Re: [Xen-devel] Unplugging a dom0 vcpu and domain destruction

[Jeremy Fitzhardinge <jeremy@xxxxxxxx>]

George Dunlap wrote:
> OK, I finally popped off all the interrupts on my stack and got back to this.
>
> The put_domain() that finally destroys the domains (after plugging
> back in the cpu) is in page_alloc.c:931, in free_domheap_pages().
>
> Here's the callstack from xen:
>
> (XEN)    [<ffff828c80112cd6>] free_domheap_pages+0x3a9/0x427
> (XEN)    [<ffff828c8014f0e3>] put_page+0x4b/0x52
> (XEN)    [<ffff828c80150236>] put_page_from_l1e+0x137/0x1ae
> (XEN)    [<ffff828c80155ed0>] ptwr_emulated_update+0x555/0x57c
> (XEN)    [<ffff828c80155fa3>] ptwr_emulated_cmpxchg+0xac/0xb5
> (XEN)    [<ffff828c80176511>] x86_emulate+0xf876/0xfb5d
> (XEN)    [<ffff828c8014f523>] ptwr_do_page_fault+0x15c/0x190
> (XEN)    [<ffff828c80164d8c>] do_page_fault+0x3b8/0x571
>
> So the thing that finally destroys the domain is unmapping its last
> outstanding domheap page from dom0's pagetables.  It was unmapped from
> vcpu 1 (which had just come back online), from
> linux/mm/memory.c:unmap_vmas().
>
> I confirmed that there were two outstanding unmapped pages of the
> "zombie domain" using the 'q' debug key:
> (XEN) General information for domain 2:
> (XEN)     refcnt=1 dying=2 nr_pages=2 xenheap_pages=0 dirty_cpus={}
> max_pages=8192
> (XEN)     handle=a7c2bcb8-e647-992f-9e15-7313072a36bf vm_assist=00000008
> (XEN) Rangesets belonging to domain 2:
> (XEN)     Interrupts { }
> (XEN)     I/O Memory { }
> (XEN)     I/O Ports  { }
> (XEN) Memory pages belonging to domain 2:
> (XEN)     DomPage 000000000003d64f: caf=00000001, taf=e800000000000001
> (XEN)     DomPage 000000000003d64e: caf=00000001, taf=e800000000000001
> (XEN) VCPU information and callbacks for domain 2:
> (XEN)     VCPU0: CPU0 [has=F] flags=1 poll=0 upcall_pend = 00,
> upcall_mask = 00 dirty_cpus={} cpu_affinity={0-31}
> (XEN)     100 Hz periodic timer (period 10 ms)
> (XEN)     Notifying guest (virq 1, port 0, stat 0/-1/0)
>
> I'm not sure if this is relevant, but looks that while dom0's vcpu 1
> was offline, it had a pending interrupt:
>
> (XEN)     VCPU1: CPU0 [has=F] flags=2 poll=0 upcall_pend = 01,
> upcall_mask = 01 dirty_cpus={} cpu_affinity={0-31}
> (XEN)     100 Hz periodic timer (period 10 ms)
> (XEN)     Notifying guest (virq 1, port 0, stat 0/-1/-1)
>
> So it appears that when vcpu 1 is offline, it never successfully
> removes mappings for the domU until vcpu 1 comes back online.
>
> I don't know enough about the unmapping process... Jeremy, do you know
> anything about the process for unmapping domU memory from dom0 when
> the domU is being destroyed in the linux-2.6.18-xen.hg tree?  More
> specifically, why if I take dom0's vcpu 1 offline (via the /sys
> interface), why the unmapping doesn't happen until I bring vcpu 1
> online?
>   
Is it that the offline cpu still has a cr3 reference to a pagetable, and 
that's not being given up?  Or gdt?
In the pvops kernels we also keep a reference to the vcpu info 
structure, since we place it the kernel's memory rather than keeping it 
in the shared info structure.  For a while that had bugs that left 
zombie domains lying around, but I don't think anyone backported that 
stuff to 2.6.18.
   J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel