci 0000:00:04.0:   IO window:
>      >      disabled pci 0000:00:04.0:   MEM window: disabled pci
>      0000:00:04.0:
>      >      PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary
>      bus
>      >      0000:05 pci 0000:00:05.0:   IO window: disabled pci 0000:00:05.0:
>        MEM
>      >      window: disabled pci 0000:00:05.0:   PREFETCH window: disabled
>      pci
>      >      0000:00:06.0: PCI bridge, secondary bus 0000:06 pci 0000:00:06.0:
>        IO
>      >      window: disabled pci 0000:00:06.0:   MEM window: disabled pci
>      >      0000:00:06.0:   PREFETCH window: disabled pci 0000:00:07.0: PCI
>      bridge,
>      >      secondary bus 0000:07 pci 0000:00:07.0:   IO window: disabled pci
>      >      0000:00:07.0:   MEM window: disabled pci 0000:00:07.0:   PREFETCH
>      >      window: disabled pci 0000:00:08.0: PCI bridge, secondary bus
>      0000:08 pci
>      >      0000:00:08.0:   IO window: disabled pci 0000:00:08.0:   MEM
>      window:
>      >      disabled pci 0000:00:08.0:   PREFETCH window: disabled pci
>      0000:00:09.0:
>      >      PCI bridge, secondary bus 0000:09 pci 0000:00:09.0:   IO window:
>      >      0x3000-0x3fff pci 0000:00:09.0:   MEM window:
>      0xb1b00000-0xb1cfffff pci
>      >      0000:00:09.0:   PREFETCH window:
>      0x000000b1d00000-0x000000b1efffff pci
>      >      0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci 0000:00:0a.0:
>        IO
>      >      window: disabled pci 0000:00:0a.0:   MEM window: disabled pci
>      >      0000:00:0a.0:   PREFETCH window: disabled pci 0000:00:1c.0: PCI
>      bridge,
>      >      secondary bus 0000:0b pci 0000:00:1c.0:   IO window: disabled pci
>      >      0000:00:1c.0:   MEM window: disabled pci 0000:00:1c.0:   PREFETCH
>      >      window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus
>      0000:0c pci
>      >      0000:00:1c.4:   IO window: disabled pci 0000:00:1c.4:   MEM
>      window:
>      >      0xb1000000-0xb18fffff pci 0000:00:1c.4:   PREFETCH window:
>      >      0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI bridge,
>      >      secondary bus 0000:0d pci 0000:00:1c.5:   IO window: disabled pci
>      >      0000:00:1c.5:   MEM window: disabled pci 0000:00:1c.5:   PREFETCH
>      >      window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus
>      0000:0e pci
>      >      0000:00:1e.0:   IO window: disabled pci 0000:00:1e.0:   MEM
>      window:
>      >      disabled pci 0000:00:1e.0:   PREFETCH window: disabled pci
>      0000:00:01.0:
>      >      PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:02.0: PCI
>      INT A
>      >      -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT A ->
>      GSI 24
>      >      (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI 25
>      (level,
>      >      low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low)
>      -> IRQ
>      >      26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
>      pci
>      >      0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci
>      >      0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci
>      >      0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci
>      >      0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci
>      >      0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>      >      xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the
>      GSI :16
>      >      pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci
>      >      0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET:
>      Registered
>      >      protocol family 2 IP route cache hash table entries: 65536
>      (order: 7,
>      >      524288 bytes) TCP established hash table entries: 262144 (order:
>      10,
>      >      4194304 bytes) TCP bind hash table entries: 65536 (order: 10,
>      4718592
>      >      bytes) TCP: Hash tables configured (established 262144 bind
>      65536) TCP
>      >      reno registered NET: Registered protocol family 1 pci
>      0000:01:00.0:
>      >      Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to unpack
>      rootfs
>      >      image as initramfs... Freeing initrd memory: 6474k freed DMA-API:
>      >      preallocated 32768 debug entries DMA-API: debugging enabled by
>      kernel
>      >      config PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>      DMA:
>      >      Placing 64MB software IO TLB between ffff880007525000 -
>      ffff88000b525000
>      >      DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit:
>      initializing
>      >      netlink socket (disabled) type=2000 audit(1268750702.035:1):
>      initialized
>      >      HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS:
>      Disk
>      >      quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0,
>      4096
>      >      bytes) msgmni has been set to 2970 cryptomgr_test used greatest
>      stack
>      >      depth: 5864 bytes left cryptomgr_test used greatest stack depth:
>      5816
>      >      bytes left alg: No test for stdrng (krng) Block layer SCSI
>      generic (bsg)
>      >      driver version 0.4 loaded (major 252) io scheduler noop
>      registered io
>      >      scheduler anticipatory registered io scheduler deadline
>      registered io
>      >      scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI
>      Core
>      >      version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id 8086
>      device_id
>      >      3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug Controller
>      Driver
>      >      version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver
>      version: 0.5
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      acpiphp_glue: Slot 2 already registered by another hotplug driver
