I've read the posts where the other users have been reporting Dell
boxes hanging. I can readily reproduce the symtom, and hopefully
provide some extra info.
This is for a Xen project for work. I have it running on a
development box with different hardware with no problems whatsoever.
However, for the rollout stage, Dell 2850's are to be used w/ the PERC
4e/Di controller (new megaraid driver).
I've tried xen-2.0-testing, 2.0.6 and 2.0.4 (all compiled from source), and
the boxes "lock up" exactly the same way. Basically, I (re)boot the
box to the 2.6.11.10-xen0 (or 2.6.11.12-xen0) kernel, ssh in, issue
`vgscan; vgchange -ay; mkfs.ext3 /dev/lvm/device` and it'll proceed
briefly then appear to be completely locked up (network dies),
keyboard doesn't respond (can't toggle caps lock), etc.
However, one time I just decided to let it sit there (over lunch) and
upon returning, was able to log in using the console. Examining the
dmesg, I noticed:
Jul 18 12:36:18 xen0 megaraid: aborting-17662 cmd=2a <c=2 t=0 l=0>
Jul 18 12:36:18 xen0 megaraid abort: scsi cmd:17662, do now own
repeated over and over again.
I tried disabling USB (via nousb boot param), and it locks up exactly
the same way.
Booting the normal vmlinuz-2.6.12-gentoo-r4 kernel and performing the
same steps do not lock up the box.
Please let me know if there's any additional info you'd like me to
provide or anything else you'd like me to try. If this issue cannot
be resolved, then I'll obviously have to scrap the Xen project. And
having played with UMLs, I'd rather not have to touch that if possible
at all.
Thanks,
Shane
# uname -a
Linux xen0 2.6.11.12-xen0 #3 Thu Jul 14 11:16:17 PDT 2005 i686
Intel(R) Xeon(TM) CPU 3.20GHz GenuineIntel GNU/Linux
# lspci -v
0000:00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 09)
Subsystem: Dell: Unknown device 016d
Flags: bus master, fast devsel, latency 0
Capabilities: [40] #09 [4105]
0000:00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI
Express Port A (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
Memory behind bridge: dfc00000-dfefffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d8000000
Secondary status: SERR
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit-
Queue=0/1 Enable-
Capabilities: [64] #10 [0041]
0000:00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express
Port B (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit-
Queue=0/1 Enable-
Capabilities: [64] #10 [0041]
0000:00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1
(rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: df700000-dfbfffff
Secondary status: SERR
Expansion ROM at 0000d000 [disabled] [size=8K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit-
Queue=0/1 Enable-
Capabilities: [64] #10 [0041]
0000:00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C
(rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=08, subordinate=0a, sec-latency=0
Memory behind bridge: df600000-df6fffff
Secondary status: SERR
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit-
Queue=0/1 Enable-
Capabilities: [64] #10 [0041]
0000:00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 016d
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at bce0 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 016d
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at bcc0 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell: Unknown device 016d
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at bca0 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell: Unknown device 016d
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at dff00000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: df400000-df5fffff
Prefetchable memory behind bridge: d0000000-d7ffffff
0000:00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R)
IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell: Unknown device 016d
Flags: bus master, medium devsel, latency 0
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at fc00 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
0000:01:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O
processor (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Memory behind bridge: dfd00000-dfefffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d8000000
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
0000:01:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O
processor (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=01, secondary=03, subordinate=03, sec-latency=64
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID
controller 4 (rev 06)
Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Di
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 38
Memory at d80f0000 (32-bit, prefetchable) [size=dfe00000]
Memory at dfdc0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 00020000 [disabled]
Capabilities: [c0] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
Capabilities: [e0] PCI-X non-bridge device.
