Hello Konrad,
I will give that a go ...
Friday, November 20, 2009, 3:50:20 PM, you wrote:
> On Fri, Nov 20, 2009 at 12:25:16PM +0100, Sander Eikelenboom wrote:
>> I occasionally have the same problem (same messages spit out by the kernel
>> on boot.
>> System keeps running, but everything is terribly slow it seems (these
>> messages appear one by one with sometimes several seconds in between)
>> In the end it can not mount the root filesystem and bails out.
> This is most curious. Based on your Xen hypervisor logs:
> ..snip..
>> (XEN) IRQ: 0, IRQ affinity:0xffffffff, Vec:240 type=IO-APIC-edge
>> status=
>> 00000000 mapped, unbound
>> (XEN) IRQ: 1, IRQ affinity:0x00000001, Vec: 40 type=IO-APIC-edge
>> status=
>> 00000006 mapped, unbound
>> (XEN) IRQ: 2, IRQ affinity:0xffffffff, Vec:226 type=XT-PIC
>> status=
>> 00000000 mapped, unbound
>> (XEN) IRQ: 3, IRQ affinity:0xffffffff, Vec:227 type=XT-PIC
>> status=
>> 00000002 mapped, unbound
>> (XEN) IRQ: 4, IRQ affinity:0xffffffff, Vec:241 type=IO-APIC-edge
>> status=
>> 00000000 mapped, unbound
>> (XEN) IRQ: 5, IRQ affinity:0xffffffff, Vec:229 type=XT-PIC
>> status=
>> 00000010 in-flight=0 domain-list=0: 5(----),
>> (XEN) IRQ: 6, IRQ affinity:0x00000001, Vec: 48 type=IO-APIC-edge
>> status=
>> 00000002 mapped, unbound
>> (XEN) IRQ: 7, IRQ affinity:0xffffffff, Vec:231 type=XT-PIC
>> status=
>> 00000010 in-flight=0 domain-list=0: 7(----),
>> (XEN) IRQ: 8, IRQ affinity:0x00000001, Vec: 56 type=IO-APIC-edge
>> status=
>> 00000002 mapped, unbound
> .. snip..
> That are not mapped to the Dom0. Meaning that well, ..., they are not being
> received by
> Dom0, which definilty is a problem.
> <side-track>
> Mr Goswin,
> Can you try getting the hypervisor output? That can be done by pressing
> Ctrl-A three
> times and one of the keys for the IRQ to domains mapping. I am just looking
> to see
> if you have the same issue.
> </side-track>
> There were some patches (cs/ 20437) that changed the IRQ mapping and I wonder
> if
> it inadvertly triggered this failure.
> Can you revert back before cs 20437 and compile Xen.gz? Here is one way I know
> of how to do this (there is probably a better one):
> mkdir ../test
> cd ../test
> hg clone ../xen-unstable.hg/ -r20436
> cd xen-unstable.hg
> hg tip
> (and it should show c/s 20436 as the latest).
--
Best regards,
Sander mailto:linux@xxxxxxxxxxxxxx
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home