>      >      pci-stub: invalid id string "" input: Sleep Button as
>      >      /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI:
>      Sleep
>      >      Button [SLPB] input: Power Button as
>      >      /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button
>      [PWRF]
>      >      registering netback hpet_acpi_add: no address or irqs in _CRS
>      >      Non-volatile memory driver v1.3 Linux agpgart interface v0.103
>      Serial:
>      >      8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1
>      at I/O
>      >      0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module
>      loaded
>      >      input: Macintosh mouse button emulation as
>      /devices/virtual/input/input2
>      >      ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>      ahci
>      >      0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl
>      SATA mode
>      >      ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
>      ccc
>      >      ems  scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 :
>      ahci
>      >      scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040,
>      connection
>      >      status changed irq 2996 ata2: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar
>      m2048@0xb1a00000
>      >      port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: USB 2.0
>      >      'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7:
>      PCI INT
>      >      C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI
>      Host
>      >      Controller ehci_hcd 0000:00:1a.7: new USB bus registered,
>      assigned bus
>      >      number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd
>      0000:00:1a.7: irq
>      >      18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 started,
>      EHCI 1.00
>      >      usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb
>      usb1:
>      >      New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb
>      usb1:
>      >      Product: EHCI Host Controller usb usb1: Manufacturer: Linux
>      2.6.32.9
>      >      ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1:
>      configuration #1
>      >      chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6
>      ports
>      >      detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
>      -> IRQ
>      >      23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd
>      0000:00:1d.7:
>      >      new USB bus registered, assigned bus number 2 ehci_hcd
>      0000:00:1d.7:
>      >      debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000
>      ehci_hcd
>      >      0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device
>      found,
>      >      idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings:
>      Mfr=3,
>      >      Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller
>      usb
>      >      usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2:
>      SerialNumber:
>      >      0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub
>      >      2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd:
>      USB 1.1
>      >      'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host
>      >      Controller Interface driver xen_allocate_pirq: returning irq 16
>      for gsi
>      >      16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A ->
>      GSI 16
>      >      (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host
>      Controller
>      >      uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
>      number 3
>      >      uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb usb3: New
>      USB
>      >      device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB
>      device
>      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI
>      Host
>      >      Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd usb
>      usb3:
>      >      SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from
>      1
>      >      choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected
>      uhci_hcd
>      >      0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd
>      >      0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB
>      bus
>      >      registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21,
>      io base
>      >      0x000020c0 usb usb4: New USB device found, idVendor=1d6b,
>      idProduct=0001
>      >      usb usb4: New USB device strings: Mfr=3, Product=2,
>      SerialNumber=1 usb
>      >      usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux
>      >      2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4:
>      >      configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found
>      hub
>      >      4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 19 for
>      gsi 19
>      >      Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI
>      19
>      >      (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host
>      Controller
>      >      uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
>      number 5
>      >      uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb usb5: New
>      USB
>      >      device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB
>      device
>      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI
>      Host
>      >      Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd usb
>      usb5:
>      >      SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from
>      1
>      >      choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected
>      >      xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the
>      GSI :23
>      >      uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>      >      uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd
>      0000:00:1d.0: new