0000:05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge A (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dfa00000-dfbfffff
Expansion ROM at 0000e000 [disabled] [size=4K]
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
0000:05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge B (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df800000-df9fffff
Expansion ROM at 0000d000 [disabled] [size=4K]
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
0000:06:07.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
Ethernet Controller (rev 05)
Subsystem: Dell: Unknown device 016d
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 48
Memory at dfae0000 (32-bit, non-prefetchable)
I/O ports at ecc0 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
0000:07:08.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
Ethernet Controller (rev 05)
Subsystem: Dell: Unknown device 016d
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 49
Memory at df8e0000 (32-bit, non-prefetchable)
I/O ports at dcc0 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
0000:08:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge A (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=08, secondary=09, subordinate=09, sec-latency=64
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
0000:08:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI
Bridge B (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=64
Capabilities: [44] #10 [0071]
Capabilities: [5c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [6c] Power Management version 2
Capabilities: [d8]
0000:0b:0d.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: Dell: Unknown device 016d
Flags: bus master, VGA palette snoop, stepping, medium devsel,
latency 32, IRQ 18
Memory at d0000000 (32-bit, prefetchable)
I/O ports at cc00 [size=256]
Memory at df4f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
# cat /proc/interrupts
CPU0
1: 8 Phys-irq i8042
8: 2 Phys-irq rtc
14: 29 Phys-irq ide0
16: 41014 Phys-irq uhci_hcd
18: 931 Phys-irq uhci_hcd
19: 10 Phys-irq uhci_hcd
23: 24 Phys-irq ehci_hcd
38: 1848 Phys-irq megaraid
48: 14018 Phys-irq eth0
128: 1 Dynamic-irq misdirect
129: 0 Dynamic-irq ctrl-if
130: 78781 Dynamic-irq timer
131: 0 Dynamic-irq console
132: 0 Dynamic-irq net-be-dbg
NMI: 0
ERR: 0
# gcc -v
Reading specs from /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.5-20050130/specs
Configured with:
/var/tmp/portage/gcc-3.3.5.20050130-r1/work/gcc-3.3.5/configure
--enable-version-specific-runtime-libs --prefix=/usr
--bindir=/usr/i686-pc-linux-gnu/gcc-bin/3.3.5-20050130
--includedir=/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.5-20050130/include
--datadir=/usr/share/gcc-data/i686-pc-linux-gnu/3.3.5-20050130
--mandir=/usr/share/gcc-data/i686-pc-linux-gnu/3.3.5-20050130/man
--infodir=/usr/share/gcc-data/i686-pc-linux-gnu/3.3.5-20050130/info
--with-gxx-include-dir=/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.5-20050130/include/g++-v3
--host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec
--enable-nls --without-included-gettext --with-system-zlib
--disable-checking --disable-werror --disable-libunwind-exceptions
--disable-multilib --disable-libgcj --enable-languages=c,c++,f77
--enable-shared --enable-threads=posix --enable-__cxa_atexit
--enable-clocale=gnu
Thread model: posix
gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1,
ssp-3.3.5.20050130-1, pie-8.7.7.1)
# xm dmesg
ERROR: cannot use unconfigured serial port COM1
__ __ ____ ___ _ _ _
\ \/ /___ _ __ |___ \ / _ \ | |_ ___ ___| |_(_)_ __ __ _
\ // _ \ '_ \ __) || | | |__| __/ _ \/ __| __| | '_ \ / _` |
/ \ __/ | | | / __/ | |_| |__| || __/\__ \ |_| | | | | (_| |
/_/\_\___|_| |_| |_____(_)___/ \__\___||___/\__|_|_| |_|\__, |
|___/
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 2.0-testing (root@(none)) (gcc version 3.3.5-20050130
(Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) Thu Jul
14 11:26:28 PDT 2005
Latest ChangeSet: information unavailable
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 000000003ffc0000 (usable)
(XEN) 000000003ffc0000 - 000000003ffcfc00 (ACPI data)
(XEN) 000000003ffcfc00 - 000000003ffff000 (reserved)
(XEN) 00000000e0000000 - 00000000fec90000 (reserved)
(XEN) 00000000fed00000 - 00000000fed00400 (reserved)
(XEN) 00000000fee00000 - 00000000fee10000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1047936kB)
(XEN) Xen heap: 10MB (10764kB)
(XEN) CPU0: Before vendor init, caps: bfebfbff 20100000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: bfebfbff 20100000 00000000 00000000
(XEN) found SMP MP-table at 000fe710
(XEN) ACPI: RSDP (v000 DELL ) @ 0x000fd650
(XEN) ACPI: RSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd664
(XEN) ACPI: FADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd6b0
(XEN) ACPI: MADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd724
(XEN) ACPI: SPCR (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd7cc
(XEN) ACPI: HPET (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd81c
(XEN) ACPI: MCFG (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x000fd854
(XEN) ACPI: DSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000e) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 Unknown CPU [15:4] APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
(XEN) Processor #6 Unknown CPU [15:4] APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
(XEN) Processor #1 Unknown CPU [15:4] APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
(XEN) Processor #7 Unknown CPU [15:4] APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: DELL Product ID: PE 016D APIC at: 0xFEE00000
(XEN) I/O APIC #8 Version 32 at 0xFEC00000.
