|
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI
interface instead of a text console. During installation, I was able to copy
.Xclients to xstartup but after installation, .Xclients do not exist anymore
under my personal account. I have configured vncserver before in Linux and I
was able to port the GNOME desktop to my remote vnc client.
****************************************************************************
1) It's easy to to grab content of .Xclients just simulating
new install and
save content of .Xclients via any editor. Done just now
:-
20.
Spanish
21.
Swedish
To select desktop language, enter a number [default is 6]:
User selected: English
Configuring devices.
Mounting cdroms
Reading ZFS config: done.
opensolaris console login: jack
Password:
Sun Microsystems Inc. SunOS
5.11
snv_111b November 2008
jack@opensolaris:~$ cat .Xclients
#!/bin/ksh
#
# CDDL HEADER START
#
# For automatic login, we just invoke the default Gnome
desktop
exec /usr/bin/dtstart jds
jack@opensolaris:~$ Jul 27 06:03:51 opensolaris
in.routed[759]: route 0.0.0.0/8 --> 0.0.0.0 nexthop is not directly
connected
jack@opensolaris:~$ pfexec ifconfig -a
lo0:
flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1
netmask ff000000
xnf0:
flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index
2
inet 192.168.1.39
netmask ffffff00 broadcast 192.168.1.255
ether
0:16:3e:60:19:a
lo0:
flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
xnf0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu
1500 index 2
inet6
fe80::216:3eff:fe60:190a/10
ether
0:16:3e:60:19:a
NO PROBLEMS WITH OBTAIN IP VIA DHCPDISCOVER,DHCPACK,
....,DHCPOFFER
****************************************************************************
2) VNC Setup at OSOL DomU as suggested by SUN
cat /etc/X11/gdm/custom.conf
# GDM Custom Configuration file.
# overrides: /usr/share/gdm/defaults.conf
[daemon]
RemoteGreeter=/usr/lib/gdmgreeter
[security]
DisallowTCP=false
# AllowRoot=true
# AllowRemoteRoot=true
[xdmcp]
Enable=true
[gui]
[greeter]
[chooser]
[debug]
[servers]
Services restart:-
svcadm disable xvnc-inetd gdm
svcadm enable xvnc-inetd gdm
***************************************************************
2) I could not hard code IP address (static definition, not dhcp)
and network settings inside OpenSolaris like what I usually do in Linux. It
seems that configuring /etc/hostname.xnf0 did not help. My VM's actual
hostname is "opensolaris", so do I change that to /etc/opensolaris.xnf0?
After OpenSolaris PV guest boots up, I had to manually configure the IP
address, netmask and default route.
***************************************************************************
Switching OSOL DomU to static IP via SMF ( per Jurgen Keil
same as per Sun :) ) :-
View
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP at runtime:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.45 netmask 255.255.255.0 mtu
1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.45
To make the settings permanent you also need:
echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
******************************************************************************
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@xxxxxxxxxxxxxxx> wrote:
From: Teo En Ming <enming.teo@xxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@xxxxxxxxxxxxxxx>, "Boris
Derzhavets" <bderzhavets@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Monday, July 27, 2009, 7:25 AM
Dear All,
I am now able to run OpenSolaris 2009.06 32-bit
paravirtualized on Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6 on OpenSUSE 11.1
32-bit.
However, there are still some outstanding configuration
issues as I am not very familiar with Solaris UNIX. I am more of a Linux
guy.
1) I need to edit ~/.vnc/xstartup so that it will launch a
GUI interface instead of a text console. During installation, I was able to
copy .Xclients to xstartup but after installation, .Xclients do not exist
anymore under my personal account. I have configured vncserver before in
Linux and I was able to port the GNOME desktop to my remote vnc client.
2) I could not hard code IP address (static definition, not
dhcp) and network settings inside OpenSolaris like what I usually do in
Linux. It seems that configuring /etc/hostname.xnf0 did not help. My VM's
actual hostname is "opensolaris", so do I change that to
/etc/opensolaris.xnf0? After OpenSolaris PV guest boots up, I had to
manually configure the IP address, netmask and default route.
3) Configuring name servers in /etc/resolv.conf inside
Solaris did not work. But I could still go out to the internet by pinging
the IP addresses of Singapore's Starhub and Singnet ISP DNS servers. Just
that name resolution didn't work on Solaris.
Please see the screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
More questions:
4) Are there any paravirtualized device drivers/tools I can
install inside PV guests to enhance VM's performance? Like VMware tools?
5) Are there any benchmarking tools to measure I/O throughput
of my PV guests?