>      >      USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0:
>      irq 23,
>      >      io base 0x00002080 usb usb6: New USB device found, idVendor=1d6b,
>      >      idProduct=0001 usb usb6: New USB device strings: Mfr=3,
>      Product=2,
>      >      SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6:
>      >      Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: SerialNumber:
>      >      0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub
>      >      6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected
>      xen_allocate_pirq:
>      >      returning irq 19 for gsi 19 Already setup the GSI :19 uhci_hcd
>      >      0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd
>      >      0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB
>      bus
>      >      registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19,
>      io base
>      >      0x00002060 usb usb7: New USB device found, idVendor=1d6b,
>      idProduct=0001
>      >      usb usb7: New USB device strings: Mfr=3, Product=2,
>      SerialNumber=1 usb
>      >      usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux
>      >      2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7:
>      >      configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found
>      hub
>      >      7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for
>      gsi 18
>      >      Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI
>      18
>      >      (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host
>      Controller
>      >      uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
>      number 8
>      >      uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: New
>      USB
>      >      device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB
>      device
>      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI
>      Host
>      >      Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd usb
>      usb8:
>      >      SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from
>      1
>      >      choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected
>      PNP: No
>      >      PS/2 controller found. Probing ports directly. i8042.c: No
>      controller
>      >      found. mice: PS/2 mouse device common for all mice rtc_cmos
>      00:03: RTC
>      >      can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as
>      rtc0
>      >      rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper:
>      >      uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl
>      (2009-04-01)
>      >      initialised: [16][17]dm-devel@xxxxxxxxxx cpuidle: using governor
>      ladder
>      >      cpuidle: using governor menu usbcore: registered new interface
>      driver
>      >      hiddev usbcore: registered new interface driver usbhid usbhid:
>      v2.6:USB
>      >      HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536
>      max)
>      >      CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
>      use
>      >      nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
>      option
>      >      or sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>      ip_tables: (C)
>      >      2000-2006 Netfilter Core Team TCP cubic registered Initializing
>      XFRM
>      >      netlink socket NET: Registered protocol family 17 registered
>      taskstats
>      >      version 1 No TPM chip found, activating TPM-bypass!   Magic
>      number:
>      >      2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: setting
>      system
>      >      clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing network
>      drop
>      >      monitor service ata2: SATA link down (SStatus 0 SControl 300)
>      ata4: SATA
>      >      link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus
>      0
>      >      SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3:
>      SATA
>      >      link down (SStatus 0 SControl 300) usb 7-1: new low speed USB
>      device
>      >      using uhci_hcd and address 2
>      >       ====================================================== [ INFO:
>      >      SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.32.9 #1
>      >      ------------------------------------------------------ khubd/100
>      >      [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
>       (&retval->lock){......},
>      >      at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8  and this task
>      is
>      >      already holding:  (&uhci->lock){..-...}, at: [<ffffffff8137aedd>]
>      >      uhci_urb_enqueue+0x46/0x7e3 which would create a new lock
>      dependency:
>      >       (&uhci->lock){..-...} -> (&retval->lock){......}  but this new
>      >      dependency connects a SOFTIRQ-irq-safe lock:
>       (&uhci->lock){..-...} ...
>      >      which became SOFTIRQ-irq-safe at:   [<ffffffff8108ea6d>]
>      >      __lock_acquire+0x2d2/0xc07   [<ffffffff8108f46f>]
>      lock_acquire+0xcd/0xf2
>      >        [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86
>      >      [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c
>      >      [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a
>      >      [<ffffffff8135a479>] rh_timer_func+0xe/0x10
>      [<ffffffff810693bd>]
>      >      run_timer_softirq+0x1a6/0x257   [<ffffffff810627e4>]
>      >      __do_softirq+0xe6/0x1bc   [<ffffffff81013fac>]
>      call_softirq+0x1c/0x30
>      >      [<ffffffff81015794>] do_softirq+0x4b/0xa7   [<ffffffff81062229>]
>      >      irq_exit+0x4a/0x89   [<ffffffff812bf9d9>]
>      >      xen_evtchn_do_upcall+0x156/0x172   [<ffffffff81013ffe>]
>      >      xen_do_hypervisor_callback+0x1e/0x30  to a SOFTIRQ-irq-unsafe
>      lock:
>      >       (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ...