(XEN) I/O APIC #9 Version 32 at 0xFEC80000.
(XEN) I/O APIC #10 Version 32 at 0xFEC83000.
(XEN) I/O APIC #11 Version 32 at 0xFEC84000.
(XEN) Enabling APIC mode: Flat. Using 4 I/O APICs
(XEN) Processors: 4
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 3192.149 MHz processor.
(XEN) CPU0: Before vendor init, caps: bfebfbff 20100000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: bfebfbff 20100000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU1: Before vendor init, caps: bfebfbff 20100000 00000000, vendor = 0
(XEN) CPU#1: Physical ID: 0, Logical ID: 1
(XEN) CPU caps: bfebfbff 20100000 00000000 00000000
(XEN) CPU1 has booted.
(XEN) Booting processor 2/6 eip 90000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU2: Before vendor init, caps: bfebfbff 20100000 00000000, vendor = 0
(XEN) CPU#2: Physical ID: 3, Logical ID: 0
(XEN) CPU caps: bfebfbff 20100000 00000000 00000000
(XEN) CPU2 has booted.
(XEN) Booting processor 3/7 eip 90000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU3: Before vendor init, caps: bfebfbff 20100000 00000000, vendor = 0
(XEN) CPU#3: Physical ID: 3, Logical ID: 1
(XEN) CPU caps: bfebfbff 20100000 00000000 00000000
(XEN) CPU3 has booted.
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 8 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 8 ... ok.
(XEN) Setting 9 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 9 ... ok.
(XEN) Setting 10 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 10 ... ok.
(XEN) Setting 11 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 11 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=2 pin2=0
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 3192.1249 MHz.
(XEN) ..... Bus speed is 199.5077 MHz.
(XEN) ..... bus_scale = 0x0000CC4F
(XEN) checking TSC synchronization across CPUs: passed.
(XEN) Time init:
(XEN) .... System Time: 954414204ns
(XEN) .... cpu_freq: 00000000:BE445520
(XEN) .... scale: 00000001:40C97903
(XEN) .... Wall Clock: 1121792577s 170000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfbf0e, last bus=11
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
(XEN) Transparent bridge - PCI device 8086:244e
(XEN) PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
(XEN) PCI->APIC IRQ transform: (B0,I2,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B0,I4,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B0,I5,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B0,I6,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B0,I29,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B0,I29,P1) -> 19
(XEN) PCI->APIC IRQ transform: (B0,I29,P2) -> 18
(XEN) PCI->APIC IRQ transform: (B0,I29,P3) -> 23
(XEN) PCI->APIC IRQ transform: (B2,I14,P0) -> 38
(XEN) PCI->APIC IRQ transform: (B6,I7,P0) -> 48
(XEN) PCI->APIC IRQ transform: (B7,I8,P0) -> 49
(XEN) PCI->APIC IRQ transform: (B11,I13,P0) -> 18
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 00c00000->00ef931c
(XEN) Initrd image: 00000000->00000000
(XEN) Dom0 alloc.: 01000000->11000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04223b4
(XEN) Init. ramdisk: c0423000->c0423000
(XEN) Phys-Mach map: c0423000->c0463000
(XEN) Page tables: c0463000->c0466000
(XEN) Start info: c0466000->c0467000
(XEN) Boot stack: c0467000->c0468000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: ...done.
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home