Thank you very much.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: "Teo En Ming" <enming.teo@xxxxxxxxxxxxxxx>
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Cc:
Date: Mon, 27 Jul 2009 18:22:17 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
I used the same ethernet network bridge in both
installation and actually running of the pv guest. During installation,
dhcpdiscover was sent out by the opensolaris pv guest. Dom 0 also sent out
DHCPOFFER. However, opensolaris pv guest could not configure the virtual
network interface using dhcp. So I had to manually configure the virtual
network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
To: xen-devel@xxxxxxxxxxxxxxxxxxx,
enming.teo@xxxxxxxxxxxxxxx
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
OK. What happens if you put the same vif=['bridge=...'] in OSOL
installation
profile. Are you unable to get IP for install in
this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@xxxxxxxxxxxxxxx> wrote:
From: Teo En Ming
<enming.teo@xxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the
dynamic IP address assignment from the dnsmasq dhcp server I have setup and
configured on Xen Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@xxxxxxxxx>
To: xen-devel@xxxxxxxxxxxxxxxxxxx,
enming.teo@xxxxxxxxxxxxxxx
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@xxxxxxxxxxxxxxx> wrote:
From: Teo En Ming
<enming.teo@xxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm
configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending
DHCPDISCOVER and my OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER
but the OpenSolaris virtual machine is not setting the offered dynamic IP
address to it's virtual NIC.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines
Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: "Boris Derzhavets"
<bderzhavets@xxxxxxxxx>
To:
<xen-devel@xxxxxxxxxxxxxxxxxxx>, <enming.teo@xxxxxxxxxxxxxxx>
Date: Mon, 27 Jul 2009 13:01:54
+0800
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
|
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run
with static IP:-
pfexec svcadm disable
network/physical:nwam && \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0
192.168.1.102 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default
192.168.1.102
which i can/do @ installer
time to use static IP assignements. i just
can't seem to get them to
'stick' or 'be happy' after reboot and xen,
run-time launch.
Use the same commands with
the installed system.
To make the settings
permanent you also need (Jurgen Keil) :
echo 192.168.1.102 netmask
255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 >
/etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@xxxxxxxxxxxxxxx
> wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@xxxxxxxxxxxxxxx >
Subject: Re: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@xxxxxxxxx,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Sunday, July 26,
2009, 5:08 AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Boris Derzhavets wrote:
Does your OpenSuse 11.1 32-bit has static IP address or it obtain
it via DHCP ?
If second option is
in place please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@xxxxxxxxxxxxxxx> wrote:
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE 11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there
are more network cards installed, there will be eth0, eth1, eth2 ethernet
bridges, etc.
Then I can assign
the virtual network card in each virtual machine to a specific ethernet
network bridge (out of many bridges) in Domain 0 using the vif command in
guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Mr. Teo En Ming
(Zhang Enming) wrote:
Dear Boris,
The ethernet
network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Boris Derzhavets
wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only
on RHEL 5.3
(F10 with Xen
3.3.1 src.rpm been installed along with generated packages) with libvirtd
& dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for
instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have
any experience with OpenSuse 11.1 . I hardly remind they tried to reproduce
RH's technology. Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your
OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no problems. Just
vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@xxxxxxxxxxxxxxx
> wrote:
From: Mr. Teo
En Ming (Zhang Enming) < enming.teo@xxxxxxxxxxxxxxx >
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
bderzhavets@xxxxxxxxx
Cc: "Sander
Eikelenboom" <linux@xxxxxxxxxxxxxx>, Pasi Kr@xxxxxxxxx,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Saturday,
July 25, 2009, 12:32 PM
Dear Boris,
This means I
have to install a DHCP server or dnsmasq in my Dom 0, listening on my Dom
0's IP address, so that it can assign dynamic IP addresses to the DomU.
By the way,
are there any paravirtualized device drivers that I can install in DomU to
improve the performance of the virtual machine?
Thank
you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Boris
Derzhavets wrote:
|
>I noticed under the guest domain
configuration there is a parameter called >'extra' kernel parameter. Does
the 'nowin' argument stand for no >graphical windows?
Login as
jack/jack to text console.
Wait
until :-
$ pfexec
ifconfig -a
will show
up your IPv4 address
$ mkdir
.vnc
$ cp
.Xclients .vnc/xstartup
$
vncserver
Connect
via vncviewer IP-DomU:1 from another terminal session to OSOL DomU. In case
OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me
know. It might happen and requires Solaris Kernel Model Debugger
to
disable checksum offloading at boot up. Seems to be hardware dependent issue
for OSOL 2009.06
**********************************
Copy
ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat
osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk =
"/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix -
nowin -B install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
Boris
--- On
Sat, 7/25/09, Mr. Teo En Ming (Zhang
Enming) <
enming.teo@xxxxxxxxxxxxxxx > wrote:
From: Mr.
