|
xen-devel
[Xen-devel] Re: [XenPPC] [PATCH 6/6][TOOLS][XM-TEST] Add configuration d
couple things
On Sep 29, 2006, at 5:57 AM, Tony Breeds wrote:
Add configuration data for powerpc.
Allows for building of initrd, and running of tests.
Signed-off-by: Tony Breeds <tony@xxxxxxxxxxxxxxxxxx>
---
tools/xm-test/lib/XmTestLib/arch.py | 30 +
tools/xm-test/lib/XmTestReport/arch.py | 6
tools/xm-test/ramdisk/Makefile.am | 2
tools/xm-test/ramdisk/configs/buildroot-powerpc | 334 +++++++++++++
+++
4 files changed, 371 insertions(+), 1 deletion(-)
diff -r 989b397808f8 -r 82402a95e380 tools/xm-test/lib/XmTestLib/
arch.py
--- a/tools/xm-test/lib/XmTestLib/arch.py Fri Sep 29 17:11:31 2006
+1000
+++ b/tools/xm-test/lib/XmTestLib/arch.py Fri Sep 29 20:52:32 2006
+1000
@@ -80,6 +80,29 @@ ia_HVMDefaults = {"memory" :
}
# End : Intel ia32 and ia64 as well as AMD 32-bit and 64-bit
processors
+# Begin: PowerPC
+def ppc_minSafeMem():
+ return 64
+
+def ppc_getDeviceModel():
+ return "/usr/lib64/xen/bin/qemu-dm"
This can not be correct, I suppose it should return nothing?
+
+def ppc_getDefaultKernel():
+ """Get the path to the default DomU kernel"""
+ dom0Ver = commands.getoutput("uname -r");
+ domUVer = dom0Ver.replace("xen0", "xenU");
+
+ return "/boot/vmlinux-" + domUVer;
+
+ppc_ParavirtDefaults = {"memory" : 64,
+ "vcpus" : 1,
+ "kernel" : ppc_getDefaultKernel(),
+ "root" : "/dev/ram0",
+ "ramdisk" : getRdPath() + "/initrd.img",
+ "extra" : "xencons=tty128 console=tty128",
+}
+# End : PowerPC
+
"""Convert from uname specification to a more general platform."""
_uanme_to_arch_map = {
"i386" : "x86",
@@ -87,6 +110,8 @@ _uanme_to_arch_map = {
"i586" : "x86",
"i686" : "x86",
"ia64" : "ia64",
+ "ppc" : "powerpc",
+ "ppc64" : "powerpc",
}
_uanme this must be one pervasive typo
# Lookup current platform.
@@ -99,5 +124,10 @@ if _arch == "x86" or _arch == "ia64":
configDefaults = ia_HVMDefaults
else:
configDefaults = ia_ParavirtDefaults
+elif _arch == "powerpc":
+ minSafeMem = ppc_minSafeMem
+ getDeviceModel = ppc_getDeviceModel
+ getDefaultKernel = ppc_getDefaultKernel
+ configDefaults = ppc_ParavirtDefaults
else:
raise ValueError, "Unknown architecture!"
diff -r 989b397808f8 -r 82402a95e380 tools/xm-test/lib/XmTestReport/
arch.py
--- a/tools/xm-test/lib/XmTestReport/arch.py Fri Sep 29 17:11:31
2006 +1000
+++ b/tools/xm-test/lib/XmTestReport/arch.py Fri Sep 29 20:52:32
2006 +1000
@@ -29,6 +29,8 @@ _uanme_to_arch_map = {
"i586" : "x86",
"i686" : "x86",
"ia64" : "ia64",
+ "ppc" : "powerpc",
+ "ppc64" : "powerpc",
}
_uanme again, even that japanese to english dictionary doesn't know
what it is :)
_arch = _uanme_to_arch_map.get(os.uname()[4], "Unknown")
@@ -38,5 +40,9 @@ elif _arch == "ia64":
elif _arch == "ia64":
cpuValues = {"arch" : "Unknown",
"features" : "Unknown"}
+elif _arch == "powerpc":
+ cpuValues = {"cpu" : "Unknown",
+ "platform" : "Unknown",
+ "revision" : "Unknown"}
else:
raise ValueError, "Unknown architecture!"
