| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
RE: [Xen-devel] boot failure in recent cset... dom0 compat issue?
> Sorry, that was a typo, should have been 3.3(.0)-timeframe
> 2.6.18.8-based dom0, built 2008 Sept 18, probably from whatever
> was auto-hg-pull'ed by a Xen build on that day. (Is there
> a way similar to xm info to check the c/s of a dom0?)
In case it matters, it appears dom0 was c/s 664 from
http://xenbits.xensource.com/linux-2.6.18-xen.hg
(Found from code examination... is there a better way
to find the c/s of a dom0?)
> -----Original Message-----
> From: Dan Magenheimer
> Sent: Friday, January 30, 2009 8:40 AM
> To: Keir Fraser; Xen-Devel (E-mail)
> Subject: RE: [Xen-devel] boot failure in recent cset... dom0 compat
> issue?
>
>
> I can confirm that c/s 19064 boots my dom0 fine and
> c/s 19065 fails to boot.
>
> > > 3.1-timeframe 2.6.18.8-based dom0.
>
> Sorry, that was a typo, should have been 3.3(.0)-timeframe
> 2.6.18.8-based dom0, built 2008 Sept 18, probably from whatever
> was auto-hg-pull'ed by a Xen build on that day. (Is there
> a way similar to xm info to check the c/s of a dom0?)
>
> My machine is a standard Intel Weybridge box (though
> its possible the firmware is old).
>
> > -----Original Message-----
> > From: Keir Fraser [mailto:keir.fraser@xxxxxxxxxxxxx]
> > Sent: Thursday, January 29, 2009 3:32 PM
> > To: Dan Magenheimer; Xen-Devel (E-mail)
> > Subject: Re: [Xen-devel] boot failure in recent cset... dom0 compat
> > issue?
> >
> >
> > Shouldn't be a dom0 compat issue. More likely something to do
> > with the Xen
> > heap removal. Some issues are fixed already but perhaps more
> > are lurking.
> >
> > -- Keir
> >
> > On 29/01/2009 22:12, "Dan Magenheimer"
> > <dan.magenheimer@xxxxxxxxxx> wrote:
> >
> > > Hmmm... somewhere between xen-unstable cset 19043 and 19109
> > > my Intel Weybridge box stops booting dom0. Is this a known
> > > problem? I am admittedly trying to boot a 4 months old
> > > 3.1-timeframe 2.6.18.8-based dom0. Were hypervisor changes
> > > made recently that render older dom0's useless? (I realize
> > > this happens sometimes with xen-unstable, just wondering if
> > > this is indeed the problem and, if so, if it was intentional.)
> > >
> > > Thanks,
> > > Dan
> > >
> > >
> > > (XEN) PCI add device 00:03.2
> > > (XEN) PCI remove device 00:03.2
> > > (XEN) PCI add device 00:1f.5
> > > (XEN) PCI remove device 00:1f.5
> > > (XEN) PCI add device 00:1a.7
> > > (XEN) PCI add device 00:1d.7
> > > (XEN) PCI add device 00:1a.0
> > > (XEN) PCI add device 00:1a.1
> > > (XEN) PCI add device 00:1a.2
> > > (XEN) PCI add device 00:1d.0
> > > (XEN) PCI add device 00:1d.1
> > > (XEN) PCI add device 00:1d.2
> > > (XEN) PCI add device 00:1f.2
> > > ata1.00: failed to set xfermode (err_mask=0x104)
> > > ata1: port failed to respond (30 secs)
> > > ata1: COMRESET failed (device not ready)
> > > ata1.00: revalidation failed (errno=-5)
> > > ata1: port failed to respond (30 secs)
> > > ata1: COMRESET failed (device not ready)
> > > ata1.00: revalidation failed (errno=-5)
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-devel
> >
> >
> >
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home