|
|
|
|
|
|
|
|
|
|
xen-devel
[Xen-devel] Re: Booting Xen/ia64
On Tue, Jan 11, 2005 at 10:21:53AM -0800, Magenheimer, Dan (HP Labs Fort
Collins) wrote:
>
> > I've then applied the privify tool to the vmlinux kernel.
> >
> > Then I've put the resulting xenolinux and xen binaries into
> > /boot/efi/efi/redhat/, made a symlink "ln -s
> > /boot/efi/efi/redhat/xen /boot/xen", and put the following in
> > /etc/elilo.conf:
> >
> > default=xen
> >
> > image=xen
> > label=xen
> > initrd=xenlinux
> > read-only
> > append="nomca console=simcons console=ttyS0
> > console=tty0 root=/dev/sda2"
> >
> > However, when I boot nothing happens. This is the output:
> >
> > Loading xen...Loading Linux... ..done
> >
> > Loading initrd xenlinux...done
>
> Is this on a serial output or on a video screen? If the latter,
> try hooking up a serial output (and verify that it works with
> regular Linux). It's possible that Xen is booting xenlinux
> fine and you may eventually see xenlinux output on the video
> screen. If not, are you sure "root=/dev/sda2" works for booting
> standard Linux?
>
This is on both serial and video. And yes, "root=/dev/sda2" works with standard
Linux.
> What hardware are you using? I have been working with another
> Xen/ia64 developer (I'll leave it up to him to post and identify
> himself if he wishes) on a serial problem; Xen/ia64 has a hack for
> serial output that apparently does not work on his box. I'm
> looking into a more generic solution (which got added to Linux/ia64
> at 2.6.10).
It's an rx2600.
Håvard
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-devel] RE: Booting Xen/ia64, Magenheimer, Dan (HP Labs Fort Collins)
- [Xen-devel] Re: Booting Xen/ia64,
Håvard Bjerke <=
- [Xen-devel] RE: Booting Xen/ia64, Magenheimer, Dan (HP Labs Fort Collins)
- [Xen-devel] RE: Booting Xen/ia64, Magenheimer, Dan (HP Labs Fort Collins)
- [Xen-devel] Re: Booting Xen/ia64, Håvard Bjerke
- [Xen-devel] Re: Booting Xen/ia64, Håvard Bjerke
- [Xen-devel] RE: Booting Xen/ia64, Magenheimer, Dan (HP Labs Fort Collins)
- [Xen-devel] RE: Booting Xen/ia64, Magenheimer, Dan (HP Labs Fort Collins)
|
|
|
|
|