diff -r 989b397808f8 -r 82402a95e380 tools/xm-test/ramdisk/Makefile.am
--- a/tools/xm-test/ramdisk/Makefile.am Fri Sep 29 17:11:31 2006 +1000
+++ b/tools/xm-test/ramdisk/Makefile.am Fri Sep 29 20:52:32 2006 +1000
@@ -2,7 +2,7 @@ INITRD ?= http://xm-test.xensource.com/r
EXTRA_DIST = skel configs patches
-BR_ARCH = $(shell uname -m | sed -e s/i.86/i386/)
+BR_ARCH = $(shell uname -m | sed -e s/i.86/i386/ -e 's/ppc\(64\)*/
powerpc/')
BR_TAR = buildroot-snapshot.tar.bz2
BR_URL = http://buildroot.uclibc.org/downloads/snapshots/$(BR_TAR)
diff -r 989b397808f8 -r 82402a95e380 tools/xm-test/ramdisk/configs/
buildroot-powerpc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/tools/xm-test/ramdisk/configs/buildroot-powerpc Fri Sep 29
20:52:32 2006 +1000
@@ -0,0 +1,334 @@
+#
+# Automatically generated make config: don't edit
+#
+BR2_HAVE_DOT_CONFIG=y
+# BR2_alpha is not set
+# BR2_arm is not set
+# BR2_armeb is not set
+# BR2_cris is not set
+# BR2_i386 is not set
+# BR2_m68k is not set
+# BR2_mips is not set
+# BR2_mipsel is not set
+# BR2_nios2 is not set
+BR2_powerpc=y
+# BR2_sh is not set
+# BR2_sh64 is not set
+# BR2_sparc is not set
+# BR2_x86_64 is not set
+# BR2_x86_i386 is not set
+# BR2_x86_i486 is not set
+# BR2_x86_i586 is not set
+# BR2_x86_i686 is not set
+BR2_ARCH="powerpc"
+BR2_ENDIAN="BIG"
+
+#
+# Build options
+#
+BR2_WGET="wget --passive-ftp"
+BR2_SVN="svn co"
+BR2_TAR_OPTIONS=""
+BR2_DL_DIR="$(BASE_DIR)/dl"
+BR2_SOURCEFORGE_MIRROR="easynews"
+BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
+BR2_TOPDIR_PREFIX=""
+BR2_TOPDIR_SUFFIX=""
+BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
+BR2_GNU_TARGET_SUFFIX="linux-uclibc"
+BR2_JLEVEL=1
+
+#
+# Toolchain Options
+#
+
+#
+# Kernel Header Options
+#
+# BR2_KERNEL_HEADERS_2_4_25 is not set
+# BR2_KERNEL_HEADERS_2_4_27 is not set
+# BR2_KERNEL_HEADERS_2_4_29 is not set
+# BR2_KERNEL_HEADERS_2_4_31 is not set
+# BR2_KERNEL_HEADERS_2_6_9 is not set
+# BR2_KERNEL_HEADERS_2_6_11 is not set
+BR2_KERNEL_HEADERS_2_6_12=y
+BR2_DEFAULT_KERNEL_HEADERS="2.6.12"
+
+#
+# uClibc Options
+#
+# BR2_UCLIBC_VERSION_SNAPSHOT is not set
+# BR2_ENABLE_LOCALE is not set
+# BR2_PTHREADS_NONE is not set
+# BR2_PTHREADS is not set
+BR2_PTHREADS_OLD=y
+# BR2_PTHREADS_NATIVE is not set
+
+#
+# Binutils Options
+#
+# BR2_BINUTILS_VERSION_2_14_90_0_8 is not set
+# BR2_BINUTILS_VERSION_2_15 is not set
+# BR2_BINUTILS_VERSION_2_15_94_0_2_2 is not set
+# BR2_BINUTILS_VERSION_2_16_1 is not set
+# BR2_BINUTILS_VERSION_2_16_90_0_3 is not set
+# BR2_BINUTILS_VERSION_2_16_91_0_5 is not set
+# BR2_BINUTILS_VERSION_2_16_91_0_6 is not set