Teo En Ming (Zhang Enming) < enming.teo@xxxxxxxxxxxxxxx >
Subject:
Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@xxxxxxxxxxxxxxx
Cc:
"Sander Eikelenboom" <linux@xxxxxxxxxxxxxx>, "Boris Derzhavets"
<bderzhavets@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx,
=?ISO-8859-1?Q?Pasi_K=E4r?=@xxxxxxxxx
Date:
Saturday, July 25, 2009, 7:14 AM
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Teo En
Ming wrote:
As a matter of fact, our servers are either
Dell PowerEdge 1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of Singapore
Mobile Phone : +65-9648-9798
MSN:
teoenming@xxxxxxxxxxx
-----Original
Message-----
From:
"Teo En Ming" < enming.teo@xxxxxxxxxxxxxxx >
To:
"Boris Derzhavets" <bderzhavets@xxxxxxxxx>, "Pasi Kärkkäinen"
<pasik@xxxxxx>
Cc:
Sander Eikelenboom <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date:
Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of Singapore
Mobile Phone : +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
To:
Pasi Kärkkäinen <pasik@xxxxxx>, enming.teo@xxxxxxxxxxxxxxx
Cc:
Sander Eikelenboom <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
|
Teo, it is up to you how to manage, if you
just having fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming
< enming.teo@xxxxxxxxxxxxxxx >
wrote:
From: Teo En Ming < enming.teo@xxxxxxxxxxxxxxx >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>, "Pasi Kärkkäinen"
<pasik@xxxxxx>
Cc: "Sander Eikelenboom" <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Friday, July 24, 2009, 12:56 PM
My colleague installed OpenSUSE 11.1 32-bit on
the Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install 64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on 32-bit
Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone : +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
To: enming.teo@xxxxxxxxxxxxxxx , Pasi Kärkkäinen
<pasik@xxxxxx>
Cc: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
|
Once again, i don't see any
reason to to run 32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris
Derzhavets
<bderzhavets@xxxxxxxxx> wrote:
From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@xxxxxxxxxxxxxxx , "Pasi Kärkkäinen"
<pasik@xxxxxx>
Cc: "Sander Eikelenboom" <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Friday, July 24, 2009, 12:47 PM
|
>After doing the above, I re-installed back the Xen hypervisor, libraries
and tools, and also >the kernel, initrd, and modules. Then I proceeded to
reboot my machine. After rebooting, > my CentOS 4.7 32-bit PV guest is
still able to start and run!
Why it wouldn't ? If your image stays the same.
> I am still very puzzled!
What causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS
(without any built in xen presence) install , followed by Xen
3.4.1+pvops kernel clean install.
Boris.
--- On Fri, 7/24/09, Teo
En Ming <
enming.teo@xxxxxxxxxxxxxxx > wrote:
From: Teo En Ming < enming.teo@xxxxxxxxxxxxxxx >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
To: "Teo En Ming" < enming.teo@xxxxxxxxxxxxxxx >, "Pasi
Kärkkäinen" <pasik@xxxxxx>
Cc: "Sander Eikelenboom" <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Friday, July 24, 2009, 12:19 PM
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit PV
guest being able to run, I have uninstalled virt-manager and all of its
dependencies:
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, my CentOS 4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently causes
the PV guest to suddenly be able to start and run???
Anyway my CentOS 4.7 guest
domain is now running. I shall now proceed to virtualize OpenSolaris
2009.06.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: "Teo En Ming" < enming.teo@xxxxxxxxxxxxxxx >
To: "Teo En Ming" < enming.teo@xxxxxxxxxxxxxxx >,
"Pasi Kärkkäinen" <pasik@xxxxxx>
Cc: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
It's very strange. Suddenly
my CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install virt-manager,
it also tries to install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies.
However, I started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8
branch.
I need to investigate more
why suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: "Teo En Ming" < enming.teo@xxxxxxxxxxxxxxx >
To: "Pasi Kärkkäinen" <pasik@xxxxxx>
Cc: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting the
guest disk image file. I mounted the guest disk image file using losetup and
kpartx which adds device nodes to /dev/mapper. I examined the /boot
directory after mounting the guest disk image file and found no PAE vmlinuz
and initrd.
Still using the mounted
Fedora 10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration of
the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now (since
the PAE kernel is xen-aware) but then it complains cannot mount /dev/root.
Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: Pasi Kärkkäinen <pasik@xxxxxx>
To: Teo En Ming < enming.teo@xxxxxxxxxxxxxxx >
Cc: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>,
xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo
En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV
guest using
> images/pxeboot/vmlinuz-PAE and
images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the
installer. I finished my Fedora
> 10 32-bit PV guest installation but it also
cannot boot up after
> installation, same as the CentOS 4.7 PV guest
installation.
>
Fedora 10 installer has a bug, as a default it
installs non-PAE kernel for
xen domU. You need to use a kickstart script (like
this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are
compiled with pv_ops Xen domU
support enabled, so there's no need for separate
kernel-xen with these distros).
Fedora 11 doesn't have that installer bug, so it
installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest
after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
|
-----Inline Attachment Follows-----
|
-----Inline Attachment Follows-----
|
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No
virus found in this outgoing message.
Checked
by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline Attachment Follows-----
|
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
No virus
found in this outgoing message.
Checked by
AVG -
www.avg.com
Version:
8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline
Attachment Follows-----
|
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
No virus found in
this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 /
Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline
Attachment Follows-----
|
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus
Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
|
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus
Database: 270.13.24/2255 - Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
|
|
-----Inline Attachment Follows-----
|
Home