>      >       [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07
>      [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2   [<ffffffff814853bc>]
>      _spin_lock+0x36/0x6b
>      >      [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a
>      >      [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>      [<ffffffff8100e58c>]
>      >      xen_alloc_ptpage+0x51/0x82   [<ffffffff8100e5d0>]
>      >      xen_alloc_pud+0x13/0x15   [<ffffffff810fe3cf>]
>      __pud_alloc+0x79/0xb3
>      >      [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>      >      [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>      [<ffffffff8110c197>]
>      >      map_vm_area+0x34/0x47   [<ffffffff8110c2cf>]
>      >      __vmalloc_area_node+0x125/0x14d   [<ffffffff8110c379>]
>      >      __vmalloc_node+0x82/0x91   [<ffffffff8110c4e9>]
>      __vmalloc+0x20/0x22
>      >      [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe
>      >      [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>      [<ffffffff819c1d99>]
>      >      start_kernel+0x3de/0x426   [<ffffffff819c12c3>]
>      >      x86_64_start_reservations+0xae/0xb2   [<ffffffff819c4d5d>]
>      >      xen_start_kernel+0x4b9/0x4c0  other info that might help us debug
>      this:
>      >       2 locks held by khubd/100:  #0:  (usb_address0_mutex){+.+...},
>      at:
>      >      [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4  #1:
>      >       (&uhci->lock){..-...}, at: [<ffffffff8137aedd>]
>      >      uhci_urb_enqueue+0x46/0x7e3  the dependencies between
>      SOFTIRQ-irq-safe
>      >      lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 {
>      >       IN-SOFTIRQ-W at:                         [<ffffffff8108ea6d>]
>      >      __lock_acquire+0x2d2/0xc07
>      [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2
>      [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86
>      >      [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c
>      >          [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a
>      >                [<ffffffff8135a479>] rh_timer_func+0xe/0x10
>      >            [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257
>      >              [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc
>      >          [<ffffffff81013fac>] call_softirq+0x1c/0x30
>      >      [<ffffffff81015794>] do_softirq+0x4b/0xa7
>      >      [<ffffffff81062229>] irq_exit+0x4a/0x89
>      >      [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172
>      >            [<ffffffff81013ffe>] xen_do_hypervisor_callback+0x1e/0x30
>      >       INITIAL USE at:                        [<ffffffff8108eb29>]
>      >      __lock_acquire+0x38e/0xc07
>       [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2
>       [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86
>       [<ffffffff8137c3d7>]
>      >      uhci_hub_control+0x74/0x401
>       [<ffffffff8135bdac>]
>      >      usb_hcd_submit_urb+0x7a6/0xa1e
>      >       [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1
>      >       [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1
>      >         [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113
>      >       [<ffffffff81358922>] hub_probe+0x37c/0xfaa
>      >       [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7
>      >           [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>      >             [<ffffffff813077fa>] __device_attach+0x28/0x31
>      >           [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85
>      >         [<ffffffff81307891>] device_attach+0x65/0x7c
>      >       [<ffffffff8130667e>] bus_probe_device+0x27/0x3e
>      >       [<ffffffff813045b3>] device_add+0x3ab/0x57d
>      >       [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677
>      >             [<ffffffff81367b85>] generic_probe+0x67/0xae
>      >         [<ffffffff813607b1>] usb_probe_device+0x7f/0x87
>      >       [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>      >         [<ffffffff813077fa>] __device_attach+0x28/0x31
>      >       [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85
>      >       [<ffffffff81307891>] device_attach+0x65/0x7c
>      >       [<ffffffff8130667e>] bus_probe_device+0x27/0x3e
>      >       [<ffffffff813045b3>] device_add+0x3ab/0x57d
>      >       [<ffffffff8135616e>] usb_new_device+0x154/0x201
>      >       [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d
>      >       [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1
>      >         [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b
>      >       [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7
>      >       [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>      >         [<ffffffff813077ae>] __driver_attach+0x59/0x7d
>      >       [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83
>      >       [<ffffffff813073fd>] driver_attach+0x21/0x23
>      >       [<ffffffff81306487>] bus_add_driver+0xe1/0x26b
>      >       [<ffffffff81307ad5>] driver_register+0xa3/0x11a
>      >       [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2
>      >           [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1
>      >       [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>      >       [<ffffffff819c1961>] kernel_init+0x172/0x1cc
>      >       [<ffffffff81013eaa>] child_rip+0xa/0x20  }  ... key      at:
>      >      [<ffffffff8268de38>] __key.33456+0x0/0x8  ... acquired at:
>      >       [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5
>       [<ffffffff8108f128>]
>      >      __lock_acquire+0x98d/0xc07    [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2    [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86    [<ffffffff8111178c>]
