On Fri, 2005-10-21 at 10:26 -0700, Nivedita Singhvi wrote:
> Ted Kaczmarek wrote:
> > On Fri, 2005-10-21 at 12:21 -0400, Ted Kaczmarek wrote:
> >
> >>Also noticed lots of scsi timeouts as well. I rebooted in stock FC4
> >>kernel and do not see any problems with scsi or the 3c59x.
> >>
> >>
> >>Did not see any of these issues with stock FC4 kernel.
> >>
> >>
> >>
> >>Regards,
> >>Ted
> >
> >
> > Just built from pristine source and see the same issue.
> >
> > Regards,
> > Ted
>
> Ted, stupid question but did you mean mainline Linux?
> i.e, is it a Xen issue?
>
> thanks,
> Nivedita
Timer ISR/1: Time went backwards: delta=-216859625 cpu_delta=3196141
shadow=10003318252 off=999877946 processed=11220055766
cpu_processed=11000000000
0: 11220055766
1: 11000000000
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
I missed that, didn't scroll up enough in the log files.
This did not start until after the 2.6.12.5 patch was correctly applied
from what I can tell.
I need to try this as a monolithic kernel as well still.
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:0d.1[B] -> GSI 17 (level, low) -> IRQ 17
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:0:0): parity error detected in DT Data-in phase. SEQADDR(0x1a6)
SCSIRATE(0x0)
Unexpected non-DT Data Phase
scsi0:0:0:0: Attempting to queue an ABORT message
CDB: 0x12 0x0 0x0 0x0 0x24 0x0
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0f.0: 3Com PCI 3c980C Python-T at 0x1c00. Vers LK1.1.19
***INVALID CHECKSUM 00c7*** <3>*** EEPROM MAC address is invalid.
3c59x: vortex_probe1 fails. Returns -22
3c59x: probe of 0000:00:0f.0 failed with error -22
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 19
0000:00:10.0: 3Com PCI 3c980C Python-T at 0x1c80. Vers LK1.1.19
***INVALID CHECKSUM 00c8*** <3>*** EEPROM MAC address is invalid.
3c59x: vortex_probe1 fails. Returns -22
3c59x: probe of 0000:00:10.0 failed with error -22
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
[root@inyoureyes xen]# cat /proc/interrupts
CPU0 CPU1
1: 8 0 Phys-irq i8042
9: 0 0 Phys-irq acpi
14: 21794 0 Phys-irq ide0
16: 7480 0 Phys-irq aic7xxx, peth0
17: 18046 0 Phys-irq aic7xxx
18: 0 0 Phys-irq EMU10K1
19: 98 0 Phys-irq ohci_hcd:usb1
256: 94140 0 Dynamic-irq timer0
257: 3037 0 Dynamic-irq resched0
258: 14 0 Dynamic-irq callfunc0
259: 0 3919 Dynamic-irq resched1
260: 0 2632 Dynamic-irq callfunc1
261: 0 15144 Dynamic-irq timer1
262: 7327 0 Dynamic-irq xenbus
263: 381 0 Dynamic-irq console
264: 0 0 Dynamic-irq net-be-dbg
265: 1359 0 Dynamic-irq blkif-backend
266: 2 0 Dynamic-irq blkif-backend
267: 1355 0 Dynamic-irq blkif-backend
268: 2 0 Dynamic-irq blkif-backend
269: 31 0 Dynamic-irq vif2.1
270: 1354 0 Dynamic-irq blkif-backend
271: 2 0 Dynamic-irq blkif-backend
272: 3510 0 Dynamic-irq blkif-backend
273: 49 0 Dynamic-irq blkif-backend
274: 28 0 Dynamic-irq vif4.1
275: 818 0 Dynamic-irq blkif-backend
276: 1 0 Dynamic-irq blkif-backend
277: 734 0 Dynamic-irq blkif-backend
278: 2 0 Dynamic-irq blkif-backend
279: 40 0 Dynamic-irq vif6.1
280: 607 0 Dynamic-irq blkif-backend
281: 2 0 Dynamic-irq blkif-backend
282: 10 0 Dynamic-irq vif7.1
283: 603 0 Dynamic-irq blkif-backend
284: 2 0 Dynamic-irq blkif-backend
285: 15 0 Dynamic-irq vif8.1
286: 796 0 Dynamic-irq blkif-backend
287: 2 0 Dynamic-irq blkif-backend
288: 795 0 Dynamic-irq blkif-backend
289: 3 0 Dynamic-irq blkif-backend
290: 41 0 Dynamic-irq vif10.1
NMI: 0 0
LOC: 0 0
ERR: 0
MIS: 0
This above is with an e1000 for eth0.
Ted
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home