+# BR2_BINUTILS_VERSION_2_16_91_0_7 is not set
+BR2_BINUTILS_VERSION_2_17=y
+# BR2_BINUTILS_VERSION_2_17_50_0_2 is not set
+# BR2_BINUTILS_VERSION_2_17_50_0_3 is not set
+BR2_BINUTILS_VERSION="2.17"
+BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
+
+#
+# Gcc Options
+#
+# BR2_GCC_VERSION_3_3_5 is not set
+# BR2_GCC_VERSION_3_3_6 is not set
+BR2_GCC_VERSION_3_4_2=y
+# BR2_GCC_VERSION_3_4_3 is not set
+# BR2_GCC_VERSION_3_4_4 is not set
+# BR2_GCC_VERSION_3_4_5 is not set
+# BR2_GCC_VERSION_3_4_6 is not set
+# BR2_GCC_VERSION_4_0_0 is not set
+# BR2_GCC_VERSION_4_0_1 is not set
+# BR2_GCC_VERSION_4_0_2 is not set
+# BR2_GCC_VERSION_4_0_3 is not set
+# BR2_GCC_VERSION_4_1_0 is not set
+# BR2_GCC_VERSION_4_1_1 is not set
+# BR2_GCC_VERSION_4_2 is not set
+# BR2_GCC_IS_SNAP is not set
+BR2_GCC_VERSION="3.4.2"
+# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
+BR2_EXTRA_GCC_CONFIG_OPTIONS=""
+# BR2_INSTALL_LIBSTDCPP is not set
+# BR2_INSTALL_OBJC is not set
+
+#
+# Ccache Options
+#
+BR2_CCACHE=y
+
+#
+# Gdb Options
+#
+# BR2_PACKAGE_GDB is not set
+# BR2_PACKAGE_GDB_SERVER is not set
+# BR2_PACKAGE_GDB_HOST is not set
+
+#
+# elf2flt
+#
+# BR2_ELF2FLT is not set
+# BR2_MKLIBS is not set
+
+#
+# Common Toolchain Options
+#
+# BR2_PACKAGE_SSTRIP_TARGET is not set
+# BR2_PACKAGE_SSTRIP_HOST is not set
+BR2_ENABLE_MULTILIB=y
+BR2_LARGEFILE=y
+# BR2_SOFT_FLOAT is not set
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
+BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
+
+#
+# Package Selection for the target
+#
+
+#
+# The default minimal system
+#
+BR2_PACKAGE_BUSYBOX=y
+# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
+BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox.config"
+
+#
+# The minimum needed to build a uClibc development system
+#
+# BR2_PACKAGE_BASH is not set
+# BR2_PACKAGE_BZIP2 is not set
+# BR2_PACKAGE_COREUTILS is not set
+# BR2_PACKAGE_DIFFUTILS is not set
+# BR2_PACKAGE_ED is not set
+# BR2_PACKAGE_FINDUTILS is not set
+# BR2_PACKAGE_FLEX is not set
+# BR2_PACKAGE_GAWK is not set
+# BR2_PACKAGE_GCC_TARGET is not set
+# BR2_PACKAGE_CCACHE_TARGET is not set
+# BR2_PACKAGE_GREP is not set
+# BR2_PACKAGE_MAKE is not set
+# BR2_PACKAGE_PATCH is not set
+# BR2_PACKAGE_SED is not set
+# BR2_PACKAGE_TAR is not set
+
+#
+# Other stuff
+#
+# BR2_PACKAGE_ACPID is not set
+# BR2_PACKAGE_ASTERISK is not set
+# BR2_PACKAGE_AT is not set
+# BR2_PACKAGE_AUTOCONF is not set
+# BR2_PACKAGE_AUTOMAKE is not set
+# BR2_PACKAGE_BERKELEYDB is not set
+# BR2_PACKAGE_BIND is not set