>      >      dma_pool_alloc+0x36/0x2a8    [<ffffffff8137aa7b>]
>      >      uhci_alloc_qh+0x33/0x146    [<ffffffff8137af66>]
>      >      uhci_urb_enqueue+0xcf/0x7e3    [<ffffffff8135be92>]
>      >      usb_hcd_submit_urb+0x88c/0xa1e    [<ffffffff8135c6b2>]
>      >      usb_submit_urb+0x297/0x2f1    [<ffffffff8135d51f>]
>      >      usb_start_wait_urb+0x54/0x1b1    [<ffffffff8135d8a1>]
>      >      usb_control_msg+0xee/0x113    [<ffffffff813551fb>]
>      >      hub_port_init+0x31d/0x7e4    [<ffffffff81356d68>]
>      >      hub_events+0x91e/0x11a2    [<ffffffff81358432>]
>      hub_thread+0x25/0x199
>      >       [<ffffffff8107b8fd>] kthread+0x6e/0x76    [<ffffffff81013eaa>]
>      >      child_rip+0xa/0x20   the dependencies between the lock to be
>      acquired
>      >      and SOFTIRQ-irq-unsafe lock:  -> (purge_lock){+.+...} ops: 0 {
>      >      HARDIRQ-ON-W at:                           [<ffffffff8108eaba>]
>      >      __lock_acquire+0x31f/0xc07
>      >      [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2
>      >      [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>      >      [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a
>      >              [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>      >                  [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82
>      >                    [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15
>      >                  [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>      >              [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>      >                        [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>      >                        [<ffffffff8110c197>] map_vm_area+0x34/0x47
>      >                    [<ffffffff8110c2cf>]
>      __vmalloc_area_node+0x125/0x14d
>      >                          [<ffffffff8110c379>] __vmalloc_node+0x82/0x91
>      >                          [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>      >                    [<ffffffff819dfef1>]
>      alloc_large_system_hash+0x150/0x1fe
>      >                              [<ffffffff819e28c5>]
>      vfs_caches_init+0xa9/0x11d
>      >                                [<ffffffff819c1d99>]
>      start_kernel+0x3de/0x426
>      >                                [<ffffffff819c12c3>]
>      >      x86_64_start_reservations+0xae/0xb2
>      >      [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0
>      SOFTIRQ-ON-W at:
>      >                              [<ffffffff8108eadc>]
>      __lock_acquire+0x341/0xc07
>      >                                [<ffffffff8108f46f>]
>      lock_acquire+0xcd/0xf2
>      >                              [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>      >                          [<ffffffff8110aa20>]
>      >      __purge_vmap_area_lazy+0x54/0x18a
>      >      [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176
>      >          [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82
>      >            [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15
>      >          [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>      >      [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264
>      >                [<ffffffff8110c161>] vmap_page_range+0xe/0x10
>      >                [<ffffffff8110c197>] map_vm_area+0x34/0x47
>      >            [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d
>      >                  [<ffffffff8110c379>] __vmalloc_node+0x82/0x91
>      >                  [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>      >            [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe
>      >                      [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>      >                        [<ffffffff819c1d99>] start_kernel+0x3de/0x426
>      >                        [<ffffffff819c12c3>]
>      >      x86_64_start_reservations+0xae/0xb2
>      >      [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0     INITIAL USE
>      at:
>      >                             [<ffffffff8108eb29>]
>      __lock_acquire+0x38e/0xc07
>      >                             [<ffffffff8108f46f>]
>      lock_acquire+0xcd/0xf2
>      >                         [<ffffffff814853bc>] _spin_lock+0x36/0x6b
>      >                   [<ffffffff8110aa20>]
>      __purge_vmap_area_lazy+0x54/0x18a
>      >                           [<ffffffff8110c82f>]
>      vm_unmap_aliases+0x167/0x176
>      >                             [<ffffffff8100e58c>]
>      xen_alloc_ptpage+0x51/0x82
>      >                             [<ffffffff8100e5d0>]
>      xen_alloc_pud+0x13/0x15
>      >                           [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3
>      >                       [<ffffffff8110bf76>]
>      vmap_page_range_noflush+0x9a/0x264
>      >                               [<ffffffff8110c161>]
>      vmap_page_range+0xe/0x10
>      >                             [<ffffffff8110c197>] map_vm_area+0x34/0x47
>      >                         [<ffffffff8110c2cf>]
>      __vmalloc_area_node+0x125/0x14d
>      >                               [<ffffffff8110c379>]
>      __vmalloc_node+0x82/0x91
>      >                             [<ffffffff8110c4e9>] __vmalloc+0x20/0x22
>      >                       [<ffffffff819dfef1>]
>      >      alloc_large_system_hash+0x150/0x1fe
>      >       [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d
>      >       [<ffffffff819c1d99>] start_kernel+0x3de/0x426
>      >       [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2
>      >                 [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0   }
>        ...
>      >      key      at: [<ffffffff81741ef8>] purge_lock.27226+0x18/0x40
>      ...
