[Xen-devel] Re: Booting Xen/ia64

[Andreas Hirstius <Andreas.Hirstius@xxxxxxx>]

Hi,

On our boxes the access to the serial console is done via the management 
processor, so the baud rate is limited to 9600 :-(
If this a problem, I can use another serial port on the machine.

One of the firmware versions might be a problem, since the machine is 
quite old (more than 2 years).
But the latest available firmware (2.31) is installed...
Here is a dump of "info fw" in the EFI shell:


FIRMWARE INFORMATION

  Firmware Revision: 2.31 [4411]

  PAL_A Revision: 7.31/5.37
  PAL_B Revision: 5.65

  SAL Spec Revision: 3.01
  SAL_A Revision: 2.00
  SAL_B Revision: 2.31

  EFI Spec Revision: 1.10
  EFI Intel Drop Revision: 14.61
  EFI Build Revision: 1.22

  POSSE Revision: 0.10

  ACPI Revision: 7.00

  BMC Revision 1.52
  IPMI Revision: 1.00
  SMBIOS Revision: 2.3.2a
  Management Processor Revision: E.02.10


With standard Linux the output goes to both consoles, except the part 
where the services start up.
Andreas

Magenheimer, Dan (HP Labs Fort Collins) wrote:

> > This is on both serial and video. And yes, "root=/dev/sda2" 
> > works with standard Linux.
> > It's an rx2600.
> >    
> Hmmm... mysterious.  This is the same box I am using and the
> same bits.  Perhaps a baud rate problem on the serial port?
> The hack I mentioned assumes 115200.  (This can be configured
> via the EFI shell.)  When I am running Linux, I use
> "console=ttyS0,115200" but I don't know if specifying a
> different baud rate for Xen/ia64 will work (yet).
>
> Otherwise could be different firmware versions, but one wouldn't
> expect that to cause this kind of a problem.
>
> When you boot real Linux with the same console= are you getting
> boot output on the VGA display?
>
> Dan
>
>  
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel