On 30/08/05, Ian Pratt <m+Ian.Pratt@xxxxxxxxxxxx> wrote:
>
> This is a pretty odd failure, as everything seems to be going fine with
> the ACPI configuration right up until the ata_piix probe failure.
>
> The only thing I can suggest is to add some "printk(KERN_ALERT" tracing
> to the init function of the driver and see where its failing...
>
> My guess is that it fails for some other reason before it tries using
> ACPI to plumb the interrupt.
I think you're right as the pata driver omits the cd detect just
before the ata_piix failing.
I've cut the kernels down, removing usb and a bunch of stuff, ensuring
settings are identical. Here's a diff between from
xen(fails)->native(works). As you can see there really aren't that
many differences.. maybe you can spot something significant?
-Linux version 2.6.12.5-xen (root@xenmaster) (gcc version 3.4.4
(Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) #7 Tue Aug 30 17:13:19 GMT
2005
+Linux version 2.6.12.5 (root@xenmaster) (gcc version 3.4.4 (Gentoo
3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) #10 Tue Aug 30 17:10:32 GMT 2005
BIOS-provided physical RAM map:
- Xen: 0000000000000000 - 0000000006000000 (usable)
-96MB LOWMEM available.
-On node 0 totalpages: 24576
- DMA zone: 24576 pages, LIFO batch:15
- Normal zone: 0 pages, LIFO batch:1
- HighMem zone: 0 pages, LIFO batch:1
+ BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
+ BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
+ BIOS-e820: 0000000000100000 - 000000003fe8cc00 (usable)
+ BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
+ BIOS-e820: 000000003fe8ec00 - 000000003fe90c00 (ACPI data)
+ BIOS-e820: 000000003fe90c00 - 0000000040000000 (reserved)
+ BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
+ BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
+ BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
+ BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
+ BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
+Warning only 896MB will be used.
+Use a HIGHMEM enabled kernel.
+896MB LOWMEM available.
found SMP MP-table at 000fe710
-DMI 2.3 present.
-Intel MultiProcessor Specification v1.4
- Virtual Wire compatibility mode.
-OEM ID: DELL Product ID: PE SC430 APIC at: 0xFEE00000
-I/O APIC #8 Version 32 at 0xFEC00000.
-Enabling APIC mode: Flat. Using 1 I/O APICs
-Processors: 1
-IRQ lockup detection disabled
-Allocating PCI resources starting at 06000000 (gap: 06000000:fa000000)
-Built 1 zonelists
-Kernel command line: root=/dev/md2 noreboot console=ttyS0 debug
-Initializing CPU#0
-PID hash table entries: 512 (order: 9, 8192 bytes)
-Xen reported: 2793.118 MHz processor.
-Console: colour VGA+ 80x25
-Linux version 2.6.12.5-xen (root@xenmaster) (gcc version 3.4.4
(Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) #7 Tue Aug 30 17:13:19 GMT
2005
-BIOS-provided physical RAM map:
- Xen: 0000000000000000 - 0000000006000000 (usable)
-96MB LOWMEM available.
-On node 0 totalpages: 24576
- DMA zone: 24576 pages, LIFO batch:15
- Normal zone: 0 pages, LIFO batch:1
+On node 0 totalpages: 229376
+ DMA zone: 4096 pages, LIFO batch:1
+ Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
-found SMP MP-table at 000fe710
DMI 2.3 present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: PE SC430 APIC at: 0xFEE00000
+Processor #0 15:4 APIC version 20
I/O APIC #8 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
-IRQ lockup detection disabled
-Allocating PCI resources starting at 06000000 (gap: 06000000:fa000000)
+Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
Built 1 zonelists
-Kernel command line: root=/dev/md2 noreboot console=ttyS0 debug
+Kernel command line: ro root=/dev/md2 console=ttyS0 debug
+mapped APIC to ffffd000 (fee00000)
+mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
-PID hash table entries: 512 (order: 9, 8192 bytes)
-Xen reported: 2793.118 MHz processor.
+PID hash table entries: 4096 (order: 12, 65536 bytes)
+Detected 2794.172 MHz processor.
+Using tsc for high-res timesource
Console: colour VGA+ 80x25
-Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
-Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
-vmalloc area: c6800000-fbeec000, maxmem 34000000
-Memory: 94592k/98304k available (1739k kernel code, 3628k reserved,
511k data, 124k init, 0k highmem)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 906492k/917504k available (1577k kernel code, 10560k
reserved, 692k data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay loop... 5583.66 BogoMIPS (lpj=27918336)
+Calibrating delay loop... 5505.02 BogoMIPS (lpj=2752512)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000641d 00000000 00000000
+monitor/mwait feature present.
+using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
-CPU: After all inits, caps: bfebd3f1 20100000 00000000 00000080
0000641d 00000000 00000000
+CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080
0000641d 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
-Checking 'hlt' instruction... disabled
+Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
+..TIMER: vector=0x31 pin1=2 pin2=0
NET: Registered protocol family 16
+PCI: PCI BIOS revision 2.10 entry at 0xfbcb2, last bus=5
PCI: Using configuration type 1
-xen_mem: Initialising balloon driver.
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
@@ -86,7 +79,6 @@
PCI->APIC IRQ transform: 0000:00:1f.2[C] -> IRQ 20
PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 17
-Grant table initialized
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
@@ -116,26 +108,99 @@
eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)]
(PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:12:3f:71:ed:be
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
-WARNING: Failed to register Xen virtual console driver as 'ttyS0'
-Event-channel device installed.
libata version 1.11 loaded.
ata_piix version 1.03
-ata_piix: probe of 0000:00:1f.2 failed with error -12
+PCI: Setting latency timer of device 0000:00:1f.2 to 64
+ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 20
+ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 20
+ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
+ata1: dev 0 ATA, max UDMA/133, 312500000 sectors: lba48
+ata1: dev 1 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
+ata1: dev 1 ATA, max UDMA/133, 312500000 sectors: lba48
+ata1: dev 0 configured for UDMA/133
+ata1: dev 1 configured for UDMA/133
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home