>      >      acquired at:    [<ffffffff8108f20c>] __lock_acquire+0xa71/0xc07
>      >       [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2
>       [<ffffffff814853bc>]
>      >      _spin_lock+0x36/0x6b    [<ffffffff8110aa20>]
>      >      __purge_vmap_area_lazy+0x54/0x18a    [<ffffffff8110c82f>]
>      >      vm_unmap_aliases+0x167/0x176    [<ffffffff8100d7ca>]
>      >      xen_create_contiguous_region+0x51/0x106    [<ffffffff81250d84>]
>      >      xen_swiotlb_alloc_coherent+0x62/0xa6    [<ffffffff8111188c>]
>      >      dma_pool_alloc+0x136/0x2a8    [<ffffffff81370efe>]
>      >      ehci_qh_alloc+0x44/0x107    [<ffffffff81373f5d>]
>      >      ehci_pci_setup+0x22a/0x9c1    [<ffffffff8135b18e>]
>      >      usb_add_hcd+0x225/0x69d    [<ffffffff8136907b>]
>      >      usb_hcd_pci_probe+0x270/0x3b1    [<ffffffff8125a8ad>]
>      >      local_pci_probe+0x17/0x1b    [<ffffffff8125b4c4>]
>      >      pci_device_probe+0xcb/0xf7    [<ffffffff81307635>]
>      >      driver_probe_device+0xf8/0x218    [<ffffffff813077ae>]
>      >      __driver_attach+0x59/0x7d    [<ffffffff813069e1>]
>      >      bus_for_each_dev+0x54/0x83    [<ffffffff813073fd>]
>      >      driver_attach+0x21/0x23    [<ffffffff81306487>]
>      >      bus_add_driver+0xe1/0x26b    [<ffffffff81307ad5>]
>      >      driver_register+0xa3/0x11a    [<ffffffff8125b71b>]
>      >      __pci_register_driver+0x65/0xc2    [<ffffffff819f3ee0>]
>      >      ehci_hcd_init+0x7f/0xc0    [<ffffffff8100a07e>]
>      >      do_one_initcall+0x73/0x18b    [<ffffffff819c1961>]
>      >      kernel_init+0x172/0x1cc    [<ffffffff81013eaa>]
>      child_rip+0xa/0x20  ->
>      >      (&retval->lock){......} ops: 0 {    INITIAL USE at:
>      >         [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07
>      >       [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2
>      >       [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86
>      >       [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8
>      >       [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107
>      >       [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1
>      >       [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d
>      >       [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1
>      >         [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b
>      >       [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7
>      >       [<ffffffff81307635>] driver_probe_device+0xf8/0x218
>      >         [<ffffffff813077ae>] __driver_attach+0x59/0x7d
>      >       [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83
>      >       [<ffffffff813073fd>] driver_attach+0x21/0x23
>      >       [<ffffffff81306487>] bus_add_driver+0xe1/0x26b
>      >       [<ffffffff81307ad5>] driver_register+0xa3/0x11a
>      >       [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2
>      >           [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0
>      >       [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>      >       [<ffffffff819c1961>] kernel_init+0x172/0x1cc
>      >       [<ffffffff81013eaa>] child_rip+0xa/0x20  }  ... key      at:
>      >      [<ffffffff824dc3c4>] __key.24188+0x0/0x1c  ... acquired at:
>      >       [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5
>       [<ffffffff8108f128>]
>      >      __lock_acquire+0x98d/0xc07    [<ffffffff8108f46f>]
>      >      lock_acquire+0xcd/0xf2    [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86    [<ffffffff8111178c>]
>      >      dma_pool_alloc+0x36/0x2a8    [<ffffffff8137aa7b>]
>      >      uhci_alloc_qh+0x33/0x146    [<ffffffff8137af66>]
>      >      uhci_urb_enqueue+0xcf/0x7e3    [<ffffffff8135be92>]
>      >      usb_hcd_submit_urb+0x88c/0xa1e    [<ffffffff8135c6b2>]
>      >      usb_submit_urb+0x297/0x2f1    [<ffffffff8135d51f>]
>      >      usb_start_wait_urb+0x54/0x1b1    [<ffffffff8135d8a1>]
>      >      usb_control_msg+0xee/0x113    [<ffffffff813551fb>]
>      >      hub_port_init+0x31d/0x7e4    [<ffffffff81356d68>]
>      >      hub_events+0x91e/0x11a2    [<ffffffff81358432>]
>      hub_thread+0x25/0x199
>      >       [<ffffffff8107b8fd>] kthread+0x6e/0x76    [<ffffffff81013eaa>]
>      >      child_rip+0xa/0x20   stack backtrace: Pid: 100, comm: khubd Not
>      tainted
>      >      2.6.32.9 #1 Call Trace:  [<ffffffff8108cd50>]
>      check_usage+0x331/0x345
>      >       [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80
>      >       [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5
>       [<ffffffff8108f128>]
>      >      __lock_acquire+0x98d/0xc07  [<ffffffff8111008c>] ?
