Hi Dowen,
I think the problem here is nr_pages, which is calculated by the
function compute_dom0_nr_pages() in domain_build.c, and which
ultimately derives from dom0_nrpages (if dom0_mem is set on the
command line) or the total amount of memory. So it's probably trying
to allocate the same amount of physical memory to both Dom0 and Dom1,
which is causing it to fail. For the moment, it might work if you set
dom0_mem to a small amount of memory, but you would ultimately need to
change this logic to ensure that both domains could coexist in the
default case.
Regards,
Derek.
2008/6/3 文成建 <wenchengjian@xxxxxxxxxxxxxxx>:
> Hi Derek,
> I have tried your two suggestions.
> Remove the following lines;
>
> 1. *BUG_ON(d->domain_id != 0);*
> 2. discard_initial_images();
>
> xen still panic on the same point.
> (XEN) Xen call trace:
> (XEN) [<ff119d34>] elf_is_elfbinary+0x4/0x20
> (XEN) [<ff11af53>] elf_init+0x13/0x520
> (XEN) [<ff10ec8b>] avail_heap_pages+0x2b/0xa0
> (XEN) [<ff12284c>] construct_dom0+0x13c/0x1830
> (XEN) [<ff11ee10>] put_newline+0x50/0x80
> (XEN) [<ff11c957>] sercon_puts+0x27/0x30
> (XEN) [<ff11c9b1>] __putstr+0x51/0x60
> (XEN) [<ff1971e8>] __start_xen+0xe28/0xf80
> (XEN) [<ff10018a>] no_execute_disable+0x53/0x55
> (XEN)
> (XEN) Pagetable walk from 00c00000:
> (XEN) L3[0x000] = 00000000001c8001 55555555
> (XEN) L2[0x006] = 0000000000000000 ffffffff
>
> 00c00000 is the address for _image_start. the address for kernel image
> has been unmapped though I have disabled discard_initial_images.
> So we found there is another place to unmap kernel image-zap_low_mappings
> /* */* **zap_low_mappings(l2start);
> zap_low_mappings(idle_pg_table_l2);*/*
>
> */Construct_dom0 can still use kernel image by not calling them at the
> first time being called by __start_xen.
> But another problem occurs. Construct_dom0 will panic on fowlling lines:/*
> */*if ( (page = alloc_chunk(d, nr_pages - d->tot_pages)) == NULL )
> panic("Not enough RAM for /_DOM1_/ reservation.n");
> *Note dom0 can be constructed completely. Panic happens at the second
> time construct_dom0 is called.
> Since I know little about the memory allocation of domain0 I need your
> suggestion about how to reserve memory for the another
> privileged domain.*
> *
> Regards,
> Dowen
>
> Derek Murray 写道:
>> Hi Dowen,
>>
>> Okay - this might prove to be an interesting effort!
>>
>> I assume you're seeing panics in construct_dom0, the second time that
>> you call it.
>>
>> First of all, I presume that you've removed this line:
>>
>> /* Sanity! */
>> BUG_ON(d->domain_id != 0);
>>
>> ...which will cause a bug in the hypervisor at the second instance of
>> calling it.
>>
>> Your reference to the ELF image being changed might be to do with this line:
>>
>> /* Free temporary buffers. */
>> discard_initial_images();
>>
>> ...also in construct_dom0. The second time round, these buffers will
>> have been freed, which is probably why you're getting garbage for the
>> second domain. So you'll want to move this out into the calling
>> function.
>>
>> Hope this helps, and let me know how you get it.
>>
>> Regards,
>>
>> Derek.
>>
>> 2008/6/2 文成建 <wenchengjian@xxxxxxxxxxxxxxx>:
>>
>>> Hi Derek,
>>> Thank you very much for your response. Your suggestion helps me a lot.
>>> What you said at the very beginning of your mail is exactly what I want
>>> for my purpose.
>>> Though it is not ideal method I'd like to implement it to train myself
>>> on xen technology.
>>> Soon later maybe I'll be able to implement the method you suggest.
>>> Now I am trying to build two privileged domain mainly by calling
>>> /*construct_dom0*/ two times
>>> at the fuction of /*__start_xen. */ I realized that the reason for panic
>>> is orginal domain0 kernel image has been changed
>>> after construct_dom0. But I can't find how it has been changed. If I
>>> know the details I can avoid the step changing the elf image
>>> or I can prepare the elf image once again. Right?
>>> I need your help about it. Thanks in advance!
>>>
>>> Regards,
>>> Dowen
>>>
>>>
>>> Derek Murray 写道:
>>>
>>>> Hi Dowen,
>>>>
>>>> It would be possible to create two privileged domains at boot time (by
>>>> modifying the hypervisor to make it possible for the domain builder to
>>>> create more than one initial domain; or you could add a privileged
>>>> hypercall to make other domains privileged, and modify the domain
>>>> builder in Dom0). However, I'm not sure that this is what you would
>>>> want for your purposes.
>>>>
>>>> If Dom0 crashes, it typically brings down the whole physical machine,
>>>> because Dom0 is responsible for managing various parts of the physical
>>>> platform. Therefore, I don't think it would be straightforward to
>>>> perform failover to a second Dom0 in the event of the primary Dom0
>>>> crashing.
>>>>
>>>> Perhaps a better idea would be to have a stripped-down Linux that acts
>>>> as Dom0 for managing the platform, but which has no user-space
>>>> applications or device drivers (and therefore would be much less
>>>> likely to shut down unexpectedly). Then you could use PCI device
>>>> passthrough to a second privileged domain (say, Dom1), which then runs
>>>> the management software and hosts the physical device drivers.
>>>> Although it wouldn't be bulletproof (since a malfunctioning device
>>>> driver could probably still hose the entire system, unless you use
>>>> VT-d or similar), you could probably restart Dom1 if it crashed. You'd
>>>> need to modify some of the tools to make things like XenStore (which
>>>> holds configuration details for the domains) persist across reboots.
>>>> You might also benefit from looking at the domain save/restore code so
>>>> that, if Dom1 crashes, all domains would be paused while it is
>>>> rebooted, and restored when it is running again.
>>>>
>>>> Regards,
>>>>
>>>> Derek Murray.
>>>>
>>>> On Thu, May 29, 2008 at 5:55 PM, 文成建 <wenchengjian@xxxxxxxxxxxxxxx> wrote:
>>>>
>>>>
>>>>> Hi All,
>>>>> I am not very familiar with xen details. Now I am thinking of building
>>>>> two
>>>>> privilged domain(domain 0 not driver domain) at boot time.
>>>>> The other question is that wether i se
>>>>> when domain 0 is shut down unexpectedly another domain 0 can run at once.
>>>>> Maybe it is absurd. I am looking forwards to your suggestions.
>>>>>
>>>>> Regards,
>>>>> Dowen
>>>>>
>>>>> _______________________________________________
>>>>> Xen-devel mailing list
>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>>
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home