+# BR2_PACKAGE_BISON is not set
+# BR2_PACKAGE_BOA is not set
+# BR2_PACKAGE_BRIDGE is not set
+# BR2_PACKAGE_CUSTOMIZE is not set
+# BR2_PACKAGE_ISC_DHCP is not set
+# BR2_PACKAGE_DIALOG is not set
+# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_DISTCC is not set
+# BR2_PACKAGE_DM is not set
+# BR2_PACKAGE_DMRAID is not set
+# BR2_PACKAGE_DNSMASQ is not set
+# BR2_PACKAGE_DROPBEAR is not set
+# BR2_PACKAGE_ETHTOOL is not set
+# BR2_PACKAGE_EXPAT is not set
+# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_FAKEROOT is not set
+# BR2_PACKAGE_FILE is not set
+# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_GETTEXT is not set
+# BR2_PACKAGE_LIBINTL is not set
+# BR2_PACKAGE_GZIP is not set
+# BR2_PACKAGE_HASERL is not set
+# BR2_PACKAGE_HDPARM is not set
+# BR2_PACKAGE_HOSTAP is not set
+# BR2_PACKAGE_HOTPLUG is not set
+# BR2_PACKAGE_IOSTAT is not set
+# BR2_PACKAGE_IPROUTE2 is not set
+# BR2_PACKAGE_IPSEC_TOOLS is not set
+# BR2_PACKAGE_IPTABLES is not set
+# BR2_PACKAGE_JPEG is not set
+# BR2_PACKAGE_LESS is not set
+# BR2_PACKAGE_LIBCGI is not set
+# BR2_PACKAGE_LIBCGICC is not set
+# BR2_PACKAGE_LIBELF is not set
+# BR2_PACKAGE_LIBFLOAT is not set
+# BR2_PACKAGE_LIBGLIB12 is not set
+# BR2_PACKAGE_LIBMAD is not set
+# BR2_PACKAGE_LIBPCAP is not set
+# BR2_PACKAGE_LIBPNG is not set
+# BR2_PACKAGE_LIBSYSFS is not set
+# BR2_PACKAGE_LIBTOOL is not set
+# BR2_PACKAGE_LIBUSB is not set
+# BR2_PACKAGE_LIGHTTPD is not set
+# BR2_PACKAGE_LINKS is not set
+# BR2_PACKAGE_LRZSZ is not set
+# BR2_PACKAGE_LSOF is not set
+# BR2_PACKAGE_LTP-TESTSUITE is not set
+# BR2_PACKAGE_LTT is not set
+# BR2_PACKAGE_LVM2 is not set
+# BR2_PACKAGE_LZO is not set
+# BR2_PACKAGE_LZMA is not set
+# BR2_PACKAGE_M4 is not set
+# BR2_PACKAGE_MDADM is not set
+# BR2_PACKAGE_MEMTESTER is not set
+# BR2_PACKAGE_MICROCOM is not set
+# BR2_PACKAGE_MICROPERL is not set
+# BR2_PACKAGE_MICROWIN is not set
+# BR2_PACKAGE_MKDOSFS is not set
+# BR2_PACKAGE_MODULE_INIT_TOOLS is not set
+# BR2_PACKAGE_MODUTILS is not set
+# BR2_PACKAGE_MPG123 is not set
+# BR2_PACKAGE_MROUTED is not set
+# BR2_PACKAGE_MTD is not set
+# BR2_PACKAGE_NANO is not set
+# BR2_PACKAGE_NCURSES is not set
+# BR2_PACKAGE_NETKITBASE is not set
+# BR2_PACKAGE_NETKITTELNET is not set
+# BR2_PACKAGE_NETSNMP is not set
+# BR2_PACKAGE_NEWT is not set
+# BR2_PACKAGE_NTP is not set
+# BR2_PACKAGE_OPENNTPD is not set
+# BR2_PACKAGE_OPENSSH is not set
+# BR2_PACKAGE_OPENSSL is not set
+# BR2_PACKAGE_OPENVPN is not set
+# BR2_PACKAGE_PCIUTILS is not set
+# BR2_PACKAGE_PKGCONFIG is not set
+# BR2_PACKAGE_PORTAGE is not set