>      >      sys_swapoff+0x870/0x9d0  [<ffffffff8108f46f>]
>      lock_acquire+0xcd/0xf2
>      >       [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8
>       [<ffffffff81485526>]
>      >      _spin_lock_irqsave+0x4f/0x86  [<ffffffff8111178c>] ?
>      >      dma_pool_alloc+0x36/0x2a8  [<ffffffff8111178c>]
>      >      dma_pool_alloc+0x36/0x2a8  [<ffffffff8111a986>] ?
>      init_object+0x73/0x7b
>      >       [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
>      >       [<ffffffff8100f452>] ? check_events+0x12/0x20
>       [<ffffffff8137aa7b>]
>      >      uhci_alloc_qh+0x33/0x146  [<ffffffff8111dda9>] ?
>      >      kmem_cache_alloc+0xd9/0x150  [<ffffffff8137af66>]
>      >      uhci_urb_enqueue+0xcf/0x7e3  [<ffffffff8135a29c>] ?
>      >      dma_map_single_attrs+0xb4/0xc6  [<ffffffff8135be92>]
>      >      usb_hcd_submit_urb+0x88c/0xa1e  [<ffffffff8100ed81>] ?
>      >      xen_force_evtchn_callback+0xd/0xf  [<ffffffff8100ed81>] ?
>      >      xen_force_evtchn_callback+0xd/0xf  [<ffffffff8100f452>] ?
>      >      check_events+0x12/0x20  [<ffffffff8108b9ea>] ?
>      >      lockdep_init_map+0x9f/0x115  [<ffffffff8135c6b2>]
>      >      usb_submit_urb+0x297/0x2f1  [<ffffffff8107beb6>] ?
>      >      __init_waitqueue_head+0x3a/0x4c  [<ffffffff8135d51f>]
>      >      usb_start_wait_urb+0x54/0x1b1  [<ffffffff8100f452>] ?
>      >      check_events+0x12/0x20  [<ffffffff8135c939>] ?
>      usb_alloc_urb+0x21/0x4b
>      >       [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b
>       [<ffffffff8135d8a1>]
>      >      usb_control_msg+0xee/0x113  [<ffffffff8111c5ef>] ?
>      >      kmem_cache_alloc_notrace+0xe8/0x111  [<ffffffff8135517a>] ?
>      >      hub_port_init+0x29c/0x7e4  [<ffffffff813551fb>]
>      >      hub_port_init+0x31d/0x7e4  [<ffffffff81356d68>]
>      hub_events+0x91e/0x11a2
>      >       [<ffffffff8135840d>] ? hub_thread+0x0/0x199
>       [<ffffffff81358432>]
>      >      hub_thread+0x25/0x199  [<ffffffff8107bb4f>] ?
>      >      autoremove_wake_function+0x0/0x3d  [<ffffffff8107b8fd>]
>      >      kthread+0x6e/0x76  [<ffffffff81013eaa>] child_rip+0xa/0x20
>      >       [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
>      >       [<ffffffff81013810>] ? restore_args+0x0/0x30
>       [<ffffffff8107b9f2>] ?
>      >      kthreadd+0xed/0x10f  [<ffffffff81013ea0>] ? child_rip+0x0/0x20
>      ata1:
>      >      SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8:
>      Hitachi
>      >      HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168
>      sectors,
>      >      multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for
>      UDMA/133
>      >      scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72102 STBO
>      PQ: 0
>      >      ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
>      GB/232
>      >      GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0:
>      [sda]
>      >      Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd
>      >      0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>      >      support DPO or FUA  sda: sda1 sda2 sd 0:0:0:0: [sda] Attached
>      SCSI disk
>      >      Freeing unused kernel memory: 3396k freed Write protecting the
>      kernel
>      >      read-only data: 6988k Red Hat nash version 5.1.19.6 starting
>      Mounting
>      >      proc filesystem Mounting sysfs filesystem Creating /dev Creating
>      initial
>      >      device nodes Setting up hotplug. usb 7-1: New USB device found,
>      >      idVendor=0458, idProduct=0007 usb 7-1: New USB device strings:
>      Mfr=2,
>      >      Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse usb
>      7-1:
>      >      Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 choice
>      input:
>      >      KYE Optical Mouse as
>      >      /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3
>      >      generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.10
>      Mouse [KYE
>      >      Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block device
>      nodes.
