|
|
|
|
|
|
|
|
|
|
xen-devel
Re: [Xen-devel] [VTD-NEO][patch 0/6] Intel VT-d/Neocleus 1:1 mreged code
I replaced the files. The problem still occurs.
John
Kay, Allen M wrote:
Other than minor changes while rebasing from 15521 to 15730. The
following files have been modified that might affect functionality:
Tools/hvmloader/32bitbios_support.c:
removed a hack to increase highbiosarea size.
Tools/ioemu/hw/pass-throught.c/pt_pci_write_config():
for is_native=1 case, pass-through pci config writes. Otherwise,
pass-through only access to command register (for vt-d case). Note that
we will use a different switch variable once it is added.
These are minor changes, you might want to replace these file from the
ones from direct-io tree to see if it fixes your problem.
Allen
-----Original Message-----
From: John Byrne [mailto:john.l.byrne@xxxxxx]
Sent: Thursday, September 06, 2007 4:16 PM
To: Kay, Allen M
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Guy Zana; Keir Fraser
Subject: Re: [Xen-devel] [VTD-NEO][patch 0/6] Intel
VT-d/Neocleus 1:1 mreged code for PCI passthrough
When I use these patches and start a nativedom with a
directly-assigned
NIC and no IOMMU, I get a lock up. Running the same
domain/configuration/machine with the direct-io.hg tree worked
fine. The
crash output is below. If you'd like more information, let me know.
John Byrne
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) pt_irq.c:81:d1 invalid assert_option value
(XEN) WARNING: send pio with something already pending (9)?
(XEN) domain_crash_sync called from hvm.c:485
(XEN) Domain 1 (vcpu#0) crashed on cpu#7:
(XEN) ----[ Xen-3.0-unstable x86_32 debug=n Not tainted ]----
(XEN) CPU: 7
(XEN) EIP: 0000:[<00100fcb>]
(XEN) EFLAGS: 00000002 CONTEXT: hvm
(XEN) eax: 00000064 ebx: 001390c4 ecx: 001390c4 edx: 000000e9
(XEN) esi: 00103762 edi: 00101bf0 ebp: 00139038 esp: 00139038
(XEN) cr0: 00000011 cr4: 00000000 cr3: 00000000 cr2: 00000000
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: 0000
(XEN) domain_crash_sync called from hvm.c:132
(XEN) domain_crash_sync called from hvm.c:132
(XEN) domain_crash_sync called from hvm.c:132
(XEN) domain_crash_sync called from hvm.c:132
....
(XEN) *** [ Xen-3.0-unstable x86_32 debug=n Not tainted ]----(XEN)
----[ Xen-3.0-unstable x86_32 debug=n Not tainted ]----(XEN) e
x86_32 debug=n Not tainted ]----
(XEN) ----[ Xen-3.0-unstable x86_32 debug=n Not tainted ]----
(XEN) CPU: 6
(XEN) CPU: 6(XEN) idle_loop+0x1b/0x90+010246 CONTEXT: hypervisor
(XEN) EFLAGS: 00010246 CONTEXT: hypervisor
(XEN) eax: 00000300 ebx: ffbe7fb4 ecx: 00000000 edx: 00000006
(XEN) esi: ff1a8430 edi: 91d91b27 ebp: 0000001c esp: ffbe7fa8
(XEN) cr0: 8005003b cr4: 000026d0 cr3: 3c6ee000 cr2: b7bf7000
(XEN) ds: e010 es: e010 fs: 0000 gs: 0000 ss: e010 cs: e008
(XEN) do_page_fault+0x45/0x3b0
(XEN) (XEN) Xen stac00010246Xen stac00010246
CR3: 00000000(XEN) ffbea080
ax: 6563696c ebx: 0000e010 ecx: 00010246 edx: ff1b7fb4(XEN)
ffbea080 00000001
si: 0000e010 edi: 00000000 ebp: ff1b40ec esp: ff1b40a8(XEN)
00000000
s: e010 es: e010 fs: 0000 gs: 0000 ss: e010(XEN) c1351f90
00000006 00000006
00000006
(XEN) c03d7180 00000000 000e0007 c01013a7 00000061 00000246
c1351f8c
00000069
(XEN) 0000007b 0000007b 00000000 00000000 00000006 ffbea080
(XEN) Xen call trace:
(XEN) [<ff1209fb>] idle_loop+0x1b/0x90
(XEN)
Kay, Allen M wrote:
The following 6 patches contains merge of Intel VT-d and
Neocleus' 1:1
mapping patches for enabling HVM guest direct device access that were
last submitted around end of May. These patches applied cleanly to
changeset 15730.
To enabled xen vt-d code, add "ioapic_ack=old" to xen boot
parameter in
grub.conf on systems with VT-d hardware.
To enabled xen 1:1 mapping code, add "enabled_nativedom=1"
to xen boot
parameter in grub.conf.
Signed-off-by: Allen Kay <allen.m.kay@xxxxxxxxx>
Signed-off-by: Guy Zana <guy@xxxxxxxxxxxx>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
|
|