On Fri, 2005-10-21 at 13:59 -0400, Ted Kaczmarek wrote:
> On Fri, 2005-10-21 at 10:26 -0700, Nivedita Singhvi wrote:
> > Ted Kaczmarek wrote:
> > > On Fri, 2005-10-21 at 12:21 -0400, Ted Kaczmarek wrote:
> > >
> > >>Also noticed lots of scsi timeouts as well. I rebooted in stock FC4
> > >>kernel and do not see any problems with scsi or the 3c59x.
> > >>
> > >>
> > >>Did not see any of these issues with stock FC4 kernel.
> > >>
> > >>
> > >>
> > >>Regards,
> > >>Ted
> > >
> > >
> > > Just built from pristine source and see the same issue.
> > >
> > > Regards,
> > > Ted
> >
> > Ted, stupid question but did you mean mainline Linux?
> > i.e, is it a Xen issue?
> >
> > thanks,
> > Nivedita
>
> Timer ISR/1: Time went backwards: delta=-216859625 cpu_delta=3196141
> shadow=10003318252 off=999877946 processed=11220055766
> cpu_processed=11000000000
> 0: 11220055766
> 1: 11000000000
> SCSI subsystem initialized
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
> <Adaptec aic7899 Ultra160 SCSI adapter>
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>
>
>
> I missed that, didn't scroll up enough in the log files.
>
> This did not start until after the 2.6.12.5 patch was correctly applied
> from what I can tell.
>
> I need to try this as a monolithic kernel as well still.
>
>
>
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
> <Adaptec aic7899 Ultra160 SCSI adapter>
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
> (scsi0:A:0:0): parity error detected in DT Data-in phase. SEQADDR(0x1a6)
> SCSIRATE(0x0)
> Unexpected non-DT Data Phase
> scsi0:0:0:0: Attempting to queue an ABORT message
> CDB: 0x12 0x0 0x0 0x0 0x24 0x0
>
>
> ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 0000:00:0f.0: 3Com PCI 3c980C Python-T at 0x1c00. Vers LK1.1.19
> ***INVALID CHECKSUM 00c7*** <3>*** EEPROM MAC address is invalid.
> 3c59x: vortex_probe1 fails. Returns -22
> 3c59x: probe of 0000:00:0f.0 failed with error -22
> ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 19
> 0000:00:10.0: 3Com PCI 3c980C Python-T at 0x1c80. Vers LK1.1.19
> ***INVALID CHECKSUM 00c8*** <3>*** EEPROM MAC address is invalid.
> 3c59x: vortex_probe1 fails. Returns -22
> 3c59x: probe of 0000:00:10.0 failed with error -22
> Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI
> Copyright (c) 1999-2004 Intel Corporation.
> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
>
> [root@inyoureyes xen]# cat /proc/interrupts
> CPU0 CPU1
> 1: 8 0 Phys-irq i8042
> 9: 0 0 Phys-irq acpi
> 14: 21794 0 Phys-irq ide0
> 16: 7480 0 Phys-irq aic7xxx, peth0
> 17: 18046 0 Phys-irq aic7xxx
> 18: 0 0 Phys-irq EMU10K1
> 19: 98 0 Phys-irq ohci_hcd:usb1
> 256: 94140 0 Dynamic-irq timer0
> 257: 3037 0 Dynamic-irq resched0
> 258: 14 0 Dynamic-irq callfunc0
> 259: 0 3919 Dynamic-irq resched1
> 260: 0 2632 Dynamic-irq callfunc1
> 261: 0 15144 Dynamic-irq timer1
> 262: 7327 0 Dynamic-irq xenbus
> 263: 381 0 Dynamic-irq console
> 264: 0 0 Dynamic-irq net-be-dbg
> 265: 1359 0 Dynamic-irq blkif-backend
> 266: 2 0 Dynamic-irq blkif-backend
> 267: 1355 0 Dynamic-irq blkif-backend
> 268: 2 0 Dynamic-irq blkif-backend
> 269: 31 0 Dynamic-irq vif2.1
> 270: 1354 0 Dynamic-irq blkif-backend
> 271: 2 0 Dynamic-irq blkif-backend
> 272: 3510 0 Dynamic-irq blkif-backend
> 273: 49 0 Dynamic-irq blkif-backend
> 274: 28 0 Dynamic-irq vif4.1
> 275: 818 0 Dynamic-irq blkif-backend
> 276: 1 0 Dynamic-irq blkif-backend
> 277: 734 0 Dynamic-irq blkif-backend
> 278: 2 0 Dynamic-irq blkif-backend
> 279: 40 0 Dynamic-irq vif6.1
> 280: 607 0 Dynamic-irq blkif-backend
> 281: 2 0 Dynamic-irq blkif-backend
> 282: 10 0 Dynamic-irq vif7.1
> 283: 603 0 Dynamic-irq blkif-backend
> 284: 2 0 Dynamic-irq blkif-backend
> 285: 15 0 Dynamic-irq vif8.1
> 286: 796 0 Dynamic-irq blkif-backend
> 287: 2 0 Dynamic-irq blkif-backend
> 288: 795 0 Dynamic-irq blkif-backend
> 289: 3 0 Dynamic-irq blkif-backend
> 290: 41 0 Dynamic-irq vif10.1
> NMI: 0 0
> LOC: 0 0
> ERR: 0
> MIS: 0
>
>
> This above is with an e1000 for eth0.
>
> Ted
>
Changeset 7468:17a9f111fa93 does not have this problem.
Regards,
Ted
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home