>      >      Loading aacraid.ko module Adaptec aacraid driver 1.1-5[2461]-ms
>      Scanning
>      >      and configuring dmraid supported devices Scanning logical volumes
>      >      Reading all physical volumes.  This may take a while...
>      Activating
>      >      logical volumes   Volume group "VolGroup01" not found Trying to
>      resume
>      >      from /dev/VolGroup01/LogVol01 Unable to access resume device
>      >      (/dev/VolGroup01/LogVol01) Creating root device. Mounting root
>      >      filesystem. mount: could not find filesystem '/dev/root' Setting
>      up
>      >      other filesystems. Setting up new root fs setuproot: moving /dev
>      failed:
>      >      No such file or directory no fstab.sys, mounting internal
>      defaults
>      >      setuproot: error mounting /proc: No such file or directory
>      setuproot:
>      >      error mounting /sys: No such file or directory Switching to new
>      root and
>      >      running init. unmounting old /dev unmounting old /proc unmounting
>      old
>      >      /sys switchroot: mount failed: No such file or directory init
>      used
>      >      greatest stack depth: 4088 bytes left Kernel panic - not syncing:
>      >      Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32.9
>      #1 Call
>      >      Trace:  [<ffffffff8105b73f>] panic+0xa5/0x167
>       [<ffffffff8100ed81>] ?
>      >      xen_force_evtchn_callback+0xd/0xf  [<ffffffff8105f2ab>] ?
>      >      do_exit+0x38a/0x701  [<ffffffff8100f43f>] ?
>      >      xen_restore_fl_direct_end+0x0/0x1  [<ffffffff8108f81b>] ?
>      >      lock_release+0x179/0x184  [<ffffffff8108ca1d>] ?
>      >      trace_hardirqs_on+0xd/0xf  [<ffffffff81484fcf>] ?
>      >      _write_unlock_irq+0x37/0x3c  [<ffffffff8105ef9f>]
>      do_exit+0x7e/0x701
>      >       [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b
>       [<ffffffff8105f6d5>]
>      >      sys_exit_group+0x17/0x1b  [<ffffffff81012d72>]
>      >      system_call_fastpath+0x16/0x1b
>      >
>      > References
>      >
>      >    Visible links
>      >    1. mailto:[18]pasik@xxxxxx
>      >    2. mailto:[19]pasik@xxxxxx
>      >    3.
>      [20]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >    4.
>      [21]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >    5. mailto:[22]pasik@xxxxxx
>      >    6.
>      [23]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >    7.
>      [24]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >    8. mailto:[25]pasik@xxxxxx
>      >    9. mailto:[26]pasik@xxxxxx
>      >   10.
>      [27]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >   11.
>      [28]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >   12. mailto:[29]pasik@xxxxxx
>      >   13.
>      [30]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >   14.
>      [31]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >   15. mailto:[32]pasik@xxxxxx
>      >   16. mailto:[33]dm-devel@xxxxxxxxxx
>
> References
>
>    Visible links
>    1. mailto:pasik@xxxxxx
>    2. mailto:pasik@xxxxxx
>    3. mailto:pasik@xxxxxx
>    4. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>    5. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>    6. mailto:pasik@xxxxxx
>    7. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>    8. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>    9. mailto:pasik@xxxxxx
>   10. mailto:pasik@xxxxxx
>   11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   12. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   13. mailto:pasik@xxxxxx
>   14. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   15. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   16. mailto:pasik@xxxxxx
>   17. mailto:dm-devel@xxxxxxxxxx
>   18. mailto:pasik@xxxxxx
>   19. mailto:pasik@xxxxxx
>   20. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   21. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   22. mailto:pasik@xxxxxx
>   23. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   24. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   25. mailto:pasik@xxxxxx
>   26. mailto:pasik@xxxxxx
>   27. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   28. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   29. mailto:pasik@xxxxxx
>   30. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   31. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   32. mailto:pasik@xxxxxx
>   33. mailto:dm-devel@xxxxxxxxxx

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>