|
|
|
|
|
|
|
|
|
|
xen-devel
Re: [Xen-devel] Xeno-unstable crashing at boot
Is this on x86_64? If so, we've opened up a defect on the xensource
bugzilla system:
http://bugzilla.xensource.com/cgi-bin/bugzilla/show_bug.cgi?id=26
On Fri, 2005-05-13 at 19:26 +0100, Mike Wray wrote:
> I'm getting the following crash every time I boot xeno-unstable.
>
> Mike
>
> Xen version 3.0-devel (mjw@xxxxxxxxxx) (gcc version 3.2.2 20030222 (Red Hat
> Linux 3.2.2-5)) Fri
> May 13 15:30:05 BST 2005
> Latest ChangeSet: 2005/05/13 15:37:25 1.1401 4284bba5zgcyWRg6WwOIZIaOia4E2g
>
> (XEN) Physical RAM map:
> (XEN) 0000000000000000 - 000000000009fc00 (usable)
> (XEN) 000000000009fc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e8000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 000000007fff7b00 (usable)
> (XEN) 000000007fff7b00 - 0000000080000000 (reserved)
> (XEN) 00000000fec00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 2047MB (2096728kB)
> (XEN) Xen heap: 10MB (10756kB)
> (XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
> (XEN) CPU#0: Physical ID: 0, Logical ID: 0
> (XEN) CPU caps: afebfbff 00000000 00000000 00000000
> (XEN) found SMP MP-table at 000f9bf0
> (XEN) ACPI: RSDP (v000 COMPAQ ) @ 0x000ea810
> (XEN) ACPI: RSDT (v001 COMPAQ CPQ0054 0x20030821 0x00000000) @ 0x7fff7b40
> (XEN) ACPI: FADT (v001 COMPAQ PLACER 0x00000001 0x00000000) @ 0x7fff7bf8
> (XEN) ACPI: SSDT (v001 COMPAQ PROJECT 0x00000001 MSFT 0x0100000e) @
> 0x7fff894d
> (XEN) ACPI: SSDT (v001 COMPAQ CORE_PNP 0x00000001 MSFT 0x0100000e) @
> 0x7fff8ee7
> (XEN) ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000e) @
> 0x7fff9433
> (XEN) ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000e) @
> 0x7fff95ce
> (XEN) ACPI: SSDT (v001 COMPAQ LGCYLITE 0x00000001 MSFT 0x0100000e) @
> 0x7fff98d6
> (XEN) ACPI: SSDT (v001 COMPAQ UART2 0x00000001 MSFT 0x0100000e) @
> 0x7fff9e15
> (XEN) ACPI: SSDT (v001 COMPAQ FLOPPY 0x00000001 MSFT 0x0100000e) @
> 0x7fff9f7c
> (XEN) ACPI: MADT (v001 COMPAQ PLACER 0x00000001 0x00000000) @ 0x7fff7c6c
> (XEN) ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000e) @
> 0x7fffba41
> (XEN) ACPI: ASF! (v016 COMPAQ PLACER 0x00000001 0x00000000) @ 0x7fff7cf0
> (XEN) ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000e) @
> 0x7fffa538
> (XEN) ACPI: SSDT (v001 COMPAQ UR2_PRSS 0x00000001 MSFT 0x0100000e) @
> 0x7fffa95c
> (XEN) ACPI: SSDT (v001 COMPAQ FPY_PRSS 0x00000001 MSFT 0x0100000e) @
> 0x7fffaac9
> (XEN) ACPI: SSDT (v001 COMPAQ S1 0x00000001 MSFT 0x0100000e) @
> 0x7fffabe2
> (XEN) ACPI: SSDT (v001 COMPAQ L08 0x00000001 MSFT 0x0100000e) @
> 0x7fffb7e4
> (XEN) ACPI: SSDT (v001 COMPAQ FINIS 0x00000001 MSFT 0x0100000e) @
> 0x7fffbbdc
> (XEN) ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @
> 0x00000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
> (XEN) Processor #6 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Using scheduler: Borrowed Virtual Time (bvt)
> (XEN) Initializing CPU#0
> (XEN) Detected 2791.093 MHz processor.
> (XEN) CPU0 booted
> (XEN) Booting processor 1/6 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU1: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
> (XEN) CPU#1: Physical ID: 3, Logical ID: 0
> (XEN) CPU caps: afebfbff 00000000 00000000 00000000
> (XEN) CPU1 has booted.
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) checking TSC synchronization across CPUs: passed.
> (XEN) Time init:
> (XEN) .... cpu_freq: 00000000:A65CB560
> (XEN) .... scale: 00000001:6EE19BBD
> (XEN) .... Wall Clock: 1115998803s 140000us
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
> 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,LOADER=generic'
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 08000000->10000000
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: c0100000->c05d00e0
> (XEN) Init. ramdisk: c05d1000->c05d1000
> (XEN) Phys-Mach map: c05d1000->c05f1000
> (XEN) Page tables: c05f1000->c05f4000
> (XEN) Start info: c05f4000->c05f5000
> (XEN) Boot stack: c05f5000->c05f6000
> (XEN) TOTAL: c0000000->c0800000
> (XEN) ENTRY ADDRESS: c0100000
> (XEN) Scrubbing Free RAM: .....................done.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
> Xen).
> (XEN) BUG at domain.c:125
> (XEN) CPU: 0
> (XEN) EIP: 0808:[<ff10618c>]
> (XEN) EFLAGS: 00210296 CONTEXT: hypervisor
> (XEN) eax: 00000000 ebx: ffbf6900 ecx: 000003f8 edx: 00000000
> (XEN) esi: ffbf3080 edi: c0453729 ebp: 00000002 esp: ff103f88
> (XEN) ds: 0810 es: 0810 fs: 0810 gs: 0810 ss: 0810 cs: 0808
> (XEN) Stack trace from ESP=ff103f88:
> (XEN) ff143308 ff143347 0000007d c0102ff4 c0453729 ffbf3080 c0102ff4
> [ff106198]
> (XEN) [ff106190] 00000808 00210292 [ff135165] 00002834 fbff1000 00000432
> 00000024
> (XEN) c0453729 00000002 00000000 000e0000 00000000 00000819 00210217
> c0103000
> (XEN) 00000821 00000821 00000821 00000000 00000000 ffbf3080
> (XEN) Call Trace from ESP=ff103f88:
> (XEN) [<ff106198>] [<ff106190>] [<ff135165>]
>
> ****************************************
> CPU0 FATAL TRAP: vector = 6 (invalid operand)
> [error_code=0000]
> Aieee! CPU0 is toast...
> ****************************************
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
--
Regards,
David F Barrera
Linux Technology Center
Systems and Technology Group, IBM
"The wisest men follow their own direction. "
Euripides
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
|
|