+# BR2_PACKAGE_PORTMAP is not set
+# BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_PROCPS is not set
+# BR2_PACKAGE_PSMISC is not set
+# BR2_PACKAGE_PYTHON is not set
+# BR2_PACKAGE_QTE is not set
+BR2_QTE_TMAKE_VERSION="1.13"
+# BR2_PACKAGE_RAIDTOOLS is not set
+# BR2_READLINE is not set
+# BR2_PACKAGE_RSYNC is not set
+# BR2_PACKAGE_RUBY is not set
+# BR2_PACKAGE_RXVT is not set
+# BR2_PACKAGE_SDL is not set
+# BR2_PACKAGE_SFDISK is not set
+# BR2_PACKAGE_SLANG is not set
+# BR2_PACKAGE_SMARTMONTOOLS is not set
+# BR2_PACKAGE_SOCAT is not set
+# BR2_PACKAGE_STRACE is not set
+# BR2_PACKAGE_SUDO is not set
+# BR2_PACKAGE_SYSKLOGD is not set
+# BR2_PACKAGE_SYSVINIT is not set
+# BR2_PACKAGE_TCL is not set
+# BR2_PACKAGE_TCPDUMP is not set
+# BR2_PACKAGE_TFTPD is not set
+# BR2_PACKAGE_THTTPD is not set
+# BR2_PACKAGE_TINYLOGIN is not set
+# BR2_PACKAGE_TINYX is not set
+# BR2_PACKAGE_TN5250 is not set
+# BR2_PACKAGE_TTCP is not set
+# BR2_PACKAGE_UDEV is not set
+# BR2_PACKAGE_UDHCP is not set
+# BR2_PACKAGE_UEMACS is not set
+# BR2_PACKAGE_USBUTILS is not set
+# BR2_PACKAGE_UTIL-LINUX is not set
+# BR2_PACKAGE_VALGRIND is not set
+# BR2_PACKAGE_VTUN is not set
+# BR2_PACKAGE_WGET is not set
+# BR2_PACKAGE_WHICH is not set
+# BR2_PACKAGE_WIPE is not set
+# BR2_PACKAGE_WIRELESS_TOOLS is not set
+# BR2_PACKAGE_XFSPROGS is not set
+# BR2_PACKAGE_ZLIB is not set
+BR2_PACKAGE_HPING=y
+
+#
+# Target Options
+#
+
+#
+# filesystem for target device
+#
+# BR2_TARGET_ROOTFS_CRAMFS is not set
+# BR2_TARGET_ROOTFS_CLOOP is not set
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
+BR2_TARGET_ROOTFS_EXT2_INODES=0
+BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
+BR2_TARGET_ROOTFS_EXT2_SQUASH=y
+BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+# BR2_TARGET_ROOTFS_EXT2_GZ is not set
+BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+# BR2_TARGET_ROOTFS_JFFS2 is not set
+# BR2_TARGET_ROOTFS_SQUASHFS is not set
+# BR2_TARGET_ROOTFS_TAR is not set
+
+#
+# bootloader for target device
+#
+# BR2_TARGET_YABOOT is not set
+
+#
+# Board Support Options
+#
+
+#
+# Generic System Support
+#
+# BR2_TARGET_GENERIC_ACCESS_POINT is not set
+# BR2_TARGET_GENERIC_FIREWALL is not set
+# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
_______________________________________________
Xen-ppc-devel mailing list
Xen-ppc-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ppc-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-devel] Re: [XenPPC] [PATCH 6/6][TOOLS][XM-TEST] Add configuration data for powerpc,
Jimi Xenidis <=